Renovation of Auditorium at Chaulkhoa and Construction of Guest House ,Dibrugarh

Amount

Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level. (a) In ordinary soil

Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (b) With hill sand obtained by truck carriage loading and unloading, and carriage to the site of work.

Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified.(b) Other than Guwahati city

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary and curing complete (shuttering where necessary shall be measured and paid seperately). (a) In proportion 1:3:6 (1 cement: 3 coarse sand : 6 coarse agg. By volume (using mixture machine)

Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed.

Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (A) In substructure up to plinth level In Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. (N) Without using admixture, plasticiser (b) M20 grade concrete or Prop. 1:1.5:3

Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (B) In super- structure from plinth level upto 1st floor level: ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. N)Without using admixture,Plasticiser b) M20 grade concrete or Prop. 1:1.5:3

Providing and laying plain / rainforced cement conrete works cement with coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding the cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid seperately) (B) In super- structure from 1st floor level upto 2nd floor level: Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing.

Providing and laying plain / rainforced cement conrete works cement with coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding the cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid seperately) (B) In super- structure from 2nd floor level upto 3rd floor level: Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing.

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc.(b) Using 25mm thick plank

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Sides of tie beams, grade beams etc. at or below ground level.(b) Using 25mm thick plank

Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face Columns at grd floor

Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face Columns at 1st floor

Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face Columns at 2nd floor

Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M. At Grd lvl.Lintel

Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M. At 1st floor lvl.

Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M. At 2nd floor lvl.

Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like upto first floor lvl. (a) Floors etc. upto 200mm in thickness.

Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like first floor to second floor lvl. (a) Floors etc. upto 200mm in thickness.

Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like second floor to third floor lvl. (a) Floors etc. upto 200mm in thickness.

Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete.(a) Brick on flat soling.

230mm thick brick wall in cement morter with 1st class brick including racking out joints and curing complete as directed in structure (I) In Sub-structure upto plinth level including dewatering if necessary (b). In proportion 1:4.

1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) (A) 112mm thick brick wall (a) In cement mortar in proportion 1:4. (1 cement:4 sand)

1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above first floor to second floor lvl.(protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) (A) 112mm thick brick wall (a) In cement mortar in proportion 1:4. (1 cement:4 sand)

1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above second floor to third floor lvl. (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) (A) 112mm thick brick wall (c) In cement mortar in proportion 1:6 (1 cement :6 sand)

Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) b) Executive range Somany/ Orient / Varmora Make ii) Of size 800mmx800mm and above

Providing polished vitrified wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/white cement slurry mixed with approved pigment to match shade of tilesc complete at all levels as specified and directed. (coloured pigment should be in conformity with colour of tiles and as approved and directed by the department). iv) Of size300mmx900mm and

18 mm thick Marble stone slab flooring of sizes 1200x1200 including treads and risers of steps, skirting, laid over 20 mm thick base of cement plaster 1:6 (1 cement : 6 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with marble slab of specified quality and shade at all levels. (Analysis) (IV) Rajnagar Slab

Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed. (A) CERAMIC (iii)Executive range-2 (Sizes 600 mm x 600mm and above) (Somany made- VC Shield (Group- 25) (605x605) mm (a) Deluxe -VC

10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed. (b) In cement mortar 1:4

15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. (A) On rough side (b) In cement mortar 1:4

Extra over item no 6.2.2 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed. Ground floor

Extra over item no 6.2.2 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed. First floor

Extra over item no 6.2.1 to 6.2.3 for exterior plastering over wall up to a height of 1st floor level above ground level including curing complete as directed. (a) On Single coat plaster Ground floor

Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) pre-coated G.I. angle size 24mmx24mmx80mm thick fixed to the brick wall/ partition at the perimeter of ceiling with nylon sleeves and screws, at 610mm c/c. Then suspending main 'T' section (bottom pre-coated) size 24mmx38mmx0.70mm and 3600mm long from the soffit in one direction with the help of metal Rawl Plug. Soffit cleat and G.I. Rod 4mm diameter with galvanised level clip 1220mm c/c G.I. cross ( C ) BPB Grid ceiling system with plain Gypboard Tiles 8.0 mm thick.

