Development and Upgradation of Existing Community Hall and Other Misc. Works at IIM Sambalpur, Odisha.

Total Amount Total Amount Total Amount

BILL OF QUANTITY

Ref.No. Total Amount Total Amount

Ref.No. Total Amount Total Amount

S.No (DSR-2023 Description Quantity Unit As Per DSR As Per NSR

/NSR) (In Rs.) (In Rs.)

1.0 SUB HEAD-I :- FLOORING & KITCHEN WORKS

Providing & Fixing of FLOTEX- flocked textile flooring having a density of 70 million fibres of

nylon 6.6 per M2 firmly anchored into a waterproofing backing and having average recycled

contents of 20%. The Flocked Carpet must inhibit the growth of Bacteria and Fungi. The Flocked

Carpet must be ZERO EMISSION Carpet (Emission below detection limit after 28 days in

accordance with ISO 16000-9 requirements). It shall conform following properties Minimum

thickness 6.00 mm, roll width - 2.0 Rmt, roll length - 30 Rmt , Dimensional stability as per ISO

2551 : <0.2%, Slip Resistance as per DIN 51097:>0.7 Dry and Wet, Total weight as per ISO 8543 :

1.8 kg/M2, Light fastness as per EN ISO 105 B02 : Commercial heavy as per EN 685 : Class 33,

Reaction to fire as per EN 13501-1 : Bfl-s1, Appearence Retention Hexapod ISO 140-8 , Friction

Slip Resistance Test EN 14041 Class DS, sanitized anti-microbial treatment with resilient

,waterproof backing, 100% washable, anti static and should be supplied and installed by authorised

channel partner

Providing and laying Laminate wooden flooring (Grade AC4, 15 mm thick Ambience Premium-

AC4 ), having a good backing layer made up of plastic laminate or melamine as specified. The

floor shall be laid in place with matching original profiles and accessories as approved and as per

recommendations of approved manufacturer over base of existing flooring. Rate shall be inclusive

of making any cut-out for services, floor matching cover over cut outs etc. all complete as per

Architectural drawings, and as directed by the Engineer-in-Charge.

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas

1.3 (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and

disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge.

Digitally signed by JAYA

Development and Upgradation of Existing Community Hall & Other Misc. Works at IIM Sambalpur, Odisha

BILL OF QUANTITY

Ref.No. Total Amount Total Amount

Ref.No. Total Amount Total Amount

S.No (DSR-2023 Description Quantity Unit As Per DSR As Per NSR

/NSR) (In Rs.) (In Rs.)

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within

50 metres lead. For thickness of tiles 10 mm to 25 mm

Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average

1.6 6.34 compressive strength in super structure above plinth level up to floor V level in :Cement mortar 10.73 Cum 8,962.35 96,174.98

1:4 (1 cement : 4 coarse sand)

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating

and dressing complete

Providing and laying in position cement concrete of specified grade excluding the cost of centering

and shuttering - All work up to plinth

level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone

aggregate 20 mm nominal size derived from natural sources)

Providing of fully insulated (FD 120 ID) Acoustic Fire Door to effectively control noise in

conference rooms, broadcasting studios, theatres and music practice rooms.for Integrity and

Insulation Criteria as per the IS: 3614:2021 (ammendment 2023) and BS: 476 part 22, with

standard heating conditions as specified in IS 17518 (Part 1) to achieve the required integrity

and stability (i.e. to restrict the heat radiation, temperature rise on the non fire side to the

maximum of 140° C above the ambient temperature on the exposed surface of the shutter. The

accoustic fire doors are tested with NCBN technology ("Non Combustible by Nature") duly

tested for sound insulation as per ISO 10140-2 / ASTM E 90 for sound transmission loss

evaluation of 42db in reverberation chamber at ARAI.

Digitally signed by JAYA

Development and Upgradation of Existing Community Hall & Other Misc. Works at IIM Sambalpur, Odisha

BILL OF QUANTITY

Ref.No. Total Amount Total Amount

Ref.No. Total Amount Total Amount

S.No (DSR-2023 Description Quantity Unit As Per DSR As Per NSR

/NSR) (In Rs.) (In Rs.)

Door Frame: Providing & Fixing Frames for Fire resistant door shutters Engineered treated

hardwood / DVL Frame densified and pressure treated with fire retardant chemicals in

vacuum impregnation vessel under 160 PSI pressure as per IS:401and kiln seasoned to

moisture below 15% as per IS:1141 of section 140 X 70 mm spray quoted with 2 coats of In

tumescent paint of minimum 200 micron, with 1 row of non brush type intumescent strip

(imported) of size 20mmx4mm concealed in the groove of the Frame for fire and smoke

sealing, along with acoustic seal, etc. complete as per direction of Engineer in Charge

Shutter: Supplying & Fixing of 75mm thick asbestos free, - Integrity and (Full) Insulation

composite Acoustic Door Shutter complying with with fire performance - FD 120 ID as per

IS:3614:2021 (ammendment 2023), Deurcore comprising of 2x12mm Calcium Silicate boards

over Chemically treated (with Fire retardant chemicals in vaccum pressure impregnation

vessels under 160 psi pressure as per IS:401 and kiln seasoned to moisture below 15% as per

IS:1141) internal timber (Engineered treated hardwood / DVL, densified to 810 kg/cum)

frame work of 100x36 mm with 36mm thick infill of ceramic fiber (density 128 Kg/cum),

vermaculite mix faced with 6mm Fire retardant High Density fibre ply, internally lipped with

hardwood beading and pasted in Hydraulic Press under 25 MPa, spray quoted with 2 coats of

in-tumescent paint of minimum 200 micron, and with single row of non brush type

intumescent strip of size 10mmx4mm affixed on periphery for fire and smoke sealing in the

slit on all edges of shutter except bottom and placement of 3 mm thick rubber membrane, at

the inside face, sandwitched between calcium silicate board & high density fire retardant ply,

without any external lipping in shutters, etc complete. Vision panel shall have to be provided.

1.10 13.1.2 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) 62.31 Sqm 333.35 20,771.04

Digitally signed by JAYA

Development and Upgradation of Existing Community Hall & Other Misc. Works at IIM Sambalpur, Odisha

BILL OF QUANTITY

Ref.No. Total Amount Total Amount

Ref.No. Total Amount Total Amount

S.No (DSR-2023 Description Quantity Unit As Per DSR As Per NSR

/NSR) (In Rs.) (In Rs.)

Providing and applying white cement based putty of average thickness 1 mm, of approved

1.11 13.80 brand and manufacturer, over the plastered wall surface to prepare the surface even and 62.31 Sqm 156.05 9,723.48

smooth complete.

13.83 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile

Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture,

including applying additional coats wherever required to achieve even shade and colour.

1.13 13.83.2 Two coats

Finishing walls with Acrylic Smooth exterior paint of required shade: New Work (Two or

1.14 13.46.1 More coat @ 1.67l/10sqm over and above including priming coat of exterior primer) 10.39 Sqm 160.60 1,667.83

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in

position and binding all complete above plinth level.

1.16 5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500 D or more. 216.00 Kg 107.85 23,295.60

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc.,

including cutting, hoisting, fixing in position and applying a priming coat of approved steel

1.17 10.16.2 primer, including welding and bolted with special shaped washers etc. complete. Hot finished 262.50 Kg 206.35 54,166.88

seamless type tubes.

Digitally signed by JAYA

Development and Upgradation of Existing Community Hall & Other Misc. Works at IIM Sambalpur, Odisha

BILL OF QUANTITY

Ref.No. Total Amount Total Amount

Ref.No. Total Amount Total Amount

S.No (DSR-2023 Description Quantity Unit As Per DSR As Per NSR

/NSR) (In Rs.) (In Rs.)

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of

corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness

with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns

epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should

have protective guard film of 25 microns minimum to avoid scratches during transportation

and should be supplied in single length upto 12 metre or as desired by Engineer in-charge.

The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with

EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the

cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

5.9 Centering and shuttering including strutting, propping etc. and removal of form for all heights

1.20 5.9.1 Foundations, footings, bases of columns etc. for mass concrete. 9.86 Sqm 392.15 3,865.03

1.21 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers. 7.50 Sqm 736.40 5,523.00

1.22 5.9.6 Columns, Pillars, Piers, Abutments, posts and Struts 2.23 Sqm 961.30 2,145.62

Reinforced cement concrete work in walls (any thickness), including attached pilasters,

buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts

etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing

1.23 5.2.2 and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natu ral sources 3.32 Cum 10,852.95 36,028.13

: 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Digitally signed by JAYA

Development and Upgradation of Existing Community Hall & Other Misc. Works at IIM Sambalpur, Odisha

BILL OF QUANTITY

Ref.No. Total Amount Total Amount

Ref.No. Total Amount Total Amount

S.No (DSR-2023 Description Quantity Unit As Per DSR As Per NSR

/NSR) (In Rs.) (In Rs.)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness

to be specified by the manufacturer), of approved make, in all colours, shades except

burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting,

1.24 8.31 risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse 31.50 Sqm 1,267.95 39,940.43

sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white

cement mixed with pigment of matching shade complete

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the

manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of

approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar

1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including

grouting the joints with white cement and matching pigments etc. The tiles must be cut with

1.25 11.41A.1.1 the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, 34.05 Sqm 1,534.85 52,253.97

plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the

tiles gently and easily.Double charge vitrified tile polished finish of size . Size of Tile 600 x

Digitally signed by JAYA

Development and Upgradation of Existing Community Hall & Other Misc. Works at IIM Sambalpur, Odisha

BILL OF QUANTITY

Ref.No. Total Amount Total Amount

Ref.No. Total Amount Total Amount

S.No (DSR-2023 Description Quantity Unit As Per DSR As Per NSR

/NSR) (In Rs.) (In Rs.)

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid

door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC

polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood

powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100

gms) fabricated with miter joints after applying PVC solvent cement and screwed with full

body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw

withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58

1.26 26.86.4 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A 7.83 Meter 1,075.70 8,422.73

category with property of being termite/borer proof, water/moisture proof and fire retardant

and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length

complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners

shall be paid for separately).Frame size 50 x 125 mm

Digitally signed by JAYA

Development and Upgradation of Existing Community Hall & Other Misc. Works at IIM Sambalpur, Odisha

BILL OF QUANTITY

Ref.No. Total Amount Total Amount

Ref.No. Total Amount Total Amount

S.No (DSR-2023 Description Quantity Unit As Per DSR As Per NSR

/NSR) (In Rs.) (In Rs.)

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid

decorative type flush door shutter of required size comprising of virgin polymer of K value 58-

60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat

husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) having

minimumdensity of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N

(Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and

resistance to spreadof flame of Class A category with property of being termite/borer proof,

water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14

microns thick ofapproved design pasted with hot melt adhesive on both facesof shutter and

1.27 26.88.2 fixing with stainless steel butt hinges of requiredsize with necessary full body threaded star 3.31 Sqm 5,432.85 17,969.15

headed counter sunk S.S screws, all as per direction of Engineer-In- Charge.35 mm thick

including ISI marked Stainless Steel butt hinges

with necessary screws

(Note: stainless steel butt hinges and necessary S.S screws

shall be paid separately)

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm

diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm

1.28 9.53 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). 18.00 Each 228.85 4,119.30

9.74 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc.

Digitally signed by JAYA

Development and Upgradation of Existing Community Hall & Other Misc. Works at IIM Sambalpur, Odisha

BILL OF QUANTITY

Ref.No. Total Amount Total Amount

Ref.No. Total Amount Total Amount

S.No (DSR-2023 Description Quantity Unit As Per DSR As Per NSR

/NSR) (In Rs.) (In Rs.)

Providing and fixing aluminium extruded section body tubular type universal hydraulic door

closer (having brand logo with ISI, IS: 3564, embossed on the body, door weight upto 36 Kg.

1.31 9.84 to 80 Kg. and door width from 701 mm to 1000 mm), with double speed adjustment with 3.00 Each 983.15 2,949.45

necessary accessories and screws etc. complete.

9.88 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and

1.32 a pair of lever handles of approved quality with necessary screws etc. complete. 3.00 Each 998.35 2,995.05

9.92 Providing and fixing chromium plated brass handles with necessary screws etc. complete:

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels,

plates etc., including welding, grinding, buffing, polishing and making curvature (wherever

required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing

the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts

1.35 10.28 etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement 22.50 Kg 772.40 17,379.00

as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel

members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Digitally signed by JAYA

Development and Upgradation of Existing Community Hall & Other Misc. Works at IIM Sambalpur, Odisha

BILL OF QUANTITY

Ref.No. Total Amount Total Amount

Ref.No. Total Amount Total Amount

S.No (DSR-2023 Description Quantity Unit As Per DSR As Per NSR

/NSR) (In Rs.) (In Rs.)

Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of

lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required)

extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles

and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and

design duly reinforced with galvanized mild steel section

made of required shape & size as per CPWD Specification, uPVC extruded glazing beads,

interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM

gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head,

comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per

IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc.

Profile of frame, sash & mullion (if required) shall be mitred cut and fusion

welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing

hardware and drainage of water etc. After fixing frame the gap between frame and adjacent

finished wall shall be filled with weather proof silicon

1.36 9.147A sealant over backer rod of approved size and quality, all complete as per approved drawing

conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel

reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-

in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with /

without high performance coatings as per design requirements and conforming to IS: 3548 &

IS: 16231 shall be paid separately.Note:- Structural design proof checked from a Government

Engineering Institute, to be provided by the manufacturer for : (i) Sites with basic wind speed

> 45 m/sec as per IS 875 — Part 3

(ii) Sites with structure height more than 20m for all wind speeds

Digitally signed by JAYA

Development and Upgradation of Existing Community Hall & Other Misc. Works at IIM Sambalpur, Odisha

BILL OF QUANTITY

Ref.No. Total Amount Total Amount

Ref.No. Total Amount Total Amount

S.No (DSR-2023 Description Quantity Unit As Per DSR As Per NSR

/NSR) (In Rs.) (In Rs.)

9.147.A4.1 Using R2 series with frame (70 mm & above) x (40 mm & above) & both glazed and fly

1.37 screen sash (25 mm & above) x (50 mm & above) with zinc alloy (Zamak) powder coated 1.62 Sqm 10,993.55 17,809.55

touch locks with hook. (Height upto 1.2 metre).

9.153 Providing and fixing steel (white power coated) crescent lock for uPVCsliding window/ door

with necessary screws etc. complete.

15.7.4.4 Demolishing brick work manually/ by mechanical means including stacking of serviceable

1.39 material and disposal of unserviceable material within 50 metres lead as per direction of 0.72 Cum 2,060.20 1,483.34

Engineer-in-charge.In cement mortar

17.7A Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole

1.40 basin mixer of approved quality and make, including painting of fittings and brackets,

cutting and making good the walls wherever required:

White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single

hole basin mixer

17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983

1.42 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and

brackets, cutting and making good the walls wherever required :

1.43 17.10.1 Kitchen sink with drain board 1.00 Each 7,514.65 7,514.65

1.44 17.10.1.2 510x1040 mm bowl depth 225 mm

17.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make

and as per the direction of Engineerin-

18.21 Providing and fixing uplasticised PVC connection pipe with brass

1.47 18.21.1 30cm length

Digitally signed by JAYA

Development and Upgradation of Existing Community Hall & Other Misc. Works at IIM Sambalpur, Odisha

BILL OF QUANTITY

Ref.No. Total Amount Total Amount

Ref.No. Total Amount Total Amount

S.No (DSR-2023 Description Quantity Unit As Per DSR As Per NSR

/NSR) (In Rs.) (In Rs.)

18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :

18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all

CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m

spacing. This includes jointing of pipes & fittings

with one step CPVC solvent cement and testing of joints complete

as per direction of Engineer in Charge.

Internal work - Exposed on wall

1.52 18.7.2 20 mm nominal outer dia Pipes 30.00 Meter 335.00 10,050.00

1.53 18.7.3 25 mm nominal outer dia Pipes 30.00 Meter 401.55 12,046.50

18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all

CPVC plain & brass threaded fittings, i/c fixing the pipe with clampsat 1.00 m

spacing. This includes jointing of pipes & fittings with onestep CPVC solvent cement

and the cost of cutting chases and making good the same including testing of joints

complete as per direction of Engineer in Charge.

Concealed work, including cutting chases and making good the walls etc.

1.56 18.8.1 15 mm nominal outer dia Pipes 8.00 Meter 497.80 3,982.40

1.57 18.8.2 20 mm nominal outer dia Pipes 8.00 Meter 537.60 4,300.80

Digitally signed by JAYA

Development and Upgradation of Existing Community Hall & Other Misc. Works at IIM Sambalpur, Odisha

BILL OF QUANTITY

Ref.No. Total Amount Total Amount

Ref.No. Total Amount Total Amount

S.No (DSR-2023 Description Quantity Unit As Per DSR As Per NSR

/NSR) (In Rs.) (In Rs.)

Dismanlting and removing the existing false ceiling by erecting the scaffolding and

1.58 NS stacking the usable material at designated place and unserviceable material to the yard 627.00 Sqm 345.00 2,16,315.00

NS Prepartion of all detail architetural drawings, MEP drawings, structural drawings etc. based on

concept drawing provided

1.60 (a) Preparation of all Architetural GFC drawings and its approval from EIC/Client. 1.00 Job 85,000.00 85,000.00

(b) Preparation of all services/MEP GFC drawings any other drawings required for completion of

the work and its approval from the EIC/Client etc.

TOTAL (SUB HEAD-I :- FLOORING & KITCHEN WORKS) 7,25,322.23 23,56,360.12

2.0 SUB HEAD-II:- WALL CLADDING & PANNELLING

Providing and fixing 12mm ISO303 Bwp lamiply grade hardwood plywood calibrated core face

veneer uniform thickness phenol formaldehyde resin for BwR grade tolerance as per ISO

standards use laminate as per ISO 2046 approved colour factory pressed on calibrated plywood

using hot pressed system both side laminated, one side decorative and other side side balancing

laminate edges to be sealed with 1mm pvc edges bend, density should 650 to 750kg,water

resistance minimum 72 hours

Digitally signed by JAYA

Development and Upgradation of Existing Community Hall & Other Misc. Works at IIM Sambalpur, Odisha

BILL OF QUANTITY

Ref.No. Total Amount Total Amount

Ref.No. Total Amount Total Amount

S.No (DSR-2023 Description Quantity Unit As Per DSR As Per NSR

/NSR) (In Rs.) (In Rs.)

Supply & installation of Slats Surco Plus,made of pinewood E1 grade fiberboard, melamine finish,

groove perforated slats L12-2 - (2mm grooves @ 12mm centers with 3.7% open area) / L24-2 -

(2mm grooves @24mm pitch with 4.9% open area) / L48-2 - (2mm grooves @ 48mm centers with

2.4% open area) / L96-2 - (2mm grooves @ 96mm centers with 1.2% open area), backlined with

Soundtexblack acoustical fleece of 0.27mm thick, surface density 63g/m2,tongue-groove edge for

a seamless look, 5-test fire retardant grade, size 192 x2440x16mm, volume density of base board

700Kg/m3, weight of base board 11.2Kg/m2 installed by using Strut framework system.

The Strut framework system shall include Strut CC50 thickness 0.50mm, length 3600mm, knurled

web 50mm, depth 50mm and equal flanges 15mm is fastened to the wall positioned

horizontally/vertically at every 600mm centres. Strut CC18,aluminium core cross channel,

thickness 0.5mm, length 2400mm, web 15mm & 27mm, depth 18mm and flanges of 7mm with

suitable edge & center brackets is then fixed perpendicular to the Strut CC50 with the help of

fasteners at every 400mm centers Slats Surco Plus of size 192x 2440x16mm in then fixed

perpendicular to Strut CC18 with suitable edge & ccentre brackets. Contractor to provide

expansion joints of 3mm at every 4.88m length wise and 4.992m width wise The system is

backlined with SynthPF 10x50 held in position with dab spots of stick S7/wire mesh.

Technical Parameters

• Fire (Class) – A

• Acoustics – NRC upto 0.85

• Climate (°C, RH) – 50, 70

• Light reflectance (%) – 75 (Maple Arce)

• Green (VOC, RC %) – E1, 25

Digitally signed by JAYA

Development and Upgradation of Existing Community Hall & Other Misc. Works at IIM Sambalpur, Odisha

BILL OF QUANTITY

Ref.No. Total Amount Total Amount

Ref.No. Total Amount Total Amount

S.No (DSR-2023 Description Quantity Unit As Per DSR As Per NSR

/NSR) (In Rs.) (In Rs.)

Supply and Installation of Anutone Soak Cord, square edge, fabric wrapped pinewood fiber panel

of size 600x2400x20mm, density 400 kgs/m3, weight 8kg/m2 installed by using Anutone Strut

framework system with non-visible fasteners using Anutone Strut H-Spline. The Anutone Strut

framework systems includes Anutone Strut CC22 Cross Channel having thickness 0.55mm, length

3600mm, knurled web 40, depth 22mm and equal flanges 15mm is fastened to wall positioned

horizontally in a regular manner at 600mm c/c. Anutone Strut H-Spline having sectional thickness

2mm and length 2400mm to be fixed perpendicular to the Strut CC22 Cross Channel at 600mm

centers. The Kerfed edge fabric wrapped panels shall be then inserted into the Strut H-spline along

their long edges of 2400mm against framework to perfect fit with staggered short edges.

Note: Thickness is given for bare Panels, 4mm for cord fabric.(fabric colour as per choice) The

system is backlined with the acoustical infill Anutone SynthPF 5x50.

Technical Parameters

• Fire (Class) – 1 & P

• Acoustics – NRC 0.95 (For 25mm C50 Mounting)

• Thermal conductivity (W/mk)– 0.08

• Climate (°C, RH) – 50, 90

• Light reflectance (%) – colour dependant

• Green (VOC, RC %) – Low, 30

TOTAL (SUB HEAD II :- WALL CLADDING & PANNELLING) 0.00 26,24,093.84

3 SUB HEAD-III :- ROOFING

Digitally signed by JAYA

Development and Upgradation of Existing Community Hall & Other Misc. Works at IIM Sambalpur, Odisha

BILL OF QUANTITY

Ref.No. Total Amount Total Amount

Ref.No. Total Amount Total Amount

S.No (DSR-2023 Description Quantity Unit As Per DSR As Per NSR

/NSR) (In Rs.) (In Rs.)

Providing and fixing false ceiling at all height including providing and fixing of frame work made

of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120

gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm

wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange

fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange

of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of

required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9

mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm

thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450

mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate

channel with connecting clips made out of 2.64 mmdia x 230 mm long G.I. wire at every

junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm

and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450

mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum

board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25

mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square

edges of the board with recommended jointing compound , jointing tapes , finishing with

jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of

primer suitable for board, all as per manufacturer's specification and also including the cost of

making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter

channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in

Charge but excluding the cost of painting with :

12.45.3 12.5 mm thick tapered edge gypsum moisture resistant board 200.00 Sqm 1,529.10 3,05,820.00

Digitally signed by JAYA

Development and Upgradation of Existing Community Hall & Other Misc. Works at IIM Sambalpur, Odisha

BILL OF QUANTITY

Ref.No. Total Amount Total Amount

Ref.No. Total Amount Total Amount

S.No (DSR-2023 Description Quantity Unit As Per DSR As Per NSR

/NSR) (In Rs.) (In Rs.)

Providing and Fixing Channelled Woodworks perforated panels of width 192mm, thickness of

15mm and length 2400 mm, made of a Moisture resistant fibre board substrate with a laminated

facing as per the approved shade (Portland Maple, Sea Beech, Siam Wood & Mystique Walnut,

Interior White, Alumina Pearl) and a melamine balancing layer on the reverse side. The boards

shall have a special perforation pattern where the reverse surface has a “Helmholtz” fluted

perforation with consecutive 3mm wide groove followed by 13mm of visible pane. The edges of

the panel shall be “tongue-and-grooved” to fix special clips for installation and seamless visual.

The back of the perforated panel shall have sound absorbing non-woven Soundtex acoustical

fleece hot pressed to achieve NRC of 0.6. (Average value of Absorption Co-efficient readings

taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 and Humidity Resistance

(RH) of 70% with camber limit less than 1mm/1000mm and bow less than 1mm/300mm.

SUSPENSION: The panel shall be downwardly installed with tongue and groove mechanism using

Inside clip on Prelude 43 with 24 mm wide T - section flanges having rotary stitching on all T -

sections i.e., the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 43mm,

35mm and 30mm respectively. The deflection loading of the system shall be 17.8 kg/m2 (as per

standard installation layout mentioned below) and main beam tested as per ASTM C635

(Deflection limit less than L/360) with deflection loading of 21.4kg/m. The end details of the main

beam and cross tee shall be made of pre hardened steel and the cross tee is designed to provide

double locking between “cross tee to cross tee” and “cross tee to main beam”. All main beam to

main beam and cross tee to cross tee connection shall have a pull out strength of more than 100kg.

The T - Sections shall be made of hot dipped galvanized steel of 100 gsm as per IS 277 (2003) and

pre-painted steel with baked polyester paint with 0T bending capability. Installation should be

carried out as per Specialised Agency recommended procedure. etc. all complete as per

Architectural drawings, and as directed by the Engineer-in-Charge.

TOTAL (SUB HEAD-III :- ROOFING) 3,05,820.00 19,93,500.00

FURNITURE WORKS

Digitally signed by JAYA

Development and Upgradation of Existing Community Hall & Other Misc. Works at IIM Sambalpur, Odisha

BILL OF QUANTITY

Ref.No. Total Amount Total Amount

Ref.No. Total Amount Total Amount

S.No (DSR-2023 Description Quantity Unit As Per DSR As Per NSR

/NSR) (In Rs.) (In Rs.)

This chair features a modern upholstered design that combines comfort, elegance, and

contemporary styling. The chair is crafted with a high curved backrest and integrated armrests,

providing ergonomic support and a relaxed seating experience. It is upholstered in premium

faux leather or PU leather in a soft beige tone on the inner seat and backrest, complemented

by a contrasting darker exterior finish that enhances its sophisticated appearance. The backrest

showcases vertical channel stitching with geometric detailing, adding texture and a refined

decorative touch. The seat is generously padded with high-density foam cushioning for

enhanced comfort during extended seating. Supported by sturdy solid wood or metal legs in a

matte black finish with gold accent caps at the bottom, the chair offers both stability and a

luxurious modern aesthetic. Its sleek profile makes it suitable for dining rooms, cafes,

lounges, or contemporary interior spaces, blending seamlessly with modern and upscale décor

This table features a modern contemporary design with an elegant Round-shaped tabletop

finished in a white marble-look surface with subtle gray veining, giving it a luxurious and

sophisticated appearance. The tabletop is likely made from sintered stone, faux marble, or

engineered marble, offering durability along with a smooth glossy finish. It is supported by a

2 Table striking cylindrical pedestal base in a brushed gold metal finish, which adds stability while 8.00 EACH 36,848.00 2,94,784.00

enhancing the table’s premium aesthetic. The rounded edges and clean lines create a soft,

refined look suitable for modern dining interiors. The table is designed to comfortably

accommodate four to six people, making it ideal for family dining spaces, apartments, or

stylish dining rooms. Its approximate dimensions are around 150–180 cm in length, 85–95 cm

in width, and 75 cm in height, providing ample surface space while maintaining a compact

and elegant footprint.

Total Amount of Furniture Rs. 15,94,784.00

Total Amount of Furniture Rs. 15,94,784.00

Digitally signed by JAYA

ELECTRICAL WORKS DSR 2025

DSR 2025 Rate (Incl. 18%

Sl. No. Descriptions Unit Qty Amount (Rs.)

Electrical Works

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single

core cable in surface/ recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5

sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required.

Wiring for twin control light point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface /

10 1.4 recessed steel conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS/HFFR Point 10 ₹ 2,242.00 22,420.00

PVC insulated copper conductor single core cable etc .as required.

Wiring for light/ power plug with 2X4 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed

11 1.5 steel conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. Meter 550 ₹ 480.00 2,64,000.00

Wiring for light/ power plug with 4X4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed

12 1.6 steel conduit along with 2 Nos. 4 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable for loop earthing as required. Meter 50 ₹ 724.00 36,200.00

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor,

13 1.7 single core cable in surface/ recessed steel conduit as required.

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper

braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the

wall and making good the same in case of recessed conduit as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but

59 1.24 excluding modular plate etc. as required.

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as

Digitally signed by JAYA

77 1.28 Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and

fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and

fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5

91 1.54 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed steel conduit, and earthing the point with

1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete

99 2.3 with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required.

(But without MCB/RCCB/Isolator)

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/

104 2.4 recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing

etc. as required. (But without MCB/RCCB/Isolator)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following

112 2.10 poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

114 2.10.2 Single pole and neutral Each 20 ₹ 643.00 12,860.00

117 2.10.5 Triple pole and neutral Each 4 ₹ 1,301.00 5,204.00

Supplying and fixing following rating, Four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and

commissioning etc. as required.

Supplying and fixing following rating, Double pole, (single phase and neutral), 240 volts, residual current circuit breaker

125 2.14 (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as

Digitally signed by JAYA

Supplying and fixing following rating, Four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB),

129 2.15 having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top along with 20 A

133 2.18 "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with Each 3 ₹ 1,806.00 5,418.00

connections, testing and commissioning etc. as required.

Supplying and fixing 20 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top along with 20 A

2.19 "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with Each 1 ₹ 2,773.00 2,773.00

connections, testing and commissioning etc. as required.

Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top along with 30 A

2.20 "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with Each 1 ₹ 4,358.00 4,358.00

connections, testing and commissioning etc. as required.

135 Hot Dipped Galvanized Iron Cable Tray

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than

50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two

numbers GI Suspenders i/c base of suitable size GI angle, GI bolts & nuts, fastner etc as required.

137 4.6.1 100 mm width X 50 mm depth X 1.6 mm thickness Meter 50 ₹ 754.00 37,700.00

138 4.6.2 150 mm width X 50 mm depth X 1.6 mm thickness Meter 40 ₹ 803.00 32,120.00

139 4.6.3 225 mm width X 50 mm depth X 1.6 mm thickness Meter 20 ₹ 991.00 19,820.00

140 4.6.4 300 mm width X 50 mm depth X 1.6 mm thickness Meter 10 ₹ 1,062.00 10,620.00

145 EARTHING -

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover

147 5.4 plate having locking arrangement and watering pipe of 2.7 Meter long etc. with charcoal/ coke and salt as required. Set 2 ₹ 8,351.00 16,702.00

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating

151 5.9 with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring Meter 40 ₹ 160.00 6,400.00

washer spaced at 50mm)

166 LED LIGHT AND FAN

Digitally signed by JAYA

LED Down lighter (SMD Type) (System lumen efficacy ≥ 105 < 120 lm/Watt )

Supplying, Installation, Testing & Commissioning of LED Recessed/ surface Down lighter (Round/ square/ Rectangular) SMD type of

following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with

Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -50C to 400C, internal surge

protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80,UGR (Unified Glare Rating) < 19,

Flicker free (flicker should be below 5%), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70%

of initial Lumen maintained till life ends, CCT 3000°K /4000°K / 5700°K / 6500°K (As per ANSI Bin), SDCM (Standard Deviation

Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be confirming to

relevant BIS standards. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c

external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with

Minimum 5 year OEM warranty. System lumen efficacy ≥105 and <120 lm/Watt output . LM79 & LM80 Test report and all testing

required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per

requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C)

Powder coated die cast /Extruded aluminium Body including trim

LED Down lighter (COB Type) (System lumen efficacy ≥105 < 120 lm/Watt ).

Supplying, installation, Testing & Commissioning of LED Recessed/ surface Down lighter (Round/ square/ Rectangular) COB Type of

following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating

voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short &

Open circuit protection ,THD < 10% , P.F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating)< 19, Flicker free (flicker should be

below 5%), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till

life ends, CCT 3000°K / 4000°K / 5700°K / 6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum

power consumption should not more than the specified rating and Fixture shall be confirming to relevant BIS standards. Manufactures

174 8.4 Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c external connections with 1.5 sq.mm

FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty.

System lumen efficacy ≥105 and <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS

shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat

sink of aluminium housing such that LED junction temperature shall not rise above 90°C)

Powder coated die cast /Extruded aluminium Body including trim with Aluminium Reflector

Digitally signed by JAYA

LED Panel light 2x2 ft. (System lumen efficacy ≥105 <120 lm/Watt)

Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of following body material and construction as per IS : 10322

with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating

temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.≥0.95, IP20,

CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry),

of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11

report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum

power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/

Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR,

PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen

efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.

Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium

housing such that LED junction temperature shall not rise above 90°C).

Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm)

LED Batten light (System lumen efficacy ≥105 <120 lm/Watt).

Supplying, Installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as

per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt,

frequency 50/60 hz, Operating temp range -5 °C to 40 °C, internal surge protection of 2.5 KV with Short & Open circuit protection,

THD < 10%, P.F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of

minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per

ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating

and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing.

complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and

earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test

report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-

in Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not

rise above 90°C).

Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm)

Digitally signed by JAYA

LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy ≥105 <120 lm/Watt).

Supplying, Installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or

separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz,

Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD <

10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR -15,

lenses for beam angle 30 deg-120deg as per the application and the project requirement., suitable tilt able fitting, life time (LED, Driver

& electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation

IES TM-21-11 report, CCT 3000°K /4000°K / 5700°K /6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) <5,

Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all

respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as

required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output .LM79 & LM80 Test report and all

testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in Charge as

per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C)

Supply of DALI dimmable 32W recessed, deep inset COB LED Downlight luminaire having 3200 lumens. Luminaire shall be made up of pure

polyster powder coated pressure die cast Aluminium housing with inbuilt heat sink to provide better thermal management to enhance LED life. The

luminaire should be equiped with the secondary optics of high efficiency chrome reflector. The luminaire should be available with multiple beam

angle options of and 60°.LM 80-08 compliant ceramic / aluminium base of LEDs from reputed makes such as Nichia/Cree/ Bridgelux/ Lumiled/

Osram/Citizen should be provided. LEDs used in the product shall comply with EN 62471 for Photo-biological safety and certificate for the same

from manufacturer shall be provided. The luminaire should be IP20 rated. The LED shall be compliant with LM80-08 standard with L70 life of

50000 Hrs tested at maximum current (Complete LM 80 test report for LED should be submitted for 10000 hrs of testing). The LEDs used should

be with CCT of 5700 K and CRI of Minimum 80. LED Driver shall be DALI2 compliant, 0-100% dimmable, non-integrated type, Isolated,

Constant Current operated driver with range 120-270V AC. Driver Efficiency > 85% & 3KV internal surge protection, Power factor greater than

0.95 and total harmonic distortion (THD) of less than >=0.95 should be integral to the luminaire. Manufacturer shall have inhouse lab approved by

NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above

parameters. Compliance to Indian Standards of IS10322 Part 5 / Sect 5:1967; 16105 : 2012; IS 16106 : 2012; IS 15885 (Part2/Sec13) : 2012; IS

Supply of Battery-powered switch that controls features ON/OFF, intensity, & CCT which Comes with long lasting inbuilt 3V coin battery for life

cycles upto 5 years. Easy wireless integration with controllers,gateways, keypads, mobile apps.Designed for recess mounted application used for

Dual-function button: long-press ON for brightness, OFF for dimming with input voltage of 110-277VAC and Frequency of 47-63Hz.

Supply of DALI-2 system managing upto 32 DALI drivers with DALI intensity control and

MR color (CCT) tuning suitable for individual & group commissioning.Auto addressing feature to detect non dimmable, Each 1 32400 32,400.00

dimmable and color tunable lights with input voltage of 90-277VAC and frequency of 50/60Hz with dimming range of 0-100%.

204 MV CABLE LAYING

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable

tray as required.

221 10.8.1 Upto 35 sq. mm (clamped with 1mm thick saddle) Metre 280 ₹ 53.00 14,840.00

226 MV CABLE JOINTING & END TERMINATION -

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and

PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

Digitally signed by JAYA

286 26.1 Online UPS - Input supply: Single Phase, Output Supply : Single Phase

Supplying, installation, Testing & Commissioning of following capacity at full load (Unity Power Factor) ON LINE Uninterrupted

Power Supply (UPS) system suitable for Single Phase input, Single Phase output AC Supply. The UPS shall include a Rectifier,

inverter, battery bank suitable for 30 minutes back up (Battery VAH capacity shall not be less than 1600 VAH per KVA of UPS rating

per Hour backup time) on full load (Battery shall be VRLA, SMF in ABS Container) and Static Bypass switch along with provision for

manual bypass, suitable isolation transformer for additional protection against neutral faults etc. The UPS systems shall be

Microprocessor based Digital Control, using Insulated Gate Bipolar Transistor (IGBT)'s both for the rectifier & inverter with PWM

(Pulse Width Modulation) Technology. The quality of design, manufacturing and inspection process should confirm to the relevant

Inter-national standards such as IEC/EN/VDE. The operating efficiency of the UPS systems shall be >95% at 100% non-linear loads.

287 Current total harmonic distortion (ITHD)/ total demand distortion (TDD) on the input grid shall be < 5% at 100 %load. (The required

LC filters shall be included in UPS cost), extreme power factor kit to be include to limit the input pf to 0.99 and output power factor

shall be unity (i.e. kw rating of the UPS shall be kva rating x 1 ) however UPS shall be suitable to take load at 0.7 laging to 0.7 leading

power factor loads. UPS shall be suitable for incoming supply AC single phase 160-270V 50 Hz and delivering output AC supply true

sine wave single phase 220/230/240 Volt, 50 Hz +/- 0.2Hz, Overload capacity of 120% for 10 mins and 150% for 1 minute.

Operating temperature 0 to 40 deg C, Relative humidity 0-95% non condensing, noise level less than 60db at 1 meter distance,

Protection for Under voltage, over voltage, abnormal output voltage, battery over charging, output over current, short circuit, battery

deep discharge , 10 KV surge. Display for watt/VA,Amp and Voltage power parameters etc. UPS shall comply with low voltage

electromagnetic compatibility (EMC) achieved as per EN 6204, EN6204 Part I and Part 2, it shall be a Voltage and Frequency

Independent (VFI) type UPS (as per standard IEC 62040-1, 2 & 3) . The UPS should be with IGBT Based Inverter Technology,

288 Communication RS232/RS485/SNMP port open protocol for BMS integration as per approved by Engineering in charge. Required

battery racks, DC breaker of suitable rating and interconnecting copper conductor cable of suitable size and connectors and all required

accoseries are inclusive in the cost. The UPS should have QR code which should contain drawing, test report OEM manual, Geo- Tag

of manufacturing location etc

TOTAL AMOUNT AS PER DSR (Rs.) 15,77,951.00

TOTAL AMOUNT AS PER DSR (Rs.) 15,77,951.00

MR 1 Supply of ISI marked aluminium conductor XLPE insulated cable as per IS 7098, & cable, armoured, served, sheathed 1100 volts grade.

g) 50 sqmm 3 1/2 core Metre ₹ 474.67 0.00

h) 70 sqmm 3 1/2 core Metre ₹ 643.92 0.00

MR 2 Outdoor/Indoor panel HVAC ODU

Digitally signed by JAYA

Supplying, installation, testing & commissioning of cubical type LT Indoor Panel Board for 415V, 3 Phase, 4 Wire, 50 Hz

AC supply system of suitable size fabricated in compartmentalized design from CRCA sheet steel of 2 mm thick for frame work

and covers, 3mm thick for gland plates i/c cleaning & finishing complete with 7 tank process for powder coating in

approved shade, having extensible type four strip aluminium bus bars of high conductivity, DMC / SMC bus bar supports,

bottom base channel of MS section not less than 75 mmx 50 mm x 5 mm thick, entire panel shall have a common GI earth bar

25mm x 5mm at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of

aluminium bus bars and control wiring with 2.5 sq. mm. PVC insulated copper conductor S/C cable, cable alleys, cable gland

plates in two half, i/c providing and fixing of following switchgear and components complete as required.

1) 250 A, FP, 50 kA, thermo magnetic release type MCCB with

spreader link & ROH - 01 No.

2) 1 set of 300/5 A ratio CTs

3) 1 Set of LED type indicating lamps(RYB) with 2 Amps SP

MCBs for Instrument Protection

4) Multi Function Meter -1 no

(II) Busbars and their ratings 300 A 4 strip aluminum busbars - 100 % Neutral

3) 63 A, FP, MCB 10 kA - 8 Nos with timer for HVAC Set 1 ₹ 3,56,240.00 3,56,240.00

Supplying, installation, of exhaust fan of heavy duty 450 mm sweep 1400 rpm with louvers of exhaust fan in the existing wall,

including fixing & conntection .as required as per direction of Engg.-in-Charge.

Total of NSR items Rs. 4,48,327.60

Digitally signed by JAYA

Rate (Incl. 18%

Sl. No. DSR 2025 /MR Descriptions Unit Qty Amount (Rs.)

FOH Speaker: Supply, installation, testing & Commissioning of biamped, coaxial two-way point source

loudspeaker with a single LF driver and compression driver, Voice coil. Frequency Range (-10dB) of 60Hz -

20kHz or better & long term Continuous Power Handling of approx. 300W (at Low frequency) and approx. 45W

1 MR for High Frequency driver or better. The Loudspeaker module shall have a Max. SPL (Peak) of MF/HF>= 131 or NOS 2 3,00,720.00 6,01,440.00

better. It should have Horizontal dispersion pattern of 110º or better, vertical dispersion of the loudspeaker shall be

60 degrees or better. Or equivalent or better specifications. Complete in all respect as per direction and approval

of Engneer In-Charge.

2 MR FOH Bracket: Supply, installation, testing, & Commissioning of OEM U-bracket for hanging FOH speakers. NOS 2 20,000.00 40,000.00

FOH Hanging Arrangement: Supply, installation, testing, & Commissioning of the hanging arrangement for the

Front Fill Speakers: Supply, installation, testing and commissioning of Small Format high SPL IP55 rated (as per

IEC 60529) all-weather surface-mount loudspeaker. The loudspeaker shall meet the following performance

criteria: Frequency Range (-10 dB) of 90 Hz - 18 kHz or better; Nominal Dispersion: 100° x 100°; Power

handling of 400W peak or more and 100W Long-term Continuous; Sensitivity: 92 dB and the Max SPL: 118dB

Peak or better; Nominal impedance of 8 ohms and Integral multi-tap Transformer with selectable tap settings of

10/20/40/80W@70V & 100V. he loudspeaker system shall be comprised of a Powder-coated finish stainless steel

grille with a Two-part spray polyurea-coated Exterior-grade plywood Enclosure. A single 5.25-inch woofer; a

Single 2-inch voice coil high-frequency compression driver; a U bracket shall be included.

Rear Fill Speakers: Supply, installation, testing and commissioning of Small Format high SPL IP55 rated (as per

IEC 60529) all-weather surface-mount loudspeaker. The loudspeaker shall meet the following performance

criteria: Frequency Range (-10 dB) of 90 Hz - 18 kHz or better; Nominal Dispersion: 100° x 100°; Power

handling of 400W peak or more and 100W Long-term Continuous; Sensitivity: 92 dB and the Max SPL: 118dB

Peak or better; Nominal impedance of 8 ohms and Integral multi-tap Transformer with selectable tap settings of

10/20/40/80W@70V & 100V. he loudspeaker system shall be comprised of a Powder-coated finish stainless steel

grille with a Two-part spray polyurea-coated Exterior-grade plywood Enclosure. A single 5.25-inch woofer; a

Single 2-inch voice coil high-frequency compression driver; a U bracket shall be included.

Digitally signed by JAYA

Amplifier: Supply, installation, testing and commissioning of class D amplifier with 2 x 600 W Load-

independent outputs deliver full channel power to either low-impedance (4-8 Ω) or high-impedance (70/100V)

loads without bridging .Amplifier shall have frequency response of 20 Hz to 20 kHz (+/- 1 dB) for LZ mode,with

THD+N at rated power less than 0.04%.The amplifier shall meet or exceed the following performance

specifications: channel separation (crosstalk) greater than 80 dB below rated power at 1 kHz. The amplifier shall

have 2 line-level inputs with selectable input sensitivity settings ( -10 dBV, 4 dBu and 14 dBu) for balanced line-

level inputs (6-pin Euroblock connector) and possibility of 4 or more no .of digital Audio channels . The

amplifier shall offer a master mute connection for use with external dry contacts, normally open or normally closed,

to mute all outputs of the amplifier.

DSP: SITC of Digital Audio DSP with 32-bit fixed/floating-point DSP 456 MHz/ARM Cortex-A8 600MHz

Processor, Balanced Analog I/O – 12 inputs (routable to AEC), 8 outputs, GPIO – 5x5 expandable general-purpose

control, ControlSpace Network Port – Interfaces with Bose and 3rd party control, Dante Network Port – 64 x 64

channel, 1 Gbps, 2-Line VoIP – SIP 2.0-Compliant IT web configuration page, USB Port – Micro-B USB for PC

soft codecs with stereo input and output, Bose® Amplink – 8-channel uncompressed, ultra-low latency digital

audio, Serial Port – 3-wire RS-232C (DTE) serial interface connection, CC-16 – Supports Bose® CC-16 user

controls, PSTN (RJ-11) – Supports worldwide analog telephone connection, Dynamic Range > 115 dB, A-

weighted 20 Hz – 20 kHz, analog input to analog output; Maximum Input Level +24 dBu; Equivalent Input Noise -

118 dB at 48 dB gain setting; Phantom Power +48 VDC, 10 mA, selectable per input; Output Channels 8 balanced,

Stage Monitor & Control Room: Supply, installation, testing & Commissioning of Active Portable loudspeaker

system with 2 combo XLR-1/4'' inputs, 3.5 mm input, Bluetooth inputs and 1/4'' TRS line output with 11 hours of

play time using the rechargeable lithium ion battery with Freq Response 62Hz - 17kHZ and 109dB peak SPL, 120

H x 50V Nominal coverage.

Wireless Lavalier Microphone: Supply, Installation, testing, and commissioning of Wireless lavalier dynamic

cardioid microphone with a rack mount receiver should have the following specifications:

Frequency response: 50 to 20,000 Hz, Available Frequencies: 524–865 MHz, Battery Life up to 14 hours with AA

9 MR alkaline battery, Operating Range: 300 ft, Transmitter RF Output Power: 10 mW, Dynamic Range: 100 dB, Nos 1 62,429.10 62,429.10

THD<=0.5%. Receiver- Up to 12 compatible systems per frequency band. LCD display with detailed RF and

audio metering. XLR and 1/4" unbalanced connector. Max Output Level: -27 dBV (XLR, mic level), -13 dBV

(1/4"). 12–18 V DC power supply, Operating Temperature Range: -18°C – +50°C.

Digitally signed by JAYA

Gooseneck Microphone: Supply, Installation, Testing, and Commissioning of wired Condenser 18-inch

Gooseneck microphone with base with Polar Pattern: Cardioid, Maximum SPL: 124 dB, Frequency Range: 50 Hz

– 17 kHz, Dynamic Range 1 kΩ load at 1 kHz: 96.2 dB 100 dB at 0 gain, Sensitivity: –35 dBV/Pa or 17.8 mV,

Equivalent Output Noise: 28 dB SPL, Signal-to-Noise Ratio: 66 dB, Common Mode Rejection: 45 dB minimum,

Preamplifier Output Clipping Level 1% THD: –6 dBV or 0.5 V, Mute Switch Attenuation: –50 dB minimum,

Power Requirements: 11 – 52 Vdc phantom, 8 mA. Operating temperature range: -18° – 57° C. Relative humidity:

0 – 95%. Feature: Green LED at the bottom, bottom cable exit, preamp, black, 3-pin XLR Connection,

programmable mute switch.

Boundary Microphone: Supply, Installation, Testing, and commissioning of flush-mount table-embedded

boundary microphone with Cardioid pattern, Mute / Unmute switch button with LED ring Indicator, 3-pin XLR

male connector, RFI shielding, Frequency Response: 40-15,000 Hz or higher, Maximum Input Sound Level: 120

dB SPL (1 kHz at 1% THD) or higher, Signal-to-Noise Ratio: 70 dB or higher.

Dante Endpoint: Supply, installation, testing and commissioning of Dante-based 4 Channel Mic-line Undertable

box type Input expander for Audio DSP, shall support analog Input, POE Dante connection and Loopthru, Logic

I/O for input routable to Dante network, Switchable Phantom power, Selectable Gain and POE as well as Local

power supply support.

Dante USB Adapter: Supply, installation, testing and commissioning of Dante-based Undertable USB Audio

13 MR DSP Interface Device. Shall support at least 4 channels of USB audio and Analog connections for analog phone Nos 1 50,000.00 50,000.00

14 VIDEO & SWITCHING -

PTZ Camera: Supply, Installation, Testing & Commissioning of Full HD 1080p @ 60 frames per second PTZ

Camera with minimum 20X Optical Zoom and FoV of minimum 57 deg, min 100 Presets. Camera should support

simultaneous outputs through Ethernet, HDMI, 3G-SDI & USB 3.0, Audio In, and can be controlled via RS232 &

422 In & Out & IP.Panning angle -170° ~ +170°, Tilting angle -30° ~ +90° . The tilting and panning speed of the

camera should be a minimum 200° per second. Camera should support SRT, FreeD Protocol, PoE and Virtual USB

Driver.Quoted model should be BIS, CE, FCC & RoHS Certified with Test Lab Reports.

16 MR Supply, Installation, Testing & Commissioning of wall mount PTZ camera stand. Nos 2 2,358.75 4,717.50

17 MR Supply, Installation, Testing & Commissioning of Extendable J-type ceiling mount (70 - 110cm). Nos 2 23,417.50 46,835.00

Streamer & Recorder: Supply, Installation, Testing & Commissioning of Recording, Streaming & Webcasting

Hardware simultaneously, Built-in 4x HDMI & IP Inputs with 4x Line Inputs: 2x HDMI Outputs. The system

should be capable to record upto any four inputs simultaneously in a single

frame and as well as individual sources simultaneously. Should have a minimum 1TB inbuilt storage and can be

connected to local NAS storage. The system should be able to support a minimum 3 unicast streams.The recorded

files should have the option of time and date stamp. Quoted model should be CE, FCC & RoHS Certified with Test

Digitally signed by JAYA

AVoIP Decoder: Supply, Installation, Testing & Commissioning of AVoIP Decoder supporting 4K @60fps with

simultaneous outputs through HDMI 2.0, USB Type C & USB Type A with Line Out & 3.5 mm, 1x Line In & 3.5

mm. The decoder should be capable of converting IP to USB 3.0 & HDMI. The decoder should support Video

Decoding Formats of H.264/HEVC with in-built AES128 encryption and NDI HX3 / NDI HX2 / RTSP, PoE+.

Joystick: Supply, Installation, Testing & Commissioning of Joystick with 3" LCD Preview Screen,

20 MR Communication Interface: RS-232 / RS-422 / IP, 4-axis (Pan / Tilt / Zoom), Preset: 255, Speed Control: x1 (1 Nos 1 2,42,250.00 2,42,250.00

Knob), Zoom Control: x1 (Zoom Seesaw Lever).

HDMI Switcher: SITC of a four-input by four-output HDMI 2.0 matrix switcher with HDCP 2.2 support and

capable of handling resolutions up to 4K@60Hz 4:4:4 / 8 bit color with static and dynamic HDR output support

for each channel. The matrix features advanced independent EDID management control for each HDMI. The

analog and digital audio outputs can be set to follow the HDMI video route or can be independently routed either

by API or web control interface. The 4x4 switcher can be controlled via front panel buttons, front panel IR,

external IR, remote IR, RS232, and Ethernet.

HDBaseT Extender Set: SITC of HDMI 2.0 HDBaseT Extension Set, Extend HDMI 2.0 signals up to 4K@60Hz

/ 4:4:4 up to 70m (4K 40m / 1080P 70m), Complete set Includes TX, RX, power supply, and IR flasher/emitter,

Extends bi-directional IR. Flexible PoC (Power on either end), Supports HDR10, HDCP 2.2 compliant, Flexible

power design (use power supply at TX or RX).

HDMI Splitter: Supply, Installation, Testing, & Commissioning 1 in 2 out HDMI distribution amplifier/splitter

which should be HDMI 2.0 4K@60Hz 4:4:4 HDCP 2.2 Compliant and each output can independently support

23 MR automatic down‐scaling from 4K to 1080P if required. The DA should supports multiple HDR formats including Nos 1 16,871.65 16,871.65

HDR10 and Dolby Vision along with PCM 2.0/5.1/7.1, Dolby TrueHD, Dolby Atmos, DTS‐HD Master Audio and

DTS:X audio formats.

Digital Podium: Supply, Installation, Testing & Commissioning of Digital Podium with 21" Interactive Display

with Motorised Panel Facility, Monitor a highly sensitive Interactive Touch Monitor, and a mechanism to make the

panel stable to avoid any kind of shake while wiring. Screen Type Color LED; Scratch resistant, antiglare &

overlay tempered vandal resistant glass (3mm thickness), Size 21”, Resolution 1920 x 1080 (Full HD), Aspect

24 MR Ratio 16:9/ 16:10, Response Time 8 ms, Brightness 250 cd/m2, Lamp Life Time 20,000 Hrs, Contrast Ratio Nos 1 2,20,000.00 2,20,000.00

1000:1, Computer Interface USB x 1, VGA x 1, HDMI x 1, Interactive Resolution 4000 Lpi (lines per inch),

Reading Accuracy ±0.5 mm (center), Tracking Speed 200 points per second, Pen Pressure sensitivity 2048 Levels,

Viewing Angles 160(H); 160(V), Touch: Finger or Stylus, Ports HDMI in x 1, VGA in X 1, DVI - I in X 1, with

gooseneck microphone facility, USB 2.0 A Type for Touch, Power 12V(DC) 3.5 Amp.

CPU: Supply, Installation, Testing, & Commissioning of CPU with Intel® Core i5, 8 GB RAM or better, 500GB

SSD or better, preloaded Windows OS and MS Office with mouse and keyboard. HDMI, USB 3.0 Ports.

Digitally signed by JAYA

Network Switch: Supply, Installation, Testing, & Commissioning of 24x1G PoE+ 2x10G, 2xSFP+ Managed

Switch, PoE Budget 630W PoE Budget with 1 PSU, 720W PoE Budget with 2 PSUs in RPS mode, IGMP Plus for

26 MR automatic IGMP. Management through industry-standard command line interface (CLI), web interface (GUI), Nos 1 2,53,810.00 2,53,810.00

SNMP, sFlow, and RSPAN. PTPv2, L2 switching (IGMP Plus), and L3 routing (static, RIP, OSPF, VRRP, PIM-

27 CABLES & CONNECTORS -

Shielded Cat6A Cable: Supplying and Laying of Category 6A Enhanced Cable, 4 Pair, S/FTP, LSZH Indoor

28 MR CPR. PoE: IEEE 802.3bt Type 1, Type 2, Type 3, Type 4. TIA/EIA Compliance: ANSI/TIA 568.2-D. ISO/IEC Mtr 200 157.25 31,450.00

Compliance: ISO/IEC 11801-1, IEC 61034-2 - Smoke Density Min Transmittance = 60%.

Shielded Cat6A Patch Cord: Supply, Installation, Testing & Commissioning of shielded Cat6A factory crimped

patch cord, 1m.

Shielded Cat6A RJ45: Supply, Installation, Testing & Commissioning of shielded (STP) Field-Mount RJ45 plug

with color-coded TIA-568 A/B for universal wiring.

HDMI Cable: Supply, Installation, Testing, & Commissioning of passive, bidirectional HDMI to HDMI cable,

31 MR 6ft. It should have a male-to-male HDMI connector. Support resolutions up to 4K @ 60Hz 4:4:4 or better, 18 Gbps Nos 8 2,380.00 19,040.00

bandwidth, HDCP 2.2 or better.

Speaker Cable: Supplying and Laying of 2.5 Sq.mm 2 core speaker cable with 80 nos of 0.20 mm conductors per

32 MR core. PVC insulation. Sheath type Vasiform PVC. DC resistance @ 20°C 8.21 Ω/km. Operating voltage of 600 V. Mtr 200 202.30 40,460.00

Operating temperature: -20°C to 70°C. Approved Make: Krystals/ Belden/ Panduit

Speaker Cable: Supplying and Laying of 4.0 Sq.mm 2 core speaker cable with 128 nos of 0.20 mm conductors

33 MR per core. PVC insulation. Sheath type Vasiform PVC. DC resistance @ 20°C 5.09 Ω/km. Operating voltage of 600 Mtr 100 318.75 31,875.00

V. Operating temperature: -20°C to 70°C.

Signal Cable: Supplying and Laying of 20 AWG 2 core microphone cable with 16 nos of 0.20 mm conductors per

core. LDPE type insulation. Shield type: Braided Shield. Shield conductor: ATC Copper. Rugged flexible matt

finish PVC jacket. DC resistance of conductor@ 20°C 40.1 Ω/km. DC resistance of shield@ 20°C 22.9 Ω/km.

Operating voltage of 300 V. Operating temperature: -20°C to 70°C.

PVC Conduit: Supplying and fixing of the following sizes of medium class PVC conduit along with accessories

35 MR in surface/recess, including cutting the wall and making good the same in case of recessed conduit as required. Mtr 120 109.65 13,158.00

SITC of required adequate AV connectors: XLR male, XLR female, 3.5mm Stereo Connector, 6.35 mm mono

24-Port Patch Panel: Supply, Installation, Testing, & Commissioning of Cat 6A, 24-port loaded, 1U Modular

Jack Panel Should accommodate Cat6A with Rear Cable Management and Front removable Tooless Information

37 MR outlet. Should have easy clip management with labels and clear label covers, Made with of Dicast Aluminium Nos 1 29,877.50 29,877.50

Alloy Material and Non Corrosive with Cat6 toolless RJ45 x 24 ports with color code front panel with patch cord

Digitally signed by JAYA

Mounting Rack: SITC of 24U 600/650D Floor mount Rack with Front Flass door with lock, Rear mesh door with

lock and 3inch Castor Wheel included with 2 no 6/16 Amp Indian-Standard - 06 Socket - Single Pole / Screw

Mountable / 16 Amp MCB / Alternating Current - 16 Amp 3 Pin Plug with Power Cable 2.5 sq.mm 3 meter

Length, 1no 1U Cable manager with Plastic cable loops, 2nos CFM FAN set.

Total Amount 50,62,168.95

Total Amount 50,62,168.95

Digitally signed by JAYA

DSR 2025 Rate (Incl.

Sl. No. Descriptions Unit Qty Amount (Rs.)

VRV/VRF HVAC System

31.1 OUTDOOR UNIT

Supplying, Installation, Testing & Commissioning of Modular Variable Refrigerant Flow/Variable Refrigerant Volume air

cooled Outdoor units suitable for cooling/heating having 100% hermetically sealed inverter type twin Rotary/Scroll

Compressor(s),minimum two compressors (with individual separate PCB) for above 14HP modules, microprocessor based

Controller, top discharge type condensing unit(s), with R-410-A Refrigerant or equivalent, vibration Isolators with suitable

foundation etc. complete as required. To have better efficiency condensor fan shall be capable to operate at different speed

31.2 with respect to load.The unit shall deliver the rated capacity and in confirmation as per IS 18728:2024 and CPWD

Specifications and work even at 50°C ambient temperature without tripping. The system shall be able to deliver 100% of

the rated capacity upto 39 °C. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply and

BMS compatible. The unit shall be filled with first charge of the refrigerant and ready for use as required. The condenser

should be coated with a hydrophilic film to prevent water accumulation on the surface of the heat exchanger, enhance water

dispersion, and reduce the risk of degradation, thereby improving overall performance and durability. The Indian Seasonal

Energy Efficiency Ratio (ISEER) of the unit shall be as per Energy Conservation and Sustainable Building Code (ECSBC)

2024 as below and complete as per CPWD specification, connections, inter connections etc. as required. (For capacity <40

kWr ISEER 6.4, Capacity > 40 and <70 ISEER 6.5, Capacity > 70 ISEER 6.6 for ECSBC+ Building)

For Cooling or Heating or Both

31.4 INDOOR UNIT

Supplying, Installation, Testing and Commissioning of following minimum capacity 4 way Cassette Type Indoor ceiling

mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced

blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill,

necessary supports, vibration Isolation, Corded remote control etc., suitable for operation on single phase 230 V ± 10%,

50Hz AC supply, complete, as required. The Indoor units must shut down upon receiving a singal from the BMS

System/Fire Singnals. The system shall be capable to adjust air flow as per room requirement in auto mode. The cooling

capacity of indoor unit will be at air inlet conditions of 27 0C DB and 19 0C WB temperature.

(Make will be same as of Outdoor)

Supplying, Installation, Testing and Commissioning of Y/T/Multi Joints. Joints shall be of same Original Equipment

31.13 Manufacturer (OEM) make as of ODUs and IDUs ₹ -

31.13.2 Outdoor Multi Joint Each 16 ₹ 8,098.00 ₹ 1,29,568.00

Digitally signed by JAYA

COPPER REFRIGERANT PIPING ₹ -

Supplying, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal

sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable

31.14 ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with

Class-O closed cell elastometric nitrile rubber tubular sleeves sections of 19 mm thick insulation as given below for Suction

and Liquid lines, all accessories as per specifications etc. as required :

31.14.1 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Meter 10 ₹ 256.00 ₹ 2,560.00

31.14.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Meter 60 ₹ 346.00 ₹ 20,760.00

31.14.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Meter 40 ₹ 487.00 ₹ 19,480.00

31.14.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Meter 35 ₹ 615.00 ₹ 21,525.00

31.14.5 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm Meter 30 ₹ 739.00 ₹ 22,170.00

31.14.6 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm Meter 40 ₹ 904.00 ₹ 36,160.00

31.14.7 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm Meter 60 ₹ 1,068.00 ₹ 64,080.00

31.14.8 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm Meter 40 ₹ 1,157.00 ₹ 46,280.00

31.14.9 31.8 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm Meter 35 ₹ 1,222.00 ₹ 42,770.00

31.14.10 34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm Meter 30 ₹ 1,286.00 ₹ 38,580.00

31.14.11 38.1 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm Meter 40 ₹ 1,322.00 ₹ 52,880.00

31.14.12 41.27 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm Meter 10 ₹ 1,368.00 ₹ 13,680.00

Digitally signed by JAYA