SPECIAL REPAIR/RENOVATION OF LAB COUNTER AND DISPLAY CABINET IN CHEMISTRY LAB, PHYSICS LAB AND BIOLOGY LAB IN KV SCHOOL BARNALA AT AF STN BARNALA UNDER GE AF HALWARA

Amount

Demolition of cement conrcete of any description and in any position not otherwise specifically provided complete all as specified and directed.

Demolition of reinforced cement conrcete of any description and in any position not otherwise specifically provided complete all as specified and directed.

Demolition of brick work or stone/boulder masonary built in cement mortar including all quoins, arche, pillars etc, but excluding ashlar facing, dressed stone work and pre cast concrete articles complete all as specified and directed.

M&L for brick work with sub-class “B” bricks straight or curved in plan exceeding 6mtr mean radius with old size bricks in cement mortar 1:6 complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

M&L for reinforced cement concrete 1:2:4 reinforced type B-1 (using 20mm graded stone aggregates) as in stair cases lintels RCC chajjas, and sunshade etc. complete all as specified and directed.

M & L for 10mm dia and over TMT bars cut to length bent to shape as required including binding with mild steel annealed wire not less than 0.90mm dia complete all as specified and directed.

M&L for formwork to sides and soffits of shelves, suspended slab, chajjas including support, overhanging etc. for rough finished surfaces of concrete flat complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 15 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L for 10 mm thick rendering or bedding layer of cement mortar 1:4 for vertical surfaces of wall for fixing tiles complete all as specified and directed.

M&L for vitrified joint free printed coloured tiles 8-10 mm thick (square/ rectangular) double charge, area of each tiles not exceeding 0.36 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tile complete all as specified and directed.

M&L for vitrified joint free printed coloured tiles 8-10 mm thick (square/ rectangular) double charge area of each tiles exceeding 0.42 Sqm but not exceeding 1.00 Sqm as in skirting and vertical surfaces etc; set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tile complete all as specified and directed.

M&L for Non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and directed..

M&L for glazed ceramic tiles of size 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade in vertical surfaces complete all as specified and directed.

M&L for 16 to 20mm thick granite stone slab (any colour) machine cut for shelves, table top, flooring etc over cement screed base laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab including cutting rubbing and polishing complete all as specified. Note:- Colour of grantie stone shall be approved by GE.

Taking down cement plaster including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:6 as on brick walls finished the surface even and smooth without using any extra cement complete all as specified and directed.

M&L for 5mm thick cement plastering in cement mortar (1:3) as on ceiling surfaces finished even and smooth without using extra cement complete all as specified.

M&L for preparation of new plastered surfaces and applying two coat of distemper oil emulsion over a coat of primer and JK Birla wall care putty on new plaster surfaces complete all as specified and directed..

M&L for complete removal of old existing treatment of walls and applying two coats of distemper oil emulsion over one coat of primaring coat of and Birla putty filling complete all as specified and directed.

M&L for preparation of old steel surfaces of any description n.exc 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking down of chowkat / frames with shutter (without taking off shutter from frames )exceeding 1.5 Sqm but not exceeding 4 Sqm each. complete all as specified and directed.

S&F factory made pressed steel frames made out from 1.25mm thick steel sheet for doors of size 105x60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.and including treated with tar or coal tar black paint on steel surfaces in contact / embeded in concrete or masonary work including filling hollow portion of frame with PCC 1:3:6 type C-1 complete all as specified and directed.

S&F 2nd class hard wood factory made plain, framed, panelled shutters, 35mm thick, panelled shutters (any number of panels), with panels of 9mm thick veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

S&F aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specified and directed

S&F Aluminium anodised cast type handle of 150mm size complete all as specified and directed..

S&F Aluminium anodised cast type handle of 100 mm size for cupboard shutters complete all as specified and directed..

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F small fitting of 1st class hard wood any shape not exceeding 200cucm each as in door stopper, cleat etc complete all as specified and directed.

S&F 25 mm dia Harison rails , mild steel , chromium plated with fixing fancy type brass cp brackets and side knobs , stops, rollers etc as in curtain rod and fixed to wall complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frames, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with putty or fixed with beads in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats white wash complete all as specified and directed.

M&L for preparation of old decorated surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel of any description over 10cm width or girth not otherwise described over applying two coats of synthetic enamel paint over a coat of a red oxide zinc primer complete all as specified and directed.

M&L for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10 cm width and girth and applying one coats of synthetic enamel paint complete all as specified and directed.

S&F PVC door frame of size 50x47mm made out of 5mm wood grain printed PVC sheet, reinforced with MS square tube complete all as specified and directed.

S&F 18mm thick one side prelaminated decorative solid PVC boards as in cabinet / cupboard shutters & general pupose type fixed with screws to PVC frame work. complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish or electro galvanised with 40 mm width flaps when open complete all as specified and directed.

S&F 100mm Hasp and staple, safety type aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F wall mounting display cabinet of size (1.20Mtrx0.75Mtrx.30Mtr ) of 18/19mm thick one side laminated PVC Boards with one middle vertical support consisting of 2 Nos middle 8mm thick Glass shelf & front side sliding 5.50mm glass shutthers including locking arrangement, handles and aluminium channels for sliding of glass, including all necessary fittings and fixing of wall arrange ments complete all as specified and directed by Enger-in-Cahrge.

S&F 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, in any position(with clamps in wall) complete all as specified and directed

S&F PVC (SWR) bends 75 mm dia

S&F 50 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, in any position(with clamps in wall) complete all as specified and directed.

S&F PVC (SWR) bends 50 mm dia

S&F PVC (SWR) junction single 'T' equal or unequal of 50 mm dia complete all as specified and directed

Taking down or up steel tubing 15mm bore and connections inculding cleaning for refixing or removal to store complete all as specified and directed

All as per Sl item No 49 above but 20mm bore

S&F 15mm boreTube 'medium grade' galavanised, with all fitting and fixed complete to walls and ceiling etc complete all as specified and directed.

All as per Sl item No 51 above but 20mm bore

S&F stop valves 20mm, cast copper alloy, screwed down, high pressure with crutch or butterfly handle etccomplete all as specified and directed

S&F rotational moulded water storage tank (cylinderical vertical with closed top ) hoisted and fixed in position capacity 500 ltrs with 20mm ball valve high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball (Minimum weight 210 gms) complete all as specified and directed.

S&F in cast iron floor trap of 75 mm dia, chromium plated grating including jointing with solvent cement complete all as specified and directed.

S&F white vitreous china laboratory sink of size 600x450x200mm size including CI/MS brackets , PVC waste pipe , waste coupling of suitable size/length, 15 mm dia long neck CP pillar tap, 15mm bore CP Angle cock and all connection complete all as specified and directed..

S&F 15mm dia PVC connection 45 cm long with two nuts and washers complete all as specified.

S&F grating round 50mm size of PTMT (minimum wt 25 gms) complete all as specified and directed

S&F 15mm bore bib taps long body, C P cast copper alloy, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

S&F 15mm bore stop valves, chromium plated, cast copper alloy, fancy type with capstan head and cup, screwed down, high pressure, screwed both end, long screwed shank for iron pipe complete all as specified and directed.

S&F 15mm bore stop valves, chromium plated, cast copper alloy, fancy type with capstan head and cup, screwed down, high pressure, screwed both end, long screwed shank for iron pipe (concealed type) complete all as specified and directed..

S&F soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and directed.

M & L for point wiring complete with 1.5 Sqmm PVC insulated and unsheathed FRLS cable single core multi stranded copper conductor, 1100 volts grade drawn through and including PVC casing / capping including copper earth continuity wire of PVC insulated of size 1.50 Sqmm and connected to common earth dolly with all accessories (gang box for switch socket, ceiling rose box,holder box,tee ,bend etc )complete as specified for : - (a) One ligth point controlled by one 6 Amp one way switch

All as per Sl item No 65 above but one 5 pin 6Amps switch socket outlet point on same board

S&F switch piano flush button SP one way 5 Amp complete all as specified and directed by Engineer - in - Charge.

S & F socket outlet 5 pin 5 Amps flush type complete all as specified and directed by Engineer - in - Charge.

Supply and fixing of ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified and directed by Engineer - in - Charge. .

S&F sub-main wiring with two single core cables PVC insulated and un-sheathed 1.5 sqmm (Nominal Area) FRLS stranded copper conductor drawn in PVC Casing caping including 1.5 Sq mm (Nominal Area) copper cable as earth continuity conductor and making good the disturbed surfaces necessary junction box and covers including necessary connections, PVC flexible pipes are used in pannel board while connecting the cable complete all as specified and directed by Engineer - in - Charge. (Note : PVC cable and PVC casing caping shall be ISI marked)

S&F in replacement of existing tube light fitting with LED 36 watt hanging light with cutting edge technology to provide quality illumination and superior optical control. Use of direct/ indirect LED light engines inclued with suspension system and 3 core cable for connection from ceiling rose to light fitting complete all as specified and directed by Engineer - in - Charge. Make:-Havells Model No.SABERLP36WLED857SPMMAWH or equivalent in polycab and C&S)

S&F LED flexi AC Strips in display cabinet along with necessary wiring and provided plug top at the end of per display cabinet for connection in 5 amp socket complete all as specified and directed by Engineer - in - Charge. Make:-Havells Model No.Flexi-Neon LED AC Strip 3000 K IP65 or equivalent in polycab and C&S)

SANGAM ENGINEERS

S K BANSAL AND CO.

JINDAL AND COMPANY

CHOUDHARY ENTERPRISES