52(W)/EDCS/2024-25

Amount

Safe carriage including Loading/Unloading & proper stacking of following store materials from Store Centre to site of work (Approx. distance 90 Km.)

S.T Pole 11 Mtr long

PCC Pole 8.5 /9.0 Mtr long

Top Channel 33 KV

Top Channel 11 KV

Stay Set Complete

Earthing Set Complete

33/11 KV Poly. Disc Insulator

Dropper Channel 11/33 KV

33/11 KV Disc Fitting

11 KV Pin Insulator

11 KV Pin with Nut

Dog Conductor

11 KV V TYPE X-Arm

ACSR Weasel Conductor

33 KV XLPE Cable 3x300 mm2

Cable Jointing kit Out door 3*300SQ. MM. 33 KV

Cable Jointing kit ST THROUGHT 3*300SQ. MM. 33 KV

11 KV XLPE Cable 3x120 mm2

Cable Jointing kit Out door 11 KV 3*120 SQ. MM

S/S BASE ANGLE

ABC (3X50+1X35+1X16) SQ. MM

AB CABLE (1X16+1X25) SQ. MM

LT Cable AL. 3.5x150 SQMM

M S Angle Braching with Nut, Bolts & Clamps 65x65x6 mm

Danger Board

DEAD END CLAMP WITH EYE HOOK

DISTRIBUTION BOX 1- PHASE

SUSPENSION CLAMP WITH EYE HOOK

Stone Pad

Top & Dropper Chanel Clamp for STP

M.S. Nut & Bolt

M.S. Angle Bracing with Nut & Bolts (65x65x6)

Bracing Clamps 6.5 Inch Dia

Earth Wire Clamp with Nut Bolt

11 KV X-Arm holding Clamp

L.T. Clamp

F-Clamp

HDPE Pipe 160/150 MM

Cable Root Marka 33/11 KV

GI Barbed Wire

Aluminium Paint

Red Oxcide Paint

GI Pipe (6 inch dia)

S/S BASE ANGLE CLAMP

ALUMINIUM LUG 150 SQ. MM

Holding Clamp for Cable with nut and bolt

Errection/Laying Work

Fabrication, erection of Single pole for 11 KV line on STP 11 mtr long Pole with fixing of necessary clamps & other accessories like 1 no. 11KV V-type Cross arm,1 no. F-Clamp. Its grouting in ratio 1:4:8, plinthing 300 mm above ground level, painting of pole with one coat of red oxide & two coats of enamel paint (ISI mark) & earthing of support as per RESSPO Norms (All grouting & painting material shall be provided by the contractor.).

Fabrication, erection of Single pole for LT line on STP 11 mtr long Pole with fixing of necessary clamps & other accessories like L.T. Clamp, Earth wire Clamp etc. grouting in ratio 1:4:8, as per RESSPO Norms (All grouting material shall be provided by the contractor.).

Fabrication, erection of Double pole for 11 KV line on ST POLE 11.0 mtr long Pole with fixing of necessary clamps & other accessories like 1 no. Top Channel etc.. Its grouting in ratio 1:4:8, plinthing 300 mm above ground level, painting of pole with one coat of red oxide & two coats of enamel paint (ISI mark) & earthing of support as per RESSPO Norms (All grouting & painting material shall be provided by the contractor.).

Fabrication, erection of 33 KV double pole structure for end terminations on 11 M long ST Pole with fixing of necessary clamps & other accessories like 1 no. Top channel 3200x125x65 mm, MS Angle Cross Bracing. Its grouting in ratio 1:4:8, plinthing 300 mm above ground level, painting of pole with one coat of red oxide & two coats of enamel paint (ISI mark), earthing of support as per RESSPO Norms & one side cable expose for road crossing (All grouting material shall be provided by the contractor.).

Fabrication, erection of double pole structure suitable for 25 to 63 KVA T/F on 8.5 M long pcc Pole with fixing of necessary clamps & other accessories like 1 no. Top channel 2240x100X50 mm, MS Angle . Its grouting in ratio 1:4:8, as per RESSPO Norms (All grouting material shall be provided by the contractor.)

Erection/Fixing for stay set with stay wire and clamp as per RESSPO drawing including binding. Climbing, clamping, tightening and nozzeling etc. complete in all respect including its grouting in ratio 1:4:8 before back filling of the pits as per RESSPO, cement, brick, concrete ballast, sand and etc would be provided by the contractor for 33/11 KV single support, double pole and four pole structure.

Stringing and sagging of 11 KV overhead line on ACSR Weasel Conductor as per RESSPO Norms.

Layig of (double ckt) 33 kv xlpe cable 3*300 sq mm. in hdpe pipe 6 inch dia (160/150 mm) by trenchless technology method by horizontel drilling system

Hoisting of 3*300 sq. mm 33 kv xlpe cable on double pole with G.I. Pipe of size 6 inch dia including its jumpering complete with clamps nut &bolts

Layig of (double ckt) 11 kv xlpe cable 3*120 sq mm. in hdpe pipe 6 inch dia (160/150 mm) by trenchless technology method by horizontel drilling system

Hoisting of 3*120 sq. mm 11 kv xlpe cable on double pole with G.I. Pipe of size 6 inch dia including its jumpering complete with clamps nut &bolts

Layig of (double ckt) LT Cable AL. 3.5x150 sq mm. in hdpe pipe 6 inch dia (160/150 mm) by trenchless technology method by horizontel drilling system

Hoisting of LT Cable AL. 3.5x150 sq mm on double pole with G.I. Pipe of size 6 inch dia including its jumpering complete with clamps nut &bolts

Fixing of danger board on each location & g.i berbed wire

Fixing of Cable Root Marka 33/11 KV on each location

Makng of Cable Jointing kit straight through 11 kv 3x120 mm2

making of Cable Jointing kit Out door 3*300SQ. MM. 33 KV

making of Cable Jointing kit Out door 11 KV 3*120 SQ. MM

fixing of 1- phase distribution box

earthing of transformer & double pole

INSTALLATION OF V-TYPE CROSS ARM , GUARDING ANGLE & CLAMPS ETC.

Stringing and sagging of L.T. line on Cable LT abc(3*50+1*35+1*16) sq. mm as per RESSPO Norms.

Stringing and sagging of L.T. line on Cable LT abc(1*25+1*16) sq. mm as per RESSPO Norms.

Dismantling and removing of Following Lines as per norms complete in all respect -

Dismentling of 11 kv line lenth appox. 320 Ckt. Mtr. along with accessories

Dismentling of 33 kv line lenth appox.320 Ckt. Mtr. along with accessories

Dismentling of lt line Corrsing lenth appox. 400 Ckt. Mtr. along with accessories

Guarding of 11 KV Line

Recd. Back of 33 kv line lenth appox. 320 Ckt. Mtr.

Recd. Back of 11kv line lenth appox. 320 Ckt Mtr.

Recd. Back of lt line lenth appox. 350 Ckt. Mtr.

M/S HINA ELECTRICALS

M/s Shubham Traders