Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹13,300
Closing Date
12 Oct 2026, 10:00 am3d left
Executive Engineer kasumpti Division HPPWD Shimla3
Executive Engineer kasumpti Division HPPWD Shimla3
Change of damaged roof and other repair work in out house Set no. 4 under Kasumpti Shimla-171009.) (Excluding GST
2026_PWD_144742_2
SD-I-CTR-Tender-2026- 18723 dt 30-09-2026
Open Tender
Civil Works
Percentage
30 days
Shimla
As per SBD
12 documents required · 12 mandatory
₹350
₹13,300
3 Oct 2026
3 Oct 2026
12 Oct 2026
3 Oct 2026
12 Oct 2026
3 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Demolition of brick work above G.L upto floor all leavel including stacking of serviceable material with in all leads ( Servicable materials to be stacked properly and handed over the department free of cost). Including carriage of materials in all leads and lifts. (a) In cement mortar. (Excluding GST) | 15.25 | Per Cubic Metre | 1,144.07 | ₹17,447.07 |
| 2 | Brick work with common burnt clay F.P.S (Non modular) bricks of class designation 7.5(seven point five) in superstructure above plinth level up to floor V level in all shapes and sizes in.(i) Cement mortar 1:6 (One cement : six coarse sand) including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge. (Excluding GST) | 15.25 | Per Cubic Metre | 7,203.39 | ₹1,09,851.7 |
| 3 | Half brick masonary work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5(seven point five) in superstructure above plinth level up to floor V level in all shapes and sizes in.(i) Cement mortar 1:4 (One cement : four coarse sand) including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge. (Excluding GST) | 50.82 | Per Square meter | 1,059.32 | ₹53,834.64 |
| 4 | 15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)Cement Mortar 1:6 (one Cement: Six Sand). (Excluding GST) | 112.47 | Per Square Metre | 254.24 | ₹28,594.37 |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form work for including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. (i) Suspended floors , roofs and the like(Excluding GST) | 3.6 | Per Square Metre | 364.41 | ₹1,311.88 |
| 5.1 | (ii) Edges of slabs and break in floors and walls (a) Under 20 cm (Excluding GST) | 12 | Per Running Metre | 186.44 | ₹2,237.28 |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge. (i) Thermo-Mechanically Treated bars of grade Fe-500 D or more . (Excluding GST) | 100 | Per Kilogram | 88.98 | ₹8,898 |
| 7 | Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering - All work up to plinth level including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)1:1.5:3 (one cement : one point five coarse sand : three graded stone aggregate 20 mm (twenty milimetre) nominal size) (Excluding GST) | 3.6 | Per Cubic Metre | 6,440.68 | ₹23,186.45 |
| 8 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. Internal work Providing and fixing high pressure PVC spigot and socket , waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete. (Excluding GST) | 35 | Per Running Metre | 550.85 | ₹19,279.75 |
| 9 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 90 mm dia. (Excluding GST) | 10 | Per Running metre | 381.36 | ₹3,813.6 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.97 MB
SBD665061.pdf
Tender Documents • 7.09 MB
BOQ_215339.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .