Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹28.5 L
Closing Date
29 May 2026, 8:30 pmClosed
Karnataka Power Transmission Corporation Limited
Rajkumar S Biradar
Design, Manufacture, Testing and supply of 180 Kms of 11kV UG Cables of various sizes viz, 1CX1000sqmm, 3CX400Sqmm, 3CX240Sqmm & 3CX95sqmm required for all Operation/Transmission Zones of KPTCL conforming to KPTCL technical specification, F.O.R.D at Store/Site basis, including insurance, transportation and unloading
KPTCL/2026-27/IND0298
KPTCL/2026-27/IND0298
Open
Two Tender Document System(Two Cover)
KPTCL CGM Tech Corporate Office Bengaluru
25 documents required · 24 mandatory · 1 optional
The Tenderer shall be a Manufacturer of Underground Cable (UG cable) and should have a minimum experience of 5 (Five) years in designing, manufacturing, testing and supply of 11kV or higher voltage class UG Cable as on the date of bid submission.The supporting documents such as Purchase Order/ order completion certificates/performance certificates demonstrating experience of minimum 5 years as Manufacturer of material/equipment specified in the tender, shall be uploaded.
The Tenderer should have manufactured and supplied at least 50% of tendered quantity i.e., at least 90kms of 11kV or higher voltage class UG Cable (25% in respect of Micro & Small Enterprises ie., 45Kms in respect of Micro & Small Enterprises) to State/Central owned Transmission Utilities/Generation Utilities. Micro & Small Enterprises shall upload valid MSME (UDYAM) registration certificate obtained from the competent authority certifying that tenderer is a Micro and Small Enterprises.Tenderers shall have to upload the supporting Documents such as Purchase order copies, order completion certificates/ performance certificates issued by State/Central owned Transmission Utilities/Generation Utilities.
The Tenderer shall upload the performance certificates for at least 50% of tendered quantity i.e., at least 90Kms of 11kV or higher voltage class UG Cable (25% in respect of Micro & Small Enterprises ie., 45Kms in respect of Micro & Small Enterprises). The performance certificate shall pertain only to the 11kV or higher voltage class UG Cable commissioned in State/Central owned Transmission Utilities/ Generation Utilities.The issuing officer of performance certificates shall not be below the rank of Executive Engineer or equivalent Division head. The performance certificate shall indicate all necessary details such as size, make, name of the substation where it is installed, date of commissioning etc., in order to show that the above 11kV or higher voltage class UG Cables were in successful operation for at least a minimum period of two years as on the date of bid submission. Tenderers shall have to upload the relevant performance certificates.
The Performance of UG cables supplied by the Tenderer in the past would also be reckoned for considering the offers. Details of performance of past supplies of Tenderer to KPTCL (either through direct orders or through EPC Contractors) shall be uploaded.
The Average Annual Financial Turnover of the Tenderer for best three years out of last preceding five financial years (2020-21, 2021-22, 2022-23, 2023-24 and 2024-25) should not be less than the Amount Put to Tender ie., Rs. 2847.57 Lakh. However, it shall be Rs.1423.78Lakh in respect of Micro & Small Enterprises. The Tenderer shall upload audited annual financial statements such as Profit & Loss statements, Balance sheets for the above period duly certified by a Chartered Accountant, Annual Turnover certficate indicating the split details of financial turnovet & GST certificated by CA in the presecribed format (Annexure-A).Micro & Small Enterprises shall upload valid MSME (UDYAM) registration certificate obtained from the competent authority certifying that tenderer is a Micro and Small Enterprises
The Liquid Assets as on last date of previous month of tender inviting date or at a later date before submission of the bid consisting of Cash at Bank Plus Term Deposits plus availability of fund based credit facilities in any Nationalized/scheduled Bank shall not be less than 25% of the amount put to tender ie., Rs.711.89Lakh. However, it shall be Rs. Rs.355.95Lakh in respect of Micro & Small Enterprises.The cash at bank, term deposits and availability of fund-based credit facilities shall be supported by a certificate issued by Nationalized/ Scheduled Bank and same shall be uploaded.If the Tenderer has banking with more than one Bank, then the available liquid assets mentioned above on a particular date i.e., as on last date of previous month of tender inviting date or any date before submission of tender shall be the same date for all the banks.In case of Fund based credit facility, the certificate issued by the Nationalized/ Scheduled Bank duly mentioning sanctioned limits, funds utilized so far and balance available as on last date of previous month of tender inviting date or at a later date, before submission of the bid shall be uploaded.
