REPAIR/REPLACEMENT OF LT UNDERGROUND CABLES, SECURITY LIGHTS, GARDEN LIGHTS, PAINTING OF POLES AND MISC WORKS AT KHANPUR, DUNDAHER AND MANESAR ARMY CAMP UNDER AGE E/M OF GE (SOUTH) DELHI CANTT-10

Amount

Supply and Laying in replacement of XLPE insulated screened, PVC Bedded, galvanised steel strip or wire armoured, electric power cables(heavy duty ) with aluminium conductor, 11000 volts grade cross sectional area 95 Sqmm 3 Core, laid in trenches or fixed on pole etc complete all as specified and directed by Engr-in-Charge.

Supply and laying in replacement of 10 Sqmm x 2 Core XLPE insulated armoured (heavy duty) electric cable with aluminium stranded conductor 1100 volts complete all as specified and directed by Engr-in-Charge.

All as Srl item No. 02 above but 16 Sqmm x 2 Core.

All as Srl item No. 02 above but 25 Sqmm x 2 Core.

All as Srl item No. 02 above but 35 sqmm x 3.5 Core.

All as Srl item No. 02 above but 50 sqmm x 3.5 Core.

All as Srl item No. 02 here-in-before but 70 Sqmm x 3.5 Core.

All as Srl item No. 02 here-in-before but 95 Sqmm x 3.5 Core.

All as Srl item No. 02 here-in-before but 120 Sqmm X 3.5 Core.

All as Srl item No. 02 here-in-before but 150 Sqmm X 3.5 Core.

All as Srl item No. 02 here-in-before but 185 Sqmm X 3.5 Core.

All as Srl item No. 02 here-in-before but 300 Sqmm x 3.5 Core.

Supply, installation, testing and commissioning in replacement of LT panel 3.15 mm thick cubical outdoor type weather proof, totally enclosed with IP 65 protection made out of CRC sheet angle iron of size 40 mm x 40 mm x 6 mm suitable for 3 phase, 4 wire ,440 volts, 50 Hz including cable glands, phase indicators, internal wiring,CT of suitable Ratio, voltmeter, ammeter, air passing holes with proper spacing to accommodate to all control switches and other accessories, cable connections with suitable size of lugs/thimble etc and locking arrangement with two locks godown type welded inside of the shutter with duplicate keys, spray painting with two coats of light gray paint over a coat of red oxide primer and mounted on two No bricks pillars including excavation and earth work complete PCC (1:2:4), brick work (1:4), plastering (1:6) and painting complete all as specified and directed by Engr-in-Charge and comprising of following accessories:- INCOMING:- (a) MCCB 4 Pole 630 Amp 415 volts 36 KA =01No. (b) Aluminium bus bar 950 Amps with insulator-04 Nos. (c) 3 phase Multifunction meter of suitable range/size.-01 Nos. (d) CT ratio of suitable size-01 set (set of three). (e) Indication lamp – one set(set of three). OUTGOING:- (a) MCCB 4 Pole 200 Amps 415 Volts 25 KA - 01 Nos. (b) MCCB 4 Pole 250 Amps 415 Volts 25 KA - 01 Nos. (c) MCCB 4 Pole 160 Amps 415 Volts 25 KA - 04 Nos

Supply, installation, testing and commissioning in replacement of LT panel 3.15 mm thick cubical outdoor type weather proof, totally enclosed with IP 65 protection made out of CRC sheet angle iron of size 40 mm x 40 mm x 6 mm suitable for 3 phase, 4 wire ,440 volts, 50 Hz including cable glands, phase indicators, internal wiring,CT of suitable Ratio, voltmeter, ammeter, air passing holes with proper spacing to accommodate to all control switches and other accessories, cable connections with suitable size of lugs/thimble etc and locking arrangement with two locks godown type welded inside of the shutter with duplicate keys, spray painting with two coats of light gray paint over a coat of red oxide primer and mounted on two No bricks pillars including excavation and earth work complete PCC (1:2:4), brick work (1:4), plastering (1:6) and painting complete all as specified and directed by Engr-in-Charge and comprising of following accessories:- INCOMING (a) MCCB 4 Pole 350 Amp 415 volts 36 KA =01No. (b) Aluminium bus bar 525 Amps with insulator-04 Nos. (c) 3 phase Multifunction meter of suitable range/size.-01 Nos. (d) CT ratio of suitable size-01 set (set of three). (e) Indication lamp – one set(set of three). OUTGOING (i) MCCB 3 Pole 125 Amps 415 Volts 25 KA - 04 Nos.

Supply, installation, testing and commissioning in replacement of LT panel 3.15 mm thick cubical outdoor type weather proof, totally enclosed with IP 65 protection made out of CRC sheet angle iron of size 40 mm x 40 mm x 6 mm suitable for 3 phase, 4 wire ,440 volts, 50 Hz including cable glands, phase indicators, internal wiring,CT of suitable Ratio, voltmeter, ammeter, air passing holes with proper spacing to accommodate to all control switches and other accessories, cable connections with suitable size of lugs/thimble etc and locking arrangement with two locks godown type welded inside of the shutter with duplicate keys, spray painting with two coats of light gray paint over a coat of red oxide primer and mounted on two No bricks pillars including excavation and earth work complete PCC (1:2:4), brick work (1:4), plastering (1:6) and painting complete all as specified and directed by Engr-in-Charge and comprising of following accessories :- INCOMING:- (a) MCCB 4 Pole 200 Amp 415 volts 36 KA =01No. (b) Aluminium bus bar 320 Amps with insulator-04 Nos. (c) 3 phase Multifunction meter of suitable range/size.-01 Nos. (d) CT ratio of suitable size-01 set (set of three). (e) Indication lamp – one set(set of three). OUTGOING (i) MCCB 3 Pole 100 Amps 415 Volts 25 KA - 04 Nos

Excavation, in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr in depth for laying cable in any type of soil and getting out complete all as specified & directed by Engineer-in-Charge.

Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25 cm thick complete all as specified and directed by Engr-in-Charge.

Removal of surplus excavated material to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed by Engineer-in-Charge.

M&L Sand cushioning to under ground cable with dry sand locally available 8cm thick before laying the cable and 15 cm above the cable, stretching and testing of cable complete all as specified & directed by Engineer-in-Charge. Note :- After punning down 18 cm shall be measured and paid.

Taking out old unserviceable/serviceable bricks from excavated trenches complete all as specified and directed by Engr-in-Charge. Note:- Serviceable bricks kept in safe custody for reuse at site.

Laying only serviceable bricks laid flat with length equal to width of brick as retrieved from Srl item No.22 complete all as specified and directed by Engr-in-Charge.

Supply and laying sub class ‘B’ bricks well burnt for cable protections over cable perpendicular to length of cable complete all as specified and directed by Engr-in-Charge

Supplying and laying in replacement of reinforced precast concrete cable cover class LV, Type 1, flat, size 250mmx l50mm x 40mm for mechanical protection of cable with width equal to lenght of brick. complete all as specified & directed by Engineer-in-Charge.

M&L for cable jointing kit for 11 KV (Earthed) grade for outdoor termination end joint kit, heat shrinkable type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm including taking down complete all as specified and directed by Engr-in-Charge.

M&L for cable jointing kit for 11 KV (Earthed) grade for indoor termination end joint kit heat shrinkable type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm including taking down complete all as specified and directed by Engr-in-charge.

M&L for cable jointing kit for 11 KV (Earthed) grade for straight through, heat shrinkable type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm including taking down complete all as specified and directed by Engr-in-Charge.

M&L for cable jointing kit 1.1 KV Heat Shrinkable XLPE Straight Joints for 25 to 50 Sqmm size including taking down complete all as specified and directed by Engr-in-Charge.

All as per Srl item No. 29 above but 70 to 150 sqmm size.

All as per Srl item No. 29 here-in-before but 185 to 300 sqmm size.

Arranging fault locating machine to locate the fault in underground electric power cable of any length & any type of 11 KV/1.1 KV grade HT/ LT cables & pin point the fault, it also include testing of the cable after locating fault and cutting the cable at Fault to fix the joint including excavation and earth wotrk in any type of soil complete all as specified and directed by Engr-in-Charge. Note : Cable joint shall be measured and paid separately under respective of Sch 'A' (i) If fault is not rectifed within 24 hours after receivng message, the contractor shall be charged penalty for Rs 500/- per Hours & the same has been deducred from his account during RAR.

S&F moulded case circuit breaker four pole 630 Amps 50 KA capacity 415V 50Hz with adjustable thermal and magnetic relay incl replacement of lugs & disconnecting and taking out the old unservicable MCCB from panel/DBs/ etc complete all as specified and directed by Engr-in-Charge.

