Annual Civil maintenance of water supply, STP, UGD and other works at Gerusoppa for a period of July to September-2026.

Annual Civil maintenance of water supply, STP, UGD and other works at Gerusoppa for a period of July to September-2026.

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring,strutting, barricading, caution lights...

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...

Refilling available earth around trenches/ pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1....

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area as per direction of Engi...

Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge. For thickness of tiles 10 mm to 25...

Providing and laying in position cement concrete Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates for levelling course for all works in foundation. The granite/trap/basalt crushedgr...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement: 6 fine sand) including rounding offcorners wherever required smooth rendering, providing and removin...

Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, lai...

Providing and supplying Hydraulic Excavator of 0.9 m3/JCB on hire basis when required including mobilisation and de- mobilisation of machinery/ equipments to work spot as per specifications.with all l...

Providing and supplying Tipper on hire basis as when required including mobilisation and de-mobilisation of machinary /equipment to work spot, labour, HOM etc, complete as directed by engineer in char...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...

Cleaning the surface to be repaired (Atotic polypropylene) Providing and laying waterproofing with single layer of 3mm thick granule finish using atotic polypropylene membrane IAPPJ using overlap of 1...

Repairing the Atotic polypropylene membrane joint seal opened area, cleaning with wire brush and other mechanical means, applying bitumen emulsion primer and again, sealing the joints of APP membranes...

Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limp...

Provinding and fixing on wall face unplasticised rigid PVC rain pipe conforming to IS:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion , ...

Provinding and fixing on wall face unplasticised rigid PVC pipe conforming to IS:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion , (i) s...

Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali, CNC (Computer Numeric Control) routed of approved design by Engineer-inc...

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensio...

Providing and fixing reeded glass 3mm thick with teakwood beading of 10mm thick.

Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90mm

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 75x47x1.80mm

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 100x58x1.90mm

Providing and fixing bright finished brass hard drawn hooks and eyes : 100 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (an odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws et...

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Tower Bolts 200x10mm

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10mm

Providing and fixing door latch with necessary screws etc complete - Oxidised mild steel door latch.

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125mm

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 100mm

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 m...

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm ap...

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge. SS Aldrop 16mm dia, 300mm

Sweeping and clearing of debries of any kind, in the surrounding area of building including collecting & disposing off the garbage, as directed by engineer incharge.

Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tan...

Cleaning of GLR's clarifloculator tank, back wash filter tank etc., and Cleaning of Over head tanks of residential and non-residential buildings at Jyhothinagar colony, including brushing, washing a...

Desilting of sewerlines upto 300mm dia by mechanical (Jetting,Sucking, Grabber, Scrapper etc.,) means ,setting up the over pumping arrangements, rodding and dislodging of accumulative silt from the pi...

Cleaning of sewer line by upto 150 mm dia.(While cleaning septic tank all safety and precautionary measures to be taken,Standard Operating Procedure to be adopted and PEMSR Act 2013 to be strictly fol...

Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in- charge

Removing of existing old or broken wash basin / urinals/ Indian Water closet/ European Water closet and disposing it with all cost and conveyance labour for all items of work, HOM with all lead and li...

Providing and fixing white vitreous china pedestal type water closet(European type) with seat and lid, 10 litre low level white itreous china flushing cistern & C.P. flush bend with fittings & C.I. b...

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operation...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White

Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Providing and installing at site of work P.V.C. pipes 6 Kg/m2: 63mm(weight of pipe -0.662 kg) including cost of pipes and specials and labour, including lowering into trenches, laying true to line, le...

Providing and installing at site of work P.V.C. pipes 6 Kg/m2: 75mm(weight of pipe -0.917 kg) including cost of pipes and specials and labour, including lowering into trenches, laying true to line, le...

Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...

Repairs to Machinehole for different depths including removal of debris,levelling the brick masonry, construction of brick masonry upto Ground level, providing CC coping alround the MH cover, plasteri...

Providing and fixing 100 mm sand cast Iron grating for gully trap..

Providing and installing at site of work P.V.C. pipes 6 Kg/m2: 160mm(weight of pipe -3.923 kg) including cost of pipes and specials and labour, including lowering into trenches, laying true to line, l...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Supplying of special moulded variety PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments to work site etc complete 32mm dia

Supplying of special moulded variety PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments to work site etc complete- 50mm dia

Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments-32 mm dia PVC Tee

Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments-50 mm dia PVC Tee

Supply and delivery at site special moulded variety PVC reducer as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments- 32 mm dia PVC REDUCER.

Supply and delivery at site special moulded variety PVC reducer as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments- 63 mm dia PVC REDUCER.

Supply and delivery at site special moulded variety PVC reducer as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments, 90 mm dia PVC REDUCER

Supply and delivery at site special moulded variety PVC reducer as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments, 110 mm dia PVC REDUCER.

Supply and delivery at site special moulded variety PVC reducer as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments, 160 mm dia PVC REDUCER.

Supply and delivery at site special moulded variety PVC service saddles as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments, 50 mm dia PVC SERVICE SADDLES.

Supply and delivery at site special moulded variety PVC service saddles as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments, 63 mm dia PVC SERVICE SADDLES.

Supply and delivery at site special moulded variety PVC service saddles as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments, 90 mm dia PVC SERVICE SADDLES.

Supply and delivery at site special moulded variety PVC service saddles as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments, 160 mm dia PVC SERVICE SADDLES.

Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments, 32 mm dia PVC Elbows

Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments, 50 mm dia PVC Elbows.

Supply and delivery at site special moulded variety PVC Quick fix coupler (PVC push collar) of 110 mm dia

Supply and delivery at site special moulded variety PVC Quick fix coupler (PVC push collar) of 90 mm dia

Providing and fixing PTMT pillar cock of approved quality and colour. 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms.

Providing and fixing PTMT grating of approved quality and colour. Rectangular type with openable circular lid

Providing and fixing brass bib cock of approved quality : 15mm nominal bore

Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks.

Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 g.

Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 20 mm nominal bore, weighing not less than 40 g.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe- 40 mm dia.

Providing and fixing 8 mm dia C.P./S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge.

Testing of raw water and clear water as per requirement taking at 4 places (4 samples) (PH, Acidity, Alkality, Hardness, Calcium,Chloride Dissolved Oxygen, Colour, Turbidity, Total Dissolved Solids, I...

Collecting, transporting and testing of sample of treated sewage for PH, TSS, O & G, & COD etc complete and submitting the test report of samples including all men, materials etc., complete with all ...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball-15 mm nominal bore, 105 mm long, weighing not less th...

Providing and fixing PTMT bib cock of approved quality and colour. 15mm nominal bore, 86 mm long, weighing not less than 88 g

Providing and fixing of water storage tank lid (threaded/openable) with locking arrangements as approved brand to tanks as directed by engineer incharge, including cost of labours, transportation an...

Providing Bleaching powder required in water treatment Plant and maintenance of colony & power house including transportation with all lead and lits complete as per specification and directions of eng...

Providing Aluminium Sulfate (Alum) required in water treatment Plant including transportation with all lead and lift complete as per specification and directions of engineer incharge.

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveyingto work site including loading and unloading at both destinations and r...

Rewinding of submersible pumpset with copper winding wires of appropriate guage, as per specifications and / or directions of the departmental officials, including, lifting, transportation, repair, r...

Replace the components of submersible pump sets, requiring replacements decided by the departmental officials, with respective make of damaged ones, including all materials, labour, equipments and tes...

Rewinding of submersible pumpset with copper winding wires of appropriate guage, as per specifications and / or directions of the departmental officials, including, lifting, transportation, repair, r...

Replace the components of submersible pump sets, requiring replacements decided by the departmental officials, with respective make of damaged ones, including all materials, labour, equipments and tes...

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making go...

Cutting of Trees, excluding removal of stumps and roots of trees Girth from 300 mm to 600 mm

Cutting of Trees, excluding removal of stumps and roots of trees Girth from 600 mm to 900 mm

Cutting of Trees, excluding removal of stumps and roots of trees Girth from 900 mm to 1800 mm

Providing, supply, installation of water level controller, make L&T/equivalent, as directed by engineer in charge.

Supply, delivery, erection and commissioning at site ELCB suitable for monoblock centrifugal pump confirming with ISI mark and its latest amendments.

Rewinding of 3HP self priming monoblock motor with copper insulaton wire suitable gauge as per ISI specification with all necessary materials and labour,tools and equipments.

Supplying of cowdung including cost of all lead and lifts as directed by engineer in charge

Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...

Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...

Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...

Providing welder to attend repair works of residential/ non residential buildings including cost of T & P , HOM etc and as directed by the Engineer in charge.

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size compris...

Providing and fixing factory made single extruded WPC(Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension...

Pumping raw water from sharavathi river to jack well and through filter media and after necessary treatment and then to GLSR. Distribution of treated water to the colony, morning and evening as direct...

Pumping raw water from sharavathi river to jack well during General holidays and through filter media and after necessary treatment and then to GLSR. Distribution of treated water to the colony as dir...

Providing operator (daily) in general shift for the regular service and maintenance of STP 1 & 2 equipments, operations & day to day cleaning of GNT chamber,as directed by engineer in charge. Excludin...

Providing operator in general shift during general holidays for the regular service and maintenance of STP 1 & 2 equipments, operations & day to day cleaning of GNT chamber,as directed by engineer in ...

Providing Plumber as when required for attending complaints of residents such as washbasin, kitchen sink, water storage tank connection etc.,

Providing carpentor as when required for attending complaints of residents such as repair of door, windows, easining works etc.,

Providing Helper to carpentor as when required for attending complaints of residents such as repair of door, windows, easining works etc.,

Providing labour for cleaning the surrounding of the colony such as, cleaning of chocked drains, cleaning of residential and non-residential building roof and chajja surfaces, dhobi shed, and attendin...

Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments, 75 mm dia PVC Elbows

Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments, 90 mm dia PVC Elbows.