Providing Pre Painted Galvanized Iron Sheet Roofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement (iii) 0.50 mm thick

Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges / Valley / Gutter /Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete complete. TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement (iii) 0.50 mm thick

Providing & fixing of factory made 100% "DOREC" solid wood composit (WPC) door frames made from wood plastic composit ( single extruded process) material with density 0.78/kg/cum and manufactured by a ISO-9001-2000 Certified company. Water absorbtion not more than 0.01% cum WPC DOOR FRAME SINGLE REBATE 90 MM X 45 MM (DOREC) For doors at all levels

Providing, fitting and fixing factory made Santro Flush door shutters having core & cross bands fabricated from seasoned 1st class timber, 25mm core battens, 2.5mm to 3.5mm uniformly thick cross bands, styles & rails made from hardwood timber of width not less than 50mm, fixed to the door frames (chowkath) with necessary hinges, screws, bolts etc. as specified and directed at all levels (Door fixtures and fittings to be measured and paid seperately. ((c) 40 mm thick

Providing, fitting and fixing coloured anodised aluminium windows and ventilators of standard sections of approved brand without horizontal glazing bars joints mitred and welded (manufactured to relevant IS specifications) fitted with 6mm x 3.15mm lugs 100mm long embedded in CC blocks 150mm x 100mm x 100mm in 1:3:6 mix including providing and fixing handles, frictions stays, joining cleat, bolting device, locking arrangement, spring catch as required complete as specified and directed for all levels.(Cement concrete to be measured and paid separately). (a)Side hung and Top hung windows and ventilators (i) 6mm clear glass

Providing, fitting and fixing coloured anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars,joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels. (a)2 Track sliding window (i)6mm clear glass

Providing, fitting and fixing coloured anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars,joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels. (b)3 Track sliding window (i)6mm clear glass

Providing, fitting and fixing aluminium curtain wall on the exterior face of the building fitting to concrete members by drill hole fixing by brass screw fabricated with anodised aluminium section of approved brand (HINDALCO/NALCO/BALCO/JINDAL) other equivalent primary producers) of size 101mm x 44.5mm by providing aluminium joining angles including providing 6 mm thick coloured refelctory glass fitted with aluminum at all levels.

(n) Distempering two coats with oil bound distemper of approved brand and manufacture and of required shade on new wall surface to give an even shade, over and including a priming coat with alkali resistant primer of approved brand and manufacture after throughly brooming the surface free from mortar dropings and other foreign matter and also including preparing the surface even and sand papered smooth.(i).Priming coat with alkali resistant primer

(n) Distempering two coats with oil bound distemper of approved brand and manufacture and of required shade on new wall surface to give an even shade, over and including a priming coat with alkali resistant primer of approved brand and manufacture after throughly brooming the surface free from mortar dropings and other foreign matter and also including preparing the surface even and sand papered smooth. (ii). Top coat

p) Extra over item no 13.2.2(n) above for every subsequent coat of distempering with oil bound distemper of approved brand and manufacture.

q) Extra over item no (n) above for distempering with oil bound distemper of approved brand and manufacture on celing and sloping roof.

Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm) (ii)Thickness = 1.0mm thick

Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter , sand papering and knotting. (b) With ready mixed paint , wood primer (white).

Applying priming coat over new wood based surfaces up to 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt and other foreign matter , sand papering and knotting. (b). With ready mixed paint , wood primer (white).

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. ((i)Surfaces over 100mm in width or girth. (b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

Finishing old / new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of Berger paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats)

Supplying, fitting, fixing brass fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary c.p. brass screws etc. complete.( bright natural matt & satin finished ). (b) Tower bolts (i) 300mm x 10mm

Supplying, fitting, fixing brass fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary c.p. brass screws etc. complete.( bright natural matt & satin finished ). (j) Door latches (i) 300mm x 16mm x 5mm

Supplying, fitting, fixing brass fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary c.p. brass screws etc. complete.( bright natural matt & satin finished ). (o) Mortice cylindrical type(Godrej make)-polished Brass

Supplying, fitting, fixing brass fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary c.p. brass screws etc. complete.( bright natural matt & satin finished ) .(v) Door stopper with rubber stopper

Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) (a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL (i) TMT Corrosion resistant steel (CRS) reiforcement bar

Providing fitting, hoisting and fixing of roof trusses including purlins fabricated using MS circular hollow section conforming to relevant I.S. code, as per approved design and drawings including providing M.S. cleats, base plates, bolts and nuts and one coat of red oxide Zinc Chromate primer and two coats of approved enamel paints complete including fitting necessary cleats etc. for fixing ceiling joists as per design and drawing as directed. (a) TATA make Circular Hollow section- CHS of Grade YST-310 conforming to I.S. Specification : 1161-1998

Providing plinth protection with bricks laid on edge and grouted with cement mortar 1:4 and finishing with cement pointing in prop. 1:1 complete.

Providing drain with cement concrete (1:3:6) 10cm thick sides 10cm thick bed over brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. (i). 300mm wide and average 150mm deep with bed slope 1 in 150 with initial depth of 100mm.

Providing drain with brick work in cement mortar in proportion 1:5 with half brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. ii). 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm.

Demolishing rcc work including stacking of steel bars and sposal of unserviceable materials as directed for all levels.

Demolishing brickwork including stacking of serviceable material and disposal of unserviceable materials as directed for all levels.

Demolishing all types of corrugated/ trapezoidal sheet roofing including ridges, hips, valleys and gutters etc. and stacking the materials as directed by the dept. for all levels.

Dismantling and removing the existing Door and window frames (Chowkath) both wooden and steel of different sizes without damaging the walls and removing the frame and necessary repairs to the edges of the walls as directed for all levels (ii) Above of door/window area 3.00 sqm

Pre construction anti - termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surface area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete.a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

Supply, Installation, Fixing of CARBON DIOXIDE Fire Extinguisher confirming to IS: 2878 with ISI Mark.(4.5 LITERS) BRAND: FIRESTOP / FIREND / FIRESHIELD

Construction of Sub-grade and earthen shoulders with approved materials obtained from borrow pits, with all lifts & leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2 (including compensation of earth ). (Including cost of testing of materials at site and laboratory as directed by the deptt.) b) from Government land

Construction of Granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per Clause 401 of MoRTH specifications (with an initial lead of 5 km) (including cost of testing of materials at site and laboratory as directed by the deptt.) (b)Using Grading II material

Providing and laying of inter locking concrete block pavement (ICBP) with cement concrete paver blocks as per IS 15658-2006 of thickness 80mm and 28 days compressive strength not less than 30 N/m over a layer of bedding sand of compacted thickness 30mm, laid either in stretcher/ running/ herringbone pattern of bonds as directed by the engineer and in proper level and grade and compacted with appropriate equipment such as plat vibrator along with spreading of a thin layer of joint filling sand to fill up the gaps between blocks including construction of edge restraint wherever required complete as per drawings and Technical specification clause 1504 of MORD.

Providing fitting and fixing white vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers, CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing cistern to be paid seperately) A) Parryware make(a) White i)Universal closet S trap (Cat no. C0271) (Anglo Indian) (inclusive of seat cover)

Supplying fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately) Parryware make I)a)White i)Economy single flush (cat no. C8090/C8055)

Providing fitting and fixing viterous china flat back type lipped front urinal basin with standard flush pipe and CP brass spreader and brass unions, etc. complete including painting of fittings and brakets, cutting and making good the walls & floors wherever required. (A) Parryware make (a) White i)New magnum (Cat. No C0575)

Providing vitreous China wash basin with CI/MS brackets, ,C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required.(pillar cock, stop cock, waste coupling are to be paid seperately) 1.13.2 Basin (Without pedestal) A) Parryware make a) White i) Star basin 550 x 400 (Cat no. C0450)

Providing fitting and fixing mirror with plastic frame of size 500x400mm complete as directed and specified.

Providing, fitting and fixing chrome plated (CP) soap dish/tray complete as specified and directed.i) Jaguar make a) Continental (Cat no. ACN-1331N)

Providing, fitting and fixing chrome plated (CP) towel rail complete as specified and directed.b) Sona make iv) Towel rail Diplomat 750mm long (Cat no. TR-0605)

Providing fiting & fixing chrome plated waste coupling complete as directed and specified.b) Sona make i) Rupa 32mm (HT/FT) (Cat no. WS-0801)

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps, bend, single tee and all other necessary connectivities etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (i) 110mm dia.

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps, bend, single tee and all other necessary connectivities etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (iv) 75mm dia.

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps, bend, single tee and all other necessary connectivities etc.as necessary complete at all levels including below G.L as directed and specified. b) Concealed by chiselling or breaking brick wall/ C.C/ R.CC and making good to the damages.(ii) 110mm dia.

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps, bend, single tee and all other necessary connectivities etc.as necessary complete at all levels including below G.L as directed and specified. b) Concealed by chiselling or breaking brick wall/ C.C/ R.CC and making good to the damages.(iv) 75mm dia.

Supplying, fitting and fixing 87.5 degrees PVC bend of (Supmreme / Prince) or other ISI approaved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L as directed and specified.a) In exposed surfaces or in trenches. (i) 110mm dia.

Supplying, fitting and fixing 87.5 degrees PVC bend of (Supmreme / Prince) or other ISI approaved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L as directed and specified.a) In exposed surfaces or in trenches.(iv) 75mm dia.

Supplying, fitting and fixing 87.5 degrees PVC bend of (Supmreme / Prince) or other ISI approaved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L as directed and specified. b) Concealed by chiselling or breaking brick wall/ C.C/ R.CC and making good to the damages.(ii) 110mm dia.

Supplying, fitting and fixing 87.5 degrees PVC bend of (Supmreme / Prince) or other ISI approaved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L as directed and specified. b) Concealed by chiselling or breaking brick wall/ C.C/ R.CC and making good to the damages.(iv) 75mm dia.

Supplying, fitting and fixing 45 degrees PVC bend of (Supmreme / Prince) or other ISI approaved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L as directed and specified.a) In exposed surfaces or in trenches. (ii) 110mm dia.

Supplying, fitting and fixing 45 degrees PVC bend of (Supmreme / Prince) or other ISI approaved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L as directed and specified.a) In exposed surfaces or in trenches.(iv) 75mm dia.

Supplying, fitting and fixing PVC plain single tee of (Supmreme / Prince) or other ISI approaved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L as directed and specified.a) In exposed surfaces or in trenches. (ii) 110mm dia.

Supplying, fitting and fixing PVC plain single tee of (Supmreme / Prince) or other ISI approaved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (iv) 75mm dia.

Supplying, fitting and fixing PVC plain single tee of (Supmreme / Prince) or other ISI approaved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L as directed and specified. b) Concealed by chiselling or breaking brick wall/ C.C/ R.CC and making good to the damages. (ii) 110mm dia.

Supplying, fitting and fixing PVC plain single tee of (Supmreme / Prince) or other ISI approaved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L as directed and specified.b) Concealed by chiselling or breaking brick wall/ C.C/ R.CC and making good to the damages.(iv) 75mm dia.

Supplying, fitting and fixing PVC plain single tee with door of (Supmreme / Prince) or other ISI approaved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L as directed and specified.a) In exposed surfaces or in trenches. (ii) 110mm dia.

Supplying, fitting and fixing PVC plain single tee with door of (Supmreme / Prince) or other ISI approaved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (iv) 75mm dia.

Supplying, fitting and fixing PVC coupler of (Supmreme / Prince) or other ISI approaved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L as directed and specified.a) In exposed surfaces or in trenches.(i) 110mm dia.

Supplying, fitting and fixing PVC coupler of (Supmreme / Prince) or other ISI approaved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L as directed and specified.a) In exposed surfaces or in trenches.(ii) 75mm dia.

Supplying, fitting and fixing PVC reducer of (Supmreme / Prince) or other ISI approaved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L as directed and specified.a) In exposed surfaces or in trenches. (iv) 110mm x 75 mm dia.

Supplying, fitting and fixing PVC reducer of (Supmreme / Prince) or other ISI approaved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L as directed and specified.b) Concealed by chiselling or breaking brick wall/ C.C/ R.CC and making good to the damages.(iv) 110mm x 75 mm dia.

Supplying, fitting and fixing PVC reducer tee of (Supmreme / Prince) or other ISI approaved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L as directed and specified.a) In exposed surfaces or in trenches.(iii) 110mm x 75 mm dia.

Supplying fitting and fixing PVC socket plug of (Supmreme / Prince) or other ISI approaved including joining, fitting and fixing etc. as necessary complete at all levels (i) 110mm

Supplying fitting and fixing PVC socket plug of (Supmreme / Prince) or other ISI approaved including joining, fitting and fixing etc. as necessary complete at all levels (i) 75 mm

Providing fitting and fixing PVC cowel of ISI mark complete as directed and specified.(ii) 110mm

Providing fitting and fixing PVC cowel of ISI mark complete as directed and specified.(iv) 75 mm

Providing fitting and fixing C.I Grating to the floors complete as directed and specified. (a) 110mm

Providing fitting and fixing C.I Grating to the floors complete as directed and specified. (b) 75 mm

Proving fitting and fixing (300 x 230) mm C.I yard gully hinged Grating complete as directed and specified.

Providing fitting and fixing 450mm dia. 90mm thick C.I. Man hole cover and frame of 25 Kg. weight complete as directed and specified.

Providing and fixing Ajoy Flowgaurd chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing with one step CPVP solvent cement and testing of joints complete at all levels as directed and specified.(A )In internal wall - Exposed on wall c) 25 mm nominal outer dia of pipe

Providing and fixing Ajoy Flowgaurd chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing with one step CPVP solvent cement and testing of joints complete at all levels as directed and specified.(A )In internal wall - Exposed on wall d) 32 mm nominal outer dia of pipe

Providing and fixing Ajoy Flowgaurd chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing with one step CPVP solvent cement and testing of joints complete at all levels as directed and specified.(A )In internal wall - Exposed on wall e) 40mm nominal outer dia of pipe

Providing and fixing Ajoy Flowgaurd chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing with one step CPVP solvent cement and testing of joints complete at all levels as directed and specified.(ii) Concealed pipe with cutting chases and making good the walls.c) 25mm nominal outer dia of pipe

Constrution of filter bed in soak pit including earth work in excavation of soil and then filling up to the trench with brick bat/charcoal covered with earth over a layer of A.C. plan sheet above brick bat filling complete as directed. (sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table

Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately)(II)Jaquare make (a)Continental Clarion(i)Standard

Supplying fitting and fixing stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) Brass stop cock (heavy) of Sant make (iii) 25 mm dia

Supplying fitting and fixing C.P pillar cock of 15 mm dia of approaved brands as directed and specified.Agmeco (classic) (a) Flat

Supplying fitting and fixing gun metal country pit valve ( full way valve) ISI make as directed and specified.c) 25mm

Supplying fitting and fixing gun metal country pit valve ( full way valve) ISI make as directed and specified. d) 20mm

Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Ptton make over the stagging with manhole cover with locking and cleaning arrangment including providing pads of size as required for inlet and outlet pipes i) 2000 lt capacity (a) Polycon make

Supplying and placing ferrocement septic tanks of rectangular shape in to pit with manhole cover with cleaning arrangement over single brick flat soling and 75 mm 1:3:6 p.c.c. Baffle wall, inlet and outlet etc are provided at suitable points complete as directed.(vii) 50 user septic tank

Wiring for circuit wiring with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system.With 2 x 1.5 sq. mm. cable in 20 mm dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) including earth continuity in surface/ recessed PVC 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system . With 3 x 10 sq. mm. + earth continuity with2x 6 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Supplying and fixing of polished Brass Bracket of 18 S.W.G, 25 cm long cast back plate and brass lamp holder complete including connection as approved by the Deptt.)as required Without Lamp

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 double door surface mounting TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. 4 way TPN (4+12) double door

Supplying with fitting and fixing MCCB income and MCB outgoing sheet steel, phosphatised, powder painted double door IP-43 surface mounting vertical TPN MCB DB incorporated with bas-bar up to 250A, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. Richa, Bentec, Adhunic, V-Guard make) 4 way TPN (4+12) double door

Supplying with fitting and fixing SPN 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. B Series (Schneider MG, legrand, Hager make) 6 to 32A

Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. B Series (Schneider MG, legrand, Hager make) 63 A

Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. B Series (Schneider MG, legrand, Hager make)125A

Supply, installation & testing of G.I. earth station with perforated 40 mm dia and 4.50 Metre long heady duty G.I. pipe with necessary 40 mm dia. G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement 300 mmx300 mmx6 mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .

Extra for using salt (5 K and Charcoal (64 K in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt.

Supplying & laying of 8 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

Supplying including fitting fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department.DomesticVentilator RX 150 mm sweep (ORIENT make), Brisk Air 150 mm sweep Louver type (Crompton make)

Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988, LT armoured U.G. cable laid in pucca flooring, road crossing, drain crossing as per site requirement and partially in air to connection as approved by the Depts. the control switch, through medium duty G.I. pipe (Tata/ Nezone make or equivalent as approved by the Deptt) bend and socket including excavation and refilling the trench and making good damage done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make)35.00 Sq.mm 4 Core U.G. cable in 50mm dia medium duty hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.)

Supplying with fitting fixing of 16 amp two way modular clip in switch , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) in surface/ recessed system complete as per direction of department. 3 module type Metal

Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) in surface/ recessed system complete as per direction of department. 4 module type Metal

Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) in surface/ recessed system complete as per direction of department. 6 module type Metal

Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) in surface/ recessed system complete as per direction of department. 8 module type Metal

Supplying including fitting fixing of following MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. 3 module

Supplying including fitting fixing of following MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. 4 module

Supplying including fitting fixing of following MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. 6 module

Supplying including fitting fixing of following MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. 8 module

Supplying including installation of socket outlet 6/16 Amps 3/5 pin combine shuttered complete , MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department.

Supplying installation,testing and commissioning of passenger Elevator for 4stop(544 kg 8 persons) having contract speed of .65 Metre/Sec(approx.)mps serving different floor in the existing lift

Supplying including fitting fixing of following star rated A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection cable, as approved by the Deptt.s etc. as required complete and as directed by the Department [Without regulator]. (ORIENT PSPO make / Usha make/ CROMPTON make/ Havells/ ATC/ V GAURD make) Energy efficient 5-star 1200 mm sweep. ORIENT PSPO / Usha / CROMPTON / Havells/ ATC or equivalent make

Supplying with fitting fixing of surface & wall mounted LED luminaries complete with all accessories including 1.5 sq.mm PVC insulate S.C. copper conductor as required and as directed by the deptt.Phillips model LED Batten BN 550 WLED 6 3000/6500K or equivalent as approved by the deptt.

Supplying with fitting and fixing 100 watt electronic modular fan speed controller including making necessary connection as per direction of department.

Supplying with installation testing & commissioning of 8 w all in one solar street light with galvanised iron ploe 4 mm width with automatic sensor and IEC,RoHS,IP65 certified.

Payment of load security ,meter security etc. to ASEB , Rate as per ASEB app. Rate.

Supplying with istallation, testing and commissioning of Hi- wall 3 star rating, non ducted split type Air Conditioner of the following capacity with the cordless remote complete with indoor and outdoor unit, copper pipe and electrical connectionj upto 5 mtrs between the room unit and the outdoor unit as approved by the Deptt. and as directed by the deptt. 1,5 Ton Capacity voltas make Model Platinum 3S

Front Left & Right Speakers15" two way speaker with provision for hanging

Subwoofers 18" Active subwoofer

Stage Monitors Speakers 12" two way a stage monitor

Power Amplifier

Control Room & Green Room Monitors Speakers 5.25" Two-Way Vented System, Built-In Invisiball® Installation System, 150W Program Power, 8 ohms.

Power Amplifier

Mixer & Processor 12 channel mixer with FX

Loudspeaker Processor

Steel box with 8 microphone ports for stage

Microphones Vocal Microphone

Gooseneck Microphone

Instrument Microphone

Wireless Handheld Microphone

Wireless Lapel Microphone

Cables & connectors Speaker Cables

Speaker Cables

4 core Snake Cable

Microphone Cable

XLR Connector

Speakon Connector

Stereo / RCA Connector

Microphone Floor Stand

Microphone Stand

15 U Equipment Rack

Installation Installation, Testing & Commissioning

Supply and installation of mineral wool tile of size 595x595x15mm thk SteppeEdge, ( having density 100 Kg/m3, NRC0.90, fire rating Class 1/A & lightreflectance of 85%) suspended by usingT15 ceiling system which includes G.IMain-T MT15W36 at every 1200c/c and Cross-T CT15W12 at 600 mm c/c & CT15W06 at 1200mm c/c. wall angleWA15W30 is fixed along the perimeter of wall with fasteners. The suspension is done with all accessories like Soffit cleat, leveling clips & wire rods as per the dwgs.

Supply and installation of 12.5mm thick plain gyspum plaster board Suspended by using SoundStrut C System which includes Main channel MC45 at every 1200mm c/c and CC25 fixed perpendicular to MC45 @ every 600mm c/c.Wall Channel WC25 is fixed along the perimeter of the ceiling with fasteners. The suspension is done with all accessories like Soffit cleat, leveling clips & wire rods as per the dwgs.along the the perimeter as indicated in the drawing

Supply and installation of FS15 Vinyl Tracks fixed to the wood wool board of size 600x1200x15mm thick acoustical panels which is screw fixed on the Strut channels CC50 @ 600 c/c by using fasteners. CC50 channels supported from the wall with wooden slots as per design.The boards to be backlined with 50 mm 24 kg density glasswool. Fire Retardent fabric to be stretched and fixed on the vinyl tracks

Supply and installation of Plywood 1200x2400x9mm thk ply having density of 500-600 Kg/m3, NRC 0.2, fire rating Class A & Light reflectance 70%). Layers of 4mm ply is fixed on SoundStrut C22 by using fasteners. SoundStrut CC22 to be fixed horizontally on the wall @ every 600mm c/c. Veneer of approved color is then fixed on Plywood finished with polish of approved color. Veneered plywood to be backlined with Glass Wool 50 mm 24 kg density

Supply and installation of Ebony wood wool boards of size 1200x600x25mm thk having NRC 0.9, density 400 kg / m3 and Moisture resistance RH 90 with AnutoneStrut CC22 fixed horizontal to the wall at every 600mm c/c.Perpendicular to Strut CC22 first fix H-Splines, and insert panel into H-splines section and against wall.Panels backlined with glass wool of 50 mm 24 kg density

Supply of Par-64, 1000w , 240volt shielded beam available in three version i.e. sopt ,flood and wide flood,colour, temperature 3200k Base - extended Modul end Prog, Housing CRC sheet metal matt black finish with sufficient ventilation, with 2 mtr ,3 core wire,plug,Clamps. (Model No.PL-100 DL&MC)

Supply of Profile spot 26°750w HPL Lamp with Rated power up to 750w with great 750w lamp, faceted reflector removes 90% of IR heat from its beam, Interchangeable lens tubes rotating+250 , Four stainless-steel shutter blades assembly, Tool-free lamp position adjustment, insulated & safe rear handle,Rugged and grace ful die -cast aluminium construction, Power 220v/50Hz,Lamp 220vHPL750w G9.5,Color temperature 3200K, Available- 19/26/36/50° with 3 core copper wire with 15amp plug & Top,IRIS(Make :/DL&MC)

Supply of Spot light 1000watt 240v Halogen lamp T-11 type Reflector Spherical,Anodized finish,Lens Plano Convex Lens 150mm Dia, Housing CRC sheet, Color Black, Focusing Front/Back/Rotary Knob, 2 mtr. 3 core wire , plug top. (Make:-DL&MC-SL-100)

Supply of Halogen floods 1000w brandoor type with halogen tube,Reflector Aluminium Anodized finish,Color Black,Housing CRC sheet metal Holder 2 Nos.RTS/RX7S with silver tip contact. 2,mtr 3 core copper wire 3 pin plug top.(Make:-DL&MC HL-100/PROEL-PLAX 100E/CANARA Mumbai)

Supply of Cyclorama Flood light fitting 500w with halogen tube,Reflector Aluminium Anodized finish,Color Black,Housing CRC sheet metal Holder 2 Nos.RTS/RX7S with silver tip contact. 2,mtr 3 core copper wire 3 pin plug top.(Make:- DL&MC-CL-50/PROEL-500E/CANARA Mumbai)

Supply of Fresnal light 1000 watt/ 240v T-11 type with Brandoor,Reflector Spherical,Anodized finish,Fresnal Lens 150mm Dia,Housing CRC sheet„Color Black, Focusing Frount/Back/Ratary Knob,2 mtr. 3 core wire , plug top. (Make:-DL&MC-FL-100)

4 way patch panel for light point to inter change the light from different channel with moulded jack.

Supply of Light controller 12charmel Doble Preset/24 ch. Single preset(WIDE) DMX 512/1990 standred output 12/24 channel ,12 registers (asignable with scane memories or chase)+12 registers for the immediate modification of the channels,12 pages of registers (total 144 scane memories),12 programmable chase (level or on/off) with chase level independent.Manual funcation with flash keys and automatics cross-fade between the two preset (go funcation),Scane funcation with registers of memory ,flash mode,solo and crossfader,Regulation of the cross-fade time between two

Stage light point to be fixed on light bar,with 1.5mm 3 core copper conductor cable any ISI mark with suitable size conduit pipe/cable tray ,with 100mm x 100mm x 75mm deep socket box with 15 Amp multipine socket to be fixed on light bar,F.O.H. bar ,light ladders,F.O.H bar, & foot point to dimmer/patch panel

Side Light Ladder of 25mm x 50mm M.S.tube size (61x21)

48mm OD G I Pipe for lighting grid & lighting bar to be hnag from top with support of clamps. (Make:-JINDAL/TATA)

Electrical Installation

HVAC WORK : DX Type Floor Mounted Air Handling Units Supply, installation , testing and commissioning of doube skinned Horizontal Floor Standing Air Handling Unit in sectionalized construction having thermal break profile and comprising of the following sections. S/A, R/A and F/A Aluminium leak proof dampers along with mixing chamber. Pre Filter with aluminium frame . 4RD DX Cooling coils interwined , thermostatic expansion valve , thermostat and suitable to be operated from 4 Nos 11 Tr condensers ( All working) Centrifugal fan section with DIDW backward curved centrifugal fan with common base frame outlet damper with canvas connection , vibration isolators, TEFC motor and belt drive. All necessary control cabling . 17600 CFM , 44 TR , 45 mm wg Note: The AHU's are kept exposed to atmosphere. Manufacturer need to provide two layers apoxy painting on the external surface of AHU. MAKE : Zeco, Edgetech, Carryaire

