16 of EE/RD/PHED of 2020-2021

Amount

Deputation of resources person for supervision of ISO/IEC 17025:2017 for continuing NABL accreditation (Chemical Testing of potable water) of Nadia District Water Testing Laboratory under PHE Dte, as per below details:

Preparation of Quality Manual as per ISO/IEC 17025:2017 & nessary amendments.

Time to time Guidelines for Laboratory Setup (Instrument list, Class/Accuracy & Suppliers Name) and as per requirement of ISO/IEC 17025:2017

To conduct in-house Refresher course on ISO/IEC 17025:2017 as per mandatory requirement of NABL

To supervise and assist for preparation & record of General Documentation as per mandatory requirement of ISO/IEC 17025:2017 viz. - Reviewing and Up-dating of Documents & Records - Reviewing and Up-dating of Test Procedure & risk analysis

To supervise and assist for preparation & record of Technical Documentation as per mandatory requirement of ISO/IEC 17025:2017 viz. -Uncertainty re-calculation - Record follow up and update

To supervise and assist for Quality Managers Records as per mandatory requirement of ISO/IEC 17025:2017 viz. - Management Review Meeting (MRM) - Internal Audit - Review & Follow-up Intermediate check - Review & Follow-up Inter-laboratory comprising - Review & Follow-up Replicate test

To supervise and assist for Document control as per mandatory requirement of ISO/IEC 17025:2017

To supervise and assist for the preparation for surveillance internal audit & Non-conformance closing after internal audit as per mandatory requirement of ISO/IEC 17025:2017 viz.

Any other non-conformance closing related to ISO/IEC 17025:2017 for continuing NABL accreditation (Chemical Testing of potable water)

To provide logistic support to the auditor/s during survilliance audit

To provide logistic support to the auditor/s during Final audit

Supply of 22nd Edition -Water & Waste water Analysis published by American Public Health Association (APHA)

Supply of Publication of BIS for IS 3025: Part 11, Part 16, Part 10, Part 21, Part 23, Part 53, Part 37, Part 26

Supply installation & demonstration of Basic salinity- conductivity-TDS meter Cond 7110/Star 212 wit cell Tetracon 325/Duraprobe, 4-electrode conductivity cell . Mk: Thermo-orion/ WTW/as approved by EIC

Supply installation & demonstration of Microprocessor based pH/mV/Temp meter with GLP support, 5-point calibration & with calibration due alarm, auto-logging function, 6-point calibration, range: 1-16 with resolution 0.1/0.01/0.001 pH, with provision to download data to computer & the system shall be complete with pH Electrode , Auto Temperature oompensation Probe, Integral Electrode Holder, 100/240 VAC Adapter, RS232 cable Mk: Thermo/ Eutech/WTW/Fisher, as approved by EIC

Supply of F1 Class Analaytical Certified (as per ISO-17025 requirement) standard weight Box with fractional weight TX-F1-1500- SHI-AM

Supply & demonstration of Hot Air Oven : Outer body made of Mild Steel Sheet duly powder coated and inner chamber made of Stainless Steel Sheet (304 Grade) and adjustable Stainless Steel Wire Mesh shelves. Space between inner chamber and outer wall is filled with high grade mineral wool for minimal heat loss. The Double Walled Door should have synthetic rubber / fibre gasket. Unit should have ventilation slides on two sides to control inner air/ vapor circulation. Fitted with beaded heating elements placed in ribs, at bottom and sides for uniform heat distribution. To work on 220/230 volts AC supply. Unit should be fitted with Digital Temperature Indicator-cum- Controller for temperature control from +5º C above ambient to 250ºC Fitted with Air Circulating Fan. Working chamber Size: 16”x16”x16”

Supply & demonstration of Hot Plate, rectangular, controlled by energy regulator with stirring facility 18X18 SPINOT 308C

Supply & installation Barometer (pressure 740 to 800 mm Hg) Android & Room Thermometer 0 to 50 deg C with calibration certificate as per ISO-17025 requiremet

Procurement of Certified (as per ISO-17025 requiremet) RF wireless thermometer-hygrometer-clock.

Procurement of certified specific gravity Hydrometer 1000-1500 as per ISO-17025 requiremet

pH Buffers - 25°C : Clear, Colourless pH Buffer Solutions. Tested at 25°C and certified by Reagecon's ISO 17025 accredited test method. NIST traceable, pH: 2.00 ±0.01@25°C in 500 ml

pH Buffers - 25°C : Clear, Colourless pH Buffer Solutions. Tested at 25°C and certified by Reagecon's ISO 17025 accredited test method. NIST traceable, pH: 4.00 ±0.01@25°C in 500 ml

pH Buffers - 25°C : Clear, Colourless pH Buffer Solutions. Tested at 25°C and certified by Reagecon's ISO 17025 accredited test method. NIST traceable, pH: 7.00 ±0.01@25°C in 500 ml

pH Buffers - 25°C : Clear, Colourless pH Buffer Solutions. Tested at 25°C and certified by Reagecon's ISO 17025 accredited test method. NIST traceable, pH: 10.00 ±0.01@25°C in 500 ml

Conductivity Standard- 25˚C, certified by ISO 17025 Accredited test Method. NIST traceable 1413us/cml at 25˚C in 500 ml bottles

Turbidity Standard Non Ratio, 1000 NTU, certified by ISO 17025 Accredited test Method. NIST traceable

Potassium dichromate volumetric standard, secondary reference material for redox titration, traceable to NIST standard reference material.

Potassium Chloride, CRM, 5 gm

Copper Sulfate, pentahydrate, ACS, 250gm

Iron standard solution traceable to SRM from NIST Fe(NO3)3 in HNO3 0,5 mol/l 1000 mg/l Fe, 100 ml

Sodium carbonate volumetric standard, secondary reference material for acidimetry, traceable to NIST SRM

Calcium carbonate volumetric standard. secondary reference matenal for complexometry, traceable to NIST Standard Reference Material (SRM) CertiPUR® for Total Hardness as CaC03 .

Reagent for Silica, Silicate Range 0.005–5.00 mg/l Si, 0.011–10.70 mg/l SiO2, 300 tests 14794

Silicon standard solution traceable to SRM from NIST SiO2 in NaOH 0,5 mol/l 1000 mg/l Si, 500 ml

Filter Paper No: 542, 12.5 cm, whatman

Procurement of Desiccator, 8" dia

Silica Gel, self indicating, Blue coarse, 500 gm

Procurement of Porcelein Crucible 25 ml-set of 4 nos

Procurement of Porcelein basin - set of 2 nos

Hydrochloric Acid min 36.5%, Analytical Grade, set of 6000 ml,

Hydroxylamine Chloride Analytical grade, 100 gm

Ammonium Acetate, Analytical grade 500 gm

Sodium Acetate, 250 gm

1-10 Phenanthroline monohydrate, set of 15 gms-

Sulfuric Acid about 98% Analytical Grade, set of 2000 ml

Nitric Acid about 69%, Analytical grade set of 2000 ml

Phenolpthelein indicator, 50 gm

Methyl Red indicator , set of 50 gm

Bromocresol Green indicator 5 gm

Iso propyl Alcohol Analytical quality, 500 ml

Potassium Iodide analytical quality, Asay: min 99.8%, set of 200 gm

Fluoride standard solution NaF in H2O 1000 mgn F , NIST Traceable- Certified, 500 ml

Total tonic Strength Buffer Solut.on- to- Fluonde analysts (TISAB-III, 475 ml)

Electro Filling Solution- Universal bridge electrolyte for Fluoride ref electrode, 250 ml

Acetone, Lab grade, set of 2000 ml

Sodium Thiosulfate pentahydrate, 500 gm

Acetic Acid Glacial Analytical grade, set of 1000 ml

Starch soluble Analytical quality, 500gm

Ammonia Solution 25% Analytical quality set of 2000 ml

Ammonium Chloride Analytical grade, 500 gm

Magnesium Sulfate Analytical quality, 500 gm

Amonia Buffer solution for total hardness, 500 ml

Eriochrome Black-T, 25 gm

Triethanolamine min: 99.5% for Total Hardness, 500 ml

EDTA disodium salt, analytical grade, 100 gm

Sodium Hydroxide Analytical grade, 500 gm

Potassium Ferro Cyanide, 500 gm pack

Beaker 250 ml, Borosilicate glass

Beaker 100 ml, Borosilicate glass

Conincal Flask 250 ml, Borosilicate glass

Volumetric Flask Class A, certified as per ISO 17025 requirement set of 4, Cap: 50 ml

Volumetric Flask Class A, certified as per ISO 17025 requirement set of 6, Cap:100 ml

