GE/AFU-42/2024-25 REPAI / MAINT OF CENTRIFUGAL PUMP / SUBMERSIBLE PUMP, SERVICING OF OZONE PLANT, MAINT OF SWIMMING POOL / CHLORONOME PLANT INCLUDING REPAIR / REPLACEMENT OF FIRE PUMP, FIRE HYDRANT AND PRESSURE SWITCH ALONGWIT

Amount

Dismantling / taking out Bore well (Lowering & Lifting) of submersible pump or motor 15 HP to 20 HP 3 phase, 415 volts, 50HZ, AC from the bore well to contractor's work shop, dismantling for carrying out necessary repairs / renewal of parts of motors or pump and reassembling complete motors / pump sets & depositing the same after necessary repair to site complete all as directed. Note:- (i) New spares/parts shall be measured & paid separately under appropriate items listed here-in-after. (ii) Quoted rate shall be deemed included of transporting, taking up & down overhauling complete.

Supply only in repair Submersible pump of capacity 15 / 20 HP and rewinding the motor of capacity 15/20 HP with super enameled copper conductor of standard size including varnish, insulation paper and soldering of connection etc. Assembly of motor with pump set with necessary studs, bolts, washers etc complete with all connection all as specified and directed. Make of wire : ALTAS / HTP / DEVI DAYAL

Supply only in replacement thrust bearing complete for submersible motor

Replacement / Renewal only of worn out gun metal bushes for submersible motor as per manufacturer's design

Supply only in replacement of PVC sheathed and PVC insulated, flat, copper conductor submersible cable 3 core of 10 sqmm size, 8 mtr long complete with suitable clips.

Supply only sleeves of end plates of submersible motor.

Supply only water seal

Supply only coupling of submersible motor and pump with key

Supply only in repair of broken PUMP shaft with new piece, making key slot, grinding to make coupling size, and balancing the rotor

Supply only GI coloum pipe 80mm bore medium grade 3 / 6 RM long with flange, gasket nut, bolts and washers etc complete all as specified and directed.

Complete overhauling of submersible pump by carrying out, balancing of pump shaft and cutting of key slots, repairs to bowl assembly and provding over size studs with nuts complete all as specified and directed. Note:- (i) New spares/parts shall be measured & paid separately under appropriate items listed here-in-after.

Supply only bowl bushes complete

Supply only neck ring complete

Supply only impellor gun metal as per existing

Supply only cast iron, bowl

Supply only CI, non return valve of required dia

Jointing of 3 core cable of any size by using puncture / rubber compound roll & tape / Sealing compound

Dismantling / taking out of Complete removal of old painted surfaces of motor and pump set and applying two coat of synthetic enamel paint (1st quality) over a coat of metal primer (hammer tone finish) all as specified. Note:- Painting shall be done by spray machine.

Dismantling / taking out Bore well (Lowering & Lifting) of submersible pump or motor 5 HP to 7.5 HP 3 phase, 415 volts, 50HZ, AC from the bore well to contractor's work shop, dismantling for carrying out necessary repairs / renewal of parts of motors or pump and reassembling complete motors / pump sets & depositing the same after necessary repair to site complete all as directed. Note:- (i) New spares/parts shall be measured & paid separately under appropriate items listed here-in-after. (ii) Quoted rate shall be deemed included of transporting, taking up & down overhauling complete.

Rewinding the motor of capacity 7.5 HP with super enameled copper conductor of standard size including varnish, insulation paper and soldering of connection etc. Assembly of motor with pump set with necessary studs, bolts, washers etc complete with all connection all as specified and directed. Make of wire : ALTAS / HTP / DEVI DAYAL

Supply only in replacement of thrust bearing as per existing size complete for submersible motor make

Replacement / Renewal worn out gun metal bushes for submersible motor as per manufacturer's design and specification.

Supply & fixed in repair PVC sheathed and PVC insulated, flat, copper conductor submersible cable 3 core of 6 sqmm size, 8 mtr long complete with suitable clips all as specified.

Supply only sleeves of end plates of submersible motor.

Supply only water seal

Supply only studs with nuts of required length & dia

Supply only coupling of submersible & pump with key motor complete

Supply only GI coloum pipe 50mm bore medium grade 3 / 6 RM long with flange, gasket nut bolts and washers etc complete.

Complete over hauling of submersible pump by carrying out, balancing of pump shaft and cutting of key slots, repairs to bowl assembly, rethreading of wornout studs holes and provding over size studs with nuts complete all as specified and directed. Note:- (i) New spares/parts shall be measured & paid separately under appropriate items listed here-in-after.

Supply only bowl bushes

Supply only neck ring

Supply only impellor gun metal as per existing

Supply only cast iron bowl assembly

Supply only CI non return valve of required dia

Jointing of 3 core cable of any size by using puncture / rubber compound roll & tape / Sealing compound complete

Dismantling / taking out of Complete removal of old painted surfaces of motor and pump set and applying two coat of synthetic enamel paint (1st quality) over a coat of metal primer (hammer tone finish) all as specified. Note:- Painting shall be done by spray machine.

Dismantling / taking out of Centrifugal pump set - 30HP to 40HP, AC, 3 phase, 415 V AC from pump house at any location / Yard transporting to contractor's work shop, dismantling for carrying out necessary repais / renewal of parts of pump and depositing the same after repair, reassembling complete to site all as directed. Note:- (i) New spares/parts shall be measured & paid separately under appropriate items listed here-in-after. (ii) Quoted rate shall be deemed included of transporting, overhauling complete.

Cutting out the existing winding of the motor, opening of winding, re winding of motor with same size of winding wire as existing including varnishing, drying and making connection complete all as specified

Supply only driven end bearing of pump shaft

Supply only gun metal / stainless steel bush of pump shaft

Supply only non driven end bearing of pump shaft

Supply only of gland packing

Supply only cooling fan

Supply only CI impeller of similar make as directed

Supply only connection flanges per site required

Supply only coupling with studs between motor & pump

Supply only sleeve of motor's as per existing size complete all as directed

Re-metaling of pump shaft, turning for bring it to Internal dia size of bearing in rear end cover complete all as directed

Supply only driven end bearing of motor shaft

Supply only non driven end bearing of motor shaft.

Dismantling / taking out of Complete removal of old painted surfaces of pump set size 30HP to 40HP and applying two coat of synthetic enamel paint (1st quality) over a coat of metal primer (hammer tone finish) all as specified. Note:- Painting shall be done by spray machine.

Dismantling / taking out of Centrifugal / Monoblock pump / motor set 15HP - 20 HP , 3 phase, 415 V AC from pump house at any location/Yard transporting to contractor's work shop, dismantling for carrying out necessary repais / renewal of parts of pump and depositing the same after repair, reassembling complete to site all as directed. Note:- (i) New spares / parts shall be measured & paid separately under appropriate items listed here-in-after. (ii) Quoted rate shall be deemed included of transporting, overhauling complete.

Cutting out the existing winding of the motor, opening of winding, re winding of motor with same size of winding wire as existing including varnishing, drying and making connection complete all as specified

Supply only driven end bearing of pump shaft

Supply only gun metal / stainless steel bush of pump shaft

Supply only non driven end bearing of pump shaft

Supply only of gland packing

Supply only cooling fan

Supply only CI impeller of similar make as directed

Supply only connection flanges per site required

Supply only coupling with studs between motor & pump

Supply only sleeve of motor's as per existing size complete all as directed

Supply only Neck ring

Supply only driven end bearing suitable of pump set of motor shaft

Supply only non driven end bearing suitable of pump set of motor shaft.

Dismantling / taking out of Complete removal of old painted surfaces of pump set size 15 HP - 20HP and applying two coat of synthetic enamel paint (1st quality) over a coat of metal primer (hammer tone finish) all as specified. Note:- Painting shall be done by spray machine.

Dismantling / taking out of Centrifugal / Monoblock pump / motor set - 10 HP - 12.5 HP , 3 phase, 415 V AC from pump house at any location / Yard transporting to contractor's work shop, dismantling for carrying out necessary repais / renewal of parts of pump and depositing the same after repair, reassembling complete to site all as directed. Note:- (i) New spares/parts shall be measured & paid separately under appropriate items listed here-in-after. (ii) Quoted rate shall be deemed included of transporting, overhauling complete.

Cutting out the existing winding of the motor, opening of winding, re winding of motor with same size of winding wire as existing including varnishing, drying and making connection complete all as specified

Supply only driven end bearing of pump shaft

Supply only gun metal / stainless steel bush of pump shaft

Supply only non driven end bearing of pump shaft

Supply only of gland packing

Supply only cooling fan

Supply only CI impeller of similar make as directed

Supply only connection flanges per site required

Supply only coupling with studs between motor & pump

Supply only sleeve of motor's as per existing size complete all as directed

Supply only Neck ring

Supply only driven end bearing suitable of pump set of motor shaft

Supply only non driven end bearing suitable of pump set of motor shaft.

Dismantling / taking out of Complete removal of old painted surfaces of pump set size 10 HP - 12.5 HP and applying two coat of synthetic enamel paint (1st quality) over a coat of metal primer (hammer tone finish) all as specified. Note:- Painting shall be done by spray machine.

Supply and fixed in repairs Single Phase Preventor Relay all as specified and directed. Make: ( L&T / Minilac / C&S)

Dismantling and taking out faulty analog type Ammeter from LT panel and supply and fixing three phase Ammeter digital type upto 0 to 100 Amps with suitable CT's ratio of size 96 mm x 96 mm of MPR 200nx any range as required at site including necessary control wire connection and testing complete all as specified and directed. Make: L&T / C&S / AE / Secure

Supply and fixed in repair star delta starter complete set with suitable size for cable connection between starter to motor & panel suitable for 7.5 HP, 3 Phase, 415 V electric motor including necessary connection and fixed on stand made out of angle iron 40 X 40 X 4 mm size complete all as specified and directed. Make: L&T / C&S / Bharat Cutler Hammer / Maxwell / Jyoti.

Supply and fixed in repair star delta starter complete set with suitable size for cable connection between starter to motor & panel suitable for 20 HP, 3 Phase, 415 V electric motor including necessary connection and fixed on stand made out of angle iron 40 X 40 X 4 mm size complete all as specified and directed. Make: L&T / C&S / Bharat Cutler Hammer / Maxwell / Jyoti.

Supply and fixed in repair change over switch 100 Amps, 415 volts, 4 pole, front handle type as per site requirement complete with suitable size cable for connection complete all specified and directed. Make: L&T / C&S / Bharat Cutler Hammer / Maxwell / Jyoti.

Supply and fixed in repair change over switch 63 Amps, 415 volts, 4 pole, front handle type as per site requirement complete with suitable size cable for connection complete all specified and directed. Make: L&T / C&S / Bharat Cutler Hammer / Maxwell / Jyoti.

Supply and fixed in repairs Contactor ML-3, 3 pole, 415 Volts ,22 Amps rating including necessary electrical connection all as specified. Make:- L&T / C&S / ABB

Supply and fixed in repairs Contactor ML-2, 3 pole, 415 Volts, 32 Amps rating including necessary electrical connection all as specified. Make:- L&T / C&S / ABB

Supply and fixed in repairs Contactor ML-3, 3 pole, 415 Volts ,40 Amps rating including necessary electrical connection all as specified. Make:- L&T / C&S / ABB

Supply & fix in repair electronic control timer 3 phase, 50HZ type ET-100 , 3-30 sec and 12-120 sec as per requirment of suitable capacity as required at site. Make:- L&T / ABB / Legrand / AE / Secure.

Supply & fix in repair engine starter relay of suitable capacity as required at site as per sample . Make:- L&T / Havells / ABB / Legrand / AE / Secure.

S & F in repair of submersible flat copper stranded cable 1100 Volt grade of size 10 sqmm 3 core complete including taking down all as specified and directed.

S & F in repair of submersible flat copper stranded cable 1100 Volt grade of size 6 sqmm 3 core complete including taking down all as specified and directed.

S & F in repair connecting, testing and commissioning fixed type rupturing capacity MCCB 25 to 100 Amps , 3 pole , 415 Volts, 16 KA, 50 Hz including spreader terminals complete all as specified and directed.

S & F in repair connecting, testing and commissioning fixed type rupturing capacity MCCB 125 Amps , 4 pole , 415 Volts, 16 KA, 50 Hz including spreader terminals complete all as specified and directed.

S & F in repair connecting, testing and commissioning fixed type rupturing capacity MCCB 160 Amps , 4 pole , 415 Volts, 36 KA, 50 Hz including spreader terminals complete all as specified and directed.

S & F in repair MCCB 250 Amps, 415 volts AC 50Hz, 4 pole, bracking capacity 36 KA adjustable type thermal magnatic setting, Ics=100% Icu @ with suitable size of sheet metal enclosure including taking down complete all as specified and as directed.

S & F (in repair) rubber gasket 3 mm thick (packing ring) suitable for 50 bore flange lowering pipe cut type complete all as specified and directed.

S & F (in repair) rubber gasket 3 mm thick (packing ring) suitable for 80 bore flange lowering pipe cut type complete all as specified and directed.

Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundations of poles, laying of cables, pipes etc. and getting out including trimming the sides and forming bottom surfaces to required levels in soft / loose soil complete all as specified and directed.

Removing excavated material ( soils) not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified.

Returning, filling in, including spreading, levelling, and well ramming in layer not exceeding 25 cm thick in soft / loose soil complete all as specified and directed.

S & F in repair galvanised mild steel pipe / tubing, 80 mm bore dia, light grade complete with all fittings, laid in trenches / under roads, drain, paths, fixed to poles / walls with Mild steel clamps , bolts , nuts and washers complete all as specified. Note:- Excavation & Earth work, mild steel clamps, bolts , nuts and washers shall be measured and paid separately.

S & F in repair galvanised mild steel pipe / tubing, 40 mm bore dia, light grade complete with all fittings, laid in trenches / under roads, drain, paths, fixed to poles / walls with Mild steel clamps, bolts , nuts and washers complete all as specified. Note:- Excavation & Earth work, mild steel clamps, bolts , nuts and washers shall be measured and paid separately.

Repair / Rewinding of monoblock pump ( Booster pump / Pressure pump) or motor set of cap 0.5 - 03 HP single phase 230 Volts ,with super enamelled copper conductor of standard size including varnish, insulation paper and tape including, replacement of unserviceable bush, and replacement to unserviceable bronge empallor as per site requirement complete all as specified and directed by Engr-in-Charge.

Repair / Rewinding of monoblock pump ( Booster pump) or motor set of cap 05 - 7.5 HP single phase 230 Volts , with super enamelled copper conductor of standard size including varnish, insulation paper and tape including, replacement of unserviceable bush, and replacement to unserviceable bronge empallor as per site requirement complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair gland packing for sluice valve of size 150 / 200 mm dia

Supply and fix in repair gland packing for sluice valve of size 100 / 80 mm dia

S & F Brass ball valve / float valve in replacement of PVC float valve / ball valve high pressure with polythene float and fly nut complete screwed with iron pipe or brass ferrule and fixed complete all as specified and directed by Engr-in-Charge of the following sizes of make Prayag / Symet.

15 mm dia

20 mm dia

25 mm dia

Demolition of existing old unserviceable brick masonary valve chamber including demolition of unserviceable M.S iron cover and iron frame and construction of new valve chamber 900x900x900 cm inner dimensions, brick masonary in cm 1:4 PCC base in 1:3:6 of 7.5 cm thick & plastering 15 cm thick in CM 1:4 in inner side/copping of all chamber fabrications of Iron frame 40x40x6 mm size angle iron MS cover 3 mm thick with hinges and locking arrangements duly painted excavation,earth work complete all as specified and directed by Engr-in-Charge .

All as per item No. 35 here in before but size of pit 1200x1200x1200 cms with suitable MS cover and angle iron frame complete all as specified and directed by Engr-in-Charge .

M & L in replacement of Cast iron Butterfly Valve , lever operated, Nitrile / EPDM Rubber lining test pressure PN 1.6 ISI markedof size 200mm dia including welding work all fittings such as nuts , bolts, washers and rubber gasket etc complete in all respect all as specified.

M & L in replacement of Cast iron Butterfly Valve , lever operated, Nitrile / EPDM Rubber lining test pressure PN 1.6 ISI markedof size 150mm dia including welding work all fittings such as nuts , bolts, washers and rubber gasket etc complete in all respect all as specified.

M & L in replacement of Cast iron Butterfly valve, lever operated, Nitrile /EPDM Rubber lining test pressure PN 1.6 ISI markedof size 100mm dia including welding work all fittings such as nuts , bolts, washers and rubber gasket etc complete in all respect all as specified.

M & L in replacement of Cast iron Butterfly valve, lever operated, Nitrile / EPDM Rubber lining test pressure PN 1.6 ISI markedof size 80mm dia including all fittings such as nuts , bolts, washers/ welding work and rubber gasket etc complete in all respect all as specified.

M & L in replacement of Cast iron Butterfly valve, lever operated, Nitrile / EPDM Rubber lining test pressure PN 1.6 ISI markedof size 65 mm dia including welding work all fittings such as nuts , bolts, washers and rubber gasket etc complete in all respect all as specified.

M & L in replacement of Cast iron Butterfly valve, lever operated, Nitrile / EPDM Rubber lining test pressure PN 1.6 ISI markedof size 50 mm dia including welding work all fittings such as nuts , bolts, washers and rubber gasket etc complete in all respect all as specified.

M & L in replacement of cast iron sluice valve ISI marked 80 mm dia class PN 1.6 flanged with gun metal spindle including all fittings such as nuts , bolts, washers tec with iron wheel confirming to IS: 780 / 14846 complete in all respect all as specified.

M & L in replacement of cast iron sluice valve ISI marked 100mm dia class PN 1.6 flanged with gun metal spindle including all fittings such as nuts , bolts, washers tec with iron wheel confirming to IS: 780 / 14846 complete in all respect all as specified.

M & L in replacement of cast iron sluice valve ISI marked 150mm dia class PN 1.6 flanged with gun metal spindle including all fittings such as nuts , bolts, washers tec with iron wheel confirming to IS: 780 / 14846 complete in all respect all as specified.

M & L in replacement of cast iron sluice valve ISI marked 200mm dia class PN 1.6 flanged with gun metal spindle including all fittings such as nuts , bolts, washers tec with iron wheel confirming to IS: 780 / 14846 complete in all respect all as specified.

Dismantling / Taking out old unsv 100mm NRV and S & F CI reflux valve (non return valve ISI 5312) of size 100 mm bore , heavy duty both end flanged of pressure rating PN- 1.6 and joint with rubber or biber board gasket complate with fixing accessories like nut, bolt, washers, packing etc and all as specified and directed by Engr-in-Charge.

Dismantling / Taking out old unsv 80mm NRV and S & F CI reflux valve (non return valve ISI 5312) of size 80 mm bore , heavy duty both end flanged of pressure rating PN- 1.6 and joint with rubber or biber board gasket complate with fixing accessories like nut, bolt, washers, packing etc and all as specified and directed by Engr-in-Charge.

Dismantling / Taking out old unsv 50mm NRV and S & F CI reflux valve (non return valve ISI 5312) of size 50 mm bore , heavy duty both end flanged of pressure rating PN- 1.6 and joint with rubber or biber board gasket complate with fixing accessories like nut, bolt, washers, packing etc and all as specified and directed by Engr-in-Charge.

Disconnecting / removing of existing tanks of capacity upto 500 Ltrs setting aside (for lowering if required) and cleaning of all scaling and dirt etc with bleaching powder and making it germ free including hoisting, reconnecting and refixing in position and writting date of cleaning and next due date with white paint complete all as directed by Engr-in-charge.

Disconnecting / removing of existing tanks of capacity 500 Ltrs to 1000 Ltrs setting aside (for lowering if required) and cleaning of all scaling and dirt etc with bleaching powder and making it germ free including hoisting, reconnecting and refixing in position and writting date of cleaning and next due date with white paint complete all as directed by Engr-in-charge.

Disconnecting / removing of existing tanks of size 2000 Ltrs setting aside (for lowering if required) and cleaning of all scaling and dirt etc with bleaching powder and making it germ free including hoisting, reconnecting and refixing in position and writting date of cleaning and next due date with white paint complete all as directed by Engr-in-charge.

M & L for dismantling old unserviceable tank in replacement of new Rotational moulded polyethylene water storage tanks of capacity 500 ltrs three layered (Cylindrical vertical with closed top) hoisted and fixed in position including ball cock brass of size 20mm dia with polythene ball and inlet, outlet including wash out with plug/over flow pipe and anti mosquito rose coupling at one end all as specified in SSR Pt-I complete all as specified and as directed .

M & L for dismantling old unserviceable tank in replacement of new Rotational moulded polyethylene water storage tanks of capacity 1000 ltrs three layered (Cylindrical vertical with closed top) hoisted and fixed in position including ball cock brass of size 20mm dia with polythene ball and inlet, outlet including wash out with plug/over flow pipe and anti mosquito rose coupling at one end all as specified in SSR Pt-I complete all as specified and as directed.

M & L for dismantling old unserviceable tank in replacement of new Rotational moulded polyethylene water storage tanks of capacity 2000 ltrs three layered (Cylindrical vertical with closed top) hoisted and fixed in position including ball cock brass of size 20mm dia with polythene ball and inlet, outlet including wash out with plug/over flow pipe and anti mosquito rose coupling at one end all as specified in SSR Pt-I complete all as specified and as directed.

S&F in repair PVC insulated multistranded with 6 runs of 16 sqmm copper conductor cable including PVC rigid conduit and its accesosories from motor to starter fixed on surface of wall / ceiling / floor complete all as specified and directed.

S & F in repair new CI foot valve 150 mm dia flanged pipe with necessary bolts and nuts, washer all fixing arrangement etc complete all as specified and directed.

S & F in repair new CI foot valve 100 mm dia flanged pipe with necessary bolts and nuts, washer all fixing arrangement etc complete all as specified and directed .

S & F in repair new CI foot valve 80 mm dia flanged pipe with necessary bolts and nuts, washer all fixing arrangement etc complete all as specified and directed.

S & F in repair new brass foot valve 50 mm dia flanged pipe with necessary bolts and nuts, washer all fixing arrangement etc complete all as specified and directed.

Repair / Servicing with testing complete of existing digital water level indication device, operating on single phase supply direct display in 19 mm size digit system in meter/cubic meter of water of over head tank ensuring alarm while water fall or rise over predetermined limit including taking down unserviceable one with the following description: (a) The entire unit must operate through a compact electronic circuit which must ensure reliable operation at 230 V+ 10% at 50 HZ + 5% with readable in digit display and alarm at low and high level of UG sump. (b) One circuit must be housed in high impact polystyrene moulded box with nylon moulded connections strips. The level system must be resistance / transducer type and resistive to corrosion and other contents available in water. (c) The whole unit must be controlled electronically and the upper level and lower level indications must be transmitted through highly sensitive micro switch. The complete unit must be in two parts. Each complete part must be fitted in MS sheet box separately. One must be installed at UG sump / OH tank and second at pump House with proper powder coating paint with locking arrangements. Note: Quoted rate shall be deemed included of transporting, overhauling and replacement of spares parts complete.

S & F in repair flexible copper cable 4sqmm 4 core size from sump / over head tank to pump house for connecting the both units of water level indicator and passing through PVC flexible / rigid conduit and fixing on walls wherever required complete all as specified and as directed.

S& F in repair pressure guage complete with suitable size of connecting pipe and taps etc of range 10 to14 Kg/cm2 inlcuding removing the existing unserviceable pressure guage complete with connecting pipes, taps hole in the pumping line of any size all as directed.

Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit ndot less than 2.25 mtrs deep below ground level) with top edge of the earth plate at a depth of not less than 1.5 mtr below ground level connected to galvanized iron strip 25 x 4 mm as earthing lead by means of bolts, nuts and washers made out of GI / steel earth strip protected by GI light grade pipe of 40 mm dia and connecting to main panel board / switch board / control board all shown in electrical plate No 3 of SSR Pt I incl PCC chambers in 1:2:4 and RCC cover slab with 8mm dia MS bars reinforced at 10 cm center to center both ways incl earth work like excavation, returning filling back disposal etc complete.

M & L Galvanised iron strip 25 x4 mm with saddles and fixing screws etc,for roof conductors and down conductors above ground, complete all as specified and as directed .

S & F in repair MCB DB single pole with neutral sheet metal enclosure double door type, 240V,of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated , powder coated complete with out MCB and with enclosure blank plates for unused way suitable for 02 way complete all as specified and directed by Engr-in-charge. Make : Legrand / L&T / Schneider.

S & F in repair MCB single pole & neutral 20 Amp rating 'C' Series 240 Volt complete all as specified and directed by Engr-in-charge. Make : Legrand / L&T / Schneider.

S & F in repair PVC insulated & sheathed , heavy duty electric cable on RCC Piller / Dome of over head tank at hight of 26 meter approximatelly from normal ground level incluiding fixing arrangement with Copper conductor,multi stranded 1100 volts grade Flate 3 core 04 Sqmm and taking out of existing unserviceable cable complete all as specified and directed by Engr-in-charge. Make : Havells / Plaza / Rallison / Nicco / National / Finolex

Rutine Maintenance / Servicing / Repairing / Cleaning works Automatic chlorine dosing system with pump any model any capacity along with components complete set (Hypo Chlorine chemical dosing System incl chemical supply line & injection points & power of motors panels are integrated with Electronic solenoid operated pumps, interconnecting tubing / piping, mixing tank 100 ltrs with mixture / agitator-2 Nos & injector -2 Nos with instruments like pressure gauge, pressure switch, pressure transmitter, ORP Sensor, Chlorine sensor , PPM valve display , NRV, duly mounted on structure frame with Agitator support, incl suction and drain out connection with valve incl welding and the following works / maintenance carried out this scope work and replacement of unserviceable parts paid include mentioned and complete all as specified and directed Engr-in-Charge . Note:- All the items ratees Quoted are inclusive of the cost, all items testing and commissioning existing company rap. (Location : PHASE - I, PHASE - II, UPPER CAMP P/ HOUSE and SWIMMING POOL)

Supply only discharge valve assy complete of dosing plant as per sample complete all as specifed and directed.

Supply only NRV assy complete of dosing plant as per sample complete all as specifed and directed.

Supply only push bottom ( ON OFF ) switch assy complete of dosing plant as per sample complete all as specifed and directed.

Supply only Teflon pipe complete of dosing plant as per sample complete all as specifed and directed.

Supply only impeller of agitator blade complete of dosing plant as per sample complete all as specifed and directed.

Routine Maintenance / Servicing / Repairing and testing of water treatment Ozone plant of capcity 30000 LPH to remove pesticides residues, dirt , dust, silt , sand, insects, fibres, ordour, colour and other oraganic matters etc with treatment media , back wash system with multiport values distribution / strainer system, having the with servicing of Multi Grade Filter, Activated Carbon Filter, High quality Activated Carbon, coal based all parts testing and commissioning complete all as specifed and directed by Engr-in-Charge. Note:- All the items ratees Quoted are exclusive of the cost, all items testing and commissioning existing company rap .

Routine Maintenance / Servicing / Repairing and testing of water treatment Ozone plant of capcity 50000 LPH to remove pesticides residues, dirt , dust, silt , sand, insects, fibres, ordour, colour and other oraganic matters etc with treatment media , back wash system with multiport values , distribution/ strainer system, having the with servicing Multi Grade Filter, Activated Carbon Filter, High quality Activated Carbon, coal based all parts testing and commissioning complete all as specifed and directed by Engr-in-Charge. Note:- All the items ratees Quoted are exclusive of the cost, all items testing and commissioning existing company rap .

Repair / Rewinding / Servicing of Fire Hydrant Jocky pump set with motor set of cap 9.3 KW / 12.5 HP, Three phase, 415 Volts , 50Hz , 2865 RPM , 16.8 Amps with super enamelled copper conductor of standard size including varnish, insulation paper and tape including, replacement of unserviceable bush, bearing, rubber gasket, nut, bolts etc and replacement of unserviceable bronge empallor as per site requirement complete servicing all as specified and directed by Engr-in-Charge. Note:- (i) Quoted rate shall be deemed included of transporting, repair, overhauling and replacement of spares complete.

Repair / Rewinding / Servicing of Fire Hydrant Jocky pump set with motor set of cap 6.5 KW / 10 HP, Three phase, 415 Volts , 50Hz , 2940 RPM , 70m head discharge 10.800 m3/hr with super enamelled copper conductor of standard size including varnish, insulation paper and tape including, replacement of unserviceable bush, bearing, rubber gasket, nut, bolts etc and replacement of unserviceable bronge empallor as per site requirement complete servicing all as specified and directed by Engr-in-Charge. Note:- (i) Quoted rate shall be deemed included of transporting, repair, overhauling and replacement of spares complete.

Repair / Rewinding / Servicing of Fire Hydrant Electric driven Induction Motor of cap 55 KW, Three phase, 415 Volts, 50Hz 2945 RPM , IP - 55, with super enamelled copper conductor of standard size including varnish, insulation paper and tape including, replacement of unserviceable bush, bearing, rubber gasket, nut, bolts etc and replacement of unserviceable bronge empallor as per site requirement complete servicing all as specified and directed by Engr-in-Charge. Note:- (i) Quoted rate shall be deemed included of transporting, repair, overhauling and replacement of spares complete.

Repair / Servicing of Fire Hydrant diesel engine DG set Motor of cap 62.5 KW / 85 HP, Three phase, 415 Volts, 50Hz, 1800 RPM ,70 meter head, with super enamelled copper conductor of standard size including varnish, insulation paper and tape including, replacement of unserviceable oil, filter, bush, bearing, rubber, oil pipe, gasket, nut, bolts etc and replacement of unserviceable bronge empallor as per site requirement complete servicing overhauling and testing all as specified and directed by Engr-in-Charge. Note:- (i) Quoted rate shall be deemed included of transporting, repair, overhauling and replacement of spares complete.

Supply & Fix in repair new motor of dosing plant AC induction motor, 1440 Rpm, 1 ph, 230v, 50/60 Hz, 4 mfd, current 0.78 Amps, 120 watt , super enamelled copper conductor of standard size including varnish, insulation paper and tape including, as per site requirement , ( as per sample) complete all as specified and directed by Engr-in-Charge.

Supply & Fix in repair new dosing maching for dosing pump, 06 LPH, pres 04 kg / cm square, Model No UE6D01, super enamelled copper conductor of standard size including varnish, insulation paper and tape including, as per site requirement ( as per sample), complete all as specified and directed by Engr-in-Charge.

Repair / Servicing of diesel engine driven fire pump horizontal end ,centrifugal type CI casing and bronze impeller stainless steel C-45 shaft , KFP 100/40 MOC, 12 V,diesel engine 112 BHP RAD, radiator cooled with with super enamelled copper conductor of standard size including varnish, insulation paper and tape including, replacement of unserviceable oil, filter, bush, bearing, rubber, oil pipe, gasket, nut, bolts check of batteries, charger etc and replacement of unserviceable bronge empallor as per site requirement complete servicing, overhauling and testing all as specified and directed by Engr-in-Charge. Note:- (i) Quoted rate shall be deemed included of transporting, repair, overhauling and replacement of spares complete.

Removing old unserviceable CI pipe / GI pipe / clamp pipe / cement pipe any type, any size, with Supply and laying GI water tubing in repairs for 80 mm bore, medium grade galvanized with all fittings (such as tee, elbow, flanged, long socket, union, short pieces) and fixed to wall or ceiling or laid in floor,duct and trenches including taking down existing unserviceable old pipe any size, any type tubing and connections etc complete all as specified and directed by Engr-in-Charge of Make : Surya Prakash / Jindal / TATA / BST / Swastic. Note: - Rate quoted includes road cutting / wall floor and making good damaged portion matching with existing surface with all existing finishes.

Ditto all as per item No 84 but 50 mm bore

Ditto all as per item No 84 but 40 mm bore

Ditto all as per item No 84 but 25 mm bore

Ditto all as per item No 84 but 20 mm bore

Ditto all as per item No 84 but 15 mm bore

Supply & Fix Submersible pump with motor 0.5 HP complete set, with complete fixing accessories such as nut, bolts, washer and connection complete all as specified and directed by Engr-in-Charge. Make: Kirloskar / Prayag / Symet / Oswal

Supply & Fix Monoblock pump with motor 1.0 HP complete set, with complete fixing accessories such as nut, bolts, washer and connection complete all as specified and directed by Engr-in-Charge. Make: Kirloskar / Prayag / Symet / Oswal

Supply & Fix pressure pump set of cap 1.0 HP complete set, with complete fixing accessories such as nut, bolts, washer and connection complete all as specified and directed by Engr-in-Charge. Make: Kirloskar / Prayag / Symet / Oswal

Shifting , connection and testing of Centrifugal Motor with pump set 40 HP Phase - II pump house complete masinary works, welding wks, header wks, plinth foundation wks, including pipe, rubber gasket, flanged , NRV, Foot valve ,Sluice valve, inlet outlet connection bearing, coupling, nut, bolts, washer and painting and fixed all servicing as per site requirement complete all as specified and directed by Engr-in-Charge . Note: - Rate quoted includes all materials and making good damaged portion matching with existing surface with all existing finishes.

M & L for leakage rectification, cutting of existing pipe and making threaded for repair / replacement of U/S fittings etc.pipe in short length ( up to 1.5 mtr ) for addition / alteration of 15 to 25 mm dia GI pipe and including replacement of fittings pipe in short lengths (up to 1.5 mtrs) of 15 to 25 mm dia GI pipe , welding including necessary excavation & earth work as required for making it serviceable complete all as specified and directed.

All as per item No 89 but here in before 50 to 80 mm bore

All as per item No 89 but here in before 100 to150 mm bore

Supply and fixed in repair star delta starter complete set with suitable size cable for connection between starter for 30 HP, 3 Phase, 415 V electric motar including necessary connection and complete fixing arrangement wire, nut bolts etc fixed to wall fixed on stand made out of angle iron 40 X 40 X 4 mm size complete all as specified and directed. Make: L&T/C&S/Bharat Cutler Hammer/Maxwell/Jyoti.

Supply and fixed in repair star delta starter complete set with suitable size cable for connection between starter for 40 HP, 3 Phase, 415 V electric motar including necessary connection and complete fixing arrangement wire, nut bolts etc fixed to wall on stand made out of angle iron 40 X 40 X 4 mm size complete all as specified and directed. Make: L&T/C&S/Bharat Cutler Hammer/Maxwell/Jyoti.

M & L in repair star delta starter capacity 7.5 HP change of relay , contactor, ON OFF switch , display board etc complete set with suitable bore well for connection between starter to pump with motor 3 Phase, 415 V electric motar including necessary connection and complete fixing arrangement wire, nuts, bolts etc fixed to wall complete all as specified and directed. Note:- (i) Quoted rate shall be deemed included of transporting, repair, overhauling and replacement of spares complete.

M & L in repair star delta starter capacity 15 HP change of relay , contactor, ON OFF switch, display board etc complete set with suitablefor bore well connection between starter to pump with motor 3 Phase, 415 V electric motar including necessary connection and complete fixing arrangement wire, nuts, bolts etc fixed to wall complete all as specified and directed. Note:- (i) Quoted rate shall be deemed included of transporting, repair, overhauling and replacement of spares complete.

M & L in repair star delta starter capacity 30 HP change of relay , contactor, ON OFF switch, display board etc complete set with suitable panel connection between starter to pump with motor 3 Phase, 415 V electric motar including necessary connection and complete fixing arrangement wire, nuts, bolts etc fixed to wall complete all as specified and directed. Note:- (i) Quoted rate shall be deemed included of transporting, repair, overhauling and replacement of spares complete.

M & L in repair star delta starter capacity 40 HP change of relay , contactor, ON OFF switch, display board etc complete set with suitable for panel connection between starter to pump with motor 3 Phase, 415 V electric motar including necessary connection and complete fixing arrangement wire, nuts, bolts etc fixed to wall complete all as specified and directed. Note:- (i) Quoted rate shall be deemed included of transporting, repair, overhauling and replacement of spares complete.

Supply and Fixing submersible pump with motor capacity 15 HP / 11KW, 415 V, 50Hz, 3 Phase, suitable for bore well and upto 15 stages not less then 09 stages body and pump saft of stainless steel having head 62 - 212 meter, flow rate 480 LPM - 80 LPM and delivery size 80mm complete . Make: Kirloskar / KSB or equivalent make.

Supply and Fixing submersible pump with motor capacity 7.5 HP / 5.5KW, 415 V, 50Hz, 3 Phase, suitable for bore well and upto 09 stages not less then 08 stages body and pump saft of stainless steel having head 41 - 141 meter, flow rate 420LPM - 100 LPM and delivery size 50mm complete. Make: Kirloskar / KSB or qequivalent make.

Supply and Fixing monoblock pump with motor set of capacity 11 KW / 15 HP power rating, discharge 500LPM, Three phase, 415 Volts , size 100mm x 100mm, 2880 RPM, 31- 70 Mtr head with super enamelled copper conductor of standard size including varnish, insulation paper and tape including, as per site requirement all fixing accessories nuts, bolts, washer etc complete all as specified and directed by Engr-in-Charge. Make: Kirloskar/ KSB

M & L for Bore well MS ERW black column pipe, 3 mtr long heavy duty, 80mm bore wall thickness 5.4mm, both end flanged with heavy duty MS flanged not less than 16mm screwed and welded inside and outside. The flange end making surface shall be made smooth including welding of 04 strip of 5.0mm thick 25mm wide and 50mm long covering pipe and both end flanged having 08 Nos predrilled hole not less than 16mm including rubber gasket, nut bolts and washer. Pipe should be duly painted with anti corrosive paint complete all as specified and directed. Make Surya Prakash / Jindal /TATA / BST / Swastic

M & L for Bore well MS ERW black column pipe, 3 mtr long heavy duty, 50mm bore wall thickness 5.4mm, both end flanged with heavy duty MS flanged not less than 16mm screwed and welded inside and outside. The flange end making surface shall be made smooth including welding of 04 strip of 5.0mm thick 25mm wide and 50mm long covering pipe and both end flanged having 08 Nos predrilled hole not less than 16mm including rubber gasket, nut bolts and washer. Pipe should be duly painted with anti corrosive paint complete all as specified and directed. Make Surya Prakash / Jindal /TATA / BST / Swastic

M & L of run lead joints for spigot and socket CI fittings / pipes incl spurn yarn complete for 100/150/ 200 mm bore pipes all as specified and as directed.

Dismantiing for repair, servicing, and reassembling RO filter plant after servicing of capacity 25 - 50 Ltr/Hr complete all as specified and directed. Note:- Replaced damaged / unserviceable part will be issued separtely under respective items as supply only.

Supply only sand filter for RO filter plan of capacity 25 to 50 Ltr/Hr of Make Kent

Supply only Activated carbon filter for RO filter plant of capacity 25 to 50 Ltr/Hr of Make Kent

Supply only membrane for RO filter plant of capacity 25 to 50 Ltr/Hr of Make Kent

Supply only pressure switch with relay for RO filter plant of capacity 25 to 50 Ltr/Hr of Make Kent

Supply only Pump for RO filter plant of capacity 25 to 50 Ltr/Hr of Make Kent

Supply only Solinoed valve for RO filter plant of capacity 25 to 50 Ltr/Hr of Make Kent

Supply only PCB Board (Adopter) for RO filter plant of capacity 25 to 50 Ltr/Hr of Make Kent

Supply only TDS Controller for RO filter plant of capacity 25 to 50 Ltr/Hr of Make Kent

PAWAN KUMAR GOVT. CONTRACTORS (BID ID -3128422)