Loading…
Loading…
Tender Value
₹99,000
EMD Value
₹2,970
Closing Date
30 Jul 2026, 3:00 pm4d left
EXECUTIVE ENGINEER REW KUPWARA
EXECUTIVE ENGINEER REW KUPWARA
Construction of Bathroom at Masjid Shareef Dar Mohalla W1 at Awoora B
2026_RDPR_317078_9
NIT NO 70 OF 2026-27 ADF QADERABAD
Open Tender
Civil Works
Percentage
EXECUTIVE ENGINEER REW KUPWARA
Please refer Tender documents.
2 documents required · 2 mandatory
₹200
EXECUTIVE ENGINEER REW KUPWARA
₹2,970
21 Jul 2026
21 Jul 2026
30 Jul 2026
21 Jul 2026
30 Jul 2026
21 Jul 2026
21 Jul 2026 - 21 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation in foundation trenches drains (not exceeding 1.5 m in width as well as 10 Sqm in plan ) including dressing of slides and ramming of bottoms, lift up to 1.50 m including getting out the excavated soil and disposal of surplus excavated soil as directed. | 5.99 | cum | 479.3 | ₹2,871.01 |
| 2 | Providing and laying of stone soling hand packed incl supply & carriage by MT 10Kms | 0.69 | cum | 1,000 | ₹690 |
| 3 | Providing and laying inposition cement concrete of M10 grade with 20 mm thick NSA (crushed aggregate) including cost of cement but excluding cost of centering and shuttering | 2.89 | cum | 5,733.6 | ₹16,570.1 |
| 4 | Brick work IN CONCRETE Hollow Block Masonry of block size 16"x8"x8" in foundation and plinth including curing in cement mortar 1:6 mix incl all carraiages | 2.39 | cum | 7,500 | ₹17,925 |
| 5 | Providing and laying of dry R.R Masonry in soak pit using nallah stone without bond stone | 2.11 | cum | 2,793.8 | ₹5,894.92 |
| 6 | Carriage of Stones by MT 15Kms | 2.11 | cum | 349.42 | ₹737.28 |
| 7 | Providing and laying of R.C.C Slab in 1:2:4 nominal mix using 20mm thick NSA (crushed aggregates) | 1.09 | cum | 7,104.35 | ₹7,743.74 |
| 8 | P/F of reinforcement steel in R.C.C Slab incl straightening, cutting, bending, binding, placing in position all complete job | 1.09 | qtl | 11,335 | ₹12,355.15 |
| 9 | Providing & fixing 40mmx40mmx5mm Angle Iron Frames & Shutters of 35mmx35mm x4mm Angle iron With CGI sheet fixed with flats ( with metallic primer over it) | 1 | Na | 0.01 | ₹0.01 |
| 10 | Door Frame with Shutters | 1 | No | 3,500 | ₹3,500 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.26 MB
BOQ_1037413.xls
BOQ • 0.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].