Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.3 LAccepted-AOC | L1 | Accepted-AOC L1 BIDDER | |
| 2 | L2₹42.7 L+₹7,012 (0.16%)Rejected-Finance | L2 | Rejected-Finance HIGHER THAN L1 BIDDER | |
| 3 | L3₹45.8 L+₹3.2 L (7.54%)Rejected-Finance | L3 | Rejected-Finance HIGHER THAN L1 BIDDER |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
26 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
MAJ VISHAL BHURIA
GE I Kanpur Cariappa Road Cantt Kanpur 208004
REPAIR TO JOINERY, BRICK WORK AND OTHER REPAIR WORK IN ZONE-III AREA UNDER AGE B/R-II OF GE (I) KANPUR
2023_MES_630290_1
GE(I)/KAN/T-76 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
KANPUR
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE(I) KANPUR
₹96,000
Yes
18 Mar 2024
29 Nov 2023
2 Jan 2024
29 Nov 2023
26 Dec 2023
12 Dec 2023
Amount
Taking down chowkhat or frames with shutter (without taking off shutters from the frame) n. exc 1.5 sqm complete all as specified and as directed.
Taking down chowkhat or frames with shutter (without taking off shutters from the frame) exc 1.5sqm but n.exc 4.00sqm complete all as specified and as directed.
Taking down shutters of any description exc 1 Sq.m and n.exc 2 sq. m each complete all as specified and directed.
S & F solid PVC Moulded door frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet reinforced with MS Square tube edges will be painted to match with prelam sheet as per specification & drawing incl. making good the damaged wall with plaster or concrete complete all as specified and directed.
S & F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm prelam PVC sheet on back face as per specification & drawing, complete all as specified and directed.
S&F 100mm butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed for PVC door, type C-21complete all as specified and directed.
S & F Aluminium 125 mm, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S & F 125 mm long Extruded aluminium ally handles, fabricated type., anodised complete all as specified and directed.
S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of decorative type/wood grain printed colour of size 50 X 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
All as per item No. 9 above, but size 50 x 125mm completed all as specified and directed.
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type/wood grain printed colour flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade),calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge.
S&F for Factory made solid panel PVCdoor shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded decorative type/wood grain printed colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; wire gauzed i.e. panel will be of wire gauze in lieu of wood grain printed PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly of wood grain printed colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900) used instead of exposed portion of PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per direction of EIC.
S & F 100 mm size Butt hinges, medium weight, cold rolled mild steel, and fixed, complete all as specified and directed.
S & F 150mm size extuded aluminium handle fabricated type anodized complete all as specified and directed.
S & F 200 mm aluminium anodised barral tower bolt of extruded section complete all as specified and directed.
S & F 300 mm long aluminum anodized sliding door bolt with hasp and staple and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fixed complete all as specified and directed.
S&F 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
S & F of 75mm long aluminum anodised extruded type door stopper of double legged with rubber shoes in bottom complete all as specified and directed.
S&F powder coating (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.
S&F powder coating (minimum thickness of powder coating 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, tower bolt, sliding door bolt, etc. as per requirement, anodised aluminum snap beading screws etc. complete all as specified & directed by Engr-in-Charge.
M&L 12mm Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber/GI/ Aluminium framework with screws for door, cupboard self, etc., complete all as specified and directed.
S&F 5.50mm thick sheet glass, ordinary quality in square exc 0.5 sq.m in each, complete all as specified & directed.
Material and labour for door closer hydraulically regulated aluminum (die cast) body, designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg, complete all as specified and directed.
All as per item No. 24, above, but wire gauzed window, complete all as specified and directed.
All as per item No. 24, above, but window area exc 1 sqm but not exc 2.00 sqm each , complete all as specified and directed.
All as per item No. 24, above, but window area exc 1 sqm but not exc 2.00 sqm each, complete all as specified and directed.
S&F Framed work such as grills, grating etc. with ends of bars shouldered and / or riveted or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.
S&F factory made steel tubular Steel ventilators with top hung shutter including hinges, steel peg stay complete all as specified and directed by Engr-in-Charge.
S&F 3mm thick figured glass, pin head type in squares n.exc 0.5 sq. m in each pane fixed with putty or beads/clips, etc. complete all as specified and directed by Engr-in-Charge.
Hacking out old broken glass (any thickness, size, quality or description) from wooden /metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
S&F 3mm thick sheet glass, ordinary quality in square n.exc 0.5 sq.m in each fixed with putty or beads/clips, etc. complete all as specified & directed.
S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples
M&L for Easing of door / window shutters of any size/any description / any number of panels for easy closing / opening tightening of hinges or changing the position of hinges adjustments of tower bolts, sliding bolts etc complete all as specified and directed.
S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and 1.40 mm averaage width of operature fixed with tinned tacks or galvanished wire staple complete all as speficied & directed.
S&F, stainless steel curtain rods of 25mm dia as in doors/ windows pelmets.SS brackets fancy type , including screws and other necessary fitting for fixing brackets SS Funnels for 25 mm dia dropry rods, fixed at each end of rods complete all as specified and directed. or equivalent as specified.
Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595mm of approved texture with Semi perforated 12mm thick micro tegular edged GRG false ceiling tiles, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @120 grams per sqm including both sides) comprising of main-T runners of size 15 x 32 mm of length 3000mm, cross-T of size 15 x 32 mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @80 grams per sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing, complete all as specified and directed.
Taking down Wall panelling and similar work complete all as specified and directed.
S&F 5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining including suitable fillet, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site. complete all as specified and directed.
Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubing down with water etc complete all as specifed and directed.
Demolition of brick work built in cement mortar complete all as specified and as directed .
M&L Brick work with old size flyash bricks straight or curved in plan exceeding 6 mtr mean radius built in cement mortar (1:6) complete all as specified and as directed.
M&L Brick work (except bricks) old size sub class ' B' brick straight or curved on plan exceeding 6 mtr mean radius built in cement mortar (1:6) complete all as specified and as directed.
M&L 15mm thick rendering on fair faces of brick wall in CM 1:4 finished even & smooth complete all as specified and directed.
M&L for 15 mm thick rendering in cement mortar (1:6) on fair faces of concrete or brick, finished even and smooth without using extra cement complete all as specified and directed.
M&L for 10 mm thick cement plaster on ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of newly plastered surfaces of wall and applying two coat of cement base paint (any Colour ) over a coat of primer complete all as specified and directed.
M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.
M&L for preparation of newly plastered surfaces of walls including cornices plaster etc and applying two coat oil bound distemper of any colour on over a coat of primer over applying a coat of wall care putty on wall including rubbing with sand paper to achieve a smooth surface and sharp straight edges etc complete all as specified and directed.
M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
Preparation of old decorated surfaces of walls including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc of surfaces & leveling/ edging the disturbed places/edges using necessary filling of wall care putty to obtain smooth regular/ even finish using sand paper and applying One coats of oil bound distemper (of any colour), complete all as specified and directed .
M/L for complete removal of existing treatment & preparation of old decorated surfaces of walls, cornices etc including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc and applying Two coat of cement paint (any colour ) on wall with brush complete all as specified and as directed.
M & L for Demolition of RCC work of any description and in any position (reinforcement cut as required to facilitate demolition), complete all as specified.
S&F for providing precast cement concrete louvres and jallies, 45mm thick (measured solid) type B0 1:2:4 (12.5 mm graded aggregate) set in cement mortar 1:4 including all mouldings but excluding frame, complete all as specified and directed.
M&L reinforced Cement Concrete (nominal mix) Type B0 1:2:4 (using 12.5 mm graded granite stone aggregate) in Beams,bands, cantilevers, lintels over 1.5 M span. Complete all as specified and directed.
Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips quality complete all as specified and directed.
S&F TMT bars 5mm dia and over upto 10mm dia bar as in stirrups cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Form work to bottom, sides and soffits of bands, lintels, cantilevers, shelves including supports etc complete all as specified and directed.
Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
Dismantling posts or struts (wood, steel or R.C.C.) embeded in concrete, brick work masonry etc, any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.
Dismantling wire mesh fencing any type complete all as specified and directed.
Demolition of concrete in ground floors and paving n exc. 15cm thickness (below or above ground level) un-reinforced concrete & removal of rubbish beyond defense land complete all as specified and directed.
