WELLCOME MAINTENANCE AND INTERNAL ELECTRIFICATION TO OFFRS MD ACCN UNDER GE CENTRAL BANGALORE

Amount

Taking down cement plaster of any description including racking out joints, hacking for key scrubbing down with water etcand removal of entire debris as ordered outside MD land complete all as directed.

Dismantling floor, hearth or wall tiling inluding cement mortar bedding (but not backing), stacking serviceable tiles at site and removal of entire debris as ordered outside NGV Premises complete all as directed.

Taking down shutter of any description area exceeding 1 Sqm but not exceeding 2 Sqm each and refixing in the same opening after cutting , easing and adjustmentas with old ll types of builders hardware complete all as directed.

All as per item No 3 here-in-above but not exceeding 1 Sqm -do-

Taking down shutter of any description exceeding 1 Sqm but not exceeding 2 Sqm each and stacking at site where directed.

All as per item No 5 here-in-above but not exceeding 1Sqm each -do-

M&L for anti-termite treatment to the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified & as directed

Supply only Integral Water Proofing Compound (ISI Marked) of Make : CICO , Acco Proof , Impermo , Aqua flex as approved.

S &F 35 mm thick second class hard wood factory made glazed and skeleton shutter open rebated and prepared to receive glass, guage etc edge of framing plain chamfered or rounded fitted with cut and mitred beads for securing guage etc size of members of shutter as specified in SSR Part I Section 8 clause 8.24 (a) supplied and fitted to chowkats.

S&F 30mm thick Flush shutters, solid core construction, with block coard core & plywood face panels commercial type on both side conforming to IS 2202 (Part- I) -1999, including internal liping beading all round fixed as in Door Shutter,Cup board shutter & Kitchen rack all as specified.

S&F solid PVC door frame of size 50X47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification all as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with plain colour single piece extruded PVC profile ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour single piece extruded PVC profile for top rail lock rail bottom rail on either side and as gap insert for Top rail and bottom rail paneling of plain colour PVC sheet to fitted on the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and as directed..

M&L Pre-laminated particle board, Exterior grade 18/19mm thick, pre-laminated both side with decorative choice lamination and 3mm thick teak wood edging of all around all as specified and directed

S&F 19mm thick MDF Board both side finished as in wardrobe no of compartments & Drawers all as specified and as directed by Engineer-in-Charge.

S & F150 mm long aluminium, anodised , barrel tower bolt (ISI marked) of extruded section and fixed.

S&F100 mm size butt hinges, medium weight cold rolled mild steel and fixed .

S&F in repair 100 mm size aluminium alloy handles (ISI Marked) fabricated type anodised and fixed.

S&F in repair Mild steel powder coated body door stopper with hard drawn steel spring, 150mm size fixed to door all as directed.

S&F in repair continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps 40mm (when open) fixed with CP steel screws complete all as specified and as directed

S & F in repair 40mm dia brass cupboard knob, bright finished, fixed with nut, screw and washer complete of approved make and design as directed by Eng-in-charge.

S & F in repair 2 lever mortice lock vertical type size 100mm complete all as specified

S&F mild steel helical door spring 300mm ordinary rat tail rod pattern spring including roller and roller plate complete all as directed

S&F in repair Magic eye , size & make as per exixting one or as ordered fixed in postion complete all as directed.

S&F in repair 20mm dia aluminium anodised powder coated curtain rods/ towel / ward robe rod etc all as specified and directed.

S&F in repair aluminium anodised brackets powder coated for curtain/Towel/ Ward robe hanging rodall as specified and directed.

S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long be-tween flanges complete all as directed including taking down old towel rail.

S&F for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as ordered complete all as directed.

S&F in repairs stainless steel wire cloth, 0.24mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including supply & fix second class hard wooden fillet, wrought, cross sectional area exceeding 3 Sqcm but n.exc 6 Sqcm fixed with nails complete all as directed.

M & L for running welding in repairs thickness of metal to be welded n exc 6mm

M&L for 25 mm thick plain cement concrete 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as in floor and finished the surface complete all as directed.

