PROVN OF LED STREET LIGHT FITTINGS AND ALLIED WORKS AT 24 ED (AF) MANAURI

Amount

Excavation in trenches in soft/loose soil not exceeding 1.50 m wide and not exceeding 1.50 m in depth for laying of cables and getting out including trimming of sides complete all as specified and directed.

All as per item No. 1.00 above but depth exceeding 1.50 m and not exceeding 3.00 m.

Returing, filling in, including spreading, leveling watering and well ramming in layers not exceeding 25 cm thick each layer compete all as specified and directed.

Removal of surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.50 m above the starting point complete all as specified and directed.

Material and labour for sand cushioning with a layer of sand 8 cm thick before laying of cable and 15 cm thick after laying of cable in trenches complete all as specified. Note: Punned thickness shall be measured.

Supply and laying old size sub class 'B' bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, adjacent/abutting each other for cable protection complete all as specified and directed.

Supply, laying, jointing and testing underground cable of size 16 Sqmm 4 core, 1100 volts grade, XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) with multi-stranded aluminium conductor laid in trenches, passing through pipe, ducts and makinng electrical connection with including suitable size lugs proper crimped by crimping tool, thimbles, glands, GI Nuts and bolts, washers, insulation tape etc complete all as specified and directed.

Supply, erecting and installation of steel tubular, swaged, pole of overall length 9.00 m having maximum tensile strength 42 Kgf/mm2 of type 410 SP-31 conforming to IS-2713-1980. A through hole of 14 mm dia shall be provided at height of 2.50 m from base plate for inserting 2 core cable from junction box to top of the pole and top portion shall be fabricated for fixing street light fittings complete with cast iron base plate, having suitable dia of hole through the pole with nuts and bolts for earthing arrangement, bottom portion of tubular steel pole having 165.10 mm outer dia in 5 m length, 4.5 mm wall thickness, middle portion having 139.70 mm outer dia in 2 m length, 4.5 mm wall thickness and top portion having 114.30 mm outer dia in 2 m length, 3.65 mm wall thickness of pole wall, approximate weight of pole 147 Kg, respectively, bottom MS square plate duly painted with two coat of black bituminous paint throughout, internally and externally up to planting depth and painting remaining portion of pole with two coats of aluminium paint to the entire exposed surfaces over one coat of red oxide primer making/pasting three nos circular strips each of 100 mm wide with one blue and 02 Nos white colour strip synthetic enamel paint and marking / stencil writing of pole numbers with black paint complete all as specified and directed. Note :- Necessary Excavation and earth work, PCC Work for foundation of pole assembly shall measured paid separetely.

Supply, erecting and installation of GI octagonal type, swaged, pole of overall length 8.00 m having maximum tensil strength 30 Kgf/mm2, with made out of 4 Nos 40 mm dia MS pipe 1.50 m long to be jointed on LT pole including fabrication work with approved design by Engr-in-charge for fixing of 4 Nos street light fitting. A through hole of 14 mm dia shall be provided at height of 1.00 m from base plate for inserting 2 core cable from junction box to top of the pole and top portion shall be fabricated for fixing street light fittings complete with base plate, having suitable dia of hole through the pole with Nuts and bolts for earthing arrangement, bottom portion of GI pole having 135 mm outer dia 3.25 mm thickness and top bottom having 70 mm dia outer dia 3.25 mm thickness, with designed cap suitable on top of the pole, approximate weight of the pole 110 Kg, respectively bottom plate size 225 x 225 x 12 mm including 4 Nos foundation nut bolts 20 mm x 700 mm, including 4 Nos swan neck bracket as per approved design by Engr-in-Charge, including RCC work as per approved company drawing complete all as specified and directed by Engr-in-charge. Note :- RCC Work for foundation, 4 Nos Nut bolts 20 mm x 700 mm, four Nos of swaged type bracket with fabrication work as per approved design by Engr-in-Charge will be deemed to be included in the quoted rate.

M&L for cement concrete 1:3:6 type C-2 using 40 mm graded crushed stone aggregate for foundation of poles, stay assembly, struts, etc. including all necessary formwork complete all as specified and as directed.

M&L for cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregate in foundation for pedstal coppings, coping of pole, bedding of pips including necessaary formwork, fair finishing to exposed surface using extra cement complete all as specified and as directed.

Supply and fixing Energy saving LED street light fitting 60 watt aerodynamically designed for all weather conditions with excellent thermal management with Pressure die cast housing Aluminium body and toughened glass visor fitted in frame, separately driver compartment provided, secondary optical lens for superior light distribution efficiency >110/125/135 LPW, CCT 5700K, IP66, input voltage from 120-270 V power factor above 0.95 complete fitting including making electric connection using three core copper flexible cable from controll box to street light fitting complete with all accessories complete all as specified and as directed. Make : Cat part No CRP-409-60-57-SL-NSG of Crompton or equivalent in C&S electric /Havells/Philips/Bajaj. Note : Contractor shall provide 2 years written manufactures warranty for the LED fixture complete including driver from the certified date of completion.

Supply and fixing 120 watt LED flood light fitting made up of pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP 66 protection, system efficiency > 110/125LPW 10 KV SPO input voltage from 120-270V power factor above 0.95, energy saving IP 65 protection ,required nut bolt washer etc including making electric connection using three core copper flexible cable drawn through in steel tubular pole complete all as specified and directed. Make : Crompton cat part No LFLN-120-CDL/60-M or equivalent in C&S electric /Havells/Philips/Bajaj Note: (i) Take down/ up, replacing of inter connection cable etc and other required site work will be deemed to be included in the quoted rate. (ii) Contractor shall provide 2 years written manufactures warranty for the LED fixture complete including driver from the certified date of completion.

Supply and laying 40 mm bore galvanized steel tubing "light grade" with all fittings,clamps, bolts, nuts and washers (ISI Marked) and fixing to the pole complete with all fittings, laid in trenches/fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

M&L for boring hole under the road/payment /hard standing with the help of trenchesless technology using ultra sound technique and necessary machine complete including HDPE pipe of 100 mm dia suitable for 0.4 mpa working pressure not less than one metre below ground level complete all as specified & directed. Note : HDPE pipe of 100 mm dia will be deemed to be included in the quoted rate.

Supply and fixing LT cable junction box dust and water proof made out of PVC non metalic sheet FRP type, factory made out of PVC non metalic FRP type,factory made, size of box out side 317 x 265 x 160 mm and inside 280 x 235 x 135mm deep with swivelling cover and locking clamp, MS clamps and nut, bolts for fixing the box on steel tubular pole, consisting of aluminium bus bar strip 150 mm x 30 mm x 3 mm - 4 Nos mounted on PVC insulated and provision of incoming and outgoing cable with grommets including inbuilt 6 Amp MCB SP 10 KA one No complete all as specified and as directed. Make - Sintex Cat part No GSJB 3126 or equivalent in Henson/Havells

S&F bracket made out of 40 mm dia "medium grade" galvanized steel (GI) tubing MS pipe 1.50 m long to be jointed on top of LT pole incl fabrication work for fixing street light fitting,bent to required shape (having an angle 145 degree) including nuts, bolts and washers and fixing to the pole and necessary fabrication work for design as approved complete all as specified and as directed.

S&F bracket for street light fittings made out of 40 mm dia "medium grade" galvanized steel (GI) tubing of 1.50 m long, bent to required shape (having an angle 120 degree) including necessary FI clamp (02 Nos of size 40 x 5 mm) suitable size nuts, bolts and washers and fixing to the pole complete all as specified and as directed.

Supply and fix Digital timer switch with Timelite DBs outdoor type factory made powder coated all along internal and external surfaces, weather proof dust/water proof with IP 55 protction, consisting of 01 No AC contactor three phase 32 Amp capacity 25 KA, one digital Timer switch three nos MCB 32 Amp 10 KA toggle switch having both auto manual and by pass system - 01 No mounted on existing pole/panel with suitable size clamps complete all as specified and as directed. Make - Indoasian model Digital time lite swith 32 amp 3 pole cat No TL032DBO and digital time DB cat Part No TDA43110 or equivalent in scheneider/Legrand/Havells/L&T

Supply, fixing , connecting and testing of LED Decorative Post top Lotus plus (Integral) light fitting 40 watt powder coated aluminium body with clear/opal diffuser suitable for landscape lighting in 5700K CCT, IP65 complete prewired complete fix on pillar with suitable size of 40 mm GI pipe as required with bolts, nuts & washers and connect with 3 core 4.00 sqmm PVC insulated cable and PVC conduit 20 mm upto control box to Decorative Post top Lotus plus (Integral) street light luminaries fitting 40 watt complete all as specified and as directed. Make: Bajaj/Philips/Crompton/Havells Note: Cutting, chasesing on pillar suitable for fixing of 40 mm GI Pipe and Accessories will be deemed to be included in the quoted rate.

M&L for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending, cold or hot, drilling holes or bolt in any shape or size including painting with two coats of aluminium paint over a coat of red oxide primer complete all as specified and directed. Note : Unexposed surface shall be given one coat of primer only.

Supply and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor 04 Sqmm 2 core ISI marked LT Cross Linked Polythene insulated (XLPE insulated) glavanised steel strip armoured electric cable along the poles or passing through pipes or laid under floor or through pipes or laid under floor of through walls etc complete all as specified and as directed.

Bharat Trading Company

M/S Garg Sons

Krishna Enterprises

M/S R S Traders

shubham construction

K R GUPTA AND SONS

M/S National Electrical and Electronics Services