8373 REPAIRS TO PATH, CULVERT, MISC WORK AND RELEVANT ITEMS UNDER AGE BR III SOUTH PUNE

Amount

Demolition of cement concrete in ground floors and paving not exc 15cm thick (below or above ground level) un-reinforced complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6) type B2 (using 20mm graded aggregate) as in plinth protection/hard standing, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base / flooring complete all as specified and as directed.

M&L for Chequered cement concrete tiles of 30cm X 30cm X 25mm thick, rubber moulded glossy finish set, jointed & pointed in neat cement slurry in floors (with grey cement & pigment) over and including 20mm thick screed bed in CM (1:6) complete all as specified & as directed.

M&L for precast concrete interlocking paver blocks glossy finish with approved shape and size conforming to IS-15658-2006, 60mm thick, M-30 grade with grey cement and pigment laid over & including 75mm thick stone dust/grit complete all as specified & as directed.

M&L for renewing cement concrete tiles in patches, area not exc 5 sqm including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete all as specified and as directed.

M&L for providing precast RCC (1:2:4) type B1 using 20 mm graded stone aggregate in manholes covers and slabs set in CM 1:4 complete all as specified and as directed.

M&L for mild steel TMT bars 8 to 10mm dia cut to length, bent to shape required, bending and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.

M&L for PCC nominal mix 1 : 1½ : 3 (20mm graded aggregate), 100mm thick as in paving complete all as specified and as directed.

M&L for Finishing surface of concrete roads, pavements, by brooming complete all as specified & as directed.

M & L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade A complete all as specified & as directed.

Demolition of brick work or stone/boulders masonry built in Cement Mortar complete all as specified and as directed.

Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. not exc 10 sqm on plan and not exc 1.5 m in depth and getting out in any type of soil incl removal of excavated soil upto a distance not exc. 50m and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed.

M&L for precast cement concrete block of type C-1 (1:3:6 mix) set in cement mortar (1:6) (using 20mm graded stone aggregates) complete all as specified and as directed.

M&L for rendering, 10mm thick, in CM (1:6) finished even and smooth without using extra cement complete all as specified and as directed

S&F in repairs PVC (SWR) pipes 110mm bore, single socketed in any length with rubber ring joints fixed to wall / ceiling or laid in trenches complete all as specified and as directed.

M & L for Reinforced concrete pipes 300mm dia, class NP3, laid and jointed complete with collars complete all as specified & as directed.

M & L for Reinforced concrete pipes 450mm dia, class NP3, laid and jointed complete with collars complete all as specified & as directed.

M&L for Plain Cement Concrete, (1:4:8 mix) Type D2, (Using 40mm graded crushed stone aggregates) for bedding & surrounding of pipes for RCC pipes, class NP-3 complete all as specified and as directed

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L for PCC (1:2:4) type B-1 using 20 mm stone graded aggregate as in benching, coping etc complete all as specified and as directed.

M&L for plain cement concrete 1:4:8 type D2 (using 20mm graded crushed stone aggregate) as in surface channels and drains (including necessary formwork) complete all as specified and as directed.

S&F in repairs Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles complete all as specified and as directed.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.

M & L for preparation of old paintd surfaces and apply one coat of Floor paint with ready mixed paint on floor complete all as specified & directed by Engineer-in-Charge.

M & L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290 Gde-E-165 complete all as specified & directed by Engineer-in-Charge.

Supply and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified & directed by Engineer-in-Charge.

Gauri Associates

A.S.ENTERPRISES

TULSAYA CONSTRUCTION

Raj Construction Company

PRASHANT CONSTRUCTION

Takshashila electricals

shiva traders

ANIL CONSTRUCTION CO.

M/S. AMERHAMZA GULAB SHAIKH