M & L non-skid coloured joint free ceramic tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all directed and specified.

S&F vitrified ceramic tiles 10mm mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match with tiles laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all directed and specified.

S&F vitrified tiles 10mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match with tiles laid over and including 10 mm thick screed bed in cement mortar 1:4 complete all directed and specified.

M&L glazed ceramic designer tiles any shade or pattern as approved of size 350x250x7mm / 450x350x7 mm thick, on verticals surfaces, set and jointed in neat cement slurry including 10 mm thick back coat in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all directed. (Note for item Nos 42 & 47 : i) Quoted rate is deemed to be inclusive of cement screed. ii) Shade / pattern / Colour of tiles shall be got appproved before procurement).

M&L for rendering 10 mm thick in CM 1:6 on brick work/stone work or concrete surface finished the surface even and smooth without using extra cement complete all as specified.

All as per item No 35 here-in-above but 5 mm thick in CM 1:3 on ceiling,chajja,roof projection etc.

Three coats of white wash on newly plastered surface of ceilings after necessary preparation of surface complete all as directed.

M&L preparing new plastered wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer over a coat of 1-2 mm thick white cement based wall care putty as ordered complete all as specified.

M&L complete removal of existing any type of treatment of walls by rubbing, scrapping by hand held sander / long handle sander and finally Jet pressure washing to the entire satisfaction of Engineer-in-Charge and applying two coats of oil bound distemper by mechanical means / auto roller over a coat of 1 mm thick white cement based putty mixed with multi purpose mixer complete all as specified.

One coat of oil bound distemper over old decorated plastered / unplastered surface of walls including preparation of old decorated plastered surface all as specified and directed / as per manufacturer's instructions.

M & L Preparation of Old decorated surface and applying one coat of white wash on Walls complete all as specified and as directed.

M & L Preparation of Old decorated surface and applying one coat of white wash on Ceiling complete all as specified and as directed.

M & L Preparation of Old decorated surface and applying one coat of oil bound distemper on Ceiling complete all as specified and as directed.

M & L Preparation of Old plastered surfaces and applying one Coats of cement base paint on Walls complete all as specified and as directed.

M&L Preparation of Old painted surface of Wood of any description and applying one coat of synthetic enamel paint over 10cm width or girth.

M & L Preparation of Old steel surface of any description and applying one coat of synthetic enamel paint over 10cm width or girth complete all as specified and as directed.

Hacking out old broken glass (any thickness) and size from wooden frame glazed with putty or fixed with wooden beads and removal of debris to a distance n.exc 50 mtr and depositing where directed.

S&F sheet glass 4mm thick glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane complete all as directed.

S&F sheet glass 4mm thick figured glass, pin headed type and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane complete all as directed.

Taking down old 20 mm bore GI tubing and connection from Bldg from a height upto 7th floor after necessary disconnection & S&F new CPVC pipe SDR II having outer dia 20 mm pipe with plain CPVC SDR II fitting such as bends, elbows, unions and end pieces to receive the fittings and fixed with solvent cement in walls/ceilings (concealed/surface) or laying in floors in same or different locationas ordered making necessary connection & testing complete to thhe satisfaction of Engineer-in-charge complete all as specified

Taking down old 25 mm bore GI tubing and connectionafter necessary disconnection & S&F new CPVC pipe SDR II having outer dia 25 mm pipe with plain CPVC SDR II fitting such as bends, elbows, unions and end pieces to receive the fittings and fixed with solvent cement in walls/ceilings (concealed/surface) or laying in floors in same or different locationas ordered making necessary connection & testing complete to thhe satisfaction of Engineer-in-charge complete all as specified

S&F in repairs 15 mm bore bib tap, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule

S&F in repairs 15 mm bore bib tap sink cock with flange , cast copper alloy screwed for iron pipe or for brass ferrule

S&Fin repair health faucet ABS body with wall hook and 1.5 metre long SS braided rubber hose pipe and wall hook mounted type complete. Make: Prayag Cat No BEA-40 or equivalent in approved make.

S&F in repairs 15mm bore Stop valve, fancy type with long shank and cup of cast copper alloy chromium plated, screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union

S&F in repairs 15mm bore pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks & fly nuts, screwed for iron pipes complete all as specified & as directed.

S & F in repairs brass, chromium plated, 15mm bore wall mixer for mixing hot and cold water, screwed down with provision of over head shower and cock for iron pipe and fixed complete all as specified and directed. Make: PRAYAG Cat No 8475 or equvelent of Make Hindware/Parryware/CERA

S & F in repair 2 way bib cock double handle with flange, cast copper alloy chromium plated, screwed down, suitable for 15mm bore iron pipe. Make: PRAYAG Cat No P6812 or equvelent of Make Hindware/Parryware/CERA

S&F in repairs brass chromium plated shower rose 125 mm dia with or wihout swivel joint, any size, including fixing to steel pipe or union.Make : CERA Cat No F 7020304 or equivalent of Make Hindware/Parryware/Prayag

S&F in repair toilet paper holder, brass chromium plated, fixed to walls with chromium plated (CP) brass screws complete all as specified & as directed

S&F sink with drainage board made of stainless steel 1mm thick for kitchen with plugs, washers and wastes, including fixing with cast iron cantilever brackets, bedding in cement mortar on to dwarf wall, connecting union to pipe, overall minimum size 915mm x 460 mm with bowl size 410mm x 330mm x160 mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0, complete, including taking down old unserviceable sink (Make: Prayag Cat No 1322D or equivelent of Parryware /Hindware/Cera)

S&F in repair bathroom mirror cabinet (PTMT) of size 430 x 330 mm fixed on wall with cadmium plated brass screws all as directed. Make :- Prayag (Cat Part No. 551) or equivalent of Commander (Jasmine) / Polytuf / Jindal / Parryware

S & F in repairs PVC connection pipe with PTMT nuts, 600mm long complete all as specified

S&F 32/40mm bore Low density polyyethylene (LDPE) pipes of pressure rating 6 kgf/Sqcm with connecting bracket fixed to waste coupling for basin/sinks complete all as specified and directed.

S & F in repair 110 mm bore, UPVC (SWR), Type 'B', Soil waste and vent pipes in any length without ears, with rubber ring joints laid in trenches complete all as specified and directed.

S & F in repair 75 mm bore, UPVC (SWR), Type 'B', Soil waste and vent pipes in any length without ears, with rubber ring joints laid in trenches complete all as specified and directed.

S & F in repair 110 mm bore, UPVC (SWR), Type 'B', Soil waste and vent pipes or for rain water pipe in any length without ears, with rubber ring joints fixed to wall using MS holder bat complete all as specified and directed.

S & F in repair 75 mm bore, UPVC (SWR), Type 'B', Soil waste and vent pipes or for rain water pipe in any length without ears, with rubber ring joints fixed to wall using MS holder bat complete all as specified and directed.

S&F 550 mm X 400 mm size white flat back vitreous china wash hand basin including chromium plated pillar tap (Make: CERA Cat No. S1053101/S1053102 6502) cap stain head suitable for 15 mm bore of pipe , PVC connection 15 mm dia 45 cm long with chromium plated nuts and bolts and suitable washers, PVC waste 32 bore CP waste coupling chain and plug , porcelain stopper including CI bracket fixed in repair complete all as diirected.

S&F in repair CP soap dish 150 mm size with flange fixed on wall with PVC rawl plug & cadmium plated brass screws.

S&F in repair Corner Shelf with 5.5 m or more thick glass as ordered fixed on wall with PVC rawl plug & cadmium plated brass screws

S&F in repair stainless steel peg set of six fixed to wall with two rawl plugs and chromium plated (CP) brass screws complete all as directed

S & F in repairs PVC seat cover for EWC white / Black colour complete with MS Hinged cromium plated make as per existing all as specified and as directed

S&F in repair steel chromium plated gratings, circular type, 125mm dia with or without waste hole fixed to existing traps with white cement complete all as directed.

S & F in repairs, vitreous China wash down water closet pan (pedestal pattern), white, including connection to outgoing drain and 32mm dia flush pipe,flushing pipe, anti syphonic pipe with and including white PVC seat and cover closed pattern with flat bottom and MS chromium plated hinging device including provision of 10 ltr capacity low level PVC Flushing cistern, PVC connection pipe, 15 mm dia, 600 mm long complete including making good damaged/disturbed surfaces complete all as specified and directed. Make of Pan CERA Cat No S1053101/S1053102 and of cistern B1010109 or equivelent of Parryware/Hindware/Prayag

S&F in repairs 10 liters capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet ball valve, float and handle including brackets and flush pipe of polyetylene of low or high density or 32 mm dia PVC connection pipe complete all as directed.Make of cistern CERA Cat No B1010109 or equivelant of PARRYWARE/HINDWARE/PRAYAG

&F in repairs stainless steel Kitchen plate rack of overall minimum size 900mm x 900mm and 250mm deep, with partitions for small/large plates etc made out of stainless steel 24 Gauge, fixed with rawl plug and CP steel screws all as directed. Note : Weight of rack shall not be less than 6.00 Kg. Make PRAYAG Cat No P-348 or equivelent of Nirali/Diamond

Cutting/chipping the spalling concrete surfaces of columns, beams, facias, slabs, Chajjas & cartilevers etc., and trimming cleaning the surfaces of any thickness all as specified and directed. M/L for applying epoxy treatment for bonding old demolished concrete surfaces incl application of one coat of notozinc primer to the exposed reinforcement and over plastering in CM 1:4 average 20mm thick finishied even and smooth without using extra cement to level the surface etc incl necessary scafolding as required at site and where required complete all as specified and directed

E&M :Taking down copper/ aluminium point wiring(light, fan, socket or power) complete, including fittings and fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperately) and making good distrubed surfaces of wall, floors, etc complete.

Point Wiring with 1.5 Sqmm (Nominal Area) PVC insulated unsheathed 1100 Volts Grade Stranded Copper Conductor Cable (Red Colour Cable for Phase and Black Colour Cable for Neutral), laid in and including PVC Casing and Capping with Accessories (size of Casing and Capping as required at Site) including 1.50 Sqmm PVC ins-ulated Stranded Copper Conductor Cable (Green Colour) as Earth Continuity Conductor and connected to Common Earth Dolly or as directed and all accessories including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for One light / fan / bell controlled by one way switch. Note : Cover plate and frame withmetal flush box shall be paid under relevant items of schedule.

All same as per item No 81 here-in-above but for One 3 pin socket point 5 Amp on independent board

All same as per item No 81 here-in-above but for One 3 pin socket point 5 Amp on same board with other switches.

All as per item No. 81 above but with 4 sqmm ( Nominal area ) cable with 4 Sqmm size copper earth continuity conductor for 3 pin 15 A socket outlet on independent board complete all as specified and directed.

Supply and fix modular switch 1 way 6A,1 module Make : Anchor/Havell/Polycab

Supply and fix modular switch 1 way 16A,1 module Make : Anchor/Havell/Polycab

Supply and fix socket, 6A-2/3 pin combined 2 modules Make : Anchor/Havell/Polycab

Supply and fix socket, 6A/16A-2/3 pin combined 2 modules Make : Anchor/Havell/Polycab

Supply and fix moduler fan Requlator, 120 W-2 modules

Supply and fix modular bell push 5 Amp

Supply and fix Ceiling rose surface bakelite 65x50mm three terminals including supply and fix PVC blocks. Make : Anchor/Havell/Polycab

Supply and fix in repair Switch piano, flush button single pole, 5 Amps one way. Make : Anchor/Havell/Polycab

Supply and fix in repair Switch sokcet combination flush type 5 Amp 2/3 pin muliti purpose Make : Anchor/Havell/Polycab

Supply and fix in repair Switch socket combination flush type 5/15 Amps 3/3 pin universal multipurpose Make : Anchor/Havell/Polycab

Supply and fix in repair Fan regulator electronic, step & socket type 230 volt, suitable for 1200/1400mm sweep ceiling fan. Make : Anchor/Havell/Polycab

Supply and fix in repairs modular switch 1 way 6A,1 module Make : Anchor/Havell/Polycab

Supply and fix in repairs modular switch 1 way 16A,1 module Make : Anchor/Havell/Polycab

Supply and fix in repairs socket, 6A-2/3 pin combined 2 modules Make : Anchor/Havell/Polycab

Supply and fix in repairs socket, 6A/16A-2/3 pin combined 2 modules Make : Anchor/Havell/Polycab

Supply and fix in repairs moduler fan Requlator, 120 W-2 modules

Supply and fix in repair modular bell push 5 Amp

Supply and fix in repair white cover plate with frame 2 modules complete Make model Glint or eqvalent model of Havells/Anchor

Supply and fix in repair white cover plate with frame 3 modules complete Make model Glint qr eqvalent model of Havells/Anchor

Supply and fix in repair white cover plate with frame 4 modules complete Make model Glint qr eqvalent model of Havells/Anchor

Supply and fix in repair white cover plate with frame 6 modules complete Make model Glint qr eqvalent model of Havells/Anchor

Supply and fix in repair white cover plate with frame 8 modules complete Make model Glint qr eqvalent model of Havells/Anchor

Supply and fix in repair white cover plate with frame 12 modules complete Make model Glint qr eqvalent model of Havells/Anchor

Supply and fix in repair Matel flush box 2 modules complete Make model Glint qr eqvalent model of Havells/Anchor

Supply and fix in repair Matel flush box 3 modules complete Make model Glint qr eqvalent model of Havells/Anchor

Supply and fix in repair Matel flush box 4 modules complete Make model Glint qr eqvalent model of Havells/Anchor

Supply and fix in repair Matel flush box 6 modules complete Make model Glint qr eqvalent model of Havells/Anchor

Supply and fix in repair Matel flush box 8 modules complete Make model Glint qr eqvalent model of Havells/Anchor

Supply and fix in repair Matel flush box 12 modules complete Make model Glint qr eqvalent model of Havells/Anchor

Supply and fix in repair Fan capacitor 2.5/3.15 mfd suitable for 1200/1400mm sweep ceiling fan. Make : Anchor/Havell/Polycab

Supply and fix in repair Door bell electronic, music type, 230 volt AC. Make : Anchor/Havell/Polycab

Taking down old un serviceable/serviceable light fittings of any type from wall all as directed by Engr in Charge

S&F in replacement LED tube light fitting of 10 watts 6000K , 230 volt, with aluminium extruded channel powder coated with diffuser for glare free light complete with all fixing accessories such as 2 nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge. Make : Shakti/Crompton Greaves/Bajaj

S&F in replacement LED tube light fitting of 20 watts 6000K , 230 volt, with aluminium extruded channel powder coated with diffuser for glare free light complete with all fixing accessories such as 2 nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge. Make : Shakti/Crompton Greaves/Bajaj

Supply and fix in replacement Sheet metal enclosure (ISI marked) distribution board TPN, 415 volts, 4 way Vertical type double door type, 200 Amps rated neutral copper bus bar for housing MCB and fixed and tested on completion complete all as specified.

Supply and fix in replacement Sheet metal enclosure (ISI marked) distribution board for 240 volts, SPN 4 way horizontal type, double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete all as directed.

All as per item No 120 here-in before but SPN 8 ways DB.

Supply and fix in replacement MCB single pole 6 to 32 Amps 240 volts, C series, 10 kA rupturing capacity

Supply and fix in replacement MCB single pole & neutral 40 Amps 240 volts, C series,10 kA rupturing capacity

Supply and fix in replacement MCB Tripple pole & neutral 32 to 63 Amps 240 volts, C series,10 kA rupturing capacity providing in DB complete all as specified.

Supply and fix in repair 1.5 KW heating element as per exixting make or as ordred including rubber washers as per exising complete to the satisfaction of Engineer-in-charge..

All as per item No 125 here-in before but 2KW heating element -do-

Supply & fix in replacement PVC connection pipes 15mm dia for hot / cold water supply with brass adopters 600 mm long

Supply & fix only thermostat for the geyser of 25 - 50 ltr capacities duly ISI Marked as per sample.

S&F Stellar bright 9/10/12 watt , B-22 LED , T -Shape Bulp 230 V , PF not less than 0.85(min) . Make : Havells / bajaj / CG / Phillips.

Taking down unservicable ceiling fan any sweep , model , fixed in any description & Supply and fixing ceiling fan complete with blades,down rods,electronic regulator and accessories,230 V,1200 mm sweep.Min air delivery 210 CFM with service value 6 BEE,Five star rated with brushless direct current motor (BLDC) complete all as specified and directed by Engr-in-charge.(Note : The unservicable fan & down rod to be deposited to E&M Central store without any extra cost to Govt.).

Taking down unservicable exhaust fan any sweep , model , fixed in any description & S & F exhaust fan sweep made of sturdy Engineering plastic complete with louvers shutter,voltage 230 V, 50 Hz, 1200 RPM noiseless,copper winding of sweep 200 mm with self closing louvers and blades fixed in position after necessary cutting wall to size if required as ordered to fix the fan as per manufactuers instructions , making good of the distured surface of wall as per its original specifications , making necessary electrical connection & testing on completion all as directed . .Make :- Havells/ Usha/ Crompton (Note :(i) The unservicableExhaust to be deposited to E&M Central store without any extra cost to Govt. (ii) The quoted is inclusive for any addtional cutting of wall & making good of disturbed surface of wall to its original specifications).

Taking down unservicable exhaust fan any sweep , model , fixed in any description & S & F exhaust fan sweep made of sturdy Engineering plastic complete with louvers shutter,voltage 230 V, 50 Hz, 1200 RPM noiseless,copper winding of sweep 150 mm with self closing louvers and blades fixed in position after necessary cutting wall to size if required as ordered to fix the fan as per manufactuers instructions , making good of the distured surface of wall as per its original specifications , making necessary electrical connection & testing on completion all as directed . .Make :- Havells/ Usha/ Crompton (Note :(i) The unservicableExhaust to be deposited to E&M Central store without any extra cost to Govt. (ii) The quoted is inclusive for any addtional cutting of wall & making good of disturbed surface of wall to its original specifications).

Taking down unservicable exhaust fan any sweep , model , fixed in any description & S & F exhaust fan sweep made of metal body complete with louvers shutter,voltage 230 V, 50 Hz, 1200 RPM noiseless,copper winding of sweep 300 mm withself closing louvers and blades fixed in position after necessary cutting wall to size if required as ordered to fix the fan as per manufactuers instructions , making good of the distured surface of wall as per its original specifications , making necessary electrical connection & testing on completion all as directed . .Make :- Havells/ Usha/ Crompton(Note :(i) The unservicableExhaust to be deposited to E&M Central store without any extra cost to Govt. (ii) The quoted is inclusive for any addtional cutting of wall & making good of disturbed surface of wall to its original specifications).

Taking down old existing sub main wiring and provide new submain wiring with 2 runs of 4 Sqmm single core PVC insulated, unsheathed, multi stranded copper conductor and one single core 4 Sqmm PVC insulated , unsheathed , multi stranded copper cable as earthing lead as per IS : 694 / 1990 drawn through and including non-metallic PVC rigid conduit/casing caping of size as ordered in walls / ceilings etc with all accessories such as Tees, Elbows, junction box, reducers etc and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion complete all as specified and directed. (Note :- 2 runs 4 Sqmm cable , one run 4 Sqmm cable and one run of PVC Conduit /Casing caping shall be measured as one unit length) .

All as per item No 134 here-in-above but 2 runs with 6 Sqmm single core cable and 6 Sqmm single core as earth contunity wire -do- . (Note :- 2 runs 6 Sqmm cable , one run 6 Sqmm cable and one run of PVC Conduit/Casing caping shall be measured as one unit length)

Siddivinayaka Constructions

docileworx

shri veerabadreshwara enterprises

Chandana Enterprises

AAKAAR INTERIOR & CIVIL CONTRACTOR