Excavating in post holes (or similar holes) in soft/loose soil each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed.
M&L for PCC 1:3:6 Type C2 (40mm graded aggregate) as in foundation/post holes, etc Complete all as specified and directed.
S&F Mild steel angle iron for posts and struts as in fencing post including cutting tops to shape as directed, drilling holes, notching for wire, etc ; flat iron fillets (for securing wire mesh etc.) including all necessary drillings, bolting or riveting, etc. and similar confirming to Fe 290 Gde E-165 complete all as specified and directed.
S&F mild steel galvanised chain link fencing made of galvanised steel wire dia of wire not less than 2.50 mm of fixed to flat iron rails with RCC/angle iron post all as specified and directed.
S&F in repairs Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and directed (Each line wire to be measured).
S&F in for mild steel bolt machine made with hexagonal or square heads at one end and screw the other to be fitted with washer etc and one hexagonal or square not exc 5cm long end dia of neck 12mm including taking out old unserviceable bolts with nuts and washers complete all as specified and directed.
M&L for mild steel plain straining bars 10 mm dia cut to length bent to shape required including making hooks at end woven in chain link and fixed with nut and bolts Fe 410 (W)Gde Fe 410-W(Gde E-250) quality -A or Fe-290 (Gde E-165) complete all as specified and directed.
M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitings and hanging also fastening and fixing complete all as specified and as directed. (Fe-290 Gde E-165)
M & L for preparation of new steel or iron surfaces of any description n exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of primer of zinc chrome red oxide complete as specified and directed.
M&L for preparation of new steel or iron surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat zink chrome red oxide primer complete all as specified and directed.
M/L for Overhauling of rolling shutter of following sizes, without taking down from position, by applying grease for trouble free operation all directed:-
All as per item No. 73 above but area n.exc. 8 Sqm complete all as specified and directed.
All as per item No. 73 above but area exc. 8 Sqm & n.exc. 12 Sqm complete all as specified and directed.
All as per item No. 73 above but area exc. 12 Sqm & n.exc. 20 Sqm all as specified and directed.
All as per item No. 73 above but area exc 20 Sqm & n.exc .26 Sqm all as specified and directed.
All as per item No 73, above but taking down and refixing of following sizes:-
All as per item No. 78 above but Area n.exc. 8 Sqm complete all as specified and directed.
All as per item No. 78 above but Area exc. 8 Sqm & n.exc. 12 Sqm complete all as specified and directed.
All as per item No. 78 above but Area exc. 12 Sqm & n.exc. 20 Sqm complete all as specified and directed.
All as per item No. 78 above but Area exc 20 Sqm & n.exc .26 Sqm complete all as specified and directed.
S/F in repairs mild steel worm wheel and gear wheel fitted to suspension shaft of the rolling shutter and connecting rod respectivly (excluding suspension shaft and connecting rod) complete all as specified and directed.
S/F in repairs Bevel gear with handle fitted to connecting rod (excluding connecting rod) complete all as specified and directed.
S/F in repairs 25mm dia.connecting rod fitted to gear wheel and bevel gear complete all as specified and directed.
S/F in repairs mild steel lath section in single piece 1.20mm thick with inter locking curls at both edges complete all as specified and directed.
All as per item No.86 above but 0.9mm thick complete all as specified and directed.
S/F in repairs Mild steel clips riveted at either ends and fitted on ends of lath section complete all as specified and directed.
S/F in repairs Mild steel cranked handle suitable for gear operated type rolling shutter complete all as specified and directed.
S/F in repairs Cast iron ball bearing for rolling shutter complete all as specified and directed.
S/F Mild steel sheet 1.00mm thick as hood cover of any shape with flat iron stiffners at both edges and fixed to the bracket plate complete all as specified and directed.
S/F in repairs safty lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.
M & L for steel rolling shutter 1.25mm thickness of lath without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position complete push pull or manual type complete all as specified and directed.
M&L for preparation of new steel surfaces of any description exceeding 10 cm width or girth and applying two coats of aluminium paint on rolling shutter, etc. complete all as specified and directed.
M/S MAA TARA TREATMENT PROJECT
murty construction company
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .