CERTAIN REPAIRS TO COMPOUND WALL GATE/ GRILL GRATING AND CHAIN LINK FENCING DRAIN, PATH AND CERTAIN PETTY REPAIRS IN MD ACCN AT TRV, MT, CSD COMPLEX, SPECTRUM AN INLIVING SAILOR ACCN OF COAST GUARD UNDER AGE B/R-II AT GE HADDO PORT BLAIR

Amount

Excavating in post holes (or similar holes) each not exceeding 0.5 Cum and getting out in hard/dense soil complete all as specified and as directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for as in manhole/drain cover slabs or similar works (reinforcement cut as required to facilitate demolition) complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings not exc 15cm thick (below/above ground level) complete all as specified and as directed.

M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

M&L for PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

M&L for hardcore using broken stone or boulders of gauge exceeding 63mm and not exceeding 100 mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ complete all as specified and as directed.

M&L for finishing surface of concrete hardstanding/ path/pavements, by brooming complete all as specified and as directed.

M&L for plain cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in mud stops, kerbs and the like rounded or chambered on edges complete all as specified and as directed.

M&L for plain cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in Surface channel and drain etc and the like rounded or chambered on edges complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc., complete all as specified and as directed.

M&L for 75mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed.

M&L for 75mm thick PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in top layers to hard standing, pavings, etc finished with even and fair with using extra cement etc complete all as specified and as directed.

M&L for pre-cast cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in cover slabs of drains / manholes, landing and setting in cement mortar (1:6) complete all as specified and as directed.

M&L for plain cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs including weathering, slightly rounded or chamfered angles and throating including necessary form work, exposed surfaces of concrete finished even and smooth without using extra cement complete all as specified and as directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Demolition of PCC block masonry, built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L for pre-cast cement concrete block masonry with solid blocks made up of (1:3:6) type C1 (using 20mm graded stone aggregate), masonry exceeding 10cm in width and setting in cement mortar (1:6) complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water etc., and removal of debris to outside MD land complete all as specified and as directed.

M&L for rendering 15mm thick cement plaster in CM 1:4 with WPC on fair faces of brick work or concrete surfaces at any height with necessary scafoldings, finished even smooth without using extra cement etc complete all as specified and as directed.

M&L for rendering 10mm thick in CM (1:6) on fair faces of brick work or concrete, surfaces finished even and smooth complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls of any description and applying two coats of cement based paint over a coat of cement primer complete all as specified and as directed.

M&L for preparation of old plastered surfaces of walls and applying one coat of cement based paint after filling the cracks/holes with filler and levelling the undulations if any with cement putty complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls of any description and applying two coats of distemper oil emulsion over a coat of primer including one coat of wall care putty for smooth surface by grinding etc., complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of external walls of any description and applying two coats of weather proof antifungal (exterior grade) acrylic emulsion over a coat of primer from the same manufacturer complete all as specified and as directed. Make : Dulux Weather Shield Max or Apex Ultima from Asian Paints or Berger weather coat All guard

M&L complete removal of existing treatment on internal wall surfaces and applying two coat of distember oil emulsion over a coat of alkali resistant priming paint over a coat of 3mm thick wall care putty etc complete all as specified and as directed.

M&L for complete removal of existing treatment of old decorated exteral wall surface by scraping, washing, cleaning etc., and applying two coats of weather proof (exterior grade) acrylic emulsion paint with antifungal property over a coat of primer from the same manufacturer as that of paint including wall care putty after filling the cracks with filler complete all as specified and as directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons, risers of steps, skirting, dado etc., laid bedded and pointed in any mortar mortar complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for vitrified ceramic coloured tiles 10 mm thick (square/ rectangular) of approved shade, area of each tile not exceeding 0.36 Sqm as in floors etc., laid over and including 15mm thick screed bed in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for vitrified ceramic coloured tiles 10 mm thick (square/ rectangular) of approved shade, area of each tile not exceeding 0.36 Sqm as in skirting, dados and risers to steps etc., laid over and including 10mm thick screed bed in CM (1:3), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc, laid over and including 15mm thick screed bed in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors etc, laid over and including 15mm thick screed bed in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in skirting, dados and risers to steps etc., laid over and including 10mm thick screed bed in CM (1:3),, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for glazed ceramic designed coloured tiles in vertical surfaces using size of tiles 300x450x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with colour of tile with and including 10mm thick backing coat in CM (1:3), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for glossy finished chequered cement concrete tiles 30cm x 30cm x 25mm thick, made of grey cement and pigments, machine pressed as in flooring, set, jointed and pointed in neat cement slurry laid over and including 20mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L for 16 to 18mm thick granite slab (of approved shade), machine cut, as in floors, vertical surfaces, steps (treads/risers) and the like laid bedded over 15mm thick cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing and rounding (chamfering) the edges complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block, glossy finished, any shape and size conforming to IS 15658-2006 of 80 mm thickness, M-40 grade, made of grey cement and pigments, any pattern, laid in floors, laid dry complete all as specified and as directed.

M&L for sand (river sand) filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

Dismantling of wrought iron or mild steel work and structural steel work of any description ot otherwise provided for complete

M&L for mild steel angle iron posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

M&L for mild steel rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates etc., conforming to Fe-410-W (Grade E-250) Quality 'A' complete all as specified and as directed.

M&L for mild steel rolling shutters with thickness of laths 1.25mm, push pull or manual type with ball bearing, including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete all as specified and as directed.

S&F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete

M&L for mild steel framed work (ornamental and intricate design) as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-290 Gde E-165 complete all as specified and as directed.

M&L for mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars and similar work conforming to Fe-290 Grade E-165 complete all as specified and as directed.

M&L for mild steel galvanised PVC coated chain link fencing 50mm x 50mm, 3.15mm nominal dia of GI wire, 1.00mm thick PVC coating and incl fixing to any type of fencing posts with straining bolts, stiffner rods etc including provision of binding wire if required complete all as specified and as directed.

M&L for mild steel round bars 10 to 12mm dia as required, made to shape for securing chain link fencing etc, and similar works conforming to Fe-290 Gde E-165 and including preparation and applying two coats of synthetic enamel paint over a coat of red oxide primer before fixing etc complete all as specified and as directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt not exceeding 5 cm and dia of neck 16 to 20 mm complete all as specified and as directed.

M&L for preparation of new steel and iron surfaces of any description, not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint of first quality over a coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L for preparation of old steel and iron surfaces of any description, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

S&F in repiar, stainless steel hollow sections circular/square/rectangular in shape and any size and thickness, grade AISI-316 type (Austenitic anti-corrosive in nature) as in railings/grills/designer work including post top cap, bottom plate, cutting, bending, seamless welding and fixed in any location complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc., complete all as specified and as directed.

S&F pre-painted zinc coated aluminum sheet (Galvalume) GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including scaffolding for a height upto 12.0 metres complete all as specified and as directed. NOTES: The self tapping screw shall be of adequate length to drive into complete thickness of purlin/rafter etc., and shall be fixed using neoprene and EPDM washers. Penetration and laps in sheet shall be sealed by using proper sealant profile. HDPE fillers shall be provided wherever required to close voids between sheets, sheet & fasteners etc., as per SSR Part-I 2009 complete.

S&F pre-painted zinc coated aluminum sheet (Galvalume) GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/valley gutters, fixed with self tapping screws including scaffolding for a height upto 12.0 metres complete all as specified and as directed. NOTES: The self tapping screw shall be of adequate length to drive into complete thickness of purlin/rafter etc., and shall be fixed using neoprene and EPDM washers. Penetration and laps in sheet shall be sealed by using proper sealant profile. HDPE fillers shall be provided wherever required to close voids between sheets, sheet & fasteners etc., as per SSR Part-I 2009 complete.

S&F aluminum flat wind ties of any size and thickness fixed with self tapping screws for fixing roofing sheets complete all as specified and as directed. NOTES: The self tapping screw shall be of adequate length to drive into complete thickness of purlin/rafter etc., and shall be fixed using neoprene and EPDM washers.

Dismantling ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets and grid complete all as specified and as directed.

M&L for anodised aluminium powder coated snap grid frame work for ceiling 605mm x 605mm using aluminium anodised sections aluminium sections main tee 36.5x25x1.4mm, cross 23.5x26.4x1.4mm, angle 25x25x1.4mm including cutting, drilling jointing etc complete incl 4mm dia of GI hangers wire suspenders fixed with adjustable connectors and providing 6mm thick E-boards 605mm x 605mm size specified by Engr-in-Charge and making good etc complete all as specified and as directed.

M&L for seamless gypsum board false ceiling 12 mm thick including for any sunk or raised moulding with 25mm long self drilling/tapping screws having Philips head with joining compound and 48 mm wide fibre tape to provide seam less finish and including GI frame work of seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flange of 20mm and 30 mm, web of 27 mm, fixed to surrounding wall using nylon sleeves and screws at 450 mm c/c / intermediate channel 0.9 mm thick having two equal flanges of 15 mm suspended from soffit at approx 900 mm c/c with GI cleats and steel expansion fasteners with and including ceiling section (not exceeding 1.2 m length) of 0.55 mm thick having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting across the intermediate channel at 457 mm c/c including hangers 6 mm dia GI adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size, 60 mm long & expansion hold fasteners 12.5 mm dia, 40 mm long and finally applying two coats of oil bound distemper with roller finish over a coat of primer complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames), area exceeding 1.5 Sqm but not exceeding 4.0 Sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames), area not exceeding 1.5 Sqm each complete all as specified and as directed.

Taking down shutters, area exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and as directed.

Taking down aluminium window/ doors frames with shutter (without taking off shutters from the frames), area exceeding 1.5 Sqm but not exceeding 4.0 Sqm each complete all as specified and as directed.

Taking down aluminium window/ ventilators frames with shutter (without taking off shutters from the frames), area not exceeding 1.5 Sqm each complete all as specified and as directed.

S&F Second class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints including preservative treatment complete all as specified and as directed.

S&F 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), fixed to chowkats complete all as specified and as directed.

S&F in repairs to Aluminium composite panel sheet of 3.0mm thick with skin thickness of 0.25mm of aluminium on both sides, sandwiched by 2.5mm polyethylene core with PVDF coating of 30.0 micron fixed over frame of aluminium tabular section 50x25mm x 2.0mm thick, having panels not exc 1200x1200mm with necessary silicon filling, in approved pattern as in column, beam, wall at any height with necessary scafoldings etc complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed.

S&F flush shutters 35mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides incl 6mm wooden sipping around the edges of shutter complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube as per specification & drawing, fixed in opening complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded prelaminated PVC sheet on the front face & 2mm plain colour PVC sheet on back face as per specification & drawing fixed to door frame complete all as specified and as directed.

M&L in repairs to 18mm thick rubco huat rubwood in built up interior as in cupboards, shelves wall lining, boxes structure and incl all fitting items complete all as specified and as directed. After completing the carpentry works all the visible woods area will be sanding by No.60 and 80 Wood sanding paper, after that will be applying Sheenlac make Filler with mixing of NCD thinner (Sheenlac make), then pasting chock putty in the shabby/nailing area which will be sanding with No.120 sanding paper, after that will appying sealer of Sheenlac make and walnut colour stainer, then cutting with No.320 sand paper, after completing the above process will spray milamine polish of Berger/Sheenlac make then cutting with No.400 sanding paper. Finally will applying silicon make waxpol with soft Banyan cloth for better shining/finishing. Make of rubber wood member : RUBCO or equivalent

S&F 100mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-21 complete all as specified and as directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F 150mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F sliding door bolt, 300mm long, aluminium alloy, anodised, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

M&L for powder coated anodised aluminium partition, window and door/ventilator with frame and shutters fully or partly glazed, sliding/openable/fixed fully glazed and panels fixed with panels inserts 12 mm thick pre-laminated particle board/sheet glass including necessary jointing cleats, glazing clips, rubber beading, neoprene packing, anodised aluminium snap beading, screws, anodized aluminium fittings such as handles, aluminium butt hinges, aluminium tower bolts etc. The size of aluminium section shall be all as specified in relevant IS Code and SSR Part-I complete all as specified and as directed. NOTES: (i) Supply only floor spring, glass, Imax hinges, SS friction hinges, particle board, aluminium fly proof mesh will be measured and paid separately under relevant items of this BOQ. (ii) Weight of aluminium section only shall be accounted for the purpose of payment. However unit rate quoted shall be deemed to include for cost of rubber beading, neoprene packing, fittings such as handles, butt hinges, tower bolts, rollers for sliding windows, locking arrangement and fixing only of panel inserts of glass/ particle board/aluminium fly proof mesh etc. (iii) Weight of aluminium handle, butt hinges, tower bolts shall not be accounted for payment purpose.

S&F Powder coated Aluminium grill (minimum thickness of powder coating 50 micron) of approved design/pattern, with approved standared section and fixed to the existing window frame with CP brass/stainless steel screws @200 mm centre to centre, including cutting the grill to proper openinig size for fixing and operation of handles and fixing approved anodised aluminium standared section around the opening, all complete as per requirement and direction of Engineer-in-Charge.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

Supply only 4.0 mm thick figured glass, pin head type and glazing with aluminium glazing clips in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

SUPPLY ONLY 4.0 mm thick sheet glass, ordinary quality and glazing with aluminium glazing clips in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and as directed.

Supply only aluminium expanded metal fly proof mesh, cut to required size and shape, with 0.45mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed.

Supply and fix in repairs aluminium expanded metal fly proof mesh, cut to required size and shape, with 0.45mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed.

M&L for 18/19mm thick HDF boarding (fire & water proof) with decorative choice laminations in one side and balancing white laminations on other side, as in cup boards, cabinets, shelves and the like fixed independently or to existing frame work etc including taking down old boarding complete all as specified and as directed.

M&L for Auto hinges, stainless steel grade AISI-316 type (Austenitic anti-corrosive in nature) suitable for kitchen cabinets, Cupboards, shelves etc complete all as specified and as directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps 40mm (when open) complete all as specified and as directed.

S&F in repairs pillar tap, brass, 15mm dia long body, chromium plated, fancy type with capstan heads, screwed down, high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed. MAKE: PRAYAG Cat part No. PIS-50H or equivalent in PARRYWARE/ZOLOTO/JOHNSON

S&F in repairs bib tap, brass, 15mm dia, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified and as directed. MAKE: PRAYAG Cat part No. PIS-08H or equivalent in PARRYWARE/ ZOLOTO/ JOHNSON

S&F in repairs angular stop cock, 15mm dia, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, with long shank and cup (concealed type) screwed down, screwed both ends for iron pipe or for unions complete all as specified and as directed. MAKE: PRAYAG Cat part No. PIS-10H or equivalent in PARRYWARE/ ZOLOTO/ JOHNSON

S&F in repairs two way bib cock, 15mm dia, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, with long shank and cup (concealed type) screwed down, screwed both ends for iron pipe or for unions complete all as specified and as directed. MAKE: PRAYAG Cat part No. PIS-12H or equivalent in PARRYWARE/ ZOLOTO/ JOHNSON

S&F in repairs concealed stop cock, 15mm dia, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, with long shank and cup screwed down, screwed both ends for iron pipe or for unions, complete all as specified and as directed. MAKE: PRAYAG Cat part No. 7318 or equivalent in PARRYWARE/ ZOLOTO/ JOHNSON

S&F in repairs over head ABS shower rose with brass shower arm with or without swivel joints, brass, chromium plated, fixed to brass ferrule or pipe 15mm dia or bore, complete all as specified and as directed. MAKE: PRAYAG Cat part No. BS-76 or equivalent in PARRYWARE/ ZOLOTO/ JOHNSON

S&F in repairs brass chromium plated towel rail 20mm dia D type 60cm long between flanges etc complete all as specified and as directed.

S&F in repairs Plate rack of stainless steel using 0.65mm thick sheet of size 31"x36"x10" with steel shelves, partitions & hanging arrangements for utensils complete all as specified and as directed. MAKE: PRAYAG Cat part No. P- 448 or equivalent in JAQUAR/PARRYWARE

S&F in repairs Plate rack of stainless steel using 0.65mm thick sheet of size 31"x24"x10" with steel shelves, partitions & hanging arrangements for utensils complete all as specified and as directed. MAKE: PRAYAG Cat part No. P-440 or equivalent in JAQUAR/PARRYWARE

S&F in repairs corner glass self assembly size 300mm with chromium plated bracket guard and railing fixed in repairs complete all as specified and as directed. MAKE: PRAYAG Cat part No. BEA-44 or equivalent in JAQUAR/PARRYWARE

Taking up or down 20mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 25mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

S&F 20mm bore unplasticised PVC pipes of pressure rating 10 Kgf/cm² including fittings, fixed complete to walls, ceilings or in floors etc., (including concealing, if required) and to any type of pipe complete all as specified and as directed.

S&F 25mm bore unplasticised PVC pipes of pressure rating 10 Kgf/cm² including fittings, fixed complete to walls, ceilings or in floors etc., (including concealing, if required) and to any type of pipe complete all as specified and as directed.

M&L for Cutting chases in PCC block masonry walls, for shelves, lintels, edges of landing etc., and making good, cutting not exceeding 10 cm girth complete all as specified and directed.

S&F in repair 25mm dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron or CPVC pipe, complete all as specified and as directed.

S&F in reapirs rotational moulded polyethylene water storage tanks, triple layered, ISI marked (cylindrical vertical with closed top), 1000 litres capacity, hoisted and fixed in position all as specified in SSR Part I, 2009 including 25mm dia or bore PTMT ball valve high pressure with epoxy coated aluminium rod & high density ball (minimum weight 455gms) screwed for iron pipe, provision of 40mm/25mm spouts for connecting inlet, outlet, over flow and washout pipes including taking down old tanks complete all as specified and as directed.

S&F in repairs Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and as directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length pipes single socketed, in any length with rubber ring joints fixed to walls using synthetic rubber adhesive cement solvent complete all as specified and as directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length pipes single socketed, in any length with rubber ring joints fixed to walls using synthetic rubber adhesive cement solvent complete all as specified and as directed.

S&F PVC (SWR) bends any radius, diameter of outlet 110 mm complete all as specified and as directed.

S&F PVC (SWR) bends any radius, diameter of outlet 75 mm complete all as specified and as directed.

S&F PVC (SWR) bends with oval access door, any radius, diameter of outlet 110 mm complete all as specified and as directed.

S&F PVC (SWR) bends with oval access door, any radius, diameter of outlet 75 mm complete all as specified and as directed.

S&F PVC (SWR) branch piece, (Single T) equal or unequal, diameter of outlet 110 mm complete all as specified and as directed.

S&F PVC (SWR) branch piece, (Single T) equal or unequal, diameter of outlet 75 mm complete all as specified and as directed.

S&F PVC (SWR) branch piece, (Single Y) equal or unequal, diameter of outlet 75 mm complete all as specified and as directed.

S&F PVC (SWR) vent cowl of diameter 110 mm complete all as specified and as directed.

S&F PVC (SWR) vent cowl of diameter 75 mm complete all as specified and as directed.

S&F PVC (SWR) multi floor trap with grating including jointing with solvent cement, diameter of outlet 75 mm complete all as specified and as directed.

S&F in repairs vitreous China wash hand basin, white, flat back, size 550mm x 400mm including cutting for and pinning in ends of brackets or erecting stand, 32mm dia waste coupling brass chromium plated, bottle trap 32mm bore brass chromium plated with necessary packing union and caps, chain and plug, PVC connections 15mm size with PTMT nuts of length 450mm, screwed down for iron pipe or for unions complete all as specified and as directed.

S&F in repairs for vitreous China, wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and as directed.

M&L in repairs for vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests, P or S trap including provision of lime concrete bedding with and including flush pipe of polyethylene of low or high density or PVC 32 mm dia, PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

M&L in repairs for PVC valveless, syphonic action type, flushing cistern, 10 litre capacity, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.

S&F in repairs health faucet, brass, chromium plated with 8mm dia, 1.0 m long flexible tube, screwed for iron pipe or for brass ferrule 15mm dia or bore complete all as specified and as directed. MAKE: PRAYAG Cat part No. BEA-41 or equivalent in PARRYWARE/ ZOLOTO/ JOHNSON

M&L in repairs for PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and as directed.

S&F in repairs kitchen sink with drainage board made of stainless steel 1mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F in repairs of Waste coupling of 32mm chromium plated suitable for glazed ware basins or kitchen sink with long screwed shanks and fly nuts etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs of PVC waste pipe 32mm bore, 900mm long etc complete all as specified and directed by Engineer-in-Charge

Drilling holes with drilling machine for bolts, gas pipes, etc., not exceeding 25mm dia, upto of 10cm depth complete all as specified and as directed.

S&F in repairs 25mm dia stainless steel curtain rods with fancy type with fixing brackets, stops, rollers etc., complete all as specified and as directed.

S&F wall mixer 3-in-1 system with provision of both hand shower and over head shower composite with 115mm long bend pipe connecting legs & wall flanges with and including hand shower with 8mm dia shower tube, 450mm long shower arm and over head shower, fixed in repairs complete all as specified and as directed. MAKE: PRAYAG Cat part No. PIS-80H for wall mixer PRAYAG Cat part No. BHS-87 for hand shower PRAYAG Cat part No. BOS-90 for shower arm & over head shower

P Babu

CHANDER SEKER ENTERPRISE

SKV Engineering

Bismi Builders & Enterprises

M/s Saina Enterprises

DEEPAK AGENCIES

CARTWHEEL CONSTRUCTION