PROVN OF 7 X SOAKAGE PIT NEAR COOK HOUSE AND BATHROOM OF 60 MED REGT AT DUNDAHERA AND CERTAIN REVENUE/MINOR WORKS AT SHANKAR VIHAR UNDER AGE B/R-II AND AGE E/M OF GE (SOUTH) DELHI CANTT-10

Amount

Excavation in trenches n exc 1.5m in deepth and 1.5m in width and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in hard/dense soil complete all as specified and as directed.

Removing excavated material (soil) n .exc 50m and deposited where directed at a level n exc. 1.5m above the strating point complete all as specified and as directed.

M&L for providing cement concrete 1:4:8 type D2 (Using 40mm graded stone agg) in foundation, mass concrete and filiings complete all as specified and as directed.

M&L for providing reinforcement cement concrete M-25 nominal mix as in footing, foundation,beams, plinth beams, base for columns and mass concrete etc complete all as specified and as directed.

M&L Form work to side of concrete in fdns, footing base, base of columns, side and soffits of plinth beam and simillar work complete all as specified and as directed.

M&L for providing reinforcement cement concrete M-25 (Nominal Mix) as in columns and pillars etc complete all as specified and as directed.

M&L Form work to side of columns and simillar work complete all as specified and as directed.

M&L for providing reinforcement cement concrete M-25 (Nominal Mix) as in Beams, cantilevers, ressummers, lintels over 1.5m span concrete etc complete all as specified and as directed.

M&L Form work to side of sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, and simillar work complete all as specified and as directed.

M&L for providing reinforcement cement concrete M-25 (Nominal Mix) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

M&L Formwork to Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide complete all as specified and as directed.

S&F milt steel TMT bars 10 mm dia and over , cut to length, bent to shape requred, including crancing bending and binding with mild steel (anneal) wire not less than 0.90mm dia.

S&F mild steel TMT5mm dia and over upto and including 10mm dia in stirrups, and binders complete all as specifed and directed.

Material & labour for brick work with sub class B old size burnt bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and as directed.

All as per item no 16 above but built for honey comb

Material & labour for brick work with sub class B old size burnt bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces with CM 1:6 finished even and smooth withot using extra cement.

M&L for 15mm thick rendering with ready mix plaster on faces of brick or concrete surface, finished even and smooth without using extra cement, complete all as specified and as directed.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces with CM 1:4 mixed with WPC finished even and smooth without using extra cement complete all as specifed and as directed. (Note : WPC will be measured & paid separately).

Supply only Liquid water proofing compound of approved quality.

M & L for rendering 10 mm thick on surfaces of ceiling in cement mortar (1:3) and finished even and smooth without using extra cement complete all as specified and as directed.

Material & labour for preparation of new undecorated plastered surfaces of wall and applying three coats of white wash etc complete all as specified and as directed.

All as per item No 24 here - in - above but in ceiling - ditto -.

M&L Preparation of new plaster surfaces apply two coat of cement base paint over a coat of primer.

M&L hardcore of gauge n.exc. 63mm deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface for plinth protection/path

M&L for 75 mm thick Cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base to floors finished even complete all as specified and as directed.

M&L providing 25mm thick cement concrete 1:2:4 type B1 (Using 20mm graded stone agg) , as in sub base in floor/paving etc complete all as specified and as directed.

M & L for joint free coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding. 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed.

M&L coloured glazed ceramic tiles 300x450x6 to 7mm thick, in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles including rendering 10mm thick in CM 1:4 complete all as specified and as directed.

M&L 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as spd and as directed.

S&F fibre glass reinforced plastic (FRP) door frame, three lagged of cross section 90 mm x 45 mm having single rebatd of 32x15 mm to receive shutter of 30 mm thickness, moulded withfire retardant grade unsaturated polyesterresin and chopped mat. Door frame laminateshall be 2mm thick and shall be filled withsuitable wooden block in all over frame. The frameshall be covered with fibre glassfrom all sides including MS stay at the bottom to steady the frame complete all as specified and as directed.

S&F factory made solid FRP door shutter , 30 mm thick glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire retardantgrade unsaturated polyester resin mouled to 3 mm thick FRP laminated for forming hollow rails and styles iwthwooden frame and suitable blocks of seasoned wood inside at required places forfixing of fittings, cast monolithically with 5 mm thick FRP panels and confirmign to IS 14856-2000 complete all as specified and as directed.

S&F 100mm long medium weight cold rolled mild steel butt hinges complete all as specified and as directed.

S&F Extruded Aluminium alloy handles, fabricated type anodised of 125mm long complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolts of extruded section and fixed of 100mm long complete all as specifed and directed.

S&F 250 mmAluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specifed and directed.

M&L for Steel vantilator with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded

M&L for 4.0 mm thick frosted sheet glass ordinary quality and glazing with oil putty in square n.exceeding 0.5 Sqm in each panes complete all as specified and as directed.

M&L for preparation of newly steel surface apply two coat of synthetic enamel paints over a coat of red oxide primer.

Supply & fixed in vitreous china wash down water closet (pedestal pattern) 'P' or 'S' trap including jointing including plastic water closet seat, closed pattern with flat bottom and cover and mild steel CP or aluminimised hinging device complete all as specified and as directed.

S&F PVC valveless, syphonic action type flushing cistern, 10 ltr capacity,low level white with inlet ball valve, float and handle including bracket complete all as specified and as directed.

S&F Flushing pipe of polyethylene of low or high density or PVC, 32mm dia, for low level cistern complete all as specifed and as directed.

S&F Vitreous China urinals, halft stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe.

S&F 15 mm bore CP Urinal spreader for urinals complete all as specified and as directed

S&F vitreous china wash basin of size 550x400mm including cutting for and pinning in ends of brackets or erecting stand complete all as specifed and as directed.

S&F PVC connection 15mm size, 450mm long with PTMP nuts both side complete all as specifed and as directed.

S&F waste fittings, brass chromium plated for glazed ware sink, basins, etc with long screwed shanks and fly-nuts, flanged end bedded in red lead cement and other end fixed complete all as specifed and as directed.

S&F rotational moulded polyethylene water storage tankof 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

S&F ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe of size 20mm dia complete all as specifed and directed.

S&F bib taps fancy type chromium plated, with crunch or butterfly handle screwed down,screwed for iron pipe or for brass ferrule and fixed of 15mm bore size complete all as specifed and directed.

S&F pillar cock fancy typre cast copper alloy, chromium plated 15mm dia of bore complete all as specifed and directed.

S&F stop cock fancy type chromium plated, screwed down, high presure with cruntch or butterfly handle screwed both ends for iron pipe of 15mm bore pipe complete all as specifed and directed.

S&F 15mm GI tubing 'Medium grade' with all fiting and fixed complete tom wall and celing or laid in floor of fllowing sizes complete all as specifed and as directed.

ditto as per item no 55 but 20mm bore complete all as specifed and as directed.

S&F 110 mm UPVC pipes Type 'A', single socketed, in any length with rubber ring joints, laid in trenches or in floor or fixed to walls, complete all as specified and as directed.

S&F 110mm UPVC (SWR) Bends/Tee type ‘A’ (any radius), complete all as specified and as directed.

S&F holder bat clamps 110mm bore out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and as directed.

M&LSalt-glazed stoneware gully traps, square or roun mouthed floor trap, plain with grating including jointing with solvent cement of 100mm dia complete all as specifed and as directed.

S&F CP grating of size 100mm dia complete all as specifed and directed complete all as specifed and as directed.

M&L for granite (of any type) work, 18 t o 20 mm thk (table rubbed and polished) in steps,jambs,pillars, window-cills, cooking platforms and like in 20mm thick screed bed cement screed bed 1:6 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed.

Surface dressing in soft/loose soil not exceeding 15cm in depth complete all as specified and as directed.

M&L 100 mm thick PCC 1:4:8 type D2 (Using 40 mm graded stone aggregate) as in sub base complete all as specified and as directed.

S&F in repair ultra design cement concrete coloured tiles 30cm x 30cm x 25mm thick laid over and including 15mm thick cement screed bed with glossy finish with grey cement and pigment any pattern and any approved colour, set, jointed and pointed in neat cement slurry in floors complete all as specified and as directed.

M&L for Plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in coping and similar work etc. including weathering, slightly rounded or chamferred angles and throating and provision of necessary formwork, complete all as specified and directed

M&L for Precast reinforced cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in cover slab etc set laid and dry, including provision of necessary formwork, complete all as specified and as directed

Material & Labour for 150 mm internal dia salt glazed stone ware drain pipes laid in trenches and jointed complete all as specified.

Material & Labour concrete bed to 150 mm bore drain pipes in cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregates) including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified.

Surface excavation not exc 30 cm deep and avaraging 15 cm and getting out soft/loose soil.

M&L Machine pressed precast concrete interlocking paver block any colour , any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade laid over 50mm laid sand cusion all as specified & directed by Engr-in-Charge and joints grouted in Cement Mortar 1:4 finished smooth.

Cutting holes in brick walls in built in cement mortar or cement lime mortar exc half brick but not exc one brick complete alll as specified and as directed.

Cutting chases ,pinning in , making good to facings where required and pointing in cement mortar 1:3 to ends or edges or landings, steps, cills, sunshades,shelves,lintel,etc and cutting in chases for concealed conduit wiring, etc and making good, cutting not exceeding 10 cm girth.

Excavation in post holes in hard / dense soils , each not exc. 0.50 Cum, getting out, returning filling in and ramming earth in layers not exc. 25cm including watering & removing surplus soil to a distance not exc. 50m & making good surface complete all as specified and as directed

M&L steel work in tubuler trusses including special shaped washer, cleats etc complete using ERW or induction butt welded tubes confirming to IS: 1161-1979 grade st - 240 complete all as specified and directed.

M&L applying two coats of synthetic enamel paint over a coat of red oxide , zink chrome primer including preparation of new steel surfaces of any description , not itherwise described , over 10 cm width or girth ,complete all as specified and as directed.

S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified .

M&L Chequered cement concrete tiles 30cmX30cmX 25mm thick, with grey cement and no pigment, set, jointed and pointed in neat cement slurry in floors,laid over and including 15mm thick screed bed of cement mortar (1:4), complete all as specified and direccted.

Fixing only chain link fencing including line wires, any mesh size and type and type of standards, rails, straining bolts etc including provision of binding wire all as specified.

Supply only MS galvanished chain link fencing with 3 mm dia and size 50 mm x 50 mm including line wires including strain bolts, binding wire etc all as directed.

S&F mild steel screw bolts (machine made) with hexagonal head at one end and screwed the other or screwed both ends each screwed and to be fitted with washers and with hexagonal nut of exc 5 cm length with dia of shanis 11 to 15 mm etc all as specified and as directed.

S&F mild steel work such as in fencing post, tie bars etc including embedding into concrete and making holes for screwing of nut, bolts, cutting top to shape as directed, drilling holes, notching for wire etc confirming Fe 410-0 or Fe 310-0 all as specified and directed.

M&L for framed work as in doors, gates of angle fe -410 gde E 250 qureed section with gussed plates complete drilled or welded to be prepared for hanging or sliding with and including either hooks and hinges all as directed by Engr-in-Charge.

S&F fabricated aluminum window with powder coated anodized aluminum frame of section 63.5mm x 38.10mm x1.5mm thick, shutter with section 47.62mm x 44.45mm x 1.5mm thick including aluminum anodized “D “ handle, hinges, peg stays, tower bolts, etc including jointing cleats for fixing builder's hardware fittings & stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples including necessary fittings/ fixture /aluminum snap beads complete all as specified. Note: (a) Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately. (b) Cost of SS wire mesh and all fittings/ fixtures deemed to be incl in the above quoted rates and no extra shall be paid.

Excavating over areas, n exc 1.5 m deep and getting out in soft & loose soil

All as per item no.85 above but exc. 1.5m n.exc. 3.00m

All as per item no. 85 above but exc. 3.00m n.exc. 4.00m

M&L for PCC 1:2:4 type B-2 using 40mm grade stone agg as in foundation filling & mass concrete

M&L loose filling with broken bricks aggregate of gauge 80 to 150mm in soakage pit or socakage well

M&L for laying 150 mm dia RCC NP2 drain pipes and jointed in cement mortar and tested on completion all as specified and as directed.

M&L Cement concrete 1:2:4 type B1 using 20mm graded stone aggragate as in surface channels and drains complete all as specifed and directed.

S&F mild steel work in Bands, straps, supports including bolts, if required: hooks (stay),MS rungs, handles, manhole covers; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165.

Dismantling boarding, any description, fixed in any type any position with nails, complete all as specified and directed by Engineer-in-charge.

M&L for 18mm thick wood plastic composites (WPC) board, fixed with screws as in cupboard/ wardrobe/ almirah shutter including all necessary fittings and fixtures like nickle plated clip hinges, handle etc complete all as specified and directed. Note: (a) Pattern & design of WPC board to be decided by GE. (b) Items like 100mm Aluminium handle in both shutter, Magnetic catcher and CP plate clip hinges, Hasp and staple deemed to be included in the quoted rate.

S & F Continuous (piano) hinges width of flaps 40mm, mild steel, bright finish or electro-galvanised including welding to iron frame complete all as specified and directed by Engineer-in-charge.

S&F in repair drapery curtain rods, stainless steel 25 mm dia of approved quality with decorative wooden finish and two number brackets fixed in brick/concrete/particle board and same finished knobs on each end of curtain rod complete all as specified and directed by Engineer-in-charge.

M&L for ,laying XLPE insulated, armoured heavy duty electric cable with aluminium onductor , 1100 volts grade, corss-sectional area 4 sqmm x 2 core complete all as specified and as directed.

Supplying and laying, joining and testing galvanized iron tubing with screwed socket joints, 25mm bore dia light grade, together with all fittings (such as bends, elbows, tees, short pieces, connectors, backe huts, diminishing pieces, caps plugs and unions etc) and laid in trenches including, screwing and waste and for forged bends on piping as required, cuting through walls, floors and their making good to match with the existing specifications complete all as specified and as directred.

M&L for excavation by tencheless boring technology for holes under road pavement, haredstanding using ultra sound technique and engaging necessary machine including HDPE pipe ISI marked of dia 200 mm suitable for 4 Mpa working pressure complete all as specified and directed.

M&L for sand cushioning to under ground cables 8 cm thick before layig the cable and 15 cm thick after laying stretching and the testing the cable complete all as specified and directed.

Supplying and laying sub class 'B' bricks well burnt for cable protections laid flat with length equal to width of brick over cable perpendicular to length of cable complete all as specified and as directred.

Supply, laying and testing Galvanised steel tube (G.I). light grade of size 40mm (1.5 ) bore fixed to wall and ceilings or laid in trenches all as specified nd as direced. Note: The rate is inclusive of PCC work and making good the disturbed surface of ceiling, wall road etc.

Boring holes under road pavement by bocky manually in any type of soil upto 200 mm bore complete all as specified and as directed.

M&L for point wiring with PVC insulated unsheathed multi standard FRLS type copper conductor cable of size 1.5 Sqmm 1100 volts grade including one run of PVC insulated unsheathed multi stranded FRLS type copper conductor cabel of size 1.5 sqmm as earh continuity conductor connected to common earth dolly in and including PVC concealed conduit 20 mm dia meium grade ISI marked and its accessories including provn of new factory made pressed steel modular switch/terminal box of suitable size and new modular front & back plates of approved colour/model of suitable sie for housing the modular switches, socketts, fan regulators for the following:-. Note :-(i) Cutting chases for concealed conduit and making good in cement mortar is deemed included in unit rate. (ii) No cutting shall be done in the roof for laying PVC conduit for ceiling point wiring. In this specified porition wire shall run through the existing conduit or surface new conduit shall be provided as required. (iii) In case the wiring is encountered with any beam/column, then the wiring will run on surface to avoid any damage to the RCC portion.

S&F modular switch 230/250 volts grade one way (as catered in point wiring above) of following rating:- (a) SP 6 Amp rating Make : Legrant/Indoasialn/Havells

S&F LED Tube light fitting 10 watt (2 (ft) white 230 Volt AC complete including connecting up with three core twisted flexible copper conductor cable completion all as specified and as directed.

S&F cast aluminium housing. powder coated LED bulkhead light fitting, 10 watts with frosted diffuser complete with suitbale driver all as specified and as directed.

S&F factory made, sheet steel distribution borads, SPN 4 ways, double door, suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, ,BS-5484 with min 200 Amps ratting copper bus bar complete all as specified and as directed.

S&F MCBs 10 KA, ruptuing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs) including taking down of old unsv MCBs (DBs Catred separately in this Schedule).:- (a) MCB SP 6 to 32 Amps 'B' curve

All as per serl item No 109 here-in- before but MCB SPN 40-63 Amps 'C' curve

S&F of sturdy Engineering plastic body exhaust fan 250 mm size suitable for 240V, 50 Hz single phase AC supply including cutting chasing for making opening hole of suitable size for fixing on wall with nut, washer etc complete with Lauvers and necessary electrical connection from ceiling rose to fan connecter with three core sheathed wire of required length complete all as specified and as directed.

Note :- The contract sum shall be after deducting the amount of credit shown in Sch of Credit of this tender

P R Constructions (BID ID -3085094)

verma enterprises (BID ID -3077965)

YP INFRA (BID ID -3094551)

B.R. Enterprises (BID ID -3086012)

M/S Parmod Johar (BID ID -3077643)