Construction of Anpurna bahwan ward 12 IN CSC

Clearing Jungle including uprooting of Trunk vegetations ,grass,bush,wood trees and saplings of girth upto 30 cm. measured at a height of 1 metre above ground level & removal of rubbish upto a distance of metres out side

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge D.S.R 2023 2.6.1

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (M-20) (1 cement: 1.5 coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (M-20) (1 cement: 1.5 coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources)D.S.R.2023 5.3

8 Steel reinforcement for R.C.C. work including straightening, cutting. bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-5000 or more.

Brick work with common burnt clay F.P.S. (non modular) bricks designation 7.5 in superstructure above plinth level up to floor all shapes and sizes in : 1:4 (1 :Cement :4 coar sand )D.S.R.2023 .6.4.1

Mild steel or irom work of small size and sections such as holding down bolts, hold fast, tie road grating etc (when not included in an overall rates) wrought to required shape as necessary for bedning etc including supply of steel and its wastage including cost of bolts nuts if required welding grinding and making holes sas required for completion of work. .As D.S.R 10.13

12 mm cement plaster of mix: 1:6 (1) cement: 6 coarse sand) (Interior Plaster)

Providing and appling Plaster of parise Putty of 2 mm thikness over Plastered surface to perpare the surface even and smooth Complete

Finishing walls with water-proofing on cement paint of approved make such as super snowcem, durrocem, robiacem, guttucem supercem quality and of required shade on undecorated wall surfaces (two coat) overone and including one coat white cement primer to give an even shade after thoroughly brushing the surface to powdered materials including curing and cost of all materials.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 Itr/10 sqm over an under coat of primer applied @ 0.80 Itr/10 sqm of approved brand and manufacture DSR 2023, 13.48.3

Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc, complete.

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 part 1 and M.S. top cover of required thickness for rolling shutters.D.S.R 2023.10.6

Providing and Fixing Ball Bearing For roller Shutter D.S.R 2023 .10.7

Extra for providing mechanical device chain and crank operation for operating rolling shutters.D.S.R 2023 .10.8.1

Providing and Fixing Top Cover 18 gauge roller Shutter (As par market Rate)

E/w in cutting or filling embankment with ordinary soil in 20 cm. layers compacting to meet requirment including ramming and dressing of surface to requried levels and slopes and also including 1.5 mt. lift and cartage distance 3.00Km.including

S/F of PVC pipe 110mm dia.6 kg Pressure.

Provision for writing charge at site

Provision for Electricfication

Provision for sign board at site.

Please Enable Macros to View BoQ information