REPAIR TO JOINERY SUCH AS WOODEN/ STEEL, ALUMINIUM DOOR AND WINDOWS, CUPBOARDS, CURTAIN RODS, TILING, PLUMBING, SANITARY FITTINGS ETC IN OFFRS MD ACCN UNDER GE(MCTE) MHOW

Amount

Taking down chowkats or frame of any description exc 1.5 Sqm each and n.exc 4Sqm (without taking off shutters from the frames) & remove off the premises complete all as specified and directed.

Taking down chowkats or frame of any description n.exc. 1.5 Sqm each (without taking off shutters from the frames) & remove off the premises complete all as specified and directed.

Taking down Shutters of any description n exc 1 sqm each of any description complete all as specified and directed.

Taking down Shutters of any description exc. 1 sqm but n. exc 2 sqm each of any description complete all as specified and directed.

S&F Pressed steel door frame for single door, size 105 x 60mm with one rebates incl necessary fixing lugs, hinges, lock strike plate, holdfast (size 25mm x 3 mm) of length 30 cm) etc. making good holes and distrub area in cement mortar (1:3) complete all as specified and as directed.

S&F Pressed steel door frame for single door, size 165 x 60mm with one rebates incl necessary fixing lugs, hinges, lock strike plate, holdfasts (size 25mm x 3 mm) of length 30 cm) etc, making good holes and distrub area in cement mortar (1:3) complete all as specified and as directed.

M & L for PCC 1:2:4 type B0 (12.5mm graded) aggregate for filling in pressed steel door framed.

S & F 35mm thick second class hardwood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, moulded on solid (for each side): supplied and fitted to chowkat

S&F 35mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed.

S & F 35mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Part-I section 8 and clause 8.24 (a)

S & F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Part-I section 8 and clause 8.24 (a)

S&F Plain, solid, straight 2nd class hard wood frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F Factory made single extruded Actual WPC (Wood Polymer Composite) with European technology Floresta (Pletina) Both Side Laminated solid plain flush door shutter of 30mm Thickness, comprising of virgin polymer, calcium carbonate and natural fiber (wood powder/ Saw dust) and nontoxic additives having minimum density 700kg/cum and screw withdrawal strength of 1474 N face) and 774 N (edge), Minimum compressive strength 24.6 N/mm2, Modulus of elasticity 1861 N/mm2 with property of being termite/ borer proof, water/moisture proof and fire retardant. Make : Floresta or equivalent.

S&F Factory made of 100% solid (Wood Polymer Composite) WPC door frame single rebate of 125mm x 63mm FLORESTA made form wood plastic composite (single Extruded process) meterial with comprising of virgin PVC resin of k valu 57-60 (suspension Grade) calcium carbonate and Natural fiber (wood powder/naturl wood/white husk) and non toxic additives fabricated with meter joint after applying PVC solvent cement & screwed with full body treated stre headed screws having density 1075 kg/cbm & manufacture by TVC Engineers Pvt. LTD, An ISO 900-14001 certified company. door frame shood be water proof termite/ borer proof, water/moisture proof and fire retardant. good screw holding capcity of Min 900N/mm door frame fixed to the wall using 8/120mm fiser screws. Make : Floresta or equivalent.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS sqare tube, complete all as specified and directed.

S&F factory made solid PVC moulded door shutters 28 to 30mm thick stiles), with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on back face, with wood free EPS, Supplying and fixing in frame at site as per specifiecation & drawing shown in section 8 of SSR Part-II complete all as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm prelam PVC sheet used instead of plain colour PVC sheet and edges will be painted to match with reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing with prelam sheet all as on drawing on Sl page No.178 of SSR Part-II

S&F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded both side Prelam PVC sheet used instead of plain colour PVC sheet with solvent cement for stiles and top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour Prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable Prelam PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

S&F 150mm size aluminium, anodised barrel tower bolt of extruded section.

S&F 125mm size aluminium, anodised barrel tower bolt of extruded section.

S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.

S&F120mm size, butt hinges, heady weight, cold rolled mild steel.

S&F100mm size, butt hinges, medium weight, cold rolled mild steel.

S&F 150mm size extruded aluminium alloy handles, fabricated type.

S&F 125mm size extruded aluminium alloy handles, fabricated type.

M&L for Preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specifed and directed.

S&F in repairs 18mm thick factory made PVC sheet one side pre-laminated sheet ktichen cabinet shutter. The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for marking edge lipping bending for 0.5mm thick PVC sheet lipping at all four edges using bonding tape etc complete all as per specified and directed by Engr-in-Charge manufactures specification.

S & F in repairs factory made PVC shelf/ partition of required size consisting of panel of 18 mm thick required size consisting of panel of 18 mm thick celuka PVC ply and for supporting the hold of shelf /partition and shall provided 3 edges in size 18mm x 18 mm as per required lenght the front side of the edge visible in the front of the shelf/partition to be edge lipped by 18mm widht x 1mm thick PVC sheet of density 600 kg/cum manufactured by ISO 9001-2015 Certified Company, using solvent cement etc.

S&F stainless steel shelf closing hinges 75mm size for PVC door shutters complete all as specified and directed.

S&F 50 x 15mm size magnet door catcher for closing for PVC door shutter complete all as specifid and directed.

S& F 100 mm size MS mat/glossy finish handle complete all as specfied and directed.

S&F modular type stainless steel Cutlery basket size 20 x 19 x 4 inches 9 dia of wire not less than 3.00mm ) of any shape with side sliding roller clip and sliding rails on both side fixed with steel screws incl all fixing arrangement complete all as specified and directed.

As as per item No above but cup & saucer basket size 20 x 17 x 4 incles complete all as specifed and directed.

As as per item No above but plain basket size 20 x 19 x 6 incles complete all as specifed and directed.

As as per item No above but grain basket size 20 x 17x 6 incles complete all as specifed and directed.

As as per item No above but thali bsket size 20 x 19 x 8 incles complete all as specifed and directed.

As as per item No above but plain basket size 20 x 17 x 8 incles complete all as specifed and directed.

S&F in repair mild steel helical door spring 300mm long stove enamelled black incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed.

S&F in repair curtain rod of stain less steel 25mm dia all as specified and directed.

S& F Stain less steel brackets for suitable 25mm dia curtain rods all as specified and directed .

S&F Brass handles 100mm size, cast type, polished bright as approved by Engr in Charge complete all as specified and directed

S&F 40mm dia, brass, knobs for cupboard fixed with nut, screw and washer of mild steel, bright finised complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flap (when open) 30mm complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame incl punching or drilling out old glazing pins/ spring clips and providing and fixing new ones.

M&L for 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane.

M&L for 3mm thick sheet figured glass, pin headed type and glazing with oil putty in square n exc 0.5 Sqm in each pane.

S&F in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples

M & L in fixed in repairs 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work in cupboard complete all as specified and directed.

Taking down Shutters of any description exc 2 sqm each and refixing in the same opening after resecuring or easing and adjusting shutters of any description. complete all as specified and directed.

Taking down shutter exc. 1Sqm and n.exc 2 Sqm each and refixing in the same opening after resecuring or easing and adjusting shutters of any description. complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise described complete all as specified and directed

S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framed work and similar works complete all as specified and directed.

M & L for Cutting holes in brick walls built in cement mortor for inserting holdfasts and making good dismantled portion in cement mortor 1:3 or cement concrete 1:2:4 Type B-1, depth of embedded portion of holdfasts exc. Half brick but not exc. One brick from the face of the jamb intl the wall.

M&L for preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamelled paint over a coat of red oxide primer complete all as specified and directed.

M&L for powder coated anodised aluminium section of Jindal/ Hind/ Hindalco for frame and shutters for doors, including necessary joining cleats, glazing clips, rubber neoprene packing, handle, hinges, anodised aluminium snap beading, screws, etc complete all as specified and directed.

S&F powder coating anodised aluminium ventilator, half portion of the ventilator covered with 5.5mm thick frosted glasses and half portion fittted with frosted louvers and outer side fitted with mosquito proof galvanised wiremess including removing old steel ventilators incl finishes the demolition surfaces with rendering 10-15 mm thick CM 1:4 of fair finshes including filling the holdfast holes with PCC 1:2:4 (12.5 mm graded aggregate) including 02 coat of cement based paints with primer incl all fittings, accessories etc all as specifed and directed by Engr-in-Charge.

