REPAIR/ REPLACEMENT OF UNSV COLUMN PIPES OF BORE WELLS, SUBMERSIBLE CABLES, REPAIR/ REWINDING OF BOREWELL MOTORS AND PUMP SETS AND COMPREHENSIVE MAINTENANCE OF RO WATER PLANT THROUGH OEM AND CONNECTED MISC E/M WORKS AT BASE HOSPITAL UNDER GE (E/M) BH

Amount

Supply, laying, connecting and testing in repair ductile iron (DI) pipe, 100 mm bore, with spigot and socket ends, conforming to IS: 8329/2000 classification, medium grade (K7 class), with screwed and socketed joints, suitable for push-on-joint (Rubber gasket-D jointing) with cement mortar lining inside the pipes and outside zinc coating with bituminous finish coat as per IA 8329/2000 including EPDM rubber joints conforming IS: 5382 of 1985, laid in trenches or laid in floor, including making good the disturbed surface including taking out old rusted/ unserviceable GI/CI/DI pipe 100 mm inner dia by unscrewing and cutting complete all as specified and as directed.

All as per Ser item No 1.00 here-in-before but size 150 mm bore complete all as specified and as directed.

S&F in repair ductile iron fittings for pipe i.e. bends (any type, radius and angle), tapers any type (straight, bends, increasing, decreasing or double socket etc) tee pieces, single branch, "Y" junction, double branch, collars, caps, plugs etc for spigot and socket/flanged ends suitable for up to 150 mm bore pipe, conforming to IS specification complete all as specified and as directed.

Supplying & Fixing, in replacement of cast iron Sluice Valve of dia 250 mm ISI marked (PN-1.0) confirming to IS 14846-2000, flanged ends drilled having stainless steel spindle with cast iron wheel at top complete with nuts, bolts, washers and gaskets complete all as specified.

All as per Ser No 4.00 here-in-before but suitable for 200 mm bore pipe complete all as specified and directed.

All as per Ser No 4.00 here-in-before but suitable for 150 mm bore pipe complete all as specified and directed.

All as per Ser item No 4.00 here-in-before but suitable for 100 mm bore pipe complete all as specified and as directed.

All as per Ser item No 4.00 here-in-before but suitable for 80 mm bore pipe complete all as specified and as directed.

All as per Ser item No 4.00 here-in-before but suitable for 65 mm bore pipe complete all as specified and as directed.

Taking down wall mounted RO of capacity - 50LPH including opening and taking out the filters & accessories and cleaning, servicing the filters, membrane and other connected items, refixing the same after repairs at the existing position complete all as specified and as directed.

S&F in replacement SP Plastic pipe -5.00 Metre, SS Ball valve-03 Nos, SP 3 way connector (Brass) -02 Nos, NRV Space - 02 Nos , float valve-02 Nos, float sensor - 02 Nos, & SP carbon block - 02 Nos suitable for 50 LPH capacity Kent RO plant complete all as specified and as directed.

S&F in replacement filter cartridge Sediment-01 No, Activated Carbon-01 No, UF- 01 No, post carbon filter -01 No, suitable for 50 LPH Kent RO, Patent No.-199716 having Auto flushing system, inlet water pressure / temp (min)- 0.3 Kg/Sqcm /10 0 C & inlet water pressure / temp (max)- 4Kg/Sqcm / 40 0 C, PH range-6.5 to 8.0, including all connection, elbow, Pushin elbow, reducers, raiser tube BB, funnel, multiport valve BB fittings etc complete all as specified and as directed. Make:- Kent/ Ion Exchange/ Thermax

S&F in replacement thin film composite RO type Membrane having UF membrane- 0.1-0.01 micron including SP membrane housing suitable for 50 LPH Kent RO, Patent No.-199716 including all connection, elbow, fittings etc complete all as specified and as directed. Make:- Kent/ Ion Exchange/ Thermax

S&F in replacement SP SMPS, 2.5A, 24V DC (Adaptor) suitable for 50LPH Kent RO, Patent No.-199716 including connection & fittings etc complete all as specified and as directed. Make:- Kent/ Ion Exchange/ Thermax

S&F in replacement BNQS SP diaphragm 300 GPD pump, 24V, 2.5A, single phase supply, Maximum power consumption -120W, suitable for 50LPH Kent RO, Patent No.-199716 including connection & fittings etc complete all as specified and as directed. Make:- Kent/ Ion Exchange/ Thermax

S&F in replacement SP Needle control valve-01 No & SP UV Lamp-01 No, suitable for 50LPH Kent RO, Patent No.-199716 including connection & fittings etc complete all as specified and as directed. Make:- Kent/ Ion Exchange/ Thermax

S&F in replacement 200 Litre capacity Rotational moulded polyethylene water storage tank, triple layered, food grain plastic (rectangular shape with closed top), hoisted and fixed in position on existing wall, stage, roof or RCC staging complete all as specified in SSR Part-I including supply and connecting tank nipple, float valve etc., making complete connection of inlet and out let pipe, fixing of GI pipe (over flow) & washout to the nearest rain water drain complete all as specified and as directed.

