REPAIR OF ALL TYPES OF WOODEN FURNITURE AND POLISHING OF ALL TYPE OF WOODEN FURNITURE AT OFFICER MD ACCN VARIOUS UNIT AT BSO YARD UNDER GE(NW) KUNJALI COLABA MUMBAI

Amount

Chair Writing (FD-250, 280)

Removing of unsv/broken rear leg and providing/fixing new leg made out of 1st class hardwood teakwood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins & duly french polishing chair writing completely all as shown on drg and as specified.

Removing of unsv/broken front leg and providing/fixing new leg made out of 1st class hardwood teakwood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins & duly french polishing chair writing completely all as shown on drg and as specified as directed by Engineer-in-charge.

Removing of unsv/broken back rest and providing/ fixing new back rest made out of 1st class hardwood teakwood duly French polishing chair writing completely all as shown on drg and as specified.

Removing of unsv/broken stiffener and providing/fixing new stiffener made out of 1st class hardwood teakwood duly french polishing chair writing completely all as shown on drg and as specified.

Removing of unsv/broken front/rear rail and providing/fixing new front/rear rail made out of 1st class hardwood teakwood including drilling of Cane holes duly french polishing chair writing completely all as shown on drg and all as specified.

Removing of unsv/broken side rail and providing/fixing new side rail made out of 1st class hardwood teakwood including drilling of Cane holes and duy french polishing chair writing completely all as shown on drg and all as specified.

Removing of unsv/broken arms rest and providing/fixing new arm rest duly shaped & made out of 1st class hardwood teakwood and duly french polshing chair writing completely all as shown on drg and as specified.

M&L for French polishing to the repaired chair writing in two coats after preperation of surfaces all as specified on drawing or as directed by Engineer-in-charge.

M&L for Recaning of repaired chair writing with best quality of approved plastic cane of white or cream/ivory all as specified on drawing or as directed by Engineer-in-charge.

Chair dining (FD -228, 279, 280, 281)

Removing of unsv / broken rear legs and providing/fixing new legs made out of 1st class hardwood teakwood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins duly french polishing chair dining completely all as shown on drg and as specified.

Removing of unsv / broken front legs and providing/fixing new legs made out of 1st class hardwood teakwood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins duly french polishing chair dining completely all as shown on drg and as specified.

Removing of unsv broken back rest and Providing/ fixing new back rest and duly french polishing chair dining completely all as shown on drg and as specified.

Removing of unsv/ broken stiffeners and providing/fixing new stiffner made out of 1st class hardwood teakwood and duly French polishing chair dining completely all as shown on drg and all as specified.

Removing of unsv/broken front/rear rails and providing/fixing with new front/rear rails made out of 1st class hardwood teakwood including drilling of Cane holes and duly french polishing chair dining completely all as shown on drg and all as specified.

Removing of unsv/broken side rails and providing/fixing with new side rail made out of 1st class hardwood teakwood including drilling of Cane holes and duly french polishing chair dining completely all as shown on drg and all as specified.

French polishing to the repaired chair dining in two coats after preperation of surfaces all as specified on drawing or as directed by Engineer-in-charge.

Recaning of repaired chair dining with best quality of approved plastic cane of white or cream ivory all as specified on drawing or as directed by Engineer-in-charge.

Chair Easy (FD - 229)

Removing of unsv / broken rear legs and providing/fixing new legs made out of 1st class hardwood teakwood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins and duly french polishing chair easy completely all as shown on drg and as specified.

Removing of unsv / broken front legs and providing new legs made out of 1st class hardwood teakwood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins and duly french polishing chair easy completely all as shown on drg and as specified.

Removing of unsv/broken arms rest and providing/fixing with new arm rest made out of 1st class hardwood teakwood duly shaped and duly french polishing chair easy completely as shown on drg and as specified.

Removing of unsv/broken frame of seat back frame and providing/ fixing with new frame made made to shape out of 1st class hardwood as per drg including drilling of cane holes @ 12.5 mm c/c for chair easy duly French polished all as shown on drg and as specified.

Removing of unsv/ broken front/rear rails and providing/ fixing with new rail made out of 1st class hardwood including drilling of cane holes and duly french polishing chair easy completely all as shown on drg and as specified.

Removing of unsv/broken side rails and providing/fixing with new rail made out of 1st class hardwood including drilling of Cane holes for chair Easy & duly French polishing completely all as shown on drg and all as specified.

French polishing to the repaired chair easy in two coats after preperation of surfaces all as specified on drawing or as directed by Engineer-in-charge.

Recaning of repaired chair easy with best quality of approved plastic cane of white or cream/ivory all as specified on drawing or as directed by Engineer-in-charge.

Bed with Plywood Top (FD - 246)

Removing of unsv plywood from head rest and providing/fixing new plywood 3.5mm thick one side teak veneered and teak wood beading all around for head rest of bed plywood duly french polished all as shown on drg and as specified.

Removing of unsv plywood from foot rest and providing/fixing new plywood 3.5mm thick one side teak veneered and teak wood beading all around for foot rest of bed plywood duly french polished all as shown on drg and as specified.

Removing of unsv/ broken long rail and providing/fixing new long rail made out of timber 1st class hard wood to bed plywood duly french polished all as shown on drg and as specified.

Removing of unsv/ broken Short rail and providing/fixing new short rail made out of timber 1st class hard wood to bed plywood duly french polished all as shown on drg and as specified.

Removing of unsv/broken plywood from bed and providing new plywood of commercial type 12mm thick 7 ply (MR Grade not less than Rs 100 per sqft) and conforming to IS 303 of 1975 to bed ply wood top and all as specified and shown on drg. Also brackets of specified shape & size to be provided at all four corners of the bed.

French polishing to the repaired Bed with Plywood Top in two coats after preperation of surfaces all as specified on drawing or as directed by Engineer-in-charge.

Stool Dressing (FD - 27, 252, 282)

Removing of unsv/ broken top long rail from frame of stool dressing and providing/fixing new long rail made out of 1st class hardwood teakwood rails including drilling of cane holes @ 12.5mm c/c.The loose joints tightened and glued with suitable bamboo pins & duly french polishing stool dressing completely all as specified and shown on drg

Removing of unsv/ broken top short rail from frame of stool dressing and providing/fixing new short rail made out of 1st class hardwood teakwood including drilling of cane holes @ 12.5mm c/c.The loose joints tightened and glued with suitable bamboo pins and duly french polishing stool dressing completely all as specified and shown on drg.

Removing of unsv/ broken leg from frame of stool dressing and providing/fixing new leg made out of 1st class hardwood teakwood and duly french polishing stoool dressing completely all as specified and shown on drg.

Removing of unsv/broken stiffner from frame of stool dressing and providing/fixing new stiffner made out of 1st class hardwood teakwood and duly french polishing stool dressing completely all as specified and shown on drg.

Removing of unsv hard rubber toes/ring from the bottom of legs and providing new rings of 4 Nos each.

French polishing to the repaired Stool Dressing in two coats after preperation of surfaces all as specified on drawing or as directed by Engineer-in-charge.

Table Dressing Ladies (FD-251, 378)

Removing of unsv/old defected mirror, unsv back plywood from mirror frame of table dressing ladies and providing new sheet glass electro-copper plated mirror 5 mm thick and new plywood of commercial type, MR Grade, 6 mm thick, 5 ply at the back side of mirror frame and fixing it to table dressing ladies and duly french polishing the frame all as directed and specified and shown on drg.

Removing of unsv/ chipped/old laminated sheet from the top, side & drawer face of table dressing Ladies and providing new laminated sheet of natural teak finish 1 mm thick on top, sides and drawer face and 1st class teak wood beading 4 mm thick provided to box of table dressing ladies all as directed and specified and shown on drg.

Removing of unsv/ broken plywood and providing new plywood of commercial type, MR Grade, 6 mm thick, 5 ply to the drawer bottom of table dressing ladies all as specified and shown on drg.

French polishing to the repaired Table Dressing Ladies in two coats after preperation of surfaces all as specified on drawing or as directed by Engineer-in-charge.

Table Dressing Gents (FD-31, 230, 231)

Removing of unsv/old defected mirror, unsv back plywood from mirror frame of table dressing gents and providing new sheet glass electro-copper plated mirror 5 mm thick and new plywood of commercial type, MR Grade, 6 mm thick, 5 ply at the back side of mirror frame and fixing it to table dressing gents and duly french polishing the frame all as directed and specified and shown on drg.

Removing of unsv/ chipped/old laminated sheet from the top, side & drawer face of table dressing gents and providing new laminated sheet of natural teak finish 1 mm thick on top, sides and drawer face and 1st class teak wood beading 4 mm thick provided to box of table dressing gents all as directed and specified and shown on drg.

Removing of unsv/ broken plywood and providing new plywood of commercial type, MR Grade, 6 mm thick, 5 ply to the drawer bottom of table dressing gents all as specified and shown on drg.

French polishing to the repaired Table Dressing Gents in two coats after preperation of surfaces all as specified on drawing or as directed by Engineer-in-charge.

Hat Stand with Mirror (FD- 23, 233)

Removing of unsv/old defected mirror and providing new sheet glass electro-copper plated mirror 5 mm thick and fixing to Hat stand including French polishing all as specified and shown on drg.

Removing of unsv/broken Plywood and providing new plywood of commercial type, MR Grade, 4 mm thick 3 ply to back of Hat stand all as shown on drg and specified.

French polishing to the repaired Hat Stand with Mirror in two coats after preperation of surfaces all as specified on drawing or as directed by Engineer-in-charge.

Table Bed Side (FD- 276)

Removing of unsv/ chipped/old prelaminted MDF board from top and providing new top made of pre laminated MDF board 18 mm to table bed side all as specified and shown on drg.

Removing of unsv/ broken Plywood from back of table bed side and providing new plywood of 6 mm thick commercial type MR Grade to the back of table bed side all as shown on drg.

Removing of unsv/broken prelaminated MDF board from side and providing new side made of MDF board 18 mm to table bed side all as shown on drg and as specified.

Removing of unsv/broken prelaminated MDF board from bottom and providing new bottom made of MDF board 19 mm to the table bed side all as shown on drg and as specified.

Removing of unsv shelf and providing new shelf made of prelaminated MDF board 18mm thick to table bed side all as shown on drg and as specified.

French polishing to the repaired Table Bed Side in two coats after preperation of surfaces all as specified on drawing or as directed by Engineer-in-charge.

Bin Soiled Linen (FD-15, FD - 244)

Removing of unsv/broken top Plywood and providing new plywood one side teak veneer 6 mm thick BWR grade and 4 mm thick teak wood beading to the top of bin soiled linen small including french polishing to repaired/ replaced parts all as specified and shown on drg.

Removing of unsv/broken front Plywood and providing new plywood one side teak veneer 6 mm thick BWR grade and 4 mm thick teak wood beading to the front of bin soiled linen small including french polishing to repaired/ replaced parts all as specified and shown on drg.

Removing of unsv/broken back Plywood and providing new plywood one side teak veneer 6 mm thick BWR grade and 4 mm thick teak wood beading to the back of bin soiled linen small including french polishing to repaired/ replaced parts all as specified and shown on drg.

Removing of unservicable leg frame from bin soiled linen & providing with new leg frame made out of 1st class hard wood teak & including french polishing complete all as specified and shown on drawing

French polishing to the repaired bin soiled linen in two coats after preparation of surfaces all as specified on drawing or as directed by Engineer-in-charge.

Book Case (FD-45/ 237)

Removing of unservicable top from book case & providind/fixing with new top made out of prelaminated MDF board 18mm thick all as specified and shown on drg.

Removing of unservicable side from book case & providind/fixing with new side made out of prelaminated MDF board 18mm thick all as specified and shown on drg.

Removing of unservicable shelf from book case & providind/fixing with new shelf made out of prelaminated MDF board 18mm thick all as specified and shown on drg.

Removing of unservicable shutter from book case & providind/fixing with new shutter made out of prelaminated MDF board 18mm thick all as specified and shown on drg.

Removing of unsv back plywood from book case & providing/fixing new plywood 6mm thick MR Grade & providing 4mm thick teak wood beading wherever necessary & french polishing completely

Removing of unservicable leg frame from book case & providing with new leg frame made out of 1st class hard wood teakwood & including french polishing complete all as specified and shown on drawing

French polishing to the repaired Book Case in two coats after preperation of surfaces all as specified on drawing or as directed by Engineer-in-charge.

Book shelf open large (DB- 4021)

Removing of unservicable top from book shelf open large & providing/fixing with new top made out of plywood 12mm thick MR grade all as specified and shown on drg.

Removing of unservicable side from book shelf open large & providing/fixing with new side made out of plywood 12mm thick MR grade all as specified and shown on drg.

Removing of unservicable shelf from book shelf open large & providing/fixing with new shelf made out of plywood 12mm thick MR grade all as specified and shown on drg.

Removing of unsv back plywood from book shelf open large & providing/fixing new plywood 6mm thick MR Grade & providing 4mm thick teak wood beading wherever necessary & french polishing completely

Removing of unservicable leg frame from book shelf open large & providing with new leg frame made out of 1st class hard wood teakwood & including french polishing complete all as specified and shown on drawing

French polishing to the repaired book shelf open large in two coats after preperation of surfaces all as specified on drawing or as directed by Engineer-in-charge.

Table dining 6 persons (FD- 30, 273, 337)

Replacement of unsv top of table dining 6 pers and providing new top made out of 18 mm thick pre laminated MDF board and 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

French polishing to the repaired Table dining 6 persons in two coats after preperation of surfaces all as specified on drawing or as directed by Engineer-in-charge.

Table dining 8 persons (FD-30 (M), 239, 273)

Replacement of unsv top of table dining 8 pers and providing new top made out of 18 mm thick pre laminated MDF board and 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

French polishing to the repaired Table dining 8 persons in two coats after preperation of surfaces all as specified on drawing or as directed by Engineer-in-charge.

Teapoy wooden (FD-34 (M), 232, 278, 382)

Replacement of unsv top of teapoy wooden and providing new top made out of 18 mm thick pre laminated MDF board and 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

French polishing to the repaired Teapoy wooden in two coats after preperation of surfaces all as specified on drawing or as directed by Engineer-in-charge.

Table centre (FD-225, 274)

Replacement of unsv top of Table center and providing new top made out of 18 mm thick pre laminated MDF board and 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

French polishing to the repaired Table Centre in two coats after preperation of surfaces all as specified on drawing or as directed by Engineer-in-charge.

Table peg (FD-25 (M), 236, 277, 384)

Replacement of unsv top of Table peg and providing new top made out of 18 mm thick pre laminated MDF board and 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

French polishing to the repaired Table Peg in two coats after preperation of surfaces all as specified on drawing or as directed by Engineer-in-charge.

Table writing (FD-33 (M), 275)

Replacement of unsv top of Table writing and providing new top made out of 18 mm thick pre laminated MDF board and 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

French polishing to the repaired Table writing in two coats after preperation of surfaces all as specified on drawing or as directed by Engineer-in-charge.

Table Computer (FD-E6/MAP/03)

Replacement of unsv top of Table computer and providing new top made out of 18 mm thick pre laminated MDF board and 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

Removing of unsv telescopic channel from key board of table computer and providing/fixing new telescopic channel (12"/16''/18'') as required of superior quality to key board of table computer all as specified and shown of drg.

Removing of unsv lock from drawer of table computer and providing/fixingnew multipurpose brass lock of superior quality with duplicate brass keys to drawer of table computer all as specified and shown on drg.

Almirah wooden large {(DB - 4116, FD - 21 (A)}

Removing of unsv/ broken Plywood from back of almirah wooden large and providing new plywood 6 mm thick commercial BWR grade to the back of almirah wooden large & duly french polished complete all as shown on drg and as specified.

Removing of unsv/ broken Plywood from front of almirah wooden large and providing new plywood 6 mm thick commercial BWR grade to the front of almirah wooden large & duly french polished complete all as shown on drg and as specified.

Removing of unsv/ broken Plywood from shelf of almirah wooden large and providing new plywood 18 mm thick commercial BWR grade shelf of almirah wooden large & duly french polished all as shown on drg and as specified

French polishing to the repaired almirah wooden large in two coats after preperation of surfaces all as specified on drawing or as directed by Engineer-in-charge.

Almirah wooden small (DB-4116, FD - 21 (A)

Removing of unsv/ broken Plywood from back of almirah wooden small and providing new plywood 6 mm thick commercial BWR grade to the back of almirah wooden smalll & duly french polishedcomplete all as shown on drg and as specified.

Removing of unsv/ broken Plywood from front of almirah wooden small and providing new plywood 6 mm thick commercial BWR grade to the front of almirah wooden small & duly french polished complete all as shown on drg and as specified.

Removing of unsv/ broken Plywood from shelf of almirah wooden small and providing new plywood 18 mm thick commercial BWR grade shelf of almirah wooden small & duly french polished complete all as shown on drg and as specified.

French polishing to the repaired almirah wooden small in two coats after preperation of surfaces all as specified on drawing or as directed by Engineer-in-charge.

Desk (FD - 107/ 1021)

Removing of unservicable top from desk & providing /fixing with new top made out of prelaminated MDF board 18mm thick all as specified and shown on drg.

Removing of unservicable bottom from desk & providing /fixing with new bottom made out of prelaminated MDF board 18mm thick all as specified and shown on drg.

Removing of unservicable side from desk & providing /fixing with new side made out of prelaminated MDF board 18mm thick all as specified and shown on drg.

Removing of unsv back plywood from desk & providing/fixing new plywood 6mm thick BWR grade & french polishing complete.

Mirror with shelf (FD - 52) TP

Removing of unsv Mirror with Shelf & providing new mirror with pvc moulded mirror with glass shelf with suitable bracket & as directed

Removing of unsv Mirror & plywood & providing new mirror of size 1500mmx600mmx5mm thick electro copper plated with 6 mm thick plywood back on mirror frame including french polish complete & as directed

Chair monoblock (CH - 17)

Removing of unservicable bucket(seat & back combine) of chair monoblock & providing new bucket(seat & back combine) & painting steel tube chair frame with one coat of synthetic enamel paint complete as specified and shown on drg.

Side Board (FD - 241)

Removing of unsv top from side board and providing new top made out of 18mm thick prelaminated MDF board & providing teak wood beading on front side, fixing to side board with glue and metal screws including french polishing completely all as specified and shown drg.

Removing of unsv side from side board and providing new side made out of 18mm thick prelaminated MDF board & providing teak wood beading on front side, fixing to side board with glue and metal screws including french polishing completely all as specified and shown drg.

Removing of unsv bottom from side board and providing new base made out of 18mm thick commercial plywood & providing teak wood beading on front side, fixing to side board with glue and metal screws including french polishing completely all as specified and shown drg.

Removing of unsv shutter from side board and providing new shutter made out of 18mm thick prelaminated MDF board & providing teak wood beading on front side including french polishing complete and fixing to side board with glue and metal screws all as specified and shown drg.

Removing of unsv drawer from side board and providing/fixing new drawer made out of prelaminated MDF board 12mm thick side & back and 18mm thick front wall, 6mm thick commercial plywood 5ply fixed to bottom including teak wood beading all around of drawer top with glue, nails and metal screws where necessary, one No chromium plated knob and french polishing completely to all wooden surfaces all as specified and shown on drg.

Removing of unsv back plywood from side board and providing new plywood commercial 6mm thick 5ply fixed to side board with glue and metal screws including french polishing complete to all wooden surfaces all as specified and shown on drg.

Removing of unsv shelf from side board and providing new shelf made out of 18mm thick prelaminated MDF board & providing teak wood beading on front side including french polishing complete and fixing to side board all as specified and shown drg.

Removing of unsv legs frame of side board from bottom and providing new legs frame made out of Indian seasoned teak wood including french polishing complete and fixed to bottom of side board with glue and metal screws all as directed and specified and shown on drg.

French polishing to the repaired Side Board in two coats after preperation of surfaces all as specified on drawing or as directed by Engineer-in-charge.

Trestle Store Room (wooden) (FD - 86, GE (k) SK- 9/82

Removing of unsv/ broken Plywood from back of trestle SR wooden and providing new plywood 6 mm thick commercial BWR grade to the back of trestle SR wooden & duly french polished complete all as shown on drg and as specified.

Removing of unsv/ broken Plywood from front of trestle SR wooden and providing new plywood 6 mm thick commercial BWR grade to the front of trestle SR wooden & duly french polished complete all as shown on drg and as specified.

Removing of unsv/ broken Plywood from shelf of trestle SR wooden and providing new plywood 18 mm thick commercial BWR grade shelf of trestle SR wooden & duly french polished all as shown on drg and as specified

Table 3'x 3' SM top wooden (FD - 88)

Removing unsv/broken Leg from table (3'x3') and providing new leg made out of 1st class hard wood indian seasoned teak wood and fixing of joint with glue and suitable bamboo pins duly french polish.

Removing unsv/broken long rail from table (3'x3') and providing new long rail made out of 1st class hard wood indian seasoned teak wood and fixing of joint with glue and suitable bamboo pins duly french polish.

Removing unsv/broken short rail from table (3'x3') and providing short rail made out of 1st class hard wood indian seasoned teak wood and fixing of joint with glue and suitable bamboo pins duly french polish.

Removing unsv/broken drawer from table (3'x3') and providing new drawer made out of 1st class hard wood indian seasoned teak wood and fixing of joint with glue and suitable bamboo pins duly french polish.

Removing unsv/broken stiffener from table (3'x3') longer and providing new stiffener longer made out of 1st class hard wood indian seasoned teak wood and fixing of joint with glue and suitable bamboo pins duly french polish.

Removing unsv/broken stiffener shorter from table (3'x3') and providing new stiffener shorter made out of 1st class hard wood indian seasoned teak wood and fixing of joint with glue and suitable bamboo pins duly french polish.

Replacement of unsv top of table wooden (3'x3') & providing new top made out of 18 mm thick pre laminated MDF board confirming to IS 3087-1985 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

Table writing OR's (3'x 2') (DB - 3958)

Replacement of unsv top of Table writing ORs & providing new top made out of 18 mm thick pre laminated MDF board confirming to IS 3087-1985 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

Removing unsv/broken drawer from table writing ORs and providing new drawer made out of 1st class hard wood indian seasoned teak wood and fixing of joint with glue and suitable bamboo pins duly french polish.

Removing unsv/broken stiffener longer from table writing ORs and providing new stiffener longer made out of 1st class hard wood indian seasoned teak wood and fixing of joint with glue and suitable bamboo pins duly french polish.

Removing unsv/broken stiffener shorter from table writing ORs and providing new stiffener shorter made out of 1st class hard wood indian seasoned teak wood and fixing of joint with glue and suitable bamboo pins duly french polish.

Table wooden (5'x 2'-10'') SM top (FD - 139)

Replacement of unsv top of table wooden (5'x 2'-10'') providing new top made out of 18 mm thick pre laminated MDF board confirming to IS 3087-1985 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

Removing unsv/broken stiffener longer from table wooden (5'x 2'-10'') and providing new stiffener longer made out of 1st class hard wood indian seasoned teak wood and fixing of joint with glue and suitable bamboo pins duly french polish.

Removing unsv/broken stiffener shorter from table wooden (5'x 2'-10'') and providing new stiffener shorter made out of 1st class hard wood indian seasoned teak wood and fixing of joint with glue and suitable bamboo pins duly french polish.

Table wooden (600 x 600 x 760 mm) SM top (FD _ 95)

Replacement of unsv top of table wooden (600 x 600 x 760mm) providing new top made out of 18 mm thick pre laminated MDF board confirming to IS 3087-1985 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

Removing unsv/broken stiffener longer from table wooden (600 x 600 x 760mm) and providing new stiffener longer made out of 1st class hard wood indian seasoned teak wood and fixing of joint with glue and suitable bamboo pins duly french polish.

Removing unsv/broken stiffener shorter from table wooden (600 x 600 x 760mm) and providing new stiffener shorter made out of 1st class hard wood indian seasoned teak wood and fixing of joint with glue and suitable bamboo pins duly french polish.

Table wooden (900 x 760 x 760 mm ) SM top (FD - 42, FD - 231)

Replacement of unsv top of table wooden (900 x 760 x 760mm) providing new top made out of 18 mm thick pre laminated MDF board confirming to IS 3087-1985 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

Removing unsv/broken stiffener longer from table wooden (900 x 760 x 760mm) and providing new stiffener longer made out of 1st class hard wood indian seasoned teak wood and fixing of joint with glue and suitable bamboo pins duly french polish.

Removing unsv/broken stiffener shorter from table wooden (900 x 760 x 760mm) and providing new stiffener shorter made out of 1st class hard wood indian seasoned teak wood and fixing of joint with glue and suitable bamboo pins duly french polish.

Table conference (FD - 08)

Removing unsv/broken Leg and providing new leg made out of 1st class hard wood indian seasoned teak wood and fixing of joint with glue and suitable bamboo pins duly french polish.

Removing unsv/broken rail and providing new rail made out of 1st class hard wood indian seasoned teak wood and fixing of joint with glue and suitable bamboo pins duly french polish.

Table top shall be 18mm thick prelaminated MDF board with 4mm thick beading alround shown as drawing No

Chair Dinning with cushion (FD/E6/MAP/10)

Removing unsv/broken Rear Leg and providing new legs made out of 1st class hard wood indian seasoned teak wood including tightening of seat frame and fixing of joint with glue and suitable bamboo pins duly french polish.

Removing unsv/broken front leg and providing new legs made out of 1st class hard wood indian seasoned teak wood including tightening of seat frame and fixing of joint with glue and suitable bamboo pins duly french polish.

Removing unsv/broken stiffner and providing new stiffners made out of 1st class hard wood indian seasoned teak wood including tightening of seat frame and fixing of joint with glue and suitable bamboo pins duly french polish.

Removing unsv/broken back rest and providing back made out of 1st class hard wood indian seasoned teak wood including tightening of seat frame and fixing of joint with glue and suitable bamboo pins duly french polish.

Removing and supply and fixing of the unserviceable cushion of chair dinning long back with cushion and providing new cushion 50mm thick 32 density & covered with new tapestry cloth costing not less than Rs. 250/- per RM over the white kora cloth duly stiched to chair dinning long back with cushion as per drawing.

Stool dressing with cushion (FDE6/MAP/14)

Supply and fixing of unserviceable cushion sheet 32 density duly covered with leatherite uphostering of quality and top shall be 12mm thick phenal bonded plywood.

Removing unsv/broken Leg and providing new leg made out of 1st class hard wood indian seasoned teak wood and fixing of joint with glue and suitable bamboo pins duly french polish.

Removing unsv/broken rail and providing new rail made out of 1st class hard wood indian seasoned teak wood and fixing of joint with glue and suitable bamboo pins duly french polish.

Preparation wooden surfaces by rubbing with sandpaper and applying one coat of french polish .

Trolley for TV (FD/E6/MAP/04)

Removing of unsv/broken glass shutter from TV Trolley and providing/fixing new sliding door shutter(double leaf)made out of acrylic transparent sheet 5mm thick fixing with two way aluminium channel 1mm thick all round including two Nos runner wheels and one Nos chromium plated knob to each shutter as directed by the Engr-in-Charge. All as shown in drg No FD/E6/MAP/04

Removing of unsv/broken bottom from TV Trolley and providing new bottom made out of 18mm thick prelaminated MDF board exterior grade fixing with glue and metal screws to TV Trolley as directed by Engr-in-Charge as specified and shown on drg No FD/E6/MAP/04.

Removing of unsv/broken top from TV Trolley and providing new top made out of 18mm thick prelaminated MDF board exterior grade fixing with glue and metal screws to TV Trolley as directed by Engr-in-Charge as specified and shown on drg No FD/E6/MAP/04.

Removing of unsv/broken side from TV Trolley and providing new side made out of 18mm thick prelaminated MDF board exterior grade fixing with glue and metal screws to TV Trolley as directed by Engr-in-Charge as specified and shown on drg No FD/E6/MAP/04.

Removing of unsv/broken back from TV Trolley and providing new back made out of 18mm thick prelaminated MDF board exterior grade fixing with glue and metal screws to TV Trolley as directed by Engr-in-Charge as specified and shown on drg No FD/E6/MAP/04.

Removing of unsv/broken castors from TV Trolley and providing/fixing new castorsall as shown in drg No FD/E6/MAP/04.

Workshop bench (various types & sizes) FD-42/43, GE (k) FD - 37/86/67/90 FD-89/91/145 (M)

Removing of unsv/broken hardwood from back of workshop bench and providing new back made out of 1st class hardwood teakwood with tightening the frame and fixing the joints as specified in drg

Removing of unsv/broken hardwood from top of workshop bench and providing new top made out of 1st class hardwood teakwood with tightening the frame and fixing the joints as specified in drg

Removing of unsv/broken hardwood from front of workshop bench and providing new front frame made out of 1st class hardwood teakwood with tightening the frame and fixing the joints as specified in drg

Removing of unsv/broken hardwood from long rail frame of workshop bench and providing new long rail frame made out of 1st class hardwood teakwood with tightening the frame and fixing the joints as specified in drg

Removing of unsv/broken hardwood from legs of workshop bench and providing new legs made out of 1st class hardwood teakwood with tightening the frame and fixing the joints as specified in drg

Removing of unsv/broken plywood from drawer of workshop bench and providing new drawer made out of 1st class hardwood teakwood with tightening the frame and fixing the joints as specified in drg

Workstation for computer (DNC - 771/772/773/774/775 GE (NW) FD - 71/90. GE (NW) FD - 171/174

Removing of unsv/broken particle board from back of workstation and providing new back made out of prelaminated MDF board 18mm thick shade as required to match the previous shade with tightening the frame as specified

Removing of unsv/broken particle board from top of workstation and providing new top made out of prelaminated MDF board 18mm thick shade as required to match the previous shade with tightening the frame as specified

Removing of unsv/broken particle board from side of workstation and providing new side made out of prelaminated MDF board 18mm thick shade as required to match the previous shade with tightening the frame as specified

Removing of unsv/broken particle board from drawer of workstation and providing new drawer made out of prelaminated MDF board 18mm thick shade as required to match the previous shade with tightening the frame as specified

Mahesh Traders

REETA ENTERPRISES

shubham construction

M/s Raghav Traders

SHREE JAGDISH FURNITURE CO.