All as per item No 33 above but 400 Amps 4 pole 36 KA Capacity 415V 50 Hz.

All as per item No 33 above but 320 Amps 4 pole 50 KA Capacity 415V 50 Hz.

All as per item No 33 above but 250 Amps 4 pole 36 KA Capacity 415V 50 Hz.

All as per item No 33 here-in-before but 250 Amps 3 pole 36 KA Capacity 415V 50 Hz.

All as per item No 33 here-in-before but 200 Amps 4 pole 36 KA Capacity 415V 50 Hz.

All as per item No 33 here-in-before but 200 Amps 3 pole 36 KA Capacity 415V 50 Hz.

All as per item No 33 here-in-before but 160 Amps 3 pole 36 KA Capacity 415V 50 Hz.

All as per item No 33 here-in-before but 100 Amps 3 pole 16 KA Capacity 415V 50 Hz.

S&F in replacement of old unserviceabel digital voltmeter of range 0-500 volts suitable for LT Panel complete all as specified and directed by Engineer-In-Charge.

S&F in replacement of old unserviceabel digital Ampere meter of range 0-630 Amps suitable forLT Panel complete all as specified and directed by Engineer-In-Charge.

S&F in replacement of old unserviceable indication lamp (R,Y,B) for LT Panel complete all as specified and directed by Engineer-In-Charge.

M&L for painting of steel tubuler pole after Cleaning and scraping with wire brush complete with two coat of aluminium paint over a coat of red oxide primer and making the pole number and applying one coat of cement base paint on PCC coping complete all as specified and directed by Engr-in-Charge.

M&L for Painting of LT Panel of any sizes after cleaning and scraping old paint with wire brush and applying two coat of synthetic enamel paint by using spary gun machine complete all as specified and directed by Engr-in-Charge.

S&F LED Street light fitting 45 Watt Highly efficient made of pressure die cast aluminium housing with lens & toughened glass in replacement of old unservicable conventional security light fitting including fixing material ie MS clamp, Nut and bolt,anchor fastner washer etc. complete all as specified and directed by Engr-in-Charge.

S&F LED Street light fitting 60 Watt Highly efficient made of pressure die cast aluminium housing with lens & toughened glass in replacement of old unservicable conventional security light fitting including fixing material ie MS clamp, Nut and bolt,anchor fastner washer etc complete all as specified and directed by Engr-in-Charge.

S&F in replacement of Building security light 30 watt to be fitted at the pheripheral surfaces of the building including fixing with Ms clamp,nut,bolts washer, fastner etc complete all as specified and directed by Engr-in-Charge.

S&F in replacement of Cable, single core 1.5 Sqmm, FRLS type (for phase and neutral) PVC insulated unsheathed multi stranded copper conductor cables drawn in new PVC Conduit of size 25 mm bore complete all as specified and directed by Engr-in-Charge. Note : Two runs (for phase and neutral) of 1.5 Sq mm single core copper conductor shall be measured as one unit length.

S&F in replacement thermoplastic cable junction box with metric knock out for cable entry of size 200x160x98mm with 4 Nos of 200A aluminium busbar mounted on insulators, terminal and provision of din rail for fixing of MCB 10A capacity including fixing with clamp 30x5mm iron flate, nuts, bolts and washer complete including providing of steel conduit of dia 32mm bore of length 1.60 mtr including earth work for taking out of cable, complete all as specified and directed by Engr-in-Charge.

S&F in replacement GI braket for fixing of bldg security light fitting with GI pipe 32/40 mm dia atleast 1.5 mtr long to be fixed in wall while constructing the wall and it has to be bend in 45 degree angle to install the bldg security light fitting including necessary cutting, welding and MS fastner, clamp with strip 38mm wide upto 6mm thick (Min) to the light and painting the bracket by good quality paint complete all as specified and directed by Engr-in-Charge.

S&F LED post top lantern 40 watt with die cast aluminium spigot, spun aluminium powder coated top cover, aluminium PDC heat sink,opal PC diffuser and clear acrylic.IP 65 with necessary accessories in replacement of old unserviceable gate light fittings any type complete all as specified and directed by Engr-in-Charge.

Note:- The contract sum shall be after deducting the amount of Credit shown in Credit Schedule of this Tender.

M/s Adhikari construction co.

Chaudhary Constructions

NEERU ELECTRICALS

KISHORE ENTERPRISES

Shiv Enterprises

verma enterprises

Haryana EngineerService

ramveer Singh

Surjit and Sons