Boys Higher Secondary School Nawakadal (Resource Room)

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in- charge:1:3:6 or richer mix (i/c equivalent design mix)

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:In cement mortar

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) including Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand)

Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints . Size of tile 600x600 mm including cost of 3mm spacers

Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints . Size of tile 600x1200 mm including cost of 3mm spacers

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade (Area of slab over 0.5 sqm)

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing of white vitreous wash basin with pedestal of approved make including all necessary fixtures complete job.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 610x510mm bowl depth 200mm

Providing and fixing of C.P fittings of approved brand and manufacture including necessary fittings and fixtures complete job.

Bib cock

Angle value

Grating

Basin mixer

Wall mixer

Waste pipe

Soap case

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete

Providing & fixing of PVC pipe heavy duty Type-B (Prince, Finolex, or equivalent), Water or Vent pipe with cowl with necessary bends , junctions,reducers, rubber washers , adhesives , including cost of all fittings and fixtures like bends Tee's Collars, traps, Sockets Spigots ,reducers, traps, washers, earth work, Sand Cushion and Back Filling wherever required as per the directions of Engineers in charge complete job.

50 mm dia pipe

75mm dia pipe

110mm dia pipe

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in- charge.

Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe , 25mm OD(SDR-7.4)

Internal work-exposed on wall with clamps at 1.00 meter spacing PN-10 pipe , 50mm OD(SDR-11)

Providing and fixing PPR Unions

PPR Union 20mm

PPR Union 50mm

PPR Union 40mm

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete

25mm nominal bore

50 mm nominal bore

Providing , installation, commissioning and testing Hot water Geyzer of approved make including fixing with bolts/ fasteners/PVC connection etc. Venus, Recold, Hindware, Havells, Jaquar, Crompton of required capacity fittings and fixtures all complete wherever required in the course of completion. complete job.35 liters

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.1 mm thick

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/liter

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.)For fixed portion.Powder coated aluminum (minimum thickness of powder coated 50 microns)

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in- charge.Pre-laminated particle board with decorative lamination on both sides.

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer- in-charge. (Cost of aluminum snap beading shall be paid in basic item.)With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm)

Providing and fixing factory made PVC door frames of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and jointed with two numbers of 150mm long brackets of 15x15mm MS square tube, the vertical door profiles to be reinforced with 19x19mm MS square tube of 19 gauge, EPDM rubber gasket weather seal to be provided throughout the frame. The door frame to be fixed to the wall using MS screws of 65/100mm size complete as per manufacturers’ specifications and directions of engineer-in-charge

Providing and fixing 30 mm thick factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing.Pre-laminated PVC door shutters

Providing and Fixing of Hardware fittings of approved brand and manufacture including necessary fittings and fixtures complete job.

Hinges (4")

Aluminium handles(4")

Aluminium handles(10")

Tower bolts (4")

Tower bolts (6")

Sliding roller

Providing and fixing 3.5mm thick glass panes of standard quality in glazed shutter including cost of wooden beading, nails etc.complete job. all inclusive.

Construction of Brick Masonry manhole with internal size 1'6" x 1'6" and required depth including making of necessary connections, with internal cement plaster of 15mm thick with neat coat of cement incl cost of M.S cover of Ms plate 5mm thick and frame of 40x40x5mm angle etc including priming coat, complete job.

Supply and laying of 25/32 mm dia PVC medium Grade conduit/Channel laid on surface with screws fixed in rawal plugs complete with all allied accessories like bends Tee's etc Complete job; inclusive all.

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil

Providing & laying of stone soling hand packed in foundation and plinth incl ramming, watering, compaction & lead lifts all carriages upto site of work complete.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for:

Foundations, footings, bases of columns etc. for mass concrete.

Shelves (cast-in-situ)

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

15mm cement plaster on the rough side of single or half brick wall finished with a floating coat of neat cement of mix :1 : 4 ( 1 cement : 4 fine sand)

Proving and fixing of 900-1200mm dia R.C.C Rings in soakage pit incling excavation, dewatering complete job; all inclusive.

Carriage of materials by way of mechanical transport including loading unloading leads lifts from source to site of work complete job.

Sand and Aggregates for an average lead of 20Kms

Bricks for an average lead of 25Kms

Providing of Wiring for Lighting point/Ceiling fan point/Ex.fan point/Call bell Point with 1.5 sq mm FRLS PVC Insulated multi strand copper Wire of Polycab /Finolex /Paramount / Anchor make dully isi marked in surface / recessed medium class PVC conduit ,. ( Excl Cost of Conduit ) but including cost of circuit wiring of same size from DB Box to first switch in sub circuit complete job . (Seperate circuit for normal and invertor points ) The job includes providing and fixing of 6 Amps one way switch of SSK /REO / Anchor make to be fitted on backlite hylum sheet of required size (incl cost of hylum sheet) to be fitted on walls with necessary screws including refacing of walls whereever required complete job.

Providing and fixing of wiring for wall plug points in 3x 2.5 sq mm ( P+N+E) FRLS PVC Insulated multi strand copper conductor wires of Polycab /Finolex /Paramount / Anchor make to be laid in surface / recessed medium class PVC conduit. ( Excl Cost of Conduit/Channel ) . The job includes providing and fixing of 3 No's of 6 Amps one way switch and 3No's of 6 Amps Socket of SSK /REO / Anchor make to be fitted on backlite hylum sheet of required size (incl cost of hylum sheet) to be fitted on walls with necessary screws including refacing of walls whereever required complete job.The job includes circuit wires from DB Box to first switch in sub circuit , max two points shall be paired in one circuit complete job ( No extra circuit wiring will be paid what so ever the length )

Supply. Installation, testing and commissioning of 250 mm sq Shutter Type Exhaust fans of of CG /USHA / Standard /Helonix make

Providing ,Installation ,Testing and Commissioning of 12 Watt LED Surface mounted lighting fixtures (round / Square) having aluminium body (CRCA) of Philips /Havells /Trulux /Helonix /Jaguar /Wipro make dully isi marked ,incl 2-pair connection wires complete job. The job includes replacement warrenty of fixture for a period of two years reckoned from date of sucessful commissioning

Supply , Laying and connecting of 6 sq. mm FRLS PVC Insulated Multi Stand copper wire of of Polycab /Finolex /Paramount / Anchor make , laid through conduit excluding cost of conduit for lighting sub-main and AC Points

Supply , Laying and connecting of 4 sq. mm FRLS PVC Insulated Multi Stand copper wire of Polycab /Finolex /Paramount / Anchor make, laid through conduit excluding cost of conduit for circuit wire for invertor sub main.