Loading…
Loading…
Tender Value
₹4.2 L
EMD Value
₹4,220
Closing Date
1 Jul 2026, 4:00 pm
Similar tender results from the same govt authority in the past 3 years.
University Engineer
Kakatiya University, Hanumakonda
Construction of Parking Shed with GI Colour coated Sheets at Buildings Division, KU Campus
710487
02/KU/DB/26-27, Dated: 22-06-2026
OPEN
Civil Works
WARANGAL (URBAN)
8 documents required · 8 mandatory
₹150
₹4,220
20 Jun 2026
20 Jun 2026
23 Jun 2026
Earth work excavation and depositing on bank with an initial lead of 10 mts. and initial lift of 3m in Loamy & Clayey Soils like BC Soils, Red Earth & Ordinary Gravelly Soils (SS 20-B) including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work excluding seignorage charges and dewatering charges etc., complete
Plain Cement Concrete corresponding to M5 grade as per IS 456 equivalent to (1:5:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and conbveyance of all materials, all operational, incindental and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc, complete but excluding seignorage charges for finished item of work
Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work.
Filling with good quality Gravel in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cms thick consolidating each deposited layer by watering and ramming, including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., complete for finished item of work for compacted thickness
Plain Cement Concrete corresponding to M15 grade as per IS 456 equivalent to (1:2:4) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size Hard Balsted Granite (IS383, 1970) Machine crushed graded metal from approved quarry including cost and conbveyance of all materials, all operational, incindental and labour charges such as mixing, laying , curing concrete, etc, complete but excluding seignorage charges for finished item of work
Random Rubble stone masonary, in CM (1:8) prop: (Cement Sand) using HBG stones from approved quarry including cost and conveyance of all materials like HBG stones, cement, sand water, etc., to site including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as cutting stones to required size and shape, mixing of cement mortar, constructing masonry, curing etc., complete for finished item of work for foundation and basement.
Roofing with pre painted Galvanume Trapezoidedal profile Roofing sheets with 0 .5mm thickness, Coating Alu- Zinc -CoatingAZ 150 GSM . Tensile strength 550 MPA, paint coating with regular modified polyster painting thickness top 18to 20 microns, bottom 5 to 7 microns and using suitable size of 1.020mX upto 12 .00m fixing with G.I ‘J’ bolts & nuts 8 mm dia GI / bitumen and limpet washers filled with white lead etc complete for finished item of work, but excluding the cost of purlins, rafters, trusses & cost of conveyance of all materials – upto 60 degrees pitch.
Supplying and fixing of Pre-painted Galvanized Ridge Pair Sheet of medium 0.50mm thickness width 0.585mts. Length of maximum 2.50mts over the roof sheeting including cost and conveyance of all materials all operational, incidental, labour charges such as cutting, bending, fixing in position to work site etc., complete for finished item of work
Fabrication, supply and fixing in position LADDER type Pole with 2' dia - 3.40 mts. - 11'-3" length jointing 1" dia at 0.30 c/c and bottom with base plate of size 0.50x0.30x0.06 mts fixed with foundation both 4 nuts hold faith on top of ladder 65x65x6mm-2Nos. and painting 2 coats enamel paint over primer including cost and conveyence of all materials all perational, incidential labour charges such as cutting, bending, fixing in position concrete bed transportation to work site etc., complete Verticle Ladder
Fabrication, supply and errection of 18'-10" = 8.70 mts. length TRUSS using 2" dia MS Pipe for bottom to top member and 1" dia in supportors included members or both ides and 6mm thick L-Angular 150x100mm MS angular joint purlins eleate of size 150x100mmx0.006mts thick nut bolt and base plate of 0.45x0.20x0.006 mts to the bottom member painting 2 coats enamel paint over a primer including cost and conveyance all materials, all operational, incidental labour charges such as cutting, bending, welding fixing in position, transportation to work site etc., complete for finished item of work Truss
Fabrication, supply and fixing in position of Purline 3.00 mts. length on either side of purlin 2-Nos. of cleats of size 100x50x0.006 mts. thick fixed between trrusses on both sides and painting 2 coats enamel paint over primary including cost and conveyance all materials, all operational, incidental labour charges such as cutting, bending, welding fixing in position, transportation to work site etc., complete for finished item of work
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
1.Booklet.docx
TENDER_DOCUMENT • 2.78 MB
NIT.doc
TENDER_DOCUMENT • 0.07 MB
BOQ(BD parking Shed).xls
TENDER_DOCUMENT • 0.06 MB
Download all tender documents and submit your bid