S & F of Powder coated aluminum three track sliding shutters two Glazed shutters and one guazed shutters(with wire mesh), each shutter width one half of the length of window with the following specifications and making good the adjacent surfaces. (i) Three way track for sliding shutters of cross section 91.80mm x 31.75mm x 1.30mm thick. (ii) Sliding shutter frame of cross section 40 x 18 x 1.30mm. (iii) Aluminium glazing strip of size 18.2 x 16.66mm. (iv) 5 to 6 mm thick float glass superior quality make Modi float for two shutters. (v) IDPE rubber gasket for fixing glass. (vi) Locking cleat per shutter -01 No. (vii) Two nos sliding rollers per shutter. (viii) Rubber shock absorber 03 No per shutter. (ix) Aluminium wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm for one shutter. (x) Fixing screws for frame with wall - 06 No per window.

S&F standard aluminium anodised grill made of 5mm thick bar, size of mesh 100 x 100mm using U channel 25mm x 12mm complete all as specified and directed.

S&F double action floor spring hydrualically regulated made up of minimum 12.5mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed complete all as specified and diredctd.

S&F, in repair double legged door stopper of aluminium alloy with rubber all as specified and directed.

S&F, in repair aluminium anodized hasp & staple, safety type, with mild steel hinge pin including bolt to hinge plate, fixed with screws, of 100mm size all as specified and directed.

S&F, in repair door closer hydraulically regulated designation No-2 universal type of aluminium body fixed to door frames with screws or by welding complete all as specified and directed.

S&F in repair of steel spring for rolling shutters and removing of worm out components such as hood cover, laths, ball bearings, helical wire spring lock, shaft pipe, straightening of existing laths at required places including greasing and refixing in the same location all as directed by eng-in-charge.

S&F Gate and shutter, hooks and eyes 150mm aluminium plate type.

M&L for providing PVC WALL PANELLING of 5mm thick consisting of panel of desired size stuck on inner frame work of 50mm wide strips of 5mm thick prelaminated PVC sheet. The panel & strips shall be density of 600 kg/CBM manufactured by ISO-9001-2015 certified company. The strips should have in their centre a gove of 6mm widht and 1mm depth for sinking the head screws used to fix the strip to the wall vertically at an equal interval of 10 inch between two PVC strips. The PVC strips shall be fixed to the wall using 65 mm long MS screws through the groove in the strip by using PVC fasteners the distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall optionally a strips of 5mm thick PVC sheets of width 75mm feathered at the edges shall be stuck at the places where two panels are joined using solvent cement.

M&L, for welding in repairs not exc 2.5 cm each with thickness of metal to be welded not exc 6mm, complete all as specified and directed.

M&L for pre polished coloured cement concrete chequred tile of approved quality size 300 x 300 x 25mm thick on floors over and including 20mm thick screed bed CM 1:6 set and jointed in neat cement slurry and pointed with colour to match th tiles complete all as specified and directed.

M&L for machine pressed precast concrete interlocing paver block any shape and size conforming to IS-15658-2006 of 60mm thickness, M-40 grade laid dry in floor/path with and including 50mm thick (Compacted thickness) crushed stone sand cushioning complete all as specified.

Taking down old curtain rods/ drapery rods of any description and S&F drapery rod 32mm dia, high Strength aluminium rod with powder coated paint of thickness 40/60 microne of wood finish with minimum 8 rings in each metre length of rod of ABS Plastic in matching colour & installations brackets of galvanised steel, powder coated paint in matching colour with all accessories complete all as specified and directed.

Virified Ceramic tiles 10mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6

-ditto- but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6

-ditto- but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/shade) of 300 x 450 x 7mm thick in vertical surfaces, as in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for 300 x 300 x 10mm thick heavy duty ceramic floor tile laid in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed.

S & Fixed in repair Vitreous china, wash down water closet pan (pedestal pattern), white, including plastic water closet seat cover, closed pattern with flat bottom, connection to drain (or outgoing pipe) and to flushing pipe, antisiphonage pipe etc, complete.(Parryware, Hindware, Cera, Hindustan)

S&F in repairs low level Flushing cistern 10 ltr capacity, PVC valveless syphonic action type, white with inlet, ball valve, float valve and handle, flush pipe, incl brackets and flushing pipe fixed in repairs complete all as specified and directed.(Parryware, Hindware, Cera, Hindustan)

S & F vitreous china squatting pan 'Orissa' pattern, size 580 x 440mm white in repairs with integral foot rests (Excluding flushing cistern and flush pipe)

S&F in repairs vitreous china,white, wash hand basin, flat back size 550 x 400mm including MS brackets including cutting for and pinning in, including waste pipe complete all as specified and directed. (Parryware, Hindware, Cera, Hindustan)

S & F under counter ivory wash basin, vitreous china size 560 x 410 x 180mm including cutting for and pinning in ends of brackets or erecting stand but incl wastecoupling and brackets, fixing of supply and waste pipe, Rag Bolt Assy 3/8" complete all as specified and directed.

S&F in repair pillar cock swan neck (T/M).

S&F in repair 15mm size PVC connections internally threaded with PVC washer, PTMT nuts of length 450mm complete all as specified and directed.

S&F Grating 100 mm dia of CP with or without hole complete all as specified and directed.

S&F in repair 15mm dia bib tap cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as directed. Make : Jaquar Cat Part No CON-CHR-107KN & techno communally equivalent tlid /Marc, Plumber, cera

S&F in repair 70mm size Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specifed and directed. Make : Jaquar Cat Part No EOS-CHR-491 & techno communally equivalent tlid /Marc, Plumber, cera

S&F in repair 15mm dia brass chromium plated long neck pillar tap, fancy type with or without lettered 'Hot' or 'Cold', with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe complete all as directed. Make : Jaquar Cat Part No CON-CHR-021KN & techno communally equivalent tlid /Marc, Plumber, cera

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as directed. Plumber or Prayag

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with all plugs, washers, fittings and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specifed and directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for re fixing complete all as specifed and directed

S&F, laying and testing for 15 mm bore GI tubing medium grade galvanised steel tubing including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specifed and directed.

M&L for cutting, chases, pinning in block masonry wall for concealed water tubing and making good to facing and pointing in CM 1:3, cutting n. exc. 10 cm girth all as specified and directed.

Dismantling PVC water tanks 1000 litres capacity.

Dismantling PVC water tanks 500 litres capacity.

S&F rotational moulded polyethylene water storage tanks of capacity 1000 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I.

S&F rotational moulded polyethylene water storage tanks of capacity 500 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I.

S & F in repairs Stop/angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions. Make : Jaquar Cat Part No CON-CHR-053KN & techno communally equivalent tlid/ Marc, Plumber, Cera

S & F in repairs two way Bib cock/angle cock 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions. Make : Jaquar Cat Part No CON-CHR-041KN & techno communally equivalent tlid/ Marc, Plumber, Cera

S & F in repairs Toielt Paper Holder Stainless Steel fixed to wall al as specifed and directed by Engr-in-Charge. Make : Jaquar, Marc, Plumber

S & F in reparis Stainless Steel Wall Mount Case with Soap Holder & Bruch Holder fixed to wall all as specified and directed by Engr-in-Charge. Make : Jaquar, Marc, Plumbe

S&F in repairs Health Faucet ABS with Rubbit Cleaning System, 1.25 m Long Flexible Tube & ABS Wall Hook. Make : Jaquar Cat Part No ALE-CHR-583 & techno communally equivalent tlid/ Marc, Plumber, cera

S&F in repair chromium plated brass wall mixer 3-in-1 fancy type with provison for both hand shower and overhead shower complete with wall flange (without hand &over head Shower screwd down for15 mm GI bore pipe complete all as specifed and directed. Make : Jaquar Cat Part No CON-CHR-273KNUPR & techno communally equivalent tlid/ Marc, Plumber, Cera

S&F in repair chromium plated brass Central hole basinmixer without popup waste system complete screwd down for15mm GI bore pipe complete all as specifed and directed. Make : Jaquar Cat Part No CON-CHR-167KNB & techno communally equivalent tlid/ Marc, Plumber, Cera

S&F in repair 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified. Make : Jaquar Cat Part No ACN-CHR-1111SM & techno communally equivalent tlid/ Marc, Plumber, Cera

S & F in repairs 32/40mm PVC downpipe for kitchen sink fittled to Kitchen Sink incl all necessary brackets etc all as specifed and directed by Engr-in-Charge.

Demolition of stone slabs of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc. complete removal of debris outside MD land.

M & L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15mm thick screed bed in CM 1:6

-ditto- but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L 16 to 18mm thick Granite (of any type) work (table rubbed and polished and exposed visible edge moulding/rounding ) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

S & F in repairs Corner Glass Shelf of 5mm to 6mm Size 320 x 320mm with Silver chromium finished border Oval Range premium quality all as specifed and directed by Engr-in-Charge. Plumber or Prayag

S&F in repairs Brass Butter Fly Jet Spray with 1.2 meter Long Flexible Tube of premium quality fittled to Vitreous china, wash down water closet pan (pedestal pattern) all as specfied and directed. Make : Jaquar, Marc, Plumber

Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys, scrubbing down with water etc, complete all as specified and directed.

M&L for Rendering 15 mm thick on fair faces of concrete/ brick interior surfaces in cement mortar 1:6 as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed.

M&L for preparation of new surfaces pf plastered of walls and applying Two coat of distemper oil emulsion incl priming the surface and incl one coat of wall putty all as directed by Engr-in-Charge.

M&L for Rendering 10mm thick on fair faces of concrete surface of ceiling,chajja in CM 1:3, surface finished even and surface without using extra cement complete all as specified and as directed.

M&L for Preparation of Newly plastered surface and applying three coats of white wash on Ceiling complete all as specified and as directed.

M&L for Rendering 15mm thick on fair faces of concrete/brick exterior surfaces in cement mortar 1:4 mixed with water proofing compound as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed.

M&L for preparing of newly plastered surface on exterior wall and applying two coats of cement paint over one coat of priming the surfaces all as specified and directed by Engr-in-Carge.

Taking down damaged any type of bathroom cabinet and S&F New PVC bathroom cabinet best quality. Make : Plumber or Prayag

S&F in repair Ball valves 15mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed.

S&F in repair PVC (SWR) pipe 110mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive fixed to wall with iron cleants etc complete all as specified and directed.

Supply and fix in repairs PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fix to wall all as spcified.

S&F in repairs PVC floor trap, with grating 75mm including jointing to wast pipe fixed in cement concrete type B1 (1:2:4), in repairs and including waterleak proor treatment complete all as spcified

S&F PVC (SWR) Bends (any radius), diminishing pieces or tapers, bore of pipe 75mm, complete all as spcified.

S&F in repairs PVC (SWR) Bends (any radius), diminishing pieces or tapers, bore of pipe 110mm, complete all as spcified.

S&F in repairs PVC (SWR) Branch pieces, double (double Y) equal or unequal of pipe 75mm bore complete all as spcified.

S&F PVC in repairs (SWR) Branch pieces, double (double Y) equal or unequal of pipe 110mm bore complete all as spcified.

Demolition of cement concrete unreinforced in Ground floor & paving n.exc 15cm thickness and removal of debris from site all as specified and directed

M&L for PCC 75mm thick type B2 (1:2:4) using 40 mm graded stone aggregate in plinth protection, joints should be filled with bitumen primer etc, complete all as specified and as directed.

M&L for PCC 75mm thick 1:4:8 type B2 using 40mm graded stone aggregate as insub base finishing the surface rough to receive tilies.

M&L for Cement concreat type B-0 (1:2:4) using 12.5mm graded stone aggregate 25mm thickfinished surface rough to receive tiliing all as specified and directed.

Demolition of brick work built in cement mortar in any position and removing rubbish off the premises within 50m all as directed by the Engineer-in-charge.

M&L for plan, modular size kiln well burnt sub-class 'B' bricks, exc 6m in mean radius, built in CM (1:4), complete all as specified and directed.

M&L for brick work with modular size kiln well burnt sub-class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4

M&L for washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of oil bound distemper including necessary putty (any tint) on walls complete all as specified and directed by Engr-in-Charge.

sabir and brothers

Sudarshan Associates