Volumetric Flask Class A, certified as per ISO 17025 requirement set of 2, Cap: 250 ml

Volumetric Flask Class A, certified as per ISO 17025 requirement set of 2, Cap: 500 ml

Volumetric Flask Class A, certified as per ISO 17025 requirement set of 2, Cap: 1000 ml

Burette, Class A, certified as per ISO 17025 requirement set of 4, Cap: 50 ml, Glass

Pipette Graduated Mohr type, Class A, certified as per ISO 17025 requirement set of 6, Cap: 1 ml/0.01 div

Pipette Graduated Mohr type, Class A, certified as per ISO 17025 requirement set of 4, Cap: 2 ml/0.02 div

Pipette Graduated Mohr type, Class A, certified as per ISO 17025 requirement set of 6, Cap: 5 ml/0.05 Div

Pipette Graduated Mohr type, Class A, certified as per ISO 17025 requirement set of 6, Cap: 10 ml/0.1 Div

Pipette Graduated Mohr type, Class A, certified as per ISO 17025 requirement set of 4, Cap: 25 ml/0.2 Div

Volumetric Pipette Class A, certified as per ISO 17025 requirement set of 2, Cap: 10 ml

Volumetric Pipette Class A, certified as per ISO 17025 requirement set of 2, Cap: 25 ml

Measuring Cylinder Class A, certified as per ISO 17025 requirement 10 ml

Measuring Cylinder Class A, certified as per ISO 17025 requirement 25 ml

Measuring Cylinder Class A, certified as per ISO 17025 requirement 50 ml

Measuring Cylinder Class A, certified as per ISO 17025 requirement 100 ml

Beaker PP, set of 12, Cap: 50 ml,

Measuring beaker 25 ml

Wash Bottle set of 6, Cap:500 ml PP

Aspirator Bottle set of 2, Cap: 5 lit

Burette Stand- with single burette clamp, PP coated, set of 2

Quartz Cuvette, set of 2, 10mm

Glass Cuvette, set of 2, 20mm

Glass Cuvette, set of 2, 50mm

Pipette Controller upto 100 ml

Lab Tissue Paper roll

Safety Googles, pk of 2 nos

Asbestose Gloves, pk of 2 pairs

Acid Alkali proof Gloves pk of 2 pairs

Particulate respirator with exhalation valve- mask, pk of 10

Nitrile Gloves, pk of 100 nos

Laboratory Clog front cover shoe

Laboratory Apron set of 6, assorted size

LDPE container Sample Collection bottle 200 ml,

Supply of online Safety Shower & eye-wash, specification as per IS 10592:1982, SS stay open ball valve with yellow ABS push plate & activation for shower - Pull rod & for eyewash – Push plate

Supply, Delivery & Installation of CRM storage Refrigerated Chamber, double door

Temperature sensor- digital

Supply, Delivery & Installation of Sample storage Refrigerated Chamber, 200 Lit capacity, 1 to 10 deg C range, 3 shelves Suitable for Sample storage, Static type refrigeration. Glass viewing door for sample inspection, forced air circulation system to maintain uniform temperature throughout the chamber

Fume Chamber for digestion of samples & exhaust of acid fumes/harmful gases during arsenic analysis, MS body, work bench made of Granite. Front door should move vertically up and down with concealed counter balanced weigh. The unit should be fitted with fluorescent light and a gas cock for gas/air supply & front facing panel should have 15/5 Amp socket with switches for exhaust system and fluorescent light. The system should have exhaust system with necessary ducting facility.

Supply and Installation of double stage Quartz Boiler, Quartz condenser & built-in Quartz heater, Vertical panel mounted with Auto Low Water Level cut-off device with audio alarm system. Approximate output: 2.5 lit/hour. Distilled Water from this Quartz Double stage distillation plant should be suitable to use during spectrophotometric analysis of metal ions.

Calibration of measuring Instruments : with traceablility & as per requirement of NABL guideline (ISO/IEC 17025:2008) for the equipments Viz. Spectrophotometer, pH Meter, Turbidity meter, Oven, Weight Box, Analytical Balance, Burette, Pipette of different volume, Volumetric Flask of different volume, measuring cylinder of different volume, Thermometer & any other measuring Instruments required for calibration as per NABL traceability & conformity (recalibration of iequipments, if necessary within stipulated time frame).

SAKTI ENTERPRISE

Utsav Agency