Renewal and Repair of Service Road of Teor Dy. from Km. 6.600 to Km. 12.880

Amount

Earth work in restoration of embankment and making daula in ordinary soil including ramming and dressing the surface to required camber and also including 1.5m lift and 30 lead as per directed by engineer in charge.

Clearing thick jungle and thorny bushes without uprooting with disposal.

Scrapping old painted surface including disposal of all scraped material to a distance (100 ft.) as directed by the Engineer-In-Charge (by mechanical)

Brick edging on both side of the road of M-150 bricks 8cm. (3") wide and 12cm (4½") deep laid with mud mortar including all labour and supply of brick finished to required template & ramming the excavated earth as directed by the Engineer-In-Charge.

Providing, laying, spreading and compacting stone aggregate of specific size (45-63 mm size) to water band macadem(WBM) specification including spreading in uniform thickness ,hand packing , rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber. Applying and brooming stone screening to fill up the interstices of coarse aggregate, watering and compacting to the required density grade 2 as per technical clause 405(2) as per direction of engineer-in-charge.

Providing, laying, spreading and compacting stone aggregate of specific size (22.4-53 mm size) to water band macadem(WBM) specification including spreading in uniform thickness ,hand packing , rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber applying and grooming stone screening to fill up the interstices of coarse aggregate watering and compaction to the required density grade 3 as per technical clause 405(3) as per direction of engineer-in-charge.

Providing and applying primer coat with bitmin emulsion SS-1 on prepared granular surface cleaned with Hydraulic broom and spraying primer @ 0.70kg/sqm using mechanical meas as per Technical Specification. Clause 502 , MORD specification including cost of Bitumen as per direction of E/I.

Providing and applying Tack coat with Bitminous VG-10 using bitumen distributor at the rate of 0.30 Kg. per Sqm on the prepared primed surface cleaned with Hydraulic broom as per Technical Specification. Clause 503, of MORD specification including cost of Bitumen as per direction of E/I.

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm. to 5.60 mm. aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN. static roller capacity, finished to required level and grades to be followed by seal coat of type - C as per Technical Specification. Clause 508 case II-(1), of MORD specification including cost of Bitumen as per direction of E/I.

Providing and laying seal coat to sealing the voids in a bitumenious surface laid to the specified levels, grade and cross fall using Type 'C' as per Technical Specification. Clause 510, s.l. case III-(1) of MORD specification including cost of Bitumen as per direction of E/I.

Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @ 250 grams per sqm area thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC : 35-2015. The finished surface to be level , uniform and free from streaks and holes. Rates are inclusive of all taxes, royalty, material, labour and T&P required for proper completion of work as per direction of E/I.

M/S MANOJ TRADERS

Mahesh Chandra Sharma

M/s Kapil Kumar Sharma

RADHA CONSTRUCTION

GOMATINETRA CONSTRUCTIONS