WBPWDTE/EE/BED/NIQ_126/Q of 2024-25

Amount

PART - A : COMPOUND LIGHTING Supply & Fixing 415 Volt, following rated sheet steel enclosure with fuses TPN main switch Make L&T/ Havells/Siemens fixing arrangement incl. necy. Gland. Socket , suitable sizes copper connection wires etc to complete the job as per direction of EIC 63 A ( for street light )

Supply and Delivery of 1.1 KV grade following Al. armoured PVC/XLPE (Havells/ Glostar/ KEI/ RR Kabel or as per direction of EIC 4 core25sqmm ( from Main Panel to Street Light Main Switch )

4 core 16 sqmm (for Street light )

Laying of following sizes Al. armoured PVC/XLPE cable surface on wall / on wall by clamp / concealed as reqd. with with 2 x 10 SWG GI wire as per direction of EIC upto 3.5/4 core 25 sqmm with 2 x 10 SWG GI wire

Laying of one No. cable upto 35 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : 4 core 25 sq mm

4 core 16 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials 4 core 25 sq mm

4 core 16 sqmm

Supply & delivery of 9 Mtr Steel Tubular Pole (Jindal /Bansal/Subham) as per specification Type 410- SP-28 as overall length 9 mtr weight 113 Kg & having diamention as per details given bellow: Out side dia & thickness of the Bottom section (139.7 x 4.50) mm; Middle ( 114.3 x 3.65) mm, Top Section (88.9 x 3.25 ) mm with fixing the base plate , necessary drill hole ete as per direction of EIC

Erection of Single 9 mtr Single Steel tubular pole with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts.above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly

Extra on items of above, for providing CC (6:3:1) base block (around the pole) dimension 0.45 x 0.45 x 0.60 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) incl. drilled hole in pole suitable for alkathene/polythene pipe entry, for street light wiring, without Loop Box

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required 40 mm dia

Supply & Fixing of 70 W LED outdoor street light fitting (Crompton make cat No. TRP-409-70-57-HL2-GL-NSG ) complete with all accessories to be fixed on the top of the pole / Projected from wall of the building incl. making holes to the building etc as per direction of EIC. or equivelant make of Philips/Wipro

Supply & Fixing of 50 mm. dia 1.5 mtr. long detachable type G.I. (ISI-Medium) Single arm bracket, suitable for pole head. The arm bracket shall be properly welded with 15 mm. thick stifner plate of pole sleeve for strengthening incl. properly fixing arrangement with the pole by bolts, nuts and washer, with GI socket etc incl. painting to complete the installation as per direction of EIC.

Supplying & Fixing of PVC water proof type Loop box (Make-Sintex) of size 8"X10" comprising of 4 way 100 Amp. Capacity brass stud/terminal make- AC /DC.,having hinged PVC top cover & 4 mm thick with rubber gasket lining,railway type mechanical locking arrangement,comprising of one 250V,15A kit-kat fuse unit,one NL on porcelain insulator etc. conceal in wall as per direction of EIC

Inter connection between Loop Box to fittings by 1.1 KV 3 x 2.5 sqmm single core stranded 'FRLS' PVC insulated & unsheathed copper wire (make-Finolex/Havells/KEI/RR Kabel) through 20mm size PVC pipe incl. necy. fittings as required as per direction of EIC

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. as per G S 2.5 sq mm

Painting of Steel Tubular Pole of 9 mtr length and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint upto 9 mtr. long pole i)1st coat of synthetic paint over 1 coat of RO priming, II)2nd coat of synthetic paint over 1st coat

Painting of single Steel arm bracket of 1.5 mtr lengths and no. of coats of paint, with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint. i)1st coat of synthetic paint over 1 coat of RO priming, II)2nd coat of synthetic paint over 1st coat

Providing CC (6:3:1) muffing 600x600x760 mm in size or equivalent size of cylindrical muffing above ground level around the pole base complete with 3 mm thick neatly finished cement plaster all round after dismantling the unserviceable muffing if necessary Without Loop Box

Supply & fixing of 40 mm dia PVC pipe in CC muffing for cable entry at the bottom of the pole as per direction of EIC

Supplying & fixing MS Pole Cap of suitable size and fixing the same at the top of the pole & necy. tagging by welding method as reqd.i ncl. painting etc to complete as per direction of EIC

Supplying and fixing of 415 V AC timers fixed on wall with flat iron frame as per direction of EIC and the Box shuld be comprising with the following accessorise --- i) Double-door Board – 1 no ii) 230 V , 50 Hz ,16 Amp Single dial 1 x 24 Hrs.Timer ( Microrex QT31 ) of quartz driven running reserve Day dial back up by nickle cadmium battery (Make - GEC / Legrand /L&T ) – 1 no iii) 250 V, 50 Hz , 40 Amp TPN Conctractor with ( 2 NO or 1 NO + 1 NC Aux. Contract ) ( Make - Legrand / L & T/ABB ) – 1 no iv) 250 V, 50 HZ , 40 Amp , TPN MCB Isolator ( Make - Legrand / L & T/ABB ) – 1 no v) Auto / Manual By pass Toggle Switch arrangement – 1 no. vi) 250 V , Diode type neon Indicator lamp ( Make - Legrand / L & T/ABB ) – 1 no vii) Bakelite base with FP bolt type stud / Terminal block incl S & F Neutral Bar etc with this box for termination of power . viii) The complete arrangement must be wiring by 2.5 Sq mm PVC insulated Cu wire with suitable length incl socketing /lugs etc as per requirement & direction of EIC (for controlling outdoor street light fitting (Make - Legrand /L & T / Crabtree )

Excavation of soil for installation of Earth Electrode and filling & ramming as to GS. For morrum soil

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level & restoring surface duly rammed (:For Morrum Soil ISI-Medium GI pipe as to GS.

Connecting the equipments to earth busbar including S & F No. 4 SWG GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages as to GS.

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe as to GS.

PART-B : SITC OF GLOW SIGN BOARD Supply and Fixing of sign board acrylic signages i) Supply and fixing of angle iron frame fabricated from 40 mm x 40 mm square four nos hollow bar with cross and radial support including one no 40x40 mm angle iron support in the middle for the Sign board of following size with suitable three nos. crosss angle support welded with 4 nos angle hook in equal space for fixing on the structure with all necessary welding and fabrication. The structure shall rest in both sides with proper welding as per instruction of EIC. ii) S&F LED Sign Board made 3 mm thick ACP Sheet (Alstrong/ Aludecor) finished with approved metallic colour as back ground (blue) after router cutting. The riser structure also shall be covered with ACP Sheet.& appx 6-7 inch depth (Both size ACP sheet) iii) S&F Special type of imported acrylic English letter appx 50 mm thickness flushed on the ACP board made on imported acrylic ACAST sheet. The mater appvd by EIC letter font shall be in horizontal line as mentioned. Matter taken from Authority in future for Single 100 Bedded Pre-Fabricated COVID Ward

iv) S&F SMD LED inside the board and to run for each letter including wiring , soldering etc and fixing the SMPS properly with the specification of the SMD 1.LED colour : White/ Red/ Blue (make-samsung /Nichia /Cree/ Hisine ) 2.Stright : 2 or 3 nos LED per module 3. Luminous Flux : 140 LUMEN 4. Life : 70000 burning hours 5. Visibility: 100 meter atleast normal eye 6. Power Supply: 1.2 watt to1.6 watt per module 7.Input : 230A.C , Output : 12V DC 8.Shape of LED : recrangle or square 9. Grade : IP - 65

v) S & F LED Power supply 300/ 400W IP65 50/60Hz frequency, 108 to 305 VAC driver power supply other electrical accessories the panel prepared along with its necessary arrangement ( make Hisine/Migion/Cehosa/PWD appvd ) vi) Cost of painting of MS structure with 2 coats of RO primer and one coat of synthetic enamel paint after scrapping with emery paper properly make ICI/Asian paints vii) Cost of erection of scaffolding for fixing the Signage viii) Testing and commissioning of the LED board as per following nomenclature

Supply & Fixing of 16 SWG GI Sheet in the back side of Sign board and fixing the sheet on the structure with all necessary welding and fabrication. as per instruction of EIC

Cost of carrying the LED sign board from work shop to site

Supply & Installation of LED type Glow Sign Board & the boards made with high supper quality clear acrylic sheet with with laser engraving illuminated by colourful GREEN / BLUE LED of 3 mm in size , IP65 50/60Hz frequency, 108 to 305 VAC driver power supply & 70000 Burning Hours , water proofing & fixing the LED on the top of the board with black bacalite light bar , with supper bright , easy to be seen in (Indoor) day light & at night, including supply of additional Adopter which Power Input : 100-240 Volts, 50 HZ A.C , Power Output : 12 Volts DC . Special arrangement for fixing the Board with decorative metal chain / hanger & two hoocks for easy hanging on wall with the following matter to comp.set incl. S&F connection wire as required as per direction of EIC .

PART-C: SITC OF WATER COOLER CUM PURIFIER SITC of green model cooler cum purifier with 120 Ltrs storage capacity. with external dimensions (w x d x h )- 750 x 570 x 1350, operating power supply-230 ± 10 % v ac, 50 HZ, running current in amps (max)-4.0 ± 10 %, power in watts-850 ± 10 %,water storage tank capacity-120 ltr, capacity with comfort level water outlet temperature at 17 deg c-60 lph,refrigent-r134 22,compressor make- Emerson, thermal insulation for storage tank-puf, total no. of faucets-03 (1 normal +2 cold ), recommended max water flow rate through the faucets in lpm-1.5,no of stages for filter cum puriier-03,no of purifier circuits-03,purifier fault indication (buzzer),visual control (leds),water flow swith,10 minutes UVauto shut off, storage tank material & body material- front ss 304 & rest pre coated steel, working with -0.4 kg/cc min. water input pressure and 2 kg/cc of max. water input pressure, integrated water cooler cum purifier with endpoint purification technology, including 1 year warranty as per condition. Make - Eurekaforbes/Kent/LG/Hindustan Unilever/Bluestar .( water purifier 2(two) nos in each floor (First Floor & Second Floor)+ 1 (one) nos in each floor ( Ground Floor & Third Floor)=6 Nos

Submission of details SLD ( both hard & soft copy ) by CAD of the above job with indicating all the items of Power Distribution system with position of Panel, VTPN's, PBDBs, LBDBs , Power Plugs , Lights , Fans , Switch Boards etc. incl. Submission of all testing reports regarding the EI work to complete the installation as per direction of EIC .

PART-D: POWER SOURCE ARRANGEMENT Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating.Make- L&T or equivalent make of Havells/Siemens 415 A

Supplying of following sizes Al. armoured PVC/XLPE (Havells/ Glostar /KEI/Polycab or as per direction of EIC 2 X 4 core 240 sqmm ( for Normal Power) (2 nos cable in parallal laying)

Laying of two cables of foolwing sizes in an underground trench in single tier formation (horizontal), the trench size : 680 mm x 760 mm average depth, with brick protection on the top of each cable 8 (eight) Nos. bricks per Mtr. and 4 (four) Nos. bricks per Mtr. as separator between the bricks and cables and also trench to be filled up with shifted soil, levelling up and restoring surface duly rammed above 185 sqmm

Supplying and fixing compression type gland complete with brass /gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : 4 core 240 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials 4 core 240 sqmm

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required 200 mm dia

DURGAPUR POWER (BID ID -5687144)

RS SYSTEMS AND PROJECTS (BID ID -5692051)

UJJWAL MUKHERJEE (BID ID -5701085)