Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.5 LAccepted-AOC KRISHNA S NO 15 6A PLOT 26 KALPATARU COLONY B WARJE NAKA PUNE 411 052 | PUNE | MAHARASHTRA | 411052 | L1 | Accepted-AOC Awarded as first lowest bidder | |
| 2 | L2₹40.3 L+₹4.0 L (10.9%)Rejected-AOC FLAT NO 10 S NO 98 PLAT NO 78 SAI SAYAJI PARK A RIGHT BHUSARI COLONY KOTHRUD PUNE 411 038 | PUNE | MAHARASHTRA | 411038 | L2 | Rejected-AOC Second lowest bidder | |
| 3 | L3₹48.6 L+₹12.2 L (33.6%)Rejected-AOC FLAT NO 10 S NO 98 PLAT NO 78 SAI SAYAJI PARK A RIGHT BHUSARI COLONY KOTHRUD PUNE 411 038 | PUNE | MAHARASHTRA | 411038 | L3 | Rejected-AOC Third lowest bidder |
Tender Value
Refer Docs
EMD Value
₹90,000
Closing Date
6 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GERD PASHAN PUNE
GERD PASHAN PUNE
WELCOME MAINTENANCE OF VARIOUS MARRIED ACCN UNDER AGE BR PASHAN
2024_MES_641677_1
GERD/PSN/TOKEN/64 OF 2023-2024
Open Tender
Civil Works
Item Rate
334 days
GERD PASHAN PUNE
As per tender documents
9 documents required · 9 mandatory
₹500
GERD PASHAN PUNE
₹90,000
Yes
30 Mar 2024
9 Feb 2024
8 Mar 2024
9 Feb 2024
6 Mar 2024
23 Feb 2024
9 Feb 2024 - 16 Feb 2024
Amount
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, Complete all as specified and as directed by Engineer-in-Charge.
Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and jointed in cement mortar or bedding, Complete all as specified and as directed by Engineer-in-Charge.
Demolition of Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level), Complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 25mm thick Cement concrete 1:2:4 type B-1,( using 20mm graded crushed stone aggregate) as in sub base of flooring, Complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 75 mm thick Cement concrete type C1, 1:3:6 (using 20 mm graded stone aggregate) in plinth protections/ hard standing path etc finishing the surface without using extra cement even and smooth, Complete all as specified and as directed by Engineer-in-Charge.
Material and labour for coloured Non Skid ceramic tiles 7 mm to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in cement mortar 1 : 6, Complete all as specified and as directed by Engineer-in-Charge.
Material and labour for coloured Non Skid ceramic tiles 7 to 8mm thick polished (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in cement mortar 1 : 6, Complete all as specified and as directed by Engineer-in-Charge.
Material and labour for double charge Vitrified ceramic tiles 9 to 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, as in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in cement mortar 1 : 6, Complete all as specified and as directed by Engineer-in-Charge.
Material and labour for double charge Vitrified ceramic tiles 9 to 10mm thick (square/rectangular), as in skirtings, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including rendering 10 mm thick in cement mortar 1 :4 as backing coat, Complete all as specified and as directed by Engineer-in-Charge. Note : Size of tiles as directed by Engineer-in-charge.
Material and labour for Light coloured Glazed ceramic tiles in vertical surface as in skirting or dado 300 mm x 450 mm x 7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including rendering 10 mm thick in cement mortar 1 :4 as backing coat, Complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 20mm thick granite (of any type) work (Table rubbed and polished) in steps, jambs, pillars, windows cills, cooking platform and like laid over and including 15mm thick screed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, Complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Drilling holes on granite, cudappa or trap stone for bolts. Pipes, etc. n.exc 25 mm dia, Complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Machine cut cudappa stone slab flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, laid over and including 15mm thick screed in CM 1:6 complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 20mm thick Granite (of any type) tiles machine cut in skirting/dado including rendering 10 mm thick in cement mortar 1 :4 as backing coat jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing, Complete all as specified and as directed by Engineer-in-Charge.
Supply and Fix rubber moulded glazed (of any colour and pattern) chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engr in Charge.
Material and labour for preparation of old ceiling surfaces and Distempering two coats with distemper oil emulsion, white or tinted all as specified and directed by Engineer-in-Charge.
Material and labour for preparation of old painted wooden surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.
Material and labour for preparation of old painted steel surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.
Material and labour for complete removal of existing treatment and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying two coats of distemper oil emulsion over a coat of alkali resistance primer on wall complete all as specified and directed.
Material and labour for complete removal of existing treatment and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as specified and directed.
Supply and fix in repairs75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs PVC connections 15mm size with PTMT nuts of length 600mm, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs Vitreous China wash basin, white, flat back, size 550mmx400mm excluding taps, waste chain and plug and porcelain stopper fixing on existing brackets, including supply and fixing of flexible waste outlet pipe of 32 mm dia of required length, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 32mm bore waste coupling of PTMT (half or full threaded) Minimum weight, 45gms, suitable for vitreous china wash basin, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs Fancy type 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed (Min wt 675 grams), Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs 10Litres capacity low level PVC flushing cistern valveless, syphonic action type, , white, with inlet, ball valve, float and handle including brackets, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs Vitreous china wash down water closet pan (pedestal pattern), white including fixing bolts (excluding flushing cistern and flush pipe) including pan seat cover, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs Vitreous China squatting pan, `Orissa' pattern, size 580 mm x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including provision of cement concrete bedding, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repair 15mm bore Fancy type chromium plated Bib taps, fancy type, screwed down, screwed for iron pipe or for brass ferrule (minimum weight 550 grams), Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs 15mm bore chromium plated Angle cock, cast copper alloy screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions (minimum weight 400 grams), Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, including PTMT waste coupling (half or full treaded) (Min wt 40mm bore - 60 grams) and PVC waste pipe 32 mm dia, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repaires sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, including PTMT waste coupling (half or full treaded) (Min wt 40mm bore - 60 grams) and PVC waste pipe 32 mm dia, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs CP soap dish, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs 2 in 1 mixture valve of brass chromium plated, 15mm bore, screwed down, screwed for iron pipe or for brass ferule and fixed, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with and including chromium plated bracket guard and railing 60cm long, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs swivel shower chromium plated with shower arm 15 mm size, 195 mm long with bend of 45º with flange fixed to 15 mm dia GI tubing, shower roses with or without swivel joints,125mm size, including fixing to steel pipe or union, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs toilet paper holder with flat recessed type stainless steel Complete all as specified and directed fixed to walls with and including chromium plated brass screws, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs two way bib cock of brass chromium plated, 15mm bore, screwed down, screwed for iron pipe or for brass ferule and fixed Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and as directed by Engineer-in-Charge.
Dismantaling water tanks exceeding 250 liters and upto 500 litres, Complete all as specified and as directed by Engineer-in-Charge.
Dismantaling water tanks exceeding 500 but not exceeding 1000 litres, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 500 Litres ISI embosed Rotational moulded polyethylene water storage tanks, three layered, cylindrical vertical with closed top hoisted and fixed in position all as specified in SSR Part I, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 1000 Litres ISI embosed Rotational moulded polyethylene water storage tanks, three layered, cylindrical vertical with closed top hoisted and fixed in position all as specified in SSR Part I, Complete all as specified and as directed by Engineer-in-Charge.
Taking out old chocked 20 mm bore GI pipe and connections, including cleaning for refixing or removal to store from trenches, walls, ceilings, floors etc Complete all as specified and as directed.
All as per item No.47 above but 15 mm bore
Supply and fix 20 mm bore GI tubing medium grade with and including necessary fittings complete fixed to walls and ceilings or laid in floors, complete all as specified and as directed by Engineer-in-Charge.
All as per item No.49 above but 15 mm bore
Supply and fix in repairs PVC body box type cabinet mirror of size 400mm x 550mm, Complete all as specified and as directed by Engineer-in-Charge.
Supply and Fix in repairs 40 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm² fixed complete to walls, ceilings or in floors etc, including necessary pipe fittings, complete all as specified and as directed by Engineer-in-Charge.
Demolition and breaking up drain PVC (SWR) pipes jointed in cement mortar/solvent, internal dia of pipe upto 110mm in any position with wall or in floor etc, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 110 mm bore PVC (SWR) bends of any radius, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 75 mm bore PVC (SWR) bends of any radius, Complete all as specified and as directed by Engineer-in-Charge.
Taking down chowkats or frames (without taking of shutters from the frames) not exceeding 1.5 Sqm each, Complete all as specified and as directed by Engineer-in-Charge.
Taking down shutter of size exceeding 1 Sqm but not exceeding 2 Sqm each, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix factory made Soild PVC Door frame of size 50 mm x 47 mm made out of 5 mm palin colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix Factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix IInd class hard wood 35mm thick factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and as directed by Engineer-in-Charge.
Supply and fix factory made 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix extruded aluminium alloy handles, fabricated type anodised 125 mm size, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 125 mm long aluminium anodised barrel tower bolts of extruded section, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 100 mm long MS butt hinges medium weight cold rolled welded to steel frame / fixed to wooden and PVC frame with suitable screws, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix Mild steel flat iron as in hold fasts or similar small articles conforming to Fe-290 Gde E-165, Complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of new wooden surfaces of width or girth exc 10 cm and applying two coats of synthetic enamel paint over a coat of pink primer, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 300mm long aluminum alloy anodised sliding door bolt with hasp and stapple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix Aluminium powder coated sliding windows three track consists of 03 Nos of shutters i.e 02 Nos of Glazed shutters and 01 No of gauzed shutter with size of sections of styles and rails complete all as specified and directed by Engineer-in-Chharge Note : (i) All aluminium section including galzing clips, snap beading, joining cleats, rubber packing screws etc as required are deemed to be including in the rate quoted. (ii) Thickness of powder coating minimum 50 micron. (iii) Glass & wire cloth shall be measured and paid separetely under respective items.
Supply and fix in repairs Aluminium powder coated ventilators partly fixed and partly louvered of aluminium section designed DG-2762 (40 mm x 32 mm x1.5 mm thick) (wt 0.668 kg/metre) frame and DG-2763 and middle section of designed DG-2763 (40 mm x 32 mm x 1.5 mm thick) (wt 0.654 kg/metre), middle section DG-2546 (17.27 mm x 17.15 mm x 1.22 mm thick) (wt 0.124 kg/metre) including 5 mm thick pin headed figured glass louvers with and including blades of 100 mm heavy duty including with aluminium lever handle fixed panel shall be provided with 5 mm thick pin headed figured glass including all necessary rubber packing, anodized aluminium snap beading fixed with and including minimum 6 Nos of suitable size galvanised screws with PVC plug etc, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sq.m in each pane, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, Complete all as specified and as directed by Engineer-in-Charge.
Dismantling boarding of any description, fixed in any position, Complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work / steel frame, Complete all as specified and as directed by Engineer-in-Charge.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones and Supply and fix 4mm thick Sheet glass, ordinary quality, in squares not exceeding 0.5 Sqm each pane, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs 20mm bore stainless steel Gde 304 curtain rods, complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs stainless steel fancy type brackets suitable for 25mm dia curtain rods, complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs 200mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs 300mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled of drawn brass bolts and fixed, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs 125mm long Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-12, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs 150mm long Extruded brass handles, fabricated type polished, Complete all as specified and as directed by Engineer-in-Charge.
Supply and Fix in repairs brass body door stopper of 150 mm long overall length and tongue with hard drawn steel spring, Complete all as specified and as directed by Engineer-in-Charge.
Demolition of brick work/ stone masonry/ PCC block masonry built in cement mortar or cement lime mortar including all quoins, pillars, arches etc, but excluding ashlar facings dressed stone work and precast concrete articles, Complete all as specified and as directed by Engineer-in-Charge.
Material and labour for PCC block masonry with solid blocks, exc 10 cm in width and setting in CM 1:6 precast cement concrete block of type C-1 with 1:3:6 (using 20 mm graded stone aggregate), Complete all as specified and as directed by Engineer-in-Charge.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, Complete all as specified and as directed by Engineer-in-Charge.
Material and Labour for Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 using WPC, Complete all as specified and as directed by Engineer-in-Charge. (wpc will be measured and paid seprately)
Material and Labour for Rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, Complete all as specified and as directed by Engineer-in-Charge.
Material and Labour for Rendering 20mm thick on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing in cement mortar 1:4 using WPC, Complete all as specified and as directed by Engineer-in-Charge. (wpc will be measured and paid seprately)
Material and Labour for Rendering on ceiling, 5mm thick on fair faces of concrete surfaces in cement mortar 1:3, Complete all as specified and as directed by Engineer-in-Charge.
Material and Labour for preparation of newly plastered ceiling surface and applying three coats of white wash, Complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of newly plastered wall surface and applying two coats oil bound distemper over a coat of 1mm thick wall care putty and a coat of primer, Complete all as specified and as directed by Engineer-in-Charge.
Material and Labour for preparation of newly plastered wall surface and applying two coats of acrylic weather proof paint over and including a coat of acrylic primer, Complete all as specified and as directed by Engineer-in-Charge.
Material and labour for disconnecting existing PVC water tanks, setting aside (or lowering if required) for repairs, cleaning and removing all scale and dirt etc from tanks and from mouthts of circulating pipes etc and hoisting if required reconnecting and refixing in position capacity exceeding 250 ltrs and n exc 500 ltrs, Complete all as specified and as directed by Engineer-in-Charge.
All as per Item No 94 here in before but of 1000 litres capacity.
Taking down carefully Copper/aluminium point wiring (light, Fan, Exhaust Fan, Bell, socket or power point) complete including fixture & fitting such as switches, sockets, power socket, bell, bell push, light fittings, regulator, bracket holder, boards and making good disturbed surfaces of wall and ceiling etc. complete all as specified and as directed.
Taking down carefully unserviceable sub main wiring including conduit/casing patti etc. complete all as specified and as directed.
Taking down unserviceable DBs any type / size carefully disconnecting and making good disturbed surfaces complete all as directed.
Taking down unserviceable MCCB/ MCB SP/SPN/Isolator of any rating & size complete all as specified and as directed.
Material and Labour for point wiring with 1.5 Sqmm size, PVC insulated and unsheathed 1100 volts grade single core multistrand copper conductor FRLS cable drawn into existing conduit concealed into wall or on surface with all fittings and accessories with PVC box fixed with CP screws and cup washers for mounting fitting like switches, sockets and fan regulators etc; including one continous run of PVC insulated green colour 1.5sq mm multi stranded copper conductor cable earth wire and connected to common earth dolly complete and making good disturbed surface of walls, floors, etc.all as specified and directed for the followings :- (a) one light point controlled by one; one way switch.
(b) One Fan/Exhaust point controlled by one ; one way switch
(c) One 3 pin 5 Amp socket out let controlled by one switch indep board.
(d) --do-- but on same board.
(e) One bell/buzzer point controlled by one push button.
(f) One light point controled by two way switch
All as per item 100 above but with 2.5 sq mm size pvc insulated and unsheathed 1100 volts grade FRLS single core stranded ( multistoried ) copper conductor cable for 3 pin socket outlet 15 amp on independent board including one continues run of PVC insulated green in colour 2.5 sq mm multistranded copper conductor earth wire connecting to earth dolly complete all as specified and as directed.
Material and Labour for point wiring with 1.5 Sqmm size, PVC insulated and unsheathed 1100 volts grade single core multistrand copper conductor FRLS cable drawn into & including surface PVC casing caping of suitable size with all fittings and accessories with PVC box fixed with CP screws and cup washers for mounting fitting like switches, sockets and fan regulators etc; at any height including one continous run of PVC insulated green colour 1.5sq mm multi stranded copper conductor cable earth wire and connected to common earth dolly complete and making good disturbed surface of walls, floors, etc. complete all as specified and directed for the followings :- (a) one light point controlled by one; one way switch.
(b) One Fan/Exhaust point controlled by one ; one way switch
(c) One 3 pin 5 Amp socket out let controlled by one switch indep board.
(d) --do-- but on same board.
(e) One bell/buzzer point controlled by one push button.
(f) One light point controled by two way switch
All as per item 107 above but with 2.5 sq mm size pvc insulated and unsheathed 1100 volts grade FRLS single core stranded ( multistoried ) copper conductor cable for 3 pin socket outlet 15 amp on independent board including one continues run of PVC insulated green in colour 2.5 sq mm multistranded copper conductor earth wire connecting to earth dolly complete all as specified and as directed.
Supply and fixing switch piano flush button type , singlepole one way 5 Amps complete all as directed.
Supply and fixing switch piano flush button type , single pole two way 5 Amps complete all as directed.
Supply and fixing Bell push flush type SP 5 Amps complete all as specified and as directed.
Supply and fixing switch socket combination out let 5 pin 6 Amps flush type complete all as specified and as directed.
Supply and fixing switch socket out let 2 in 1, 3 pin 5 and 16 Amps flush type Universal complete all as specified and as directed.
Supply and fixing socket out let 2 in 1, 5 amp
Supply and fix ceiling rose ,3 phase ,PVC polycarbonate ,insulated body complete all as specified and as directed.
Supply and fix stepped type elctronic fan regulator 240 V 50 HZ , 100Watts flush type suitable for 1200/1400mm sweep ceiling fan complete including connection all as specified and directed.
Supply and fix call bell (Ding Dong) 240 V, 50 Hz complete all as specified and as directed.
Material and labour for lamp holder pendant/angle type insulated body with back plate all as directed and specified by Engineer-in-Charge.
Material and labour for sub main wiring using two single core 6 sqmm copper conductor,FRLS cable in existing surface/ recessed/ PVC/Steel conduit, including one run of PVC insulated copper earth continuity wire of 6.0 sqmm and connected to earth dolly complete all as specified and as directed. Note: 2 run of 6 sqmm ( 01 for phase and 01 for neutral) with 1 separate run of 6 earth wire will be measured as one unit.
Material and labour for sub main wiring using two single core 4 sqmm copper conductor,FRLS cable in existing surface/ recessed/ PVC/Steel conduit, including one run of PVC insulated copper earth continuity wire of 4.0 sqmm and connected to earth dolly complete all as specified and as directed. Note: 2 run of 4 sqmm ( 01 for phase and 01 for neutral) with 1 separate run of 4 earth wire will be measured as one unit.
Material and labour for sub main wiring using two single core 2.5 sqmm copper conductor,FRLS cable in existing surface/ recessed/ PVC/Steel conduit, including one run of PVC insulated copper earth continuity wire of 2.5 sqmm and connected to earth dolly complete all as specified and as directed. Note: 2 run of 2.5 sqmm ( 01 for phase and 01 for neutral) with 1 separate run of 2.5 sqmm earth wire will be measured as one unit.
Material and labour for sub main wiring using two single core 6 sqmm copper conductor,FRLS cable drawn in and including PVC casing caping of suitable size,including one run of PVC insulated copper earth continuity wire of 6.0 sqmm and connected to earth dolly complete all as specified and as directed. Note: 2 run of 6 sqmm ( 01 for phase and 01 for neutral) with 1 separate run of 6 earth wire and one run of PVC casing capping will be measured as one unit.
Material and labour for sub main wiring using two single core 4 sqmm copper conductor,FRLS cable drawn in and including PVC casing caping of suitable size,including one run of PVC insulated copper earth continuity wire of 4.0 sqmm and connected to earth dolly complete all as specified and as directed. Note: 2 run of 6 sqmm ( 01 for phase and 01 for neutral) with 1 separate run of 6 earth wire and one run of PVC caing capping will be measured as one unit.
Material and labour for Sub main wiring complete with 2 runs of 2.5 Sqmm single core PVC insulated unsheathed cable 1100 V grade with multistranded copper conductor ISI marked drawn in and including PVC casing and caping of suitable size with including provision of 1 run of 2.5 Sqmm PVC insulated unsheathed cable with multistranded copper conductor as earth continuity complete all as specified and directed. Note: 2 run of 2.5 sqmm ( 01 for phase and 01 for neutral) with 1 separate run of 2.5 earth wire and one run of PVC casing capping will be measured as one unit.
Supply and fixing surface and wall mounted LED batten with polycarbonate housing and interated electronic driver 1x 20W, 220V, AC connecting up with three core flexible copper conductor cable of suitable size from ceiling rose at any height complete all as specified and as directed. Make : Havells cat pt No: LUMILINENEOBS20WLED865PCWH /Philips/Crompton
Supply and fixing surface and wall mounted LED batten with polycarbonate housing and interated electronic driver 1x 10W, 220V, AC connecting up with three core flexible copper conductor cable of suitable size from ceiling rose at any height complete all as specified and as directed. Make : Havells cat pt No: LUMILINEBS10WLED865PCWH /Philips/Crompton
Supply and fixing Decorative wall light fixturemade up of polycarbonate, incuding 9w led lamp B22 base complete all as specified and as directed Make : Havells LHDL06160099/Philips/Crompton
Supply and fixing LED bulk head fitting environmental friendly, ultra modern, energy saving surface mounted fitting of 10 W, complete with all accessories incl twin core twisted flexible copper cable of suitable size complete all as specified and as directed Make : Havells HEXAFT10WLED857SSYMBOPC/Philips/Crompton
Supply & fixing of LED street light 25 watt made up of pressure die cast aluminum housing with high power LED as lighting source and lens embedded PC cover having top opening separate driver compartment with IP 66 protection and impact resistance of IK 07 including suitable GI Pipe in 45 degree bend shape and necessary clamping devices required at site complete all as specified and directed by Engr-in-Charge. Make-Havells Cat No ENDURASUNDOWNSL25WLED765PASYBOTGIHD Or eqvt make of PHILIPS/CROMPTON
Supply & fix double door sheet metal enclosure MCB distribution board. Single pole & neutral (SPN) 240 volts 8 way with IP-43 IK-09 protection with metal door complete with appropriate size bus bar and neutral link,all as specified in directed by Engineer in charge.
Supply and fix MCB SPN 20-40 Amps 10 KA, 240 V connected through copper thimbles of suitable size complete all as directed and specified.
Supply and fix MCB SP 3-32 Amps 10 KA, 240 V connected through copper thimbles of suitable size complete all as directed and specified.
Taking down carefully after disconnecting electrical/water supply connections and transporting to the work shop for carry out the servicing / over hauling of the storage type electric water heaters (Geysers) of storage capacity 25 / 50 litres of any make / type by cleaing the inner surface of the tank / heating element with chemical to remove the scaling / rust & reassembling the same after replacing burnt out parts and refixing on its original position including testing complete all as directed. Note : Burnt out parts to be replaced with new one shall be measured and paid separately as " Supply only".
Supply only heating element of the following ratings as required at site including rubber washer/packing. ISI marked. As per exising make (a) 1/1.5 KW
Supply only thermostat stem type suitable for geysers 25 / 50 litres. ISI marked.
Supply only PVC connecting pipe with two SS adaptors 18" long & fixing in position for cold inlet connection.
Supply only stainless steel pipe connecting with two SS adaptors 18" long & fixing in position for hot water outlet connection.
Supply only in replacement Gun metal Non-Return valve 15mm dia complete all as specified.
Supply only indicator lamp any type suitable for 25 / 50 litres geysers.
Supply only GM pressure release valve 15mm dia complete all as specified.
Taking down the defective ceiling fan of any sweep and make after disconnecting electrically & mechanically and transporting to the work shop rewinding as per suitable copper gauge , & carry out the repairs as required and brought back to site, re-fixing, testing in all respect for smooth running and comprising of the following:- (a) Servicing/overhauling the ceiling fan by thoroughly replace the bearing, shaft, stator, rotor & applying the lubricant / grease to the bearing including applying one coat of super enameled varnish over the winding to improve the insulation complete.
Taking down the repairable exhaust fan of upto 300 MM sweep, any make, single phase, 230 volts, 50 hz, AC after disconnecting electrically and mechanically and transporting to the work shop rewinding as per suitable copper gauge & carry out the repairs as required and brought back to site, re-fixing, testing in all respect for smooth running and comprising of the following:- (a) Servicing/overhauling the exhuast fan by thoroughly replace the bush/ bearing, shaft, stator, rotor & applying the lubricant / grease to the bearing including applying one coat of super enameled varnish over the winding to improve the resistance value.
Supply and fixing Modular switch , singlepole one way 6 Amps, 1 module complete all as directed.
Supply and fixing Modular switch , singlepole two way 6 Amps, 1 module complete all as directed.
Supply and fixing Modular Bell push 6A 1 module
Supply and fixing Socket, 6A - 2/3 pin combined 2 module,.
Supply and fixing Socket 6A/16A - 2/3 pin combined 2 module,
Supply and fixing of Modular switch 1 way 16A, 1 module
Supply and fixing of Fan step regulator, 120W - 2 module
Sunil Constructions
AJAY ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .