Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹3.2 L
EMD Value
₹6,480
Closing Date
24 Feb 2023, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer Electrical
SKIMS Soura
Electric work for connection between Ortho OT/new Septic OT including some allied works (ICU) to make it operational at SKIMS MCH Bemina
2023_SKIMS_204771_1
eNIT NO.SIMS/HEE/E/ET/57 of 2022-23 Dt. 09-02-2023
Open Tender
Electrical Works
Item Rate
15 days
SKIMS MCH bemina
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
CAO SKIMS MCH Bemina
₹6,480
28 Feb 2023
10 Feb 2023
25 Feb 2023
10 Feb 2023
24 Feb 2023
11 Feb 2023
Amount
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in recessed steel/ PVC conduit as required. the existing surface/recessed conduit for light points, circuits.
3 x 1.5 sq. mm
P/f of Phenolic Laminated Sheet 3 mm thick of differents sizes 6"X9", 5"X5", 10'X8",12"10" with cutting of space for fixing of switches, socket outlet 5/6 A and for 15/16A switch and socket with screws & roval plugs etc. (2 no 15A socket & switch & 02 no 5A socket & switch below mentioned in item no 04 to be fixed in one plate in ICU = 8 nos foe medical equiements). Excluding the cost of Switch sockets.
P/F of switch F/T 15/16 A
P/F of socket F/T 15/16 A
P/F of switch F/T 5/6 A
P/F of 5 pin socket F/T 5/6 A
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in existing recessed steel/ PVC conduit as required. For light point circuits and 15/16 A power points.
3 X 2.5 sq. mm mm (for 15/16 A power points & Circuit wire for light points.
3 X 4 sq. mm for (15/16 A power points)
4 X 6 sq. mm as main
Supplying and fixing of 25 mm size of double locked channel for light points, power points and circuit wires. Whereever necessary.
Supplying and fixing of 25 mm sizes of medium class PVC conduit along with accessories in recess including cutting the wall and making good the same as required For 15/16A Socket out let and circuit wires where ever necessary for a bove mentioned Light points and circuits.
Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required for AC unit.
P/F of LED 4feet long batten 6000/6500k Light having extruded aluminium body with anti-glare diffuser with energy efficient electronic driver CRI ≥ 80 with minimum sytem lumens 2000 and maximum wattage 20 , IP 20 , surge proctection 2KV or more including connection with multistrand copper conductor 3 core cable etc as required at sitewith burning hours greater than 50000 Hours.
P/F of LED 2feet long batten 6000/6500k Light having extruded aluminium heat sink with anti-glare diffuser with energy efficient electronic driver CRI ≥ 80 with minimum sytem lumens 1000 and maximum wattage 15, IP 20 , surge protection 2KV or more including connection with multistrand copper conductor 3core cable etc as required at site with burning hours greater than 50000 Hours.
SITC of Wall mount fans 400 mm with Plastic Body as specified below 1.Governing standard I.S.2997 (Latest) 2..Power Consumption: Approx. 100 Watts 3.Power supply Single phase AC 230V, 50Hz 4.Speed: 1200 -1400 rpm with regulator 5.Sweep: 400 mm 6.Air Flow: 72-80 m3/min. 7..motor protection through thermal 8.overload protection device 9.It should have minimum 3 levels of speed control. Features: Suitable for mounting on walls with easy mounting arrangements, Noise level shall be within limits adjustable upward and downward tilt mechanism
Supply, Installation, Testing and Commissioning of 1200 mm sweep, Ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod with fan hook etc. 2nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019),THD less than 10% and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulationresistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
providing and fixing of switch type Fan regulater stepped type completed as required.
Supply installation testing and commissioning of matalic type 300 mm dia Exhaust fan along with bird guard to protect fan ,Double ball bearing with Heavy duty motor Rated speed = 1400 RPM, voltage -220 to 240 Volts Air delivery 1600 Mhr/min
Making of holes for installing of exhaust fans and P/F of wooden frame 12mm thick for 12"x12" sizes. Complete with civil work in all respects.
SITC of Electric Geyser of 50 liters capacities as mentioned below with following parameters . 1.Energy saving. 5 Star Certification by BEE 2. Provision of Temperature regulation by means of external Knob 3. Power Rating:- 220/ 230V, 50 Hz, Single Phase. 4. Maximum Rated Pressure.= 8 bar 5. Installation Type Vertical / Horizontal mounted as per site requirement 6. Body Type:- Rust, water proof and Shock Proof outer body with attractive looks and corrosion resistant inner tank made of cold rolled steel ,resistant to hard water. 7. Element Type:- glass coated heating element to prevent from corrosion and hard water. 8.Safety Valve maximum pressure =8 bar maximum 9. Energy efficiency feature:- Should have high density PUF insulation for energy Saving 10. Anti syphon system to prevent back flow of water. 11. Should have Indicating Lamps for ON & CUTT OFF. 12. Confirming to :IS 2082:2018 , IS 302-1, IS 302-2-21
Supplying and fixing of 6 way (4+18) Double door, three pole and neutral, sheet steel, MCB disreibution board, 415V on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (But without MCB).
Supplying and fixing following rating, four pole, 415 V, 63A MCB, 10 KA "C" curve to be fixed in the above DB complete with connections, testing and commissioning etc. as required.
Supplying and fixing Single pole 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of single poles in the existing/ new MCB DB complete with connections, testing and commissioning etc. as required.
Supplying and fixing 63A rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the above MCB DB complete with connections, testing and commissioning etc. as required.
Providing and fixing of adjustable type 125 A, 36 KA, FP MCCB. with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required one to be fixed in power control room IPD block and one in ICU as main..
Providing and fixing of adjustable type100 A, 30 KA, FP MCCB. with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required to be fixed one in main at main of ICU and one in Septic theatre as main..
P/F of sheet steel MCCB enclosure suitable for 100/125A 4 ploe MCCB complete with lockable door,dust/vermin proof, hinged type, cable entry and power coated painted to be fixed for above 100 A MCCB FP to be fixed one in main at main of ICU and one in Septic theatre as main..
Providing and laying of 70 sq. mm 3 ½ core/ XLPE Al. cable Armored, sheathed fresh ones. 1.1KV from main power control room IPD First floor to above mentioned DB .
Providing and laying of 25 sq. mm 3 ½ core/ XLPE Al. cable Armored, sheathed fresh ones. 1.1KV from main power control room IPD First floor to above mentioned DB .
Supplying and making end termination with and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
3.5 core 70 sq. mm(35mm)
3.5 core 25 sq. mm(35mm)
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.
Upto 70 sq. mm (clamped with 25x3mm MS flat clamp)
Upto 25 sq. mm (clamped with 25x3mm MS flat clamp)
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing from existing earth point upto DB's as required.
R.R. Builders
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .