8782/GWL/E8 REPAIR AND MAINT OF STREET LIGHTS AT OFFRS ENCLAVE AND MH AREA MORAR CANTT UNDER GE GWALIOR

Amount

Taking down u/s LED/HPSV/HPMV Security light fittings of any wattage from Poles any hieght or any descripion, for repairs, dismantling the light fitting part by part, replace the unsv parts like PVC line connector, Connection cable, LED drivers etc,reassembleing complete & refixing at the existing place or other place as directed by Engr-in-charge. Note: (i) The Contractor must be disconnecting/remove UNSV Security lights from pole, Remove carbon from conductor, replace PVC connector & connecting wire as required length for every fittings (ii) Electrical connection should be made with 3 core 2.5 sqmm aluminium wire from junction box to light point i e Phase, neutral & Earth, proper earthing to LED fittings (iv) Quoted rates shall be included for replacement of PVC line connector 3 trminal, PVC wire 3 core with aluminium conductor and other minor accessories. (v) Major items like LED driver, will be measured and paid separately.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium stranded conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 2 core 10 sqmm nominal cross section complete all as specified and directed by Engr-in-charge.

Supply only LED drivers for LED Street light fittings of 72 watt & 90 Watt suitable as per existing Street light fittings complete all as specified and directed by Engr-in-charge. Make of drives: Helonix, Bajaj, CG.

S & F PVC Three core Aluminium conductor wire over all sheaathed of size 2.5 Sqmm alongwith PVC pipe for protection from junction box to bracket and connected one end with aluminium thimble to busbar and other with PVC connector for Security light connection completeall as specified and directed by Engr-in-charge. .

Supply and fixing of 70 Watt new generation energy saving and environmental friendly long life LED street light made up of pressure dia cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP OPENING separate driver compartment with IP 66 protection and impact resistance of IK 07 with 10 KV Built-in-SPD.

Supply and fixing of 90 Watt new generation energy saving and environmental friendly long life LED street light made up of pressure dia cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP OPENING separate driver compartment with IP 66 protection and impact resistance of IK 07 with 10 KV Built-in-SPD.

Supply, & Fixing of weather/ dust, vermin proof LT junction box factory made out of CRCA sheet 2mm thick complete with inside, outside powder coated, rubber gasket packing with suitable size with 50 amps TPN aluminium busbar duly insulated (including self insulated) maintaining proper space for each busbar, & proper arrangement for passing incoming/ outgoing LT cable and fixed to pole with 02 Nos MS clamps, Nuts bolts and washer etc complete including self closing locking arrangement complete all as specified and directed by engineer in charge.

M&L for GI Brackets bending & shaping of size 32 mm dia galvanised iron pipe light grade over all length 0.60 mtr including necessary clamps, brackets and bolts etc to fixing on pole complete all as specified and directed.

Supply and fix in repair of automatic street light/security light switch using nature switch for automatic switching of street lights base on LUX level of Natural light. The infrared sensor based nature switch alongwith suitable power contactors and MCBs (Input-Output) should be enclosed in pole/wall mountable enclosure made of rust proof, electric shock proof, termite proof and FR grade SMC junction box conforming to IP 66. The contacor, MCB and copper circuit wiring (min 6 Sqmm) should suitable enough to take 3 phase load of 1 KW, contactor rating 10-15 Amps per phase, MCB (SP) RATING 32 Amps (03 Nos).

Supply and fixing All in one integrated Solar Street light of capacity 30 W in extruded aluminium construction with high effieciency monocrystaline silicon photo coltaic panel, High Efficiency SMD LEDs 6500 K having secondary lens optics for street lighting distribution, high performance lithium battery MPPT charge controller and intelligent control module/sensor with higher reliability, long service life, suitable for easy and quick installation.

Taking out unserviceable 30 Watt All in one street light for repair & refixing after repair as per existing make complete all as specified and directed. Note:- Major items i.e Solar panel & Converter, Battery and LED Drivers as per existing make / manufactorur specification shall be measured and paid separately in item No. 11.01 to 11.03.

Supply only Solar Panel & Converter suitbale for 30 watt All in one Solar street light.

Supply only Battery suitbale for 30 watt All in one Solar street light.

Supply only LED drivers suitbale for 30 watt All in one Solar street light.

anand enterprises

M/S SANTOSH CONSTRUCTION CO

POONAM ELECTRIC INDUSTRY

M/s Tirupati construction

keerti enterprises

M/s Pal Construction

BHARADWAJ BROTHERS

KP ELECTRICAL AND AUTOMATION

JAI SHITLA CONSTRUCTION COMPANY

M/s raj construction

PRAGATI ELECTRICALS AND ELECTRONICS

OLIVE EXPORTS PVT LTD