REPAIR/ MAINT OF INTERNAL ELECTRIFICATION OF OTM AND MD ACCN ACCN AT KASAULI AND RIPAIR/ MAINT OF STREET/ SECURITY LIGHTS, TIMER, AND CONNECTED ITMES OF KASAULI AND DAGSHAI UNDER GE KASAULI

Amount

Schedule 'A' Section - I

Taking down carefully aluminium/ copper conductor point wiring (light, fan, light socket, power socket) complete fitting such as switches, sockets, lamp holder, utility light fitting, fan regulator, ceiling rose etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as specified and as directed.

M & L for point wiring with single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC casing caping of required size with all fittings and accessories alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one 5 amps socket point independent including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing sunken boxes for mounting of switch, socket etc incl taking down unsv if reqd complete all as specified and directed for the following :-

One Light/Fan point controlled by one, one way switch 6 Amp complete

One Bell point controlled by one, one way switch 6 Amp complete

One switch socket outlet 3 pin, 5 Amp on the independed board

One switch socket outlet 3 pin, 5 Amp on same board

All as per item No 2.00 here-in-before but 4.0 sqmm single core multi stranded copper conductor PVC insulated unsheathed (FRLS) cable 1100 volts incuding 4.0 sqmm stranded copper conductor (FRLS) PVC insulated greeen in colour as continous earth conductor connected to common earth and earth dolly with all accessories one 5 pin 16 Amp socket (Power point) on independent board complete all as specified and directed

M & L for point wiring with 1.5 sqmm single core multi stranded copper conductor PVC insulated unsheathed (FRLS) cable 1100 volts grade drawn through and including non metallic rigid PVC concealed/surface conduit 20mm dia or higher with all PVC conduit accessories with suitable size of anodised switch box concealed in wall for mounting of switches, sockets, fan regulators etc with 3mm thick ISI marked plastic laminated sheet with earth continuity conductor of size 1.5 sqmm single core copper conductor multistranded cable (FRLS) connected to common earth dolly for the following complete all as specified and directed :-

One Light/Fan point controlled by one, one way switch 6 Amp complete

One Bell point controlled by one, one way switch 6 Amp complete

One switch socket outlet 3 pin, 5 Amp on the independed board

One switch socket outlet 3 pin, 5 Amp on same board

All as per item No 4.00 here-in-before but 4.0 sqmm single core multi stranded copper conductor PVC insulated unsheathed (FRLS) cable 1100 volts incuding 4.0 sqmm stranded copper conductor (FRLS) PVC insulated greeen in colour as continous earth conductor connected to common earth and earth dolly with all accessories one 5 pin 16 Amp socket (Power point) on independent board complete all as specified and directed

M & L in replacement sub main wiring with single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm (Nominal area) drawn through in and including PVC casing caping required size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm as earth lead and connected to earth dolly and making good to disturbed surfaces etc after incl down unsv if reqd all as specified and directed.

S & F in repair/replacement switch piano flush button single pole one way, 6 Amps, 240 Volt incl taking down unsv complete all as per specified and directed

S & F in repair/replacement bell push piano flush type 5 amps , 240V incl taking down unsv complete all as per specified and directed

S & F in replacement buzzer ding dong, AC 230 volts Single Phase incl taking down unsv complete all as per specified and directed

S & F in repair/replacement socket outlet 2-in-1 5 pin, 6 Amps flush type complete all as specified and as directed.

S&F in repair/replacement switch piano flush button single pole one way, 16 Amps, 230/240 V incl taking down unsv complete all as specifed and directed

S&F in repair/replacement socket outlet 2-in-1 5 pin, 6 & 16 Amps flush type incl taking down unsv complete all as specified and as directed.

S&F in replacement PVC Plug Top 5 pin, 6 & 16 Amps flush type incl taking down unsv complete all as specified and as directed.

S & F in repair/replacemnt ceiling rose surface, backelite, three terminal, 240 volts incl taking down unsv complete all as specified and directed.

S & F in repair/replacement lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings incl taking down unsv complete all as specified and as directed.

S&F Wall mounted LED batten box type pre coated CRCA body suitable for retrofit LED tube rod 18/20 Watt fixed in repair incl taking down unsv complete all as specified and directed.

S&F LED self ballasted LED retrofit tube lamp 18 Watt with thermoplastic body min 1800 system lumens and builtin surge protection of 2.5 KV incl taking down unsv complete all as specified and directed.

S&F Wall mounted mirror light LED fitting self ballasted LED batten extruded thermoplastic body with PC diffuser in unique square shaped 10 /12 watt 2 Feet long CCT 6500K fixed in repair incl dismantling taking down unsv fitting any type complete all as specified and directed.

S&F Surface mounted LED bulk head 10 watt luminaire with ABS body & polycarbonate diffuser IP 65 including connecting to ceiling rose with 0.5 sqmm two core copper flexible conductor cable fixed in repair incl lamp incl taking down unsv complete all as per specified and directed.

S&F self ballasted LED Retrofit Bulb 5 Star Bulbs 9 Watt with PBT body shell and PC diffuser. 210 digree wide distruction CCT 6500K, B-22 cap, (Pin type), 230V, PF-0.95 (min) incl dismantling taking out unsv CFL/LED Bulb complete all as specified and as directed.

S&F self ballasted LED Retrofit Bulb 5 Star Bulbs 12 Watt with PBT body shell and PC diffuser. 210 digree wide distruction CCT 6500K, B-22 cap, (Pin type), 230V, PF-0.95 (min) incl dismantling taking out unsv CFL/LED Bulb complete all as specified and as directed.

S&F self ballasted LED Retrofit Bulb 3Watt with PBT body shell and PC diffuser. 210 digree wide distruction CCT 6500K, E-14 cap, (Thread type), 230V, PF-0.95 (min) incl dismantling taking out unsv CFL/LED Bulb complete all as specified and as directed.

S&F self ballasted LED Retrofit Bulb 3Watt with PBT body shell and PC diffuser. 210 digree wide distruction CCT 6500K, E-27 cap, (Thread type), 230V, PF-0.95 (min) incl dismantling taking out unsv CFL/LED Bulb complete all as specified and as directed.

S&F LED Slim panel size 2'x 2' ,36/40 Watt recess/ surface mounting edge lit LED slim panel having white powder coated extruded aluminium body with high quality LGP and PMMA diffuser , separate HPF driver suitable for Armstrong and grid ceiling separate accessories for recess /surface mounting PCGLP 2X 2, CCT 4000K fixed in repair incl dismantling taking out unsv one of any make/ size complete all as specified and as directed.

S&F Recess mounting ceiling fitting 1'X4' LED 36/40 Watt light Edgelit slim panel having white powder coated extruded aluminium body with high quality LPG and PMMA diffuser. Separate HPF driver. Suitable for Armstrong and Grid ceiling, PF min 0.95 complete incl dismantling taking out unsv one of any make/ size complete all as specified and as directed (As per existing Sample).

S&F Recess mounting ceiling fitting 1'X1' LED 18/20 Watt light Edgelit slim panel having white powder coated extruded aluminium body with high quality LPG and PMMA diffuser. Separate HPF driver. Suitable for Armstrong and Grid ceiling, PF min 0.95 complete incl dismantling taking out unsv one of any make/ size complete all as specified and as directed (As per existing sample).

Supply and fixing building security LED light 25 Watt energy saving LED ASTRA NEO street light made up of pressure dia cast housing with toughened glass and high power LEDs with option of secondary optic with IP66 protection, efficacy : 110LM/W one GI medium grade 25mm dia bracket of total lenghth 50 cm incl 2 Nos MS Clamp and fastners after dismantling taking down unsv one all as specified and directed.

S&F MCB DB TPN 4 way double door, IP 42, CRCA sheet powder coated vertical type factory made suitable for incorporating MCB as out going and MCB as incoming including connecting incoming and outgoing cables & blaking plate as required incl taking down existing unsv DB of any size and making good distrubed surface to match with existing complete all as specified and as directed. (Note :- Connection of cable in the DB Boxes/MCBs/MCCBs will be done with suitable thimble).

S&F MCB DB SPN 4 way double door, IP 42, CRCA sheet powder coated, factory made suitable for incorporating MCB as out going connecting incoming and outgoing cables & blaking plate as required including taking out existing unserviceable DB of any size and making good disturbed surface to match with existing incl taking down unsv complete all as specified and as directed. (Note :- Connection of cable in the DB Boxes/MCBs/MCCBs will be done with suitable thimble).

S&F MCB DB SPN 8 way double door, IP 42, CRCA sheet powder coated factory made suitable for incorporating MCB as out going connecting incoming and outgoing cables & blaking plate as required incl taking out existing unsv DB of any size and making good disturbed surface to match with existing incl taking down unsv complete all as specified and as directed. (Note :- Connection of cable in the DB Boxes/MCBs/MCCBs will be done with suitable thimble).

S&F MCB TPN 63 Amps, 10 KA 415 Volt, 50 Hz, IS/IEC 60898-1, 'C' curve including taking down unserviceable complete all as specified and as directed. (Note :- Connection of cable in the DB Boxes/MCBs/MCCBs will be done with suitable thimble).

S&F MCB SPN 32 Amp to 40 Amp, 10 KA, 240 volts, IS/IEC 60898-1, 'C' curve including taking down unserviceable complete all as specified and as directed. (Note :- Connection of cable in the DB Boxes/MCBs/MCCBs will be done with suitable thimble).

S&F MCB SP 6 Amp to 32 Amp 10 KA, 240 volts, IS/IEC 60898-1, 'C' curve including taking down unserviceable complete all as specified and as directed. (Note :- Connection of cable in the DB Boxes/MCBs/MCCBs will be done with suitable thimble)

S&F Single pole and neutral enclosure with a two pin and earth plug and socket board with IS 13032, IS 8623 complete with one single pole 20 amp MCB complete incl dismantiling taking out unsv complete all as specifed and directed by Engr -in-Charge.

S&F Heating Element ISI Marked round/ tringular base, push type or thread type including rubber washer for 1.5/2.0 KW suitable for geysers 25 Ltrs to 50 Ltrs capacity (as per existing sample) including taking down unserviceable complete all as specified and as directed.

S&F thermostat ISI Marked suitable for geysers 25 Ltrs to 50 Ltrs capacity (as per existing sample) including taking down unserviceable complete all as specified and as directed.

S&F Chromium plated connections 45 Cm long for Hot/Cold water of 15mm size with cromium nuts and washsers fixed as in repairs complete all as specified.

S & F in repair/replacement of PVC gang box suitable for 6 Amp Socket and 6 Amp switch complete all as per specifiec and directed

S & F in repair/replacement of PVC gang box suitable for 16 Amp Socket and 16 Amp switch complete all as per specifiec and directed

Supply only electric insulation tape heavy duty complete all as per specifed and directed

S&F in Replacement Exhaust Fan 250mm plastic body , 1400 RPM with air delivery 1050 CMH including and taking down unserviceable, complete all as specified and directed

S&F in Replacement Exhaust Fan 300mm Sweep metal body (Heavy Duty), 1400 RPM with air delivery 1050 CMH including and taking down unserviceable, complete all as specified and directed.

S&F 40 Watt post top fitting powder coated aluminum die cast and spun aluminium with decorative clear diffuser suitable for landscape lighting in 5700K CCT and IP 65 protection fixed in repair including and taking down unserviceable complete all as specified and directed.

S&F Recess mounting ceiling fitting 6" round dia 9/12 Watt light Edgelit slim panel having white powder coated extruded aluminium body with high quality LPG and PMMA diffuser. Separate HPF driver. Suitable for Armstrong and Grid ceiling, PF min 0.95 complete incl dismantling taking out unsv one of any make/ size complete all as specified and as directed (As per existing sample).

Excavation in trenches not exceeding 1.5 meter wide and not exceeding 1.5 meter in deep getting out in hard/dense soil for stay assembly/laying of cable/errection of poles etc complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick.

Removing of excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point.

M&L for taking out old unserviceable and supply, laying, fixing Double walled corrugated HDPE duct pipe of 50mm outer dia confirming to IS-14930 (Part-II) of approved colour with fittings for cable protection complete all as directed.

labour for taking out carefully old/unserviceable UG cable any type any size from trenches/poles/ducts/LT panels after dismantling ends from OH conductors/MCCBs/joint boxes for relaying/refixing or carrying to store for Sch of Credit.

Material and labour for fixing or passing through pipe, laid in trenches or fixed to pole/wal or fixed to LT panel board, 1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed 6.0 Sqmm 2 core with required aluminium cable lugs all as specified and directed.

All as per item No. 51.00 here-in-before but 10 Sqmm 2 core complete all as specified and directed.

All as per item No. 51.00 here-in-before but 16 Sqmm 3.5 core complete all as specified and directed.

Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground (earth pit nbot less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below notmal ground level, connected to galvanised earth lead wire 4.0mm dia by means of suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 type B-1, precast RCC cover in 1:2:4 reinforced with expanded metal, with suitable handle, excavation and earth work in any type of soil and including medium grade GI watering pipe 25mm bore with funnel wire mesh and light grade GI wire protection pipe 25mm bore up to main board complete as shown in electrical plate No 3 of MES schedule Part-I 2009, connected to earthing testing point including taking out existing unsv earthing complete ass as specified and testing on completion complete ass as specified and directed Note - The units rate including the cost of excavation & earth work in any type of soil, charcoal & salt in alternate layers, 25mm GI pipe (light grade) for watering 25mm GI protection pipe (light grade) funnel wire mesh PCC chamber in PCC 1:3:6 type C-1 cast iron frame and 40mm thick RCC cover for pit etc & no extra payment will be made.

S&F GI tubing light grade 50mm bore, ISI marked, for cable protection in road crossing .

S&F 1100 volts grade heavy duty flat twin core cable PVC insulated with stranded aluminium conductor of size 4.0 sqmm and overall PVC sheathed to pass through the street light pole from junction box to street light fitting incl dismentling taking down unserviceable one all as specified and directed.

S&F 1100 volts grade heavy duty flat twin core cable PVC insulated with stranded aluminium conductor of size 6.0 sqmm and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension GI wire from OH conductor to building incl dismentling taking down unserviceable one all as specified and directed.

All as per item No. 57.00 here-in-before but 10 Sqmm complete all as specified and directed.

M&L for painting of steel tubular pole with one coat of alumium paint incl cross arm, bracings, supports, nuts, bolts, of LT OH line from above copping to top of pole and marking with alternate white and black paint strip 30 cm wide (5 Nos) with synthetic enamelled paint all as specified and directed.

labour for taking down carefully flood/street/gate light fitting any type any make any capacity from Pole/Building for repair or for fixing in other position all as specified and directed.

S&F LED Street light fitting 45Watt new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 road luminaire with high power LEDs as light source and electronic driver.

S&F of 45watt Inverter LED Street Light with IR Sensor for automatic On-Off of street light and shall have inbuilt Li-on battery for 90mins power backup in case power failure. Housing of fixture shall be presurre die cast and system efficacy >100LPW,CRI >70,CCT 5700K ,PF > 0.9,THD<15%.

S&F Security light Bracket made out of galvanised steel light grade pipe of 40mm dia 1.5 mtr long bend to an angle of 120 degree with 02 Nos mild steel clamp 50mm x 50mm and 04 sets of nuts, bolts and washers painting with two coats of synthetic enamel paint over a coat of red oxide primer incl dismentling taking down unsv complete all as specified and directed.

S&F Street light junction box of size 200mm x 140mm x 95mm outdoor type, weather proof, factory made out of PVC sheet 1.8mm thick with front side hinged opening having locking arrangement with nuts & bolts & arrangement for incoming and out going cable/wire complete comprising with the followings incl dismentling taking down unsv complete all as specified and directed. :- (a) Bus bar with two aluminium strips, 63 Amps capacity insulated with insulators, including colour coding, including PVC cable of suitable size from bus bar to MCB (b) MCB SPN 5 to 30 Amps - 01 No (c) Clamps made out of 25mm x 3mm flat iron duly weldedwith nuts & bolts complete all as specified and directed.

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

Supply and fixing 200 Watt LED flood light luminaine with ultra sleek ,light weight HT and with secondary optics ,made of pressure die cast housing with IP 66 ingress protection and impact resistance of IK 07 4 KV internal dsingle protection all as specified and directed.

Amount of credit of Rs. 104493.00 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender.

Rajesh Agencies

NARINDER KUMAR SONS

Varindera And Varindera Construction

M/S VINOD KUMAR BANSAL

bharat refrigeration and electric co.

Ayushmat Contractors