Supply only discealing chemical SERCON -201 suitable for membrane of 500 LPH RO Plant complete all as per specified and as directed. Make- ION EXCHANGE/ THERMAX/ UV RICH

Supply only discealing chemical SERCON -202 suitable for membrane of 500 LPH RO Plant complete all as specified and as directed. Make- ION EXCHANGE/ THERMAX/ UV RICH

Supply and fixing D Joint ISI marked suitable for 150mm bore DI/CI/GI pipe including rectify the leakage of pipe with nut-bolts, fittings etc complete all as specified and as directed.

All as per Srl item No. 20.00 here-in-before but suitable for 100 mm bore pipe complete all as specified and as directed.

All as per Srl item No. 20.00 here-in-before but suitable for 80 mm bore pipe complete all as specified and as directed.

All as per Srl item No. 20.00 here-in-before but suitable for 50 mm bore pipe complete all as specified and as directed.

All as per Srl item No. 20.00 here-in-before but suitable for 40 mm bore pipe complete all as specified and as directed.

Disconnection of electric connection from LT control panel & starter of submersible pumping set, any size and removing the pipe line connection from discharge side, taking out submersible pumping set along with column pipe from bore well with the help of chain pulley block including transportation to workshop for repair complete all as specified and as directed.

Lowering of submersible pumping set any size after repair and re-connecting with existing pipe and making electrical connection with the panel board, making water proof joint of submersible cable including replacement of rusted nuts, bolts, rubber gasket and clamp including transporting from workshop after repair complete all as specified and as directed. Note: Spare parts used in repair/replacement shall be paid separately under respective item of this schedule.

Supply, laying, connecting and testing in repair, 80 mm bore, GI column pipe, heavy duty, classic, confirming to IS-1239 with heavy grade flanges welded to MS column pipe at both end, thickness of flange 10 mm including all necessary cutting in flange for passing of submersible cable including all jointing material such as nuts, bolts, washers & pacing sheets complete all as specified and as directed.

Supply and fixing in repair Altoch dosing system spares i.e. gears rotor aasembly, motor, blades, pipe tube fittings also for Altoch Dosing System Model No-ADS-1, with complete all as specified and directed.

S & F in replacement Gun metal Ball valve suitable for 50 mm bore pipe complete all as specified and directed.

All as per Srl item No 29.00 here-in-before but suitable for 40 mm bore pipe complete all as specified and directed.

All as per Srl item No 29.00 here-in-before but suitable for 25 mm bore pipe complete all as specified and directed.

All as per Srl item No 29.00 here-in-before but suitable for 20 mm bore pipe complete all as specified and directed.

All as per Srl item No 29.00 here-in-before but suitable for 15 mm bore pipe complete all as specified and directed.

S&F in replacement CI foot valve suitable for 150 mm bore pipe flange type including nut, bolts & washers etc complete all as specified and directed.

All as per Ser Item No 34.00 here-in-before but suitable for 80 mm bore pipe complete all as specified and directed.

S&F in replacement non return valve suitable for 150 mm bore pipe flange type including nut, bolts & washers complete all as specified and as directed.

All as per Ser Item No 36.00 here-in-before but suitable for 100 mm bore pipe complete all as specified and directed.

All as per Ser Item No 36.00 here-in-before but suitable for 80 mm bore pipe complete all as specified and directed.

S&F in replacement of pressure pump single phase, 240 V, 0.5 HP, pressure tank capacity - 08 Ltr running bar max flow - 2800 Ltr/ 2 Hrs, Model: P-500, 8 Ltr Q-20-50 Ltr/min Head - 46 mtr size of inlet/ outlet pipe 25 mm x 25 mm including necessary GI tubing connection for incoming / outgoing supply with GI tubing 15 mm bore. Make- Kirloskar/ CG/ Tycoon

S&F in replacement of pressure pump single phase, 240 V, 1 HP, pressure tank capacity - 19 Ltr running bar max flow - 3300 Ltr/ 2.5 Hrs, Model: J-600, 19 Ltr Q-20-50 Ltr/min Head - 46 mtr size of inlet/ outlet pipe 25 mm x 25 mm including necessary GI tubing connection for incoming/ outgoing supply with GI tubing 15 mm bore. Make- Kirloskar/ CG/ Tycoon

Earthing complete with galvanised steel earth electrode 60 cm X 60 cm X 6 mm burried direcxtly in ground vertically to depth not less than 2.25 m below normal ground level with top edge of the earth plate at a depth not less than 1.5 below ground level connected to and including GI strip of size 32 X 6 mm by means of nut, bolt, check nut and washer etc made of GI and connection to test point and earth dolly all as shown in electrical plate No 5 SSR Part I 2009 and specified or indicated including excavation and earth work in any type soil PCC (1:3:6) type C-1 chamber, precast 50 mm thick in cement concrete (1:2:4) type B-1 with with CI frame, funnel, GI pipe 20 mm bore medium grade for watering and 40 mm bore GI pipe medium grade for protection and test point complete including dismantling old earthing complete all as specified and directed.

S&F in replacement Aviation obstruction light, neon lamp 75VA, Aviation yellow painted die-cast aluminium alloy housing, built in 75VA step up transformer, heat resistant, clear thick glass and accessories, fixed at 18 to 21mtr overhead tank including all fitting with angle/clip/bolt/or iron/ Welding work complete all as specified & directed. Make- Bajaj Cat Part No. 20075, BJAOL type 1 or equivalent model of Make mentioned in PS.

Supply only RO Antiscailent - 8211 suitable for RO Plant complete all as per specified and as directed. Make- ION EXCHANGE/ THERMAX/ UV RICH

Supply only Liquid chlorine suitable for RO Plant complete all as per specified and as directed. Make- ION EXCHANGE/ THERMAX/ UV RICH

Supply only PH Booster suitable for RO Plant complete all as per specified and as directed. Make- ION EXCHANGE/ THERMAX/ UV RICH

Collecting Water sample from Various wards and pump house quaterly as directed by Engr-in-Charge and carried out Chemical/ Bacteriological Analysis and Portability Test of water through Sriram Test Lab/ Micro-Engineering Testing Lab/ Bharat Testing Lab and submitting the report to Engr-in-Charge complete all as specified and as directed. Note: The testing is to be carried on Quarterly basis. It the contractor fails to carry out test a recovery of Rs 100/- per day per sample shall be recoverd from contractor dues.

Supply, laying and testing in replacement GI water tubing 100 mm bore, medium grade with all fittings with screwed and socketed joints and fixed in trenches and making good the disturbed surface complete all as specified and directed.

All as per Srl item No. 47.00 here-in-before but 80 mm bore complete all as specified and directed.

All as per Srl item No. 47.00 here-in-before but 50 mm bore complete all as specified and directed.

All as per Srl item No. 47.00 here-in-before but 40 mm bore complete all as specified and directed.

All as per Srl item No. 47.00 here-in-before but 25 mm bore complete all as specified and directed.

All as per Srl item No. 47.00 here-in-before but 20 mm bore complete all as specified and directed.

All as per Srl item No. 47.00 here-in-before but 15 mm bore complete all as specified and directed.

S & F in repair Unplasticised PVC pipes of single socketed of 200mm dia in any length with rubber ring jointed and connected accessories of 10KG/CM2, fixed on wall or laid floor/trench complete all as per specified and directed.

All as per Ser Item No 54.00 here-in-before but size 180mm complete all as per specified and directed.

S&F in repair Unplasticised PVC bends 180 to 225 mm bore any radius fixed to wall or floor complete all as specified and directed.

S&F in repair clamp for fixing 180mm dia Half round UPVC pipe with connected accessories like anchor fastener, pipe clamp, angle iron work at a height 1-6 mtr from bottom complete all as specified and directed.

S&F in repair Unplasticised PVC branch piece, single equal tee of 180mm dia fixed to wall or floor complete all as specified and directed.

S&F in repair Unplasticised PVC pipes Half round type 180mm dia use as open channel to collect the rain water from the roof at a height of 1- 6mtr from bottom of single socketed in any length with rubber ring joints and connected accessories, fixed on side of shed or laid in floor complete all as specified and as directed.

S&F in repair Unplasticised PVC tee of size 110mm to 180mm for connection of half round pipe to down pipe fixed to wall or floor complete all as specified and as directed.

S & F in replacement multigrade pressure sand filter (MGF) of vertical cylindrical FRP pressure vessel with dished ends, flow rate- 2 Cum/Hr, size of filter- 13" x 54", Maximum operating pressure 3.00 Kg/Sqcm, test pressure 5.0 Kg/Sqcm, suitable for 500 LPH RO plant, Modal- INDROMATIC-403, Make- Ion exchange complete with initial charge of graded filter sand and underbed material with internal distribution and collection systems with complete set of frontal piping and valves i.e. inlet, outlet, drain, overflow, backwash lines and associated valves, pressure gauges including supporting lugs (for embedding in concrete foundation) and fixing on floor complete as required. The pressure vessel shall be epoxy food grade coated from inside and painted with two coats of enamel paint of approved shade over a coat of red oxide primer outside. Velocity in frontal piping and valves- 1.50 Metre/Sec complete all as specified and as directed. Make- ION EXCHANGE/ THERMAX/ UV RICH

Supply, fixing, testing and commissioning in replacement activated carbon filter (ACF) flow rate- 2 Cum /Hr, size of filter- 13" x 54", Maximum operating pressure 3.00 Kg/Sqcm, test pressure 5.0 Kg/Sqcm, suitable for 500LPH RO plant, Modal- INDROMATIC-403, Make- Ion exchange, complete with initial charge of graded filter sand and underbed material with internal distribution and collection systems with complete set of frontal piping and valves i.e. inlet, outlet, drain, overflow, backwash lines and associated valves, pressure gauges including supporting lugs (for embedding in concrete foundation) and fixing on floor complete as required & the pressure vessel to be epoxy food grade coated from inside and painted with two coats of enamel paint of approved shade over a coat of red oxide primer outside. Velocity in frontal piping and valves- 1.50 Metre/sec complete all as specified and as directed. Make- ION EXCHANGE/ THERMAX/UV RICH

S&F in replacement special anti scalent dosing system consisting of one HDPE tank of 100 litres capacity with a positive displacement diaphragm dosing pump having variable flow rate of (0-6 LPH), suitable for 500LPH RO plant, Modal- INDROMATIC - 403, Make- Ion exchange, including motor suitable for operation at 240V, single phase, 50 Hertz supply complete with necessary polypropylene piping, valves, strainers & injection fittings for automatic dosing including testing and commissioning complete all as specified and as directed. Make- ION EXCHANGE/ THERMAX/ UV RICH

Supply, fixing, testing and commissioning in replacement Micron Cartridge Filter suitable for 500LPH RO plant, Modal- INDROMATIC-403, Make- Ion exchange, for flow rate of 6 Cum/Hour, to achieve particle filtration less than 5 micron, including complete unit comprising of Polypropylene (PP) Housing and spun wound polypropylene cartridge, built in pressure relief valve complete with inlet & outlet branches, removable caps for replacement of cartridge, inlet & outlet pressure gauge (one for the Feed line and for CIP System) complete all as specified and directed. Make- ION EXCHANGE/ THERMAX/ UV RICH.

Supply, fixing, testing and commissioning in replacement R.O. High Pressure Feed Pumps of positive displacement multi-stage, centrifugal type, pumping head 120m - 01No, pump flow rate Cum /Hour, suitable for a flow rate of 3000 LPH, suitable for RO plant 500LPH, Modal- INDROMATIC-403, Make- Ion exchange, having pump construction Stainless steel (S.S. 316) & impeller stainless steel (S.S. 316) and motor TEFC suitable for a supply of 440V, 3 phase, 50 Hertz supply including interconnecting pipes, non return ball/butterfly valves fittings and coupling all mounted on base channel with foundation bolts, & pressure gauges at inlet & outlet of each pump complete all as specified and as directed. Make- ION EXCHANGE/ THERMAX/ UV RICH.

Supply, fixing, testing and commissioning in replacement indoor package type Reverse Osmosis Modules [R.O. Membranes + R.O. Pressure Tube] suitable for RO plant 500LPH, Modal- INDROMATIC-403, Make- Ion exchange of capable to give a net treated water output of 500 LPH, Reverse Osmosis membrane shall be made out of spiral wound multilayer cross linked membrane composite suitable to withstand a pressure of 20 Kg/Sqcm, suitable BSPT/NPT connections used for connecting feed and reject ends. The FRP composite modules shall be complete with all interconnection, necessary instrumentation, valve for sampling, drain, reject & permeate complete all as specified and as directed.

Supply, fixing, testing and commissioning in replacement pH correction system comprising of one No. HDPE (100 litters capacity) dosing tank, having positive displacement diaphragm dosing pump having variable flow rate (0-6 LPH) suitable for RO plant 500LPH, Modal- INDROMATIC-403, Make- Ion exchange, motor suitable for operation at 240V, single phase, 50 Hertz power supply. The pump shall be supplied complete with necessary polypropylene piping, valves, strainers & injection fitting for automatic dosing complete all as specified and as directed. Make- ION EXCHANGE/ THERMAX/ UV RICH

Supply, fixing, testing and commissioning in replacement Flow meter (Rota meter) to measure and control the flow of feed/ product stream/reject stream suitable for RO plant 500LPH, Modal- INDROMATIC-403, Make- Ion Exchange, complete all as specified and as directed.

Supply, fixing, testing and commissioning in replacement Burden type, 150 mm, Pressure gauges made out of SS 316 (glycerin filled), suitable for RO plant 500LPH, Modal- INDROMATIC-403, Make- Ion Exchange complete all as specified and as directed.

Supply, fixing, testing and commissioning in replacement On Line Panel mounted digital TDS meter/Conductivity meter (Range 0-1000 PPM), (At RO Outlet) suitable for RO plant 500LPH, Modal- INDROMATIC-403, Make- Ion Exchange complete all as specified and as directed.

Supply, fixing, testing and commissioning in replacement Pressure switches to control pressure and give high/low pressure trip(Range : 0-450 PSI) suitable for RO plant 500LPH, Modal- INDROMATIC-403, Make- Ion exchange complete all as specified and as directed.

Supply, fixing, testing and commissioning in replacement Level switches, to control water level in the output storage tanks & domestic water storage tank, suitable for RO plant 500LPH, Modal- INDROMATIC-403, Make- Ion exchange complete all as specified and as directed.

S&F in replacement Chlorine dosing system, consisting of one FRP/ HDPE tank of 100 litres capacity with a positive displacement diaphragm Dosing pump with a variable flow rate of 0-12 LPH, motor suitable for operation at 240 V, one Phase, 50 Hertz, with necessary poly propylene piping, valves, strainers & injection fittings for system to dose solution to the feed line, as per specification suitable for RO plant 500LPH, Modal- INDROMATIC-403, Make- Ion exchange complete all as specified and as directed.

M&L for dewatering, cleaning of RO Water service tanks quaterly with high pressure water jet to remove all masses, algae and dirt and removal of dirty water alongwith sludge using sludge machine and disposal of the same to a safe distance and applying of anti bacterial sterlization spray to walls, floors and ceilings and pour water purifier bleaching powder to the tank and clean manually and drainout the dirty water complete incl cleaning of outlet pipe upto stop cock/gate valve by removing and refixing the same and making the line serviceable after cleaning, ensure that no interruption of water supply system to users including marking on the tank on the date of cleaning all as specified of RO/RAW WATER PVC tanks of capacity 5000 Ltrs complete and directed.

All as per Ser Item No 74.00 here-in-before but capacity 2000/1000ltr complete all as per specified and directed.

All as per Ser Item No 74.00 here-in-before but capacity 200ltr complete all as per specified and directed.

Supply laying, connecting and testing in replacement, 3 layer PP-R (Polypropylene random co polymer) pipes 50 mm bore, SDR 7.4 & SDR 11, UV stabilized and antimicrobial welded, having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings, fixed complete to walls, ceiling or in floors or laid in trenches etc. including complete fitting and making good the disturbed surface complete all as specified and as directed.

All as per Srl item No. 77.00 here-in-before but 40 mm bore complete all as specified and as directed.

All as per Srl item No. 77.00 here-in-before but 25 mm bore complete all as specified and as directed.

All as per Srl item No. 77.00 here-in-before but 20 mm bore complete all as specified and as directed.

All as per Srl item No. 77.00 here-in-before but 16 mm bore complete all as specified and as directed.

S & F in replacement PP-R Ball valve, suitable for 40 mm bore pipe, (brass insert) as per site requirement complete all as specified and as directed.

All as per Srl item No. 82.00 here-in-before but suitable for 25 mm bore pipe complete all as specified and as directed.

All as per Srl item No. 82.00 here-in-before but suitable for 20 mm bore pipe complete all as specified and as directed.

Excavation in trenches, not exceeding 1.5 m wide & not exceeding 1.5 mtr in depth for laying of GI/CI Pipes etc not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out complete all as specified and directed.

Removing excavated material to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Supply only CALCIUM HYPO CHLORITE 65% to 70% (Calcium based granular disinfectant for water treatment more stable than Chlorine Gas, and stronger than Bleaching Powder, and Sodium Hypochlorite) and contained appropriate quantities of dispersants/corrosion inhibitors to prevent encrustation/scaling in distribution system packed in 40/45 Kg Plastic Drums and contain complete all as specified and directed. Note: (i) Make of CALCIUM HYPO CHLORITE granules shall be as approved by Delhi Jal Board. (ii) Supplier or contractor must submit test certificate from the govt. certified labs/ Institute.

S & F in replacement Power Contactor type MNX, 40 Amp, MNX-40 complete all as specified and directed.

S & F in replacement Power Contactor type MNX, 25 Amp, MNX-25 complete all as specified and directed.

S & F in replacement Power Contactor type MNX, 18 Amp, MNX-18 complete all as specified and directed.

S & F in replacement Single Phasing Preventer 415 V, 50 Hz, Phase Failure Relay, complete all as specified and directed. (Make- Minilec Protective Relay Put Ltd Model: VSP2 or equivalent model of L&T/ Siemens)

S&F in replacement MCCB 4 Pole, 415 Volt fixed type 125 Amps with breaking capacity 16 KA complete all as specified and directed.

S&F in replacement MCCB 4 Pole, 415 Volt fixed type 25 Amp to 100 Amps with breaking capacity 16 KA complete all as specified and directed.

S & F in replacement Thermal Overload relay with Start & Off/Reset MN-2, Range: 14.0 – 23.0 Amp, complete all as specified and directed. (Make- Siemens Cat No. SS94144 or equivalent model of L&T/ Schneider)

S & F in replacement of Analog Time Switch FM/1 QUARTZ 240 VAC, 50/60 Hz Type: QT (Daily) for 24 Hrs, complete all as specified and directed. (Make- Siemens Cat No. J648B1 (P) or equivalent model of L&T/ Schneider)

Boring of holes under road/pavement hard standing up to 3mtr depth by trenchless technology using ultra sound technique and using GPRS technique for without damaging nearby existing pipe lines, gas pipe lines, power cables, sewage lines etc and necessary machine for laying/ insertion of HDPE pipe 100MM Dia PN-10 working pressure for casing and including labour work of laying PP-R pipe through casing pipe including jointing the pipes with clamp, socketed joints, reducers etc & testing, commissioning also with complete all as specified and as directed. Note: The cost of HDPE pipes 100mm, GPRS and ultra sound technique is also included in this quoted rate.

Opening the electric monoblock motor of capacity 2HP and taking out the unserviceable winding wire complete and cleaning the slots, rewinding the motor with super enamelled copper winding wire of gauge same as existing gauge including all other insulating material, (i.e. cotton tap, PVC tap, PVC sleeve glass pipe, varnish) complete all as specified and as directed.

Opening the electric monoblock motor pump of capacity 2HP and repair the pump with replacement unsv gland, impellor, bush, nut bolt etc including transoporting and refixing complete all as specified and as directed.

Opening the electric monoblock motor pump of capacity 1HP and repair the pump with replacement unsv gland, impellor, bush, nut bolt etc including transoporting and refixing complete all as specified and as directed.

Opening the electric monoblock motor of capacity 1HP and taking out the unserviceable winding wire complete and cleaning the slots, rewinding the motor with super enamelled copper winding wire of gauge same as existing gauge including all other insulating material, (i.e. cotton tap, PVC tap, PVC sleeve glass pipe, varnish) complete all as specified and as directed.

M&L in replacement for burning out lead joint in any position including removing old lead joint and making new lead joint by using retrived lead and new lead approx 700gms for CI/DI pipe of 150mm bore complete all as specified and directed.

M&L in replacement for burning out lead joint in any position including removing old lead joint and making new lead joint by using retrived lead and new lead minimum 450 gms for CI/DI pipe of 100mm bore complete all as specified and directed.

M&L in replacement for burning out lead joint in any position including removing old lead joint and making new lead joint by using retrived lead and new lead minimum 350 gms for CI/DI pipe of 80mm bore complete all as specified and directed.

Supply only Lead wool complete all as specified & directed.

M&L in repair Gland dori as per requirement & directed.

S&F in replacement of PVC tank double layer of capacity 5000 ltrs including connection inlet- outlet, airvent pipe will be measured in concerned items.

Supply only industrial salt as per sample for water treatment plant complete all as specified and directed.

sony engineering works

Saini Enterprises