The Tenderer shall be individual Proprietorship firm or partnership firm or Company Registered under Companies Act 1956/2013.Tenderer shall upload Registration certificate/SSI Certificate/Udyam certificate (MSME)/Partnership deed/license issued by the Commerce & Industries department or any other Government statutory Authority shall be uploaded. For Proprietorship firm, PAN and GST registration certificate shall be uploaded.
The Tenderer should have Goods and Service Tax (GST) registration and shall upload the necessary supporting document to establish compliance for having GST registration
The Tenderer shall upload Guaranteed Technical Particulars of each size of 11kV UG cables of various sizes viz, 1CX1000sqmm, 3CX400Sqmm, 3CX240Sqmm & 3CX95sqmm of the present enquiry in the prescribed format uploaded in Techno-commercial sheet, failing which the bid document is liable for rejection.Guaranteed Technical Particulars of 11kV UG cables of various sizes viz, 1CX1000sqmm, 3CX400Sqmm, 3CX240Sqmm & 3CX95sqmm shall be uploaded.
The Tenderer shall upload Type Test reports and additional test reports not older than Five years as on the date of bid submission for having conducted successful type tests as specified in tender technical specifications, on 11kV UG cables of sizes tendered 1CX1000sqmm, 3CX400sqmm, 3CX240sqmm and 3CX95sqmm as per the relevant IS/IEC standards at designated laboratories.
Note:1)In case, type test reports& additional test reports of 11kV UG cables of sizes higher than those sizes specified in the tender are uploaded, the same are acceptable for technical evaluation, subject to the condition that the Tenderer shall submit the type test reports and additional test reports of 11kV UG cables of all the sizes tendered at the time of inspection of UG cables by KPTCL officers, without affecting the Delivery Schedule and at no extra cost to KPTCL. Tenderer shall upload an undertaking in this regard.2)In case, a few of the type test reports/additional test reports specified in KPTCL Technical specification are not available, the same are acceptable for tender evaluation purpose, subject to the condition that, Tenderer shall submit all the type test reports & additional test reports specified in KPTCL Technical specification for having conducted all type tests and additional tests on UG cables of sizes tendered at designated laboratories mentioned above at the time of inspection of UG cables by KPTCL officers, without affecting the Delivery Schedule and at no extra cost to KPTCL. Tenderer shall upload an undertaking in this regard.3)In the event of an award, the delay in supplies of UG cables due to the delay in submission of all type test reports /additional test reports as per Sl. No. (1) & (2) will be to the account of Successful Tenderer and KPTCL shall have no liability whatsoever in this regard.
Any Tenderer/ Bidder from a country which shares a land with India will be eligible to bid in this tender only if the Tenderer is registered with the Competent Authority. A certificate for having read the clauses specified in Section XVI of the tender documents under the heading Eligibility clauses in respect of restrictions on procurement from a Tenderer/ Bidder of a country which shares a land border with India shall be uploaded by the Tenderer/ Bidder in the following format i)I have read the clause regarding restrictions on procurement from a Tenderer/Bidder of a country which shares a land border with India, I certify that this Tenderer/Bidder is not from such a country or, if from such a country, has been registered with the Competent Authority. I hereby certify that this Tenderer/ Bidder, fulfills all requirements in this regard and is eligible to be considered. Where applicable, evidence of valid registration by the Competent Authority shall be attached/uploaded.ii) I have read the clause regarding restrictions on procurement from a Tenderer/vendor having Transfer of Technology (ToT) arrangement. I certify that this Tenderer/vendor does not have any ToT arrangement requiring registration with the competent authority OR I have read the clause regarding restrictions on procurement from a Tenderer/Bidder/ vendor having Transfer of Technology (ToT) arrangement. I certify that this Tenderer/ Bidder/ vendor has valid registration to participate in this procurement. Self declaration in the prescribed format shall be uploaded
The Tenderer should not have been DEFAULTED in supplies against Purchase Orders placed by any State/Central Generating/ Transmission Utility/ESCOMs/Distribution companies or any Government Electrical Utilities/ PSUs. Self-declaration in the prescribed format shall be uploaded
