Ordinary repair and maintenance as well as new works, additions and alternations to existing structures & emergent Works in FZR (excl.)-BTI (excl.) and KKP-FKA (excl.) section (Zone No-4) in the section of SSE/Works/KKP under ADEN-I/FZR (2026-27).

Item Breakup - C-NR-HQ-IR-USSOR 2021-3-Ver-3

120.00 minimum 1.10 cum bucket capacity

12.00 of 12T capacity for misc. works of handling of material

90.00 other misc. works. Total 131641.14

Item Breakup - D-NS ITEMs

NS-1 0.3-0367 Portland Cement (OPC-43 Grade)

NS-2 0.3-0637 Bright finished or black enameled 100 mild steel screws 40 mm Nos.

NS-3 0.3-0639 Bright finished or black enameled 100 mild steel screws 25 mm Nos.

N S-4 0.3-0661 Oxidised mild steel sliding door Each bolt 250x16 mm

NS-5 0.3-0704 Anodised Aluminium handles 100 10 Nos. mm with plate 150 x 32 mm

NS-6 0.3-0773 Unslaked lime

NS-7 0.3-0833 Synthetic enamel paint in black or Litre chocolate shade

N S - 8 0.3-0834 Synthetic enamel paint in all Litre shades except black or chocolate shade

NS-9 0.3-0983 Fine sand (zone IV)

NS-10 0.3-1219 M.S. Wire nails

NS-11 0.3-1875 White plastic seat (solid) with lid Each C.P. brass hinges and rubber buffers

N S - 1 2 0.3-1922 H.P. or L.P. ball valve with Each polythene floats: 15 mm dia

NS-13 0.3-1947 Vitreous china flat back wash Each basin 630x450 mm

NS-14 0.3-1954 Vitreous china orrisa type W.C. Each pan of size 580 mm

NS-15 0.3-2456 Hydraulic door closer bottle type Each M.S. body with necessary accessories and screws complete

N S - 1 6 0.3-2459 Anodised Aluminium hanging Each type door stopper

N S - 1 7 0.3-2406 Float glass panes of nominal Sqm thickness 4 mm (weight not less than 10 kg/sqm)

NS-18 0.3-2412 Ply wood 5 ply with commercial Sqm ply on both faces 6 mm thick

NS-19 0.3-2413 12 mm commercial ply

NS-20 0.3-7029 Galvanised wire mesh of average Sqm width of aperture 1.4 mm and nominal dia of wire 0.63 mm

NS-21 0.3-7105 Coloured Pedestal type W.C. pan Each 580x440 mm (European type)

NS-22 0.3-7117 Semi Rigid PVC waste pipe for Each sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings FEROZPUR DIVISION-ENGINEERING/NORTHERN RLY

NS-23 0.3-7126 White Vitreous china 10 litre (full Each flush) capacity controlled low level flushing cistern with all fittings

NS-24 0.3-7259 C.P. Brass long body bibcock 15 Each mm

NS-25 0.3-7385 3 mm thick translucent white Sqm acrylic plastic sheet

NS-26 0.3-7400 15 mm PTMT bib cock

NS-27 0.3-7407 PTMT push cock 15 mm dia

NS-28 0.3-7863 15 mm nominal bore and 45 cm Each length PVC connection pipe with P.T.M.T. Nuts

NS-29254120 (USSOR 2010) 254120 Supply of Kg snowcem

NS-30256070 (USSOR 2010) 256070 Misc. GI pipe Kg fitting

NS-31256190 (USSOR 2010)256190 PTMT 125mm Each grating

NS-32257850 (USSOR 2010)257850 CP brass Each waste coupling 32/40mm

NS-33 Supply of sodium hypo chloride solution Kg (including chlorine)

NS-34 Providing & fixing and lowering of the Metre required length of PVC pipe 150mm dia of 8kg / cm2 specification including required length of stainer with necessary PVC fittings complete surrounded with the gravels or coarse sand (excluding the cost of gravel or coarse sand which will be paid extra under relevant USSOR.. The work shall be complete in all respects with all L&M misc. & incidental works related to the job. as per direction of Engineer-in-charge at site to his entire satisfaction.

NS-35 Providing, lowering & fixing submersible Each pump motor ofapproved quality of singlephase1.5 to 2.0HP with cable uptoswitch board including switchpanel. Complete but including thecost of PVC ( HD) required diariser pipe Board / Panel will befixed in quarter

NS-36 Supply of Insecticide/Pesticide/Weedicide Litre 161019 Glyphosate

N S - 3 7 Rendering 12 months service for Per Day maintenance of Railway colonies and other Service buildings including all tools & plants by supplying artisan staff, masons, carpenters , painters , blacksmith, fitters, pump operator, helper / khalasi ,sweepers on all working days in the week excluding Sunday & Holiday etc.along with all tool and equipments. No extra charges will be given to the contractor for transportation of material required for execution of any work. Contractor has to make his own arrangement for transportation of material, man power, tools etc. at all the time during the contract. All the consumable material required i.e. Cement, steel, Wood, bricks, sand, Paint, Sanitary fittings,etc. shall be supplied by the railway. The rates includes cost of Employer's PF contribution, tools and plants prescribed minimum wages by Central Govt. and contractors profit. Work is to be executed as per special condition of contract. Payment will be made on Monthly interval on the basis of man days of working of each of the following category during the monthly period only and as per special conditions of the contract.NS- 37 (a) Carpentor 1 No

NS-37 (b) Painter 1 No

NS-37 (c) Mason 1 No FEROZPUR DIVISION-ENGINEERING/NORTHERN RLY

NS-37 (d) Helper/Khalasi 5 Nos Total 5944674.65