Andaman Nicobar

Financial Eval

Works

Civil Works - Buildings

Repair and renovation of GSSS Haddo (Block-C and Block-D) under Chatham Section, SD-II, SVPND, APWD, Sri Vijaya Puram. SW_Facelifting of (Block-C and Block-D) GSSS Haddo including repair and renovation of steel glazed doors and window by providing WP

Chief Engineer Andaman Public Works Department (APWD)

Sri Vijaya Puram | South Andamans, Andaman And Nicobar Islands

Amount: ₹33.5 LCloses: 15 Sept 2026Closed

Timeline

Published1 Sept 2026
Closed15 Sept 2026
Technical Evaluation17 Sept 2026
Financial Evaluation18 Sept 2026
Award—

Bids

Percentage

6 Bids18 Sept 2026

#	Company	Amount	Rank	Status
1	K P TRADING AND COMPANY PRIVATE LIMITED L1₹23.8 LAccepted-Finance	₹23.8 L	L1	Accepted-Finance Accept
2	ARJUN MANDAL L2₹24.7 L+₹96,058.47 (4.04%)Accepted-Finance	₹24.7 L+₹96,058.47 (4.04%)	L2	Accepted-Finance Accept
3	INBA CONSTRUCTION L3₹24.9 L+₹1.1 L (4.69%)Accepted-Finance	₹24.9 L+₹1.1 L (4.69%)	L3	Accepted-Finance Accept
4	M/S TRIPATHI AND BROTHERS L4₹26.4 L+₹2.6 L (11.1%)Accepted-Finance SHADIPUR NEAR CORPORATIVE BANK SHADIPUR SOUTH ANDAMAN ANDAMAN NICOBAR 744106 \| SOUTH ANDAMANS \| ANDAMAN AND NICOBAR ISLANDS \| 744106	₹26.4 L+₹2.6 L (11.1%)	L4	Accepted-Finance Accept
5	M/s Premier Steel Industries L5₹29.2 L+₹5.5 L (22.9%)Accepted-Finance GARACHARMA POST SRI VIJAYA PURAM PIN 744105 \| SOUTH ANDAMANS \| ANDAMAN AND NICOBAR ISLANDS \| 744105	₹29.2 L+₹5.5 L (22.9%)	L5	Accepted-Finance Accept

Tender Value

₹33.5 L

EMD Value

₹66,940

Closing Date

15 Sept 2026, 3:00 pmClosed

Tender Inviting Organisation

Name

EE, SVPND, APWD, Sri Vijaya Puram

Address

EE, SVPND, APWD, Sri Vijaya Puram

Work Description

Repair and renovation of GSSS Haddo (Block-C and Block-D) under Chatham Section, SD-II, SVPND, APWD, Sri Vijaya Puram. SW_Facelifting of (Block-C and Block-D) GSSS Haddo including repair and renovation of steel glazed doors and window by providing WP

Tender Information

Tender ID

2026_APWD_24507_1

Reference Number

NIT No. 49/EE/SVPND/2026-27

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Percentage

Period of Work

90 days

Location

Sri Vijaya Puram

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer tender documents

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical

RequiredScan copy of EMD (.pdf)

RequiredScan Copy of Work Experience Certificate (.pdf)

RequiredScan copy of Certificate of valid Registration of GST. (.pdf)

RequiredScan copy of 10 (Ten) years Financial Audited Statement of account from a Chartered Accountant (.pdf)

RequiredScan copy of list of all ongoing works in Form C-3 as specified at Page No.34 of the tender document (.pdf)

RequiredScan copy of Undertaking in terms of para No.36 of Additional Conditions as specified at Page No.34 (.pdf)

Finance

RequiredPrice Bid (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹66,940

Important Dates

Last Activity

18 Sept 2026

Published

1 Sept 2026

Bid Opening

16 Sept 2026

Download Starts

1 Sept 2026

Download Ends

15 Sept 2026

Submission Starts

3 Sept 2026

Clarification Period

1 Sept 2026 - 14 Sept 2026

Bill of Quantities

PercentageBoQ_Ver4.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (25 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade.
1.1	One or more coats on old work.	-	Sqm	-	-
2Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.
2.1	On steel work	-	sqm	1	-
3Finishing walls with Acrylic Smooth exterior paint of required shade:
3.1	Old work (Two or more coat applied @ 1.67 Itr/ 10 sqm) on existing cement paint surface	-	sqm	-	-
4Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)
4.1	30 mm thick	-	sqm	1	-
5Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with:
5.1	4.0 mm thick glass panes	-	sqm	1	-

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.05 MB

Technical Bid Opening

tech_bid_open.pdf

PDF

Technical Evaluation

tech_eval.pdf

PDF

Financial Bid Opening

fin_bid_open.pdf

PDF

boq_comp_chart.xlsx

xlsx

Financial Evaluation

fin_eval.pdf

PDF

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.04 MB

Work Item Documents

TenderDocNIT49.pdf

Tender Documents • 1.18 MB

Instructions-to-bidders.pdf

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

K P TRADING AND COMPANY PRIVATE LIMITED

L1₹23.8 LAccepted-Finance

ARJUN MANDAL

L2₹24.7 L+₹96,058.47 (4.04%)Accepted-Finance

INBA CONSTRUCTION

L3₹24.9 L+₹1.1 L (4.69%)Accepted-Finance

M/S TRIPATHI AND BROTHERS

L4₹26.4 L+₹2.6 L (11.1%)Accepted-Finance

SHADIPUR NEAR CORPORATIVE BANK SHADIPUR SOUTH ANDAMAN ANDAMAN NICOBAR 744106 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744106

M/s Premier Steel Industries

L5₹29.2 L+₹5.5 L (22.9%)Accepted-Finance

GARACHARMA POST SRI VIJAYA PURAM PIN 744105 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744105

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade.
1.1	One or more coats on old work.	-	Sqm	-	-
2Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.
2.1	On steel work	-	sqm	1	-
3Finishing walls with Acrylic Smooth exterior paint of required shade:
3.1	Old work (Two or more coat applied @ 1.67 Itr/ 10 sqm) on existing cement paint surface	-	sqm	-	-
4Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)
4.1	30 mm thick	-	sqm	1	-
5Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with:
5.1	4.0 mm thick glass panes	-	sqm	1	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade.

1.1

One or more coats on old work.

Sqm

2Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.

2.1

On steel work

sqm

3Finishing walls with Acrylic Smooth exterior paint of required shade:

3.1

Old work (Two or more coat applied @ 1.67 Itr/ 10 sqm) on existing cement paint surface

sqm

4Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

4.1

30 mm thick

sqm

5Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with:

5.1

4.0 mm thick glass panes

sqm