The Tenderer should not be under order of debarment/Blacklisting from participating in a Tender by any State/Central Generating/ Transmission Utility/ESCOMs/Distribution companies or any Government Electrical Utilities/ PSUs, as on the last date of submission of bids.Self-declaration in the prescribed format shall be uploaded
The Tenderer should provide detailed information on any litigation or arbitration arising out of contracts completed or under execution by it over the preceding five years, A consistent history of awards involving litigation against the Tenderer or any partner may result in rejection of Bid.Self-declaration in this regard shall be uploaded
The Tenderer shall upload the Power of Attorney in the prescribed format on Rs.500/- non-judicial stamp paper. Further Power of Attorney shall be sent in original to Chief General Manager (Tech), KPTCL, Bangalore so as to reach after the last submission date & on or before the date & time of opening Techno commercial Bids. Note: a) The Bid Enquiry No. shall be clearly and legibly indicated.b) The offer of the Tenderer shall be rejected in the following cases: i.If the Power of Attorney is furnished on the stamp paper of value below Rs 500/ii.In case the date of execution of Power of Attorney is not mentioned.iii.In case the date of execution of Power of Attorney is prior to the date of purchase of Stamp paper. iv.In case the Power of Attorney is submitted without the signature of the Power of Attorney holder and signature of the person who has authorized the Power of Attorney holder.v.In case tender documents including technocommercial sheets are signed by the different person other than the Attorney holder or the person who has authorized the Attorney holder
The offer of the Tenderer taking deviations in following clauses will be summarily rejected. Validity of offer, Earnest Money Deposit/ Bid Security, Performance Security/Contract Performance Guarantee,Payment terms. Guarantee/Warrantee, Liquidated Damages/Penalty for delay in supplies,Stipulated Delivery Schedule, Price Basis, Type Tests, Change in offered quantity against tendered quantity
Any other relavant documents/undertakings/certificates
₹500
₹28.5 L
28 Apr 2026
28 Apr 2026
30 May 2026
12 May 2026
12 May 2026
KARNATAKA POWER TRANSMISSION CORPORATION LIMITED
Schedule I: Guaranteed Technical Particulars (TECHNICAL DATA REQUIREMENTS )
Tender Enquiry NO. KPTCL/2026-27/IND0298
Tender for Design, Manufacture, Testing and supply of 180 Kms of 11kV UG Cables of various sizes viz, 1CX1000sqmm, 3CX400Sqmm, 3CX240Sqmm & 3CX95sqmm required for all Operation (transmission) zones of KPTCL conforming to KPTCL technical specification, F.O.R.D at Store/Site basis, including insurance, transportation and unloading
Guaranteed Technical Particulars (TECHNICAL DATA REQUIREMENTS)
Please fill only in the light blue coloured cells.
GUARANTEED TECHNICAL PARTICULARS FOR 11kV UG CABLE
(Bidder should indicate the guaranteed technical date of all equipments/materials for each type of rating separately)
SL. No PARTICULARS
1 Cables 1CX1000sqmm 3CX400Sqmm 3CX240Sqmm 3CX95sqmm
a) Name of manufacturer
b) Place of manufacture
2 Cable Type (A2XWY)
3 Applicable specification & standards voltage Grade (IS: 7098 (Part-2)/11kV)
4 Suitable for effective Earth/Unearth system
5 Permissible voltage & frequency variation for satisfactory operation
6 Continuous current for standard condition as per IS:
a) In air (45⁰ C)
b) In Ground (30⁰ C)
a) Material Aluminium (H2/H4 Grade)
b) Shape of conductor Strandard compacted circular
c) Nominal cross sectional area
d) Number of wire: (min)
e) Diameter of Wire : mm before compacting & strand Diameter
f) Maximum DC resistance of the conductor at 20⁰ C
8 Conductor Screening
a) Material Extruded Semiconducting compound
b) Process (Triple Extrusion)
c) Thickness (Min)
d) Continuous working temp (90 ⁰ C)
e) Max allowable temp at termination of short circuit (250 ⁰ C)
a) Material (XLPE)
b) Thickness of Insulation (Nom) (mm)
i) Between Cores (mm)
ii) Between Cores & Inner Sheath (mm)
c) Minimum thickness of insulation at any one point (mm)
d) Extrusion Type (Extruded)
e) Specific insulation resistance at 90⁰ C
10 Insulation Screening:
a) Material (Extruded semi conducting compond)
b) Min. Thickness of extruded semi conducting layer
c) Metallic Part: (Material)
d) Size of copper Tape
e) Whether over lapping provided
f) Short Circuit rating in 1 sec.
11 Inner Sheath
a) Material (PVC -ST2)
b) Extrusion Type (Extruded)
c) Thickness (Min)
d) Nominal Dia over Inner Sheath
a) Material Galvanised Steel for 3 core cable/Aluminium wire for 1 core cable.
b) Type of armouring
c) Nominal Dimension of Armour wire
d) Minimum Number of Armour wire
e) Whether Galvanised
f) Mass of Zinc coating
g) Nominal Dia over Armouring
h) Short Circuit rating in 1 sec
13 Outer Sheath
a) Material Extruded PVC Compound Type ST-2
b) Extrution type (Extruded)
c) Min. thickness of sheath
d) Nominal Overall diameter of cable
e) Colour (Black)
14 Short circuit withstand capacity
a) Short Circuit withstand capacity
b) Duration of short circuit (Sec)
15 AC resistance per core at operating temperature
16 Reactance Ohm/Km
17 Capicitance per core
18 Allowable maximum conductor temperature when carrying current
19 Insulation resistance at 27⁰ C (Volume resistivity)
20 Loss tangent
21 Maximum cable charging current at normal operating voltage (A/Km)
22 FRLSH Properties:
a. Min. Oxygen Index.
b. Min. Temperature Index.
c. Max. Halogen Acid gas generation.
d. Max. smoke density rating.
e. Max. light transmittance.
23 Recommended Minimum bending radius.(mm)
24 Safe pulling force.(Kg)
25 Cable weight (Kg/Km)
26 Length of cable per drum (Mtrs)
Additional data
27 Core identification Application of coloured stripes Red, Yellow & Blue for 3 core cable.
28 Standard Packing Length and Tolerance(Mtrs)
29 Scheme of identification of the cable manufacturer’s name or trade mark, voltage grade, year of manufacture and the letters “KPTCL". The identification shall repeat every 1000 mm along the length of the cable.
Place Designation
Name of the Company
KARNATAKA POWER TRANSMISSION CORPORATION LIMITED
SCHEDULE- II TECHNICAL DEVIATION
Tender for Design, Manufacture, Testing and supply of 180 Kms of 11kV UG Cables of various sizes viz, 1CX1000sqmm, 3CX400Sqmm, 3CX240Sqmm & 3CX95sqmm required for all Operation (transmission) zones of KPTCL conforming to KPTCL technical specification, F.O.R.D at Store/Site basis, including insurance, transportation and unloading
Tender Enquiry NO. KPTCL/2026-27/IND0298
Please key in the Sl.No., Volume , Section , Clause , Desc as given in Booklet and finally your Statement of Deviation/Variations.
This Sheet would be opened at the Techno-Commercial Opening.
For any further assistance for submitting your bids please call up KPTCL office. Please fill only in the blue coloured cells.
Please don’t insert your Bid values here or else your bid will not be considered for evaluation.
We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)
We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)
We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)
If you are not deviating from any of the clauses mentioned please key in as 'NO DEVIATION' in the space provided.
TO, THE CHIEF GENERAL MANAGER(TECH), KPTCL,KAVERI BHAVAN, BANGALORE-560009
I have read each of the Clauses mentioned in NIT, INVITATION FOR TENDERS, INSTRUCTION TO TENDERERS , GENERAL CONDITIONS OF CONTRACT, SPECIAL CONDITIONS OF CONTRACT, QUALIFICATION CRITERIA, SCHEDULE OF REQUIREMENTS, TECHNICAL SPECIFICATIONS with respect to Tender Enquiry No: KPTCL/2025-26/IND0298 for Tender for Design, Manufacture, Testing and supply of 180 Kms of 11kV UG Cables of various sizes viz, 1CX1000sqmm, 3CX400Sqmm, 3CX240Sqmm & 3CX95sqmm required for all Operation (transmission) zones of KPTCL conforming to KPTCL technical specification, F.O.R.D at Store/Site basis, including insurance, transportation and unloading
The following are the Technical Deviations and Variations from and exceptions to the Specifications and documents of Tender Enquiry No: KPTCL/2025-26/IND0298 for Tender for Design, Manufacture, Testing and supply of 180 Kms of 11kV UG Cables of various sizes viz, 1CX1000sqmm, 3CX400Sqmm, 3CX240Sqmm & 3CX95sqmm required for all Operation (transmission) zones of KPTCL conforming to KPTCL technical specification, F.O.R.D at Store/Site basis, including insurance, transportation and unloading. These deviations and variations are exhaustive.Except these deviations and variations, the material shall be supplied as per specification and documents.
Sl. No. SECTION CLAUSE NO. DESC. AS PER SPECIFICATION STATEMENT OF DEVIATIONS/VARIATIONS
Note : Deviations specified elsewhere in the specification will not be considered.
Date Name of the Firm, Address & GSTIN Number
KARNATAKA POWER TRANSMISSION CORPORATION LIMITED
SCHEDULE- III COMMERCIAL DEVIATION
Tender Enquiry NO. KPTCL/2026-27/IND0298
Tender for Design, Manufacture, Testing and supply of 180 Kms of 11kV UG Cables of various sizes viz, 1CX1000sqmm, 3CX400Sqmm, 3CX240Sqmm & 3CX95sqmm required for all Operation (transmission) zones of KPTCL conforming to KPTCL technical specification, F.O.R.D at Store/Site basis, including insurance, transportation and unloading
Please fill Only in the Light Blue Couloured Box
Please key in the SlNo., Volume , Section , Clause , Desc as given in Booklet and finally your Statement of Deviation/Variations.
This Sheet would be opened at the Techno-Commercial Opening.
For any further assistance for submitting your bids please call up KPTCL Office.
We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)
We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)
We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)
If you are not deviating from any of the clauses mentioned please key in as 'NO DEVIATION' in the space provided.
TO, THE CHIEF GENERAL MANAGER(TECH), KPTCL,KAVERI BHAVAN, BANGALORE-560009
I have read each of the Clauses mentioned in NIT, INVITATION FOR TENDERS, INSTRUCTION TO TENDERERS , GENERAL CONDITIONS OF CONTRACT, SPECIAL CONDITIONS OF CONTRACT, QUALIFICATION CRITERIA, SCHEDULE OF REQUIREMENTS with respect to Tender Enquiry No: KPTCL/2025-26/IND0298 for TTender for Design, Manufacture, Testing and supply of 180 Kms of 11kV UG Cables of various sizes viz, 1CX1000sqmm, 3CX400Sqmm, 3CX240Sqmm & 3CX95sqmm required for all Operation (transmission) zones of KPTCL conforming to KPTCL technical specification, F.O.R.D at Store/Site basis, including insurance, transportation and unloading
The following are the Commercial Deviations and Variations from and exceptions to the Tender documents of Tender Enquiry No: KPTCL/2025-26/IND0298 for Tender for Design, Manufacture, Testing and supply of 180 Kms of 11kV UG Cables of various sizes viz, 1CX1000sqmm, 3CX400Sqmm, 3CX240Sqmm & 3CX95sqmm required for all Operation (transmission) zones of KPTCL conforming to KPTCL technical specification, F.O.R.D at Store/Site basis, including insurance, transportation and unloading.
SlNO. SECTION CLAUSE NO. DESC. AS PER SPECIFICATION STATEMENT OF DEVIATIONS/ VARIATIONS
Note : Deviations specified elsewhere in the specification will not be considered.
Date Name of the Firm, Address & GSTIN Number
KARNATAKA POWER TRANSMISSION CORPORATION LIMITED
SCHEDULE- IV QUALIFYING REQUIREMENT DATA
A) Details to demonstrate Manufacturing experience of 5 years
Tender Enquiry NO. KPTCL/2026-27/IND0298
Tender for Design, Manufacture, Testing and supply of 180 Kms of 11kV UG Cables of various sizes viz, 1CX1000sqmm, 3CX400Sqmm, 3CX240Sqmm & 3CX95sqmm required for all Operation (transmission) zones of KPTCL conforming to KPTCL technical specification, F.O.R.D at Store/Site basis, including insurance, transportation and unloading
SHEET FOR TECHNO-COMMERCIAL OPENING
Please don’t insert your Bid values here or else your bid will not be considered for evaluation. Please fill only in blue coloured cells.
We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)
We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)
We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)
Following (mentioned below) is the list of earlier orders to demonstrate Manufacturing experience of 5 years Complete in all respects executed by us,details of which are being furnished by us in the support of qualifying requirements of Tender Enquiry No. KPTCL/2026-27/IND0298
I) Details to demonstrate Manufacturing experience of 5 years
NOTE: Supporting documents to be uploaded
Sl. No. Name of the Manufacturer Name of the equipment Qty. Purchaser as specified in QR P.O Ref and Date of Order Date of Supply Date of commissioning Remarks
Date Name of the Firm, Address & GSTIN Number
KARNATAKA POWER TRANSMISSION CORPORATION LIMITED
SCHEDULE- IV QUALIFYING REQUIREMENT DATA
(B) Details to demonstrate past supplies
Tender Enquiry NO. KPTCL/2026-27/IND0298
Tender for Design, Manufacture, Testing and supply of 180 Kms of 11kV UG Cables of various sizes viz, 1CX1000sqmm, 3CX400Sqmm, 3CX240Sqmm & 3CX95sqmm required for all Operation (transmission) zones of KPTCL conforming to KPTCL technical specification, F.O.R.D at Store/Site basis, including insurance, transportation and unloading
We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)
We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)
We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)
Following (mentioned below) is the list of earlier orders to demonstrate past supply details Complete in all respects executed by us,details of which are being furnished by us in the support of qualifying requirements of Tender Enquiry No. KPTCL/2026-27/IND0298
NOTE: Supporting documents to be uploaded
Orders placed by (Full address of Purchaser) Order No and Date Description of Goods ordered Quantity of Goods ordered Value of Order Date of Completion of Delivery Remarks indicating reasons for late delivery, Has the goods/ equipment been satisfactorily functioning. (Attach a Certificate from the Purchaser)
As per contract Actual
Date Name of the Tenderer, Address & GSTIN Number
KARNATAKA POWER TRANSMISSION CORPORATION LIMITED
SCHEDULE- IV QUALIFYING REQUIREMENT DATA
(C) Details to demonstrate satisfactory Performance of equipment for 2 years
Tender Enquiry NO. KPTCL/2026-27/IND0298
Tender for Design, Manufacture, Testing and supply of 180 Kms of 11kV UG Cables of various sizes viz, 1CX1000sqmm, 3CX400Sqmm, 3CX240Sqmm & 3CX95sqmm required for all Operation (transmission) zones of KPTCL conforming to KPTCL technical specification, F.O.R.D at Store/Site basis, including insurance, transportation and unloading
We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)
We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)
We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)
Following (mentioned below) is the list of earlier orders to demonstrate satisfactory performance of the equipment for 2 years Complete in all respects executed by us,details of which are being furnished by us in the support of qualifying requirements of Tender Enquiry No. KPTCL/2026-27/IND0298
NOTE: Supporting documents to be uploaded
Orders placed by (Full address of Purchaser) Order No and Date Description of Goods ordered Quantity of Goods ordered Value of Order Date of Completion of Delivery Remarks indicating reasons for late delivery, Has the goods/ equipment been satisfactorily functioning. (Attach a Certificate from the Purchaser) Period in years of satisfactory functioning of Goods from the date of commissioning
As per contract Actual
Date Name of the Tenderer, Address & GSTIN Number
KARNATAKA POWER TRANSMISSION CORPORATION LIMITED
SCHEDULE- IV QUALIFYING REQUIREMENT DATA
(D) Details of Type test & additional type test reports
Tender Enquiry NO. KPTCL/2026-27/IND0298
Tender for Design, Manufacture, Testing and supply of 180 Kms of 11kV UG Cables of various sizes viz, 1CX1000sqmm, 3CX400Sqmm, 3CX240Sqmm & 3CX95sqmm required for all Operation (transmission) zones of KPTCL conforming to KPTCL technical specification, F.O.R.D at Store/Site basis, including insurance, transportation and unloading
We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)
We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)
We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)
Following (mentioned below) is the list of type test & additional type test reports of the equipment, which are being furnished by us in the support of qualifying requirements of Tender Enquiry No. KPTCL/2026-27/IND0298
NOTE: Supporting documents to be uploaded
Name of the equipment Name of the Laboratory at which Type tests are conducted Date of Test report Name of the Test Test result Remarks if any
Date Name of the Tenderer, Address & GSTIN Number
SCHEDULE V ASSESSEMENT OF FINANCIAL CAPABILITY OF THE BIDDER
Tender Enquiry NO. KPTCL/2026-27/IND0298
Tender for Design, Manufacture, Testing and supply of 180 Kms of 11kV UG Cables of various sizes viz, 1CX1000sqmm, 3CX400Sqmm, 3CX240Sqmm & 3CX95sqmm required for all Operation (transmission) zones of KPTCL conforming to KPTCL technical specification, F.O.R.D at Store/Site basis, including insurance, transportation and unloading
1 Name of the Tenderer
3 Details of Material to be supplied
4 Quantity tendered
Sl.No. Particulars
1 Annual Turnover for the last Five years Sl No. Year
2 Liquid Assets as per Financial Criteria
3 Capital assets for the last Five years
4 Current Ratio for the last year
5 Current Assets
6 Current Liabilities
7 Documents to be enclosed. 1 Audited Balance sheet for the last Five years
2 Banker's /Financial Institutions endorsement for limit of Financial leading.
Date Name of the Firm, Address & GSTIN Number
Place Desgination
KARNATAKA POWER TRANSMISSION CORPORATION LIMITED
Tender Enquiry NO. KPTCL/2026-27/IND0298
Tender for Design, Manufacture, Testing and supply of 180 Kms of 11kV UG Cables of various sizes viz, 1CX1000sqmm, 3CX400Sqmm, 3CX240Sqmm & 3CX95sqmm required for all Operation (transmission) zones of KPTCL conforming to KPTCL technical specification, F.O.R.D at Store/Site basis, including insurance, transportation and unloading
Sl. No. Terms & Conditions As per tender As per Bidder
1 Name of the Firm To be furnished by the bidder
2 Place of Manufacture To be furnished by the bidder
3 Scope of the proposal Refer:SECTION II: A of Introduction of ITT, Scope of Tender
4 Power of Auttorney for signing the Documents To be Uploaded by the bidder
5 Bid Form To be uploaded
6 Bid Security/EMD As per Clause No 12 of NIT
7 Bid Validity 180 days from the last date of submission of bids
8 Manufacturer /Supplier As per SECTION VII : QUALIFICATION CRITERIA
9 Experience SECTION VII : QUALIFICATION CRITERIA
10 Quantity Tendered / offered SECTION V: SCHEDULE OF REQUIREMENTS AND DESIRED DELIVERIES
11 Prices as per tender condition
12 Taxes & Levies as per tender condition
13 Payment Terms As per Clause 05 of SCC
14 Warranty/Guarantee As per Section III of GCC Cl.No.14
15 Penalty for delay in supplies As per Section III of GCC Cl.No.22
16 Delivery/Completion Schedule As per Section V of Schedule of requirement & desired deliveries
17 Termination of contract As per Section III of GCC Clause No.23
18 Performance Security As per Section III of GCC Cl.No.6
19 Guaranteed Technical Particulars To be furnished by the bidder as per Technical Specification
Date Name of the Firm, Address & GSTIN Number
Place Desgination
KARNATAKA POWER TRANSMISSION CORPORATION LIMITED
Tender Enquiry NO. KPTCL/2026-27/IND0298
Tender for Design, Manufacture, Testing and supply of 180 Kms of 11kV UG Cables of various sizes viz, 1CX1000sqmm, 3CX400Sqmm, 3CX240Sqmm & 3CX95sqmm required for all Operation (transmission) zones of KPTCL conforming to KPTCL technical specification, F.O.R.D at Store/Site basis, including insurance, transportation and unloading
CHECK LIST FOR QUALIFYING REQUIREMENT
Please make sure that the following supporting document are uploaded without which the tender is liable for rejection.
Sl. No. Particular Tenderer’s Compliance
I Qualification Criteria stipulated in Section-VII Whether Documentary supports enclosed or not Indicate Yes/NO Type of documents uploaded
1 QR regarding status of Tenderer/type of company
For details, refer Section-VII
2 QR regarding GST registration
For details, refer Section-VII
A Technical Criteria: The Tenderer should establish their experience (the “Technical Capacity”) as set out below:
3 QR regarding manufacturing experience of 5 years.
For details, refer Section-VII
4 QR regarding past supply details
For details, refer Section-VII
5 QR regarding past performance of equipment
For details, refer Section-VII
6 QR regarding Guaranteed Technical Particulars of 11kV UG Cables of various sizes viz, 1CX1000sqmm, 3CX400Sqmm, 3CX240Sqmm & 3CX95sqmm in the prescribed format to be uploaded in Techno-commercial sheet.
For details, refer Section-VII
7 QR regarding type test reports.
Type test reports and additional type test reports.
For details, refer Section-VII
B Financial Criteria: The Tenderer should have the following financial capacity (the “Financial Capacity”).
8 QR regarding Annual Financial Turnover of the Tenderer, balance sheets, profit And loss statements, Annual turn over certificate with split details of financial turnover & GST in the prescribed format (Annexure -A)
For details, refer Section-VII
9 QR regarding Liquid Assets
For details, refer Section-VII
C General Criteria
10 Self-declaration in the prescribed format as per Section-XVI regarding “Eligibility clauses in respect of restrictions on procurement from a Tenderer/Bidder of a country which shares a land border with India”.
For details, refer Section-VII
11 Details of performance of past supplies of Tenderer
For details, refer Section-VII
12 Self-declaration in the prescribed format regarding DEFAULTED in supplies.
For details, refer Section-VII
13 Self-declaration in the prescribed format regarding debarment/Blacklisting.
For details, refer Section-VII
14 Litigation History: Self -declaration in this regard.
For details, refer Section-VII
15 Power of Attorney in the prescribed format Section VIII (Appendix C) on Rs.500/- non-judicial stamp paper and shall be sent in original to Chief General Manager (Tech), KPTCL, Bangalore so as to reach after the last submission date & on or before the date & time of opening Techno commercial Bids.
For details, refer Section-VII
16 No deviation certificate.
For details, refer Section-VII
II Other Details Whether uploaded or not Type of documents uploaded
1 Tender Form in the format prescribed at Section-VIII (Appendix A).
2 Details of Tenderer in the format prescribed at Section-VIII (Appendix B) along with supporting documents;
3 Power of Attorney for Signing of Proposal in the format prescribed at Section VIII (Appendix C)
4 Checklist of documents uploaded by the Tenderer along with the Tender prescribed at Section VIII (Appendix D)
5 Earnest Money Deposit in the manner and form at Section-IX as specified in Clause 13 of ITT
6 Technical Capacity of the Tenderer in the format prescribed at Section-XII, along with supporting documents
7 Equipment And Quality Control Employed By the Manufacturer in the format prescribed at Section-XIV
8 Techno–Commercial sheets duly filled in, Data requirement sheets/GTP.
9 All other relevant documents/ undertakings/declarations/details specified in the Tender document.
Date Name of the Tenderer, Address & GSTIN Number
Place Desgination
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Undertaking default and blacklist.pdf
Others - undertakings • 0.19 MB
Section-6 HT UG cables Technical specifications.pdf
Others - Technical Specifications • 0.72 MB
Annexure A-Format for split details of turnover and GST.pdf
Others - Annexure A-Format for split details of turnover and GST • 0.20 MB
Section-1 to 16.zip
Tender Document • 2.54 MB
price variation circular.pdf
Others - Price variation Circular • 0.09 MB
Technocommercial sheets.xlsx
Techno-Commercial Worksheet • 0.09 MB
IND0298- NIT.pdf
Others - NIT • 0.86 MB
advisory note_298.pdf
Others - Advisory note • 0.08 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .