Repair and Maintenance Works to the EE ECHP 1 Division Office Building located to the South of 263 S road near Old Token Gate

Dismantling the existing door & windows including removal of frames, hinges & fastenings, including cost of labours, lead, lift, devolution to stores, etc. complete.

Dismantling the existing RCC for the required width & depth as per the instructions of Engineer in charge and disposing the debris 1 Km away from the site including cost of all labour, lead, lift, etc. complete.

Dismantling the existing pressed tiles including cost of all materials, labour, lead, lift, etc, complete.

Clean removal of cement plaster and Providing Plastering with C.M 1:5, 12 mm thick including cost of all materials, labours, lead, lift, curing, etc. complete

Providing Centering and shuttering arrangements for supporting the reinforced cement concrete surfaces rate including cost of all materials, labour, lead, lift, etc., complete.

Providing RCC 1:1.5:3 using OP cement with 12mm to 20mm machine crushed HBG metal including cost of all materials, labours, lead, lift, curing, etc. complete - excluding cost of reinforcement and form work.

Supplying fabricating and fixing in position of RTS rod for reinforcement including cutting bending tying and fixing in position including cost of all materials, labour, binding wire, lead, lift, tools etc., complete.

Supply and fixing floor tiles of required size in first quality design ceramic tiles of approved colours in CM 1:3, 20mm thick and pointing with white cement 0.4 Kg/Sqm including cost of tiles labour, lead, lift, etc., complete.

Providing dadooing wall with glazed tiles of approved make first quality printed design and colour of required size in CM 1:2, 10mm thick and pointing with white cement of 0.4 Kg. / Sqm. including cost of materials labour, lead, lift, etc., complete.

Providing and fixing steel door of required size with single leaf, frame using 30x30x5mm M.S.angle shutters with 30x20x3mm M.S.angle and flat 4x5mm for door sfiffner center portion 20x5mm for shutter stiffner horizontal and 16x5mm for door stiffner outer vertical and horizontal with 2mm thick M.S.Sheet both sides made with 2 no. tower bolt, 1 no. aldrop, 2 no. handles, 3 nos. hinges with cost of all materials lead lift etc., complete including two coats of approved quantity enamel paint over the prining coat of red oxide.

Supplying fabricating and fixing in position double leaf steel window with 2mm M.S Sheet and 8mm dia Rod 12cm c/c with window stopper locking facilities etc., complete including cost of materials labour lead lift etc., complete.

Providing and fixing in positin of aluminium anodized glazed single leaf door with inner frame section using 45x45x2mm for top and middle and vertical, door frame section using 100x45x2mm for door and shutter bottom with 5mm thick plain glass with sun control flim on top and bottom using aluminum anodized beading with all necessary standard hardwires such as handle, tower bolts, safety rod with full thread locking arrangement hardware make or equivalent hydralic door closer with double speed adjustment including 1 No etc., complete including cost of all meterials labour, lead, lift etc., complete.

Providing and fixing of anodized aluminium partition works with 65 x 38mm aluminium section as frame with 12 mm thick prelaminated particle board (Novapan sheet) panels fixed using anodized aluminium beading and rubber lining with standared hardwares including cost of all materials, labour charges, all lead, lift etc., complete

Providing false ceiling with Thermocool 25mm thick over the Aluminium section 25 x 25 x 1.6mm (T & L angle) with 50cm c/c in one direction 100cm c/c in another direction with 6mm dia M.S. rod as stiffner at a distance of 1.25m c/c including cost of all materials, labour, lead, lift, scaffolding charges etc., complete.

Providing PCC 1:4:8 using OP/PP cement with 20mm size machine crushed HBG metal including cost of all materials, labours, lead, lift, curing, etc. complete

Supplying laying and jointing in position of 25m dia GI pipes ('B' Class) as instructed by the site Engineer rate including cost of all materials, labour, lead, lift etc., complete.

Supplying laying and jointing in position of 15mm dia GI pipes ('B' Class) as instructed by the site Engineer rate including cost of all materials, labour, lead, lift etc., complete.

Supplying and fixing 6Kg/cm2 PVC pipe of approved quality size of 110mm dia including cost of all specials, all other materials required, labour, lead, lift, etc., complete.

Providing two coats with ready mixed plastic emulsion (exterior walls) of first class quality paint & approved colour over a priming coat, including cost of all materials, scaffolding charges, labours, lead, lift, curing, etc. complete

Providing two coats with ready mixed plastic emulsion (interior walls) of first class quality paint & approved colour including cost of all materials, scaffolding charges, thorough cleaning of surface, labours, lead, lift, curing, etc. complete.

Supplying and fixing New Indian Water closet of approved quality and colour and size 580 x 440mm with 'P' or 'S' trap and foot rest including cost of all materials, labours, lead, lift, curing, etc. complete.

Providing Brick work in CM 1:5 using fly ash bricks including cost of all materials, labours, lead, lift, curing, etc. complete.

Plastering with CM 1:5, 12mm thick including cost of all materials, labour, lead, lift etc., complete.

Painting two coats with ready mixed enamel paint for the old steel surface including cost of all materials, scaffolding charges, labours, lead, lift, etc. Complete.

Providing two coats of anticorrosive black paint to the new surface over a one coat of white cement primer including cost of all materials, labour, lead, lift, etc., complete.