Air Cooled Condensing Units Supply installation , testing and commissioning of air cooled condensing units complete with hermitically sealed rotary/scroll compressor with thermostatic expansion valve. The condensing unit enclosure should be factory painted to a smooth finish. The condenser should be complete with Catcher/Pilot type solenoid valves , Y strainer and all auxiliary accessories required for the given operation. (MAKE : Daikin, Bluestar, Voltas, Carrier, Hitachi, Emerson)11 Tr single circuitcondensing unit

AHU Starter Panels Supply, installation, testing and commissioning of PLC based HVAC Control Panel for DX Unit inclusive of :Touch-Screen with Pogrammable Logic Controller Temperature sensor input and temperature control algorithm with ODU Fault Diagonistic screen Input interface module for ODU HP and LP Trip , AHU O/L Trip Incomer MCCB with Door Interlocked Handle and mulfunction metering module. DOL starter for AHU Power feeder of suitable KW rating to supply power to each ODU Indication lamps for 3 phase, AHU On/Trip, ODU On/HP Trip/LP Trip Pushbutton station for independent switching of AHU and all 4 ODU in manual mode. Single Phasing, Phase reversal and Overload protection. Auto/Manual changeoverThe above system should be enclosed in Floor Standing single compartment IP 52 Enclosure with integral Handle and Lock, cooling fan and filter place. The Panel Shall be used to control 1 Nos 17600 CFM , 44 Tr AHU operated by 4 Nos 11 TR Condensers ( All Working )

Supply and fixing copper refrigerant piping using Rajco make bright annealed hard drawn copper refrigerant piping with 13mm thick armaflex nitrile tube insulation and GI wall fixing & ceiling suspension accessories as per site requirement complete in all respect.(Make : Rajco, Nissan, Mandev Tubes) Piping for 11 Tr System (1-3/8" & 7/8") (Hard Drawn)

Sheet Metal Ducting Supply , fabrication & fixing of of GSS sheet metal rectangular ducting as per IS 655 complete with turning vanes , companion flanges, structural support , sealing of all seams with a suitable metal sealant, completely leak proof as per drawings . 24 G

Sheet Metal Ducting Supply , fabrication & fixing of of GSS sheet metal rectangular ducting as per IS 655 complete with turning vanes , companion flanges, structural support , sealing of all seams with a suitable metal sealant, completely leak proof as per drawings . 22 G

Duct Thermal and Acoustic insulation Providing and Fixing external/exposed Ducting Insulation with 50 mm thick 16 kg/m3 density TF quality Expanded Polystyrene with CPRX bituminous compound and finished with 26G Aluminium sheet cladding.

Supply and fixing of duct thermal insulation with 19 mm thick Armaflex O class nitrile insulation with factory pasted Alum foil on one side pasted on the duct using Dendrite or equiv. adhesive. The insulation seams will be pasted with 50mm wide alum tape and PVC strapping roll strapping will be provided at 1000mm intervals.

Supply and fixing of duct accoustic lining inside the ducts with 13mm thick Armaflex O class open cell nitrile sheet pasted on the duct using Dendrite or equiv. adhesive. and harnessed with GI NUT Bolt.

Supply, installation, testing and commissioning of 550 CFM Imported Inline Fan for toilet exhaust :

Supply , fabrication & fixing of of GSS sheet metal rectangular ducting as per IS 655 complete with turning vanes , companion flanges, structural support , sealing of all seams with a suitable metal sealant, completely leak proof as per drawings. 24 G

Ceiling DiffusersSupply, installation, testing and balancing of square shape ceiling diffusers (egg crate type square shape ceiling diffuser)with VCD in extruded aluminium construction with powder coated finish complete in all respect as per drawings.

Grills Supply, installation, testing and balancing of Linear Discreet / Continuous Grill with 15 Deg Deflecting linear bars in extruded aluminium construction with powder coated finish complete in all respect as per drawings.

Supply , Installation , testing and commissioning of Door transfer Grills for Return Air in extruded aluminium construction with powder coated finish complete in all respect as per drawings.

M/S B.N.Garodia Construction & Engineering Pvt.Ltd.