SPECIAL REPAIR TO OR MD ACCN BLDG NO. SP-9, SP-10 AND SP-11 (TOTAL DUS-18 NOS) AT SP LINES OF 509 ABW UNDER GE (EAST) AGRA

Amount

Demolition of brick work or stone/boulder masonary built in cement mortar including all quoins, arches, pillars etc complete.

Brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed.

Ditto all as item No 02 above but except bricks complete all as specified and directed.

Taking down cement or cement lime plaster of any discription on bricks or stone walls/ceiling etc including racking out joints, hacking for kay, scrubbing down with water complete all as specified and directed.

M&L for 10 to 12 mm thick ready mix repair plaster with high quality polymer additives and well graded sand and fillers which can be used for plastering (as per manufacturer instructions) over interior surface of wall etc complete all as specified & directed. (Note : Coverage for smart care ready mix plaster'll be 24 - 28 kg / sqm)

M&L for 10 to 12 mm thick ready mix repair plaster with high quality polymer additives and well graded sand and fillers which can be used for plastering (as per manufacturer instructions) over exterior surface of wall etc complete all as specified & directed. (Note : Coverage for smart care ready mix plaster'll be 24 - 28 kg / sqm)

M & L for applying 25 mm thick ( average ) repair mortar ready to use single component polymer modified repair mortar for repair of RCC members likes beams, columns, chajja and facia/Ceiling, mortar having good compressive strength and shrinkage resistance etc complete all as specified & directed.

M & L for applying bonding agent for bonding old to new concrete surface likes chajja/ beams/ celings/ columns/ facia etc by high performance modified Styrene- Butadiene Rubber ( SBR ) base binder . Applying of binder is as 10 sqm/ per lit etc complete all as specified & directed.

M&L GI Wire netting 0.90 mm dia and 12 mm mesh lathing to wood or metal studding, joints, etc. sandwitched between two layers of plastering (Plastering shall be measured and paid separately) in walls, ceiling, stanchions, beams, etc. including all laps, cutting and waste complete all as specified and directed

M&L for preparation of newly plastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

Material & Labour for preparation of new plastered surface and applying one coat of silane siloxane primer @ 0.12 kg / sqm with two coat of premium exterior weather coat paint (silicon additive ) @ 10 sqm / litre in each coat etc complete all as specified and directed. Note : This item shall be operated by authorised applicator and contractor have to submit the guarantee for 5 years @ 3% of the cost of this item in the favour of GE (East) Agra.

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

Material and Labour for preparation of old plastered or unplastered surfaces of wall including cornices, pilaster etc by brooming down by steel wire brushing, scrapping down smoke Soot, moulds, moss and trading oil and greasy spots etc and apply two coat of white wash complete as specified and directed.

Material and Labour for preparation of old plastered or unplastered surfaces of ceiling and apply two coat of white wash complete as specified and directed.

M&L for Preparing old plastered or unplastered surfaces of walls and applying two coats of oil bound distamper over a coat of average 1 mm thick wall care putty incl rubbing complete all as specified and directed.

M&L for Preparing new plastered surfaces of walls and applying two coats of oil bound distamper over a coat of average 1 mm thick wall care putty incl rubbing complete all as specified and directed.

Material & Labour for preparation of old plastered surface including removal of existing treatment and applying one coat of silane siloxane primer @ 0.12 kg / sqm with one coat of premium exterior weather coat paint (silicon additive ) @ 10 sqm / litre etc complete all as specified and directed Note : This item shall be operated by authorised applicator and contractor have to submit the guarantee for 5 years @ 3% of the cost of this item in the favour of GE (East) Agra.

S&F in repair stainless steel plate rack of size 31"x30"x10" mm fixed to wall complete all as specified and as directed.

S&F in repair kitchen sink with draining board made of stainless steel 1mm thick with sink coupling & waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x160 mm & heavy duty waste pipe 800 mm long complete all as specified and directed by the Engineer-in-charge.

Taking up or down 15 mm dia steel tubing and connections etc complete all as specified and directed.

Cutting Chases, pinning in brick/Concreate wall making good to facing where required and pointing in cement mortar 1:3 ends of edges of landing, steps cills sunshade shelves lintles etc and cutting chase for concealed water tubing or or concealed conduit wiring. etc and making good cutting N. exceeding 10 CM girth complete all as specified and directed.

S&F 15 mm bore Galvanized Steel tubes, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by the Engineer-in-charge.

Taking up or down 20 mm dia steel tubing and connections etc complete all as specified and directed.

S&F 20 mm bore GI tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Taking up or down 25 mm bore steel tubing and connection complete all as specified and directed.

Supply and fixing 25 mm bore galvanised tubes medium grade , with all fitting and fixed complete to walls and ceilings,roofs or laid in floors.

S & F in repair PVC (SWR) floor trap including jointing with solvent cement (Diameter of outlet 75mm), jointing to waste pipe and fixed in cement concrete 1:2: 4 (type B1) mixed with water proofing liquid @ 200ml in 50 kg cement, inlcuding taking out of old unserviceable connections etc, connecting up new and making good disturbed portion complete all as specified and directed by the Engineer-in-charge

Supply & fixing in repairs C.P. grating 100/125 mm dia (with or without hole for waste pipe ) as reqd at site complete all as directed. all as specified & directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall / floor complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified & directed.

S&F 110 mm PVC (SWR) junction single (T single) equal or unequal with acess door. complete all as specified and directed .

S& F 110 mm PVC (SWR) vent cowl complete all as specified and directed. complete all as specified and directed .

S&F PVC (SWR) pipes 75 mm dia single socketed in any length with rubber ring joints laid in trenches or in floors, wall including fittings dismantling etc confirming to IS 13592 complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius complete all as specified and directed by the Engineer-in-charge.

S&F 75 mm PVC (SWR) junction single (T single) equal or unequal.with access door.complete all as specified and directed .

Taking down of All loose and de-bonded concrete/ screed, loose particles, dirt etc & Debris should be removed from Bldg. Roof substrate must be pressure-washed with water with, a minimum working pressure of 1400 psi is to be used to and/or remove all dirt, dust, chalking and waste products. Remove algae, mold by using bleach solution or biowash etc complete all as specified & directed by Engr-in-Charge.

M&L for repair of All visible hairline cracks on concrete roof / screed more than 0.50 mm and not giving hollow sound, should be cut and widen in V shape with mechanical cutter in the size (10mm W x 6mm D). Fill cracks with PU sealant / Hybrid Sealant with suitable gun and smoothed with a putty knife or trowel. Allow sealant to cure a minimum (72 Hrs.) 3 days etc complete all as specified & director.

M&L for Clean the concrete screed with high pressure water jet to remove dirt and loose particles. Brush apply a bond coat of Pidicrete URP or equivalent make of make M/S Thermax LTd, M/S Asian Paints LTd, M/S STP Ltd & M/S Fosroc Chemical mix in the ratio of 1:1 (URP 1: Cement 1) by volume to make it lump free slurry when applied on in the pre wet surface. Laid to fall roof screed in correct slope and gradient. Mix Pidicrete URP 10 % by weight of cement in concrete in ratio of 1(cement) :1.5 (sand) :3(12.5 mm aggregate) & avg thickness of concrete should be 25 mm.Level the repair concrete and finish with trowel. Moist cure should be done for 7days. Air cure screed for 7days, before application of roof top coat coating system etc complete all as specified & directed.

M&L for Apply one coat of Cipoxy 16D primer in the ratio 1:1 spreading at the rate of 0.200 kg-0.250 kg /sqm in complete dry condition where moisture contain below 7% (should be checked with moisture meter)Allow the primer coat to dry for 6 to 8 hours. Apply 1st coat of Roofseal waterproofing chemical of approved makes without dilution spreading at the rate of 0.70/litre/Sq.mt/Coat until all surface is covered. Lay a 45 GSM Fibre glass mesh as a reinforcing material which is incorporated in the coating when the first coat is still in wet condition. Allow the first coat to dry for approximately 4 to 6 hours. Apply the second of chemical with the same application coverage, but in a direction perpendicular to that of the first and second coats. Allow each coat to air cure for a minimum of 4-6 hours after application. Check to see no void surface is left untreated / uncoated.Allow the system to air cure for 7 days minimum etc complete all as specified & directed.

S & F in repairs Brass chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F in repair bib taps, cast copper alloy, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm dia GI pipe etc making good disturbed portion complete all as specified and directed.

S&F in repairs Vitreous China wash hand basin white padestal pattern including cutting for and pinning in ends of brackets or erecting stand , 32 mm dia Waste coupling of PTMT (half or full threaded, Minimum weight 32mm-45gms/40mm-60 gm), heavy duty waste pipe 800 mm long & all necessary arrangement for fixing it etc complete all as specified and directed by the Engineer-in-charge.

Supply and fix in repairs CP Central hole basin mixture screwed for 15 mm dia GI pipes including PVC connection etc complete etc complete all as specified and directed

S & F in repairs Brass CP mixer for mixing hot & cold water srewed down fixed for 20 mm outer dia CPVC pipes complete all as specified and directed.

Supply and fixed in repair angular valve for 15 mm dia GI pipes, cast copper alloy,CP fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe all as specified and directed.

S & F in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed by the Engineer-in-charge.

S&F in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and PVC connections 15mm size with PTMT nuts of length 450mm inlcuding taking out of old unserviceable connections etc, connecting up new and making good disturbe portion complete all as specified and directed by the Engineer-in-charge

S&F 500 litres capacity Rotational moulded polyethylene water storage tanks ISI marked engraved (Cylindrical vertical with closed Threaded top) hoisted and fixed in position including 20 mm dia PVC float valve complete all as specified in SSR Part I including dismantling of existing tank and removing to store/ issued under schedule of credit as directed by the Engr in charge.

Supply and fix 20 mm outer dia gun metal gate valve with iron wheel head both ends screwed.

Supply & fixing in repair brass C P tubular towel rail, 60 cm long, 20 mm bore, chromium plated complete all as specified & directed

S&F in repairs CP Soap dish complete all as specified and directed by the Engineer-in-charge.

S&F in repairs Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S & F in repair Vitreous china wash down water closed pan (Pedestal Pattern ) with 'P' and 'S' trapp including connection to trap and cistren and flush pipe (excl flushing cistren)and making good to disturbed surface of floor all fixed as in repairs all as specified and directed.

S & F in repair plastic WC seat cover and mild steel chromium plated or aluminised hinging device as in repairs etc complete all as specified and directed

S & F in repairs Flushing jet spray for pedestal pattern WC incl .flexible pipe and brass chromium plated nuts and bolts fixed completed all as specified and directed.

S & F in repairs Flushing Health Faucet ABS body including water pipe of size 1 to 1.5 mtr long between dia & fixed completed all as specified and directed.

Supply and fixed in repair two way angular valve , 15mm dia, cast copper alloy,CP fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe all as specified and directed.

Taking down chowkats or frame with shutter (without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and directed.

All as per item No 60 before but exc 1.5 Sqm and not exc 4.00 Sqm each complete all as specified and directed.

S&F for Mild steel framed work as in chowkhat / frame of doors or gates of angle or other section with gusset plates, rails, braces,hold fast,grill etc., complete all as specified and directed., drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete, quality conforming grade Fe- 290 or E- 165 complete all as specified and directed.

S&F for 1.6 mm thick mild steel black sheet as in steel gate and similar works cut to size, holes punched including round headed screw welded etc complete as specified and as directed.

S&F Factory made single extruded WPC (wood polymer composite) solid door/window/ cesetory windows & other frames / chowkhat of decorative type/wood grain printed colour of size 50x100 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade) calciam Calcium carborate and naturan fibers (wood powder/ rice husk/ wheat husk ) and non toxic additives (maximum toxity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwd with full body threated star headed SS screw having minimum frame dencity of 750 kg/ cum. Srew withdrowl strenghth of 2200 N (Face) & 1100 N (Edge). minimum comp ressive strenth of 58 N/mm2,modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water /moister proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasterners of required dia and lenth complete as per direction of engineer-in-Charge.

Ditto- all as per item No. 64, above, bull size 65 x 125 mm complete all as specific and directed.

M&L for Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter both side laminated of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

M&L for Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type wiremesh door shutter both side prelaminated of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

M&L for providing, PCC 1:3:6 type C-1 (using 20 mm graded aggregate) for embedding hold fasts/coping /padding including necessary form work etc.complete all as specified and directed.

S&F Mild steel 300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F 150 mm long alluminium handles, cast type, anodized and fixed complete all as specified and directed.

S&F 200 mm long Aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F 100 mm long SS Butt hinges complete all as specified and directed.

S & F 150 mm floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F of factory made soild PVC door frame of size 50 mmx47 mm made out of 5 mm thick single side prelam PVC sheet reinforced with mild steel square tube , supplying & fixing in opening as per specification and drawing complete all as specified & directed.

S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front face & 2 mm plain colour PVC sheet on back face with particle board core, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

Supply and fix in for 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed.

Providing & fixing of windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy-duty stain less steel pivot hinges shall be provided per shutter. The windows should be panelled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self-expanding, screws. Including 10mm square guard bars with 6” (152.4mm) pitch, complete for finished item of work including of all taxes etc as specified and directed.

Providing and Fixing of ventilator made of pre-painted steel (Base steel as per IS 513 of 0.58 mm thick “D” Quality galvanized as per IS 277 with Zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 48x50mm, centre mullion should be of 48x50mm, section for shutter should be of 52x 25mm and rebate for Glazed shutter with a 20mm provision for Guard bars/Grills. The sections are to be cut to length metre joined with corner bracket. Centre mullion is to be fixed with mullion cap. Handle, stay, 2 nos. of Stainless Steel heavy duty Pivot hinges shall be provided per shutter the windows fitted with 4mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including fixed panel beading section should be of 12x12mm. Outer frame and mullions to have 10mm Square guard bars with 6” (152.4mm) pitch etc., complete for finished item of work.

S & F stainless steel wire mess 0.71 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or ss wire staples complete all as specified and directed

M & L for preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S&F in repair drapery (curtain) rod 25 mm dia Stainless steel grade 304 , side cups including fixing arrangement with drilling holes in walls brackets etc complete approved quality and colour complete all as specified and directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S & F in repair Factory Made 18 mm thick 100% Solid WPC ( Wood polymer Composite ) decorative Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm manufactured by Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850 N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and required frame as per site requirement.Material test certificate and authentication should be compulsory provided by the manufacturing company : th 6" (152.4 mm) pitch etc complete for finished item of work, complete all as specified and directed.

S&F SS soft close cabinet hinges set of two any angle as per site requirement for kitchen cabinets/cupboards complete all as specified and directed.

S&F SS cupboard drawer channel set for kitchen cabinate (size 14 to 18 inch requirement) complete all as specified and directed

S&F SS wardrobe hanger rod ovel shape including brackets (n. exc. 1.5 m length) including all fittings complete all as specified and directed

S&F SS tie hanger set for wardrobe including All fittings complete all as specified and directed.

S&F Continuous (piano) Stainless steel hinges width of flaps (when open) in 40mm, complete all as specified and directed.

S & F stainless steel 40 mm dia(brass polished) decorative knob for kitchen cup board complete all as specified and directed.

S & F Brass magnet catcher suitable for CB/cabinet shutter complete all as specified and directed.

M&L Baroda green marble 18 to 20 mm thick in steps, pillars, window cills, pillars, window cills, cooking platforms and like laid over and including 15 mm thick screed bed in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L PCC 1:2:4 type B-1 using 20 mm stone aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

Cutting holes in brick wall built in cement mortor or cement lime mortor and stone wall built in lime mortor or wall of cement concrete of superficial area n. exc 150 sqcm and making good in cement mortor 1:3 or cement concrete 1:2:4 type B1etc complete all as specified and directed.

Dismantling stone slabs of any description or thickness in floors / dados, etc laid bedded and pointed in any mortar complete all as specified and directed by the Engineer-in-charge

Dismantling floor, hearth wall tiling including cement mortar bedding (but not backing) including rubbish off the premises complete all as specified and directed.

M&L for 7 to 8 mm thick non skid ceramic coloured tiles joint free decorative (square/ rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed with white cement and coloured pigment to match the tiles over 15mm thick screed bed in CM 1:6.complete all as specified and directed.

M&L for 7 to 8 mm thick non skid ceramic coloured tiles joint free (square/ rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm in skirting etc set and jointed in neat cement slurry and pointed with white cement and coloured pigment to match the tiles including 10 mm thick rendering in CM 1:4 on brick wall complete all as specified and as directed.

M&L for 7 to 8 mm thick non skid ceramic coloured tiles joint free (square/ rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed with white cement and coloured pigment to match the tiles over 15 mm thick screed bed in CM 1:6.complete all as specified and directed.

M&L for Coloured Glazed ceramic tiles 450x300x6-7mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and as directed.

M&L for applying two coat of fosroc brushbond aqua protect or equivalent to the surface of wall / floor before rendering to prevent the seepage etc complete all as specified & directed.

Demolition of cement concrete in ground floor and paving n exc 15 cm thickness (below or above the ground level) built in cement mortar complete all as specified and directed by the Engineer-in-charge

M&L 25 mm thick PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in sub base of floor to receive tiles complete all as specified.

M & L for machine cut Kota stone slab flooring 20-25mm thick over 15mm thick screed bed in CM 1:6. laid and jointed with grey cement slurry mixed with match the shade of the slab including rubbing and polishing complete all as specified and directed.

M & L for kota stone slab 20-25 thick in riser of steps, skirting, dado and pillar laid over 10mm thick backing coat in CM 1:4 and jointed with grey cement slurry mixed with match the shade of the slab including rubbing and polishing complete.

M & L for coloured designer chequered tiles 300 X 300 exterior grade 20 mm thick laid over 15 mm thick screed bed in CM 1:6 set & jointed in neat cement slurry with pigments to match the tile, complete all as specified

Dismantling asbestos cement (corrugated, semicorrugated sheet/ North light curve, Ridge etc.) sheets in roof coverings complete all as specified and directed.

S&F of Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of green colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. Make :- Jindal / TATA / JSW

M&L for Cutting grooves in brick wall, 75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided etc complete all as specified and directed.

S&F of Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing / tank staging (Beam, tee, angle, wind tie,channel or flat sections) including distance pieces, welding, cutting , cleats etc Fe 410 -W (GdeE- 250) qualityA complete all as specified and directed.

Demolition of Reinforcement Concrete of any description and in any position etc all as specified & directed.

M&L providing precast cement concrete Type B1 1:2:4 (20mm graded aggregate) (nominal mix) for cover slab for manhole, drain and similar articals with plane faces complete all as specified and directed by engineer-in-charge.

S&F TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified & directed.

M&L for 1.00 mm thick mild steel black sheet as in steel gate and similar works cut to size, holes punched including round headed screw welded etc including Two coats of synthetic enamel paint (Ordinary tint) over a coat of red oxide primer including preparation of new or previously untreated surfaces of steel complete as specified and as directed.

M&L RCC M-25 (20 mm graded stone aggregate) as in roof beams, chajja lintle etc complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, in fair finished etc. all as specified and directed

S&F mild steel bars 5 mm dia and over up to 10 mm dia in stirrups space and binders. (TMT) cut to length bent to shape required including cracking,bending spirally for hooping ends and binding with and including mild steel wire not less than 0.90 mm dia quality of steel etc complete all as specified and directed.

M&L for treatment of voids in masonry using chemical (Imidacloprid 30.5% SC odorless chemical) emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors and etc complete all as specified and directed. (No extra payment shall be claimed on this account)

Taking down copper / aluminum point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, fan regulators, sockets, lamp holder, bell push, call bell, LEB bulb, light fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

M&L point wiring with PVC FRLSH insulated unsheathed multistranded copper conductor of size 1.5 sqmm, 1100 V grade in including concealed conducit, using PVC FRLSH insulated unsheathed copper conducltor of size 1.5 sqmm as earth continuity wire and connected to common earth dolly with copper lugs inserted in MS boards complete heavy duty for housing switches, sockets, regulators, bell push etc complete all as specified and directed for the following Note :- Conduit shall be fixed on surface of roof with necessary saddles where concealing of conduit is not feasible at no extra cost for the following One light /fan/ exhaust fan point controlled by one way 5 Amp switch

All as per item No.124 but for One bell / buzzer point controlled by one way 5 Amp push button switch

All as per item No.124 but for One 3 pin / 5 pin socket out let 5 Amp on independent board

All as per item No.126 but for but on same board

All as per item No.124 but for One light / point controlled by two way switch 5 Amp

M&L point wiring with PVC FRLS insulated unsheathed multistranded copper conductor of size 2.5 sqmm, 1100 V grade in including concealed conduit using PVC FRLSH insulated unsheathed copper conductor of size 2.5 Sqmm as earth continuity wire and connected to common earth dolly with copper lugs inserted in MS boards complete heavy duty for housing switches, sockets, regulators, bell push etc complete all as specified and directed.

Allas per item No.129 above but using 4 sqmm copper conductor wire with 4 sqmm earth wire complete all as specified and directed.

S&F switch piano, flush type 5 Amp single pole one way, AC 240 volt complete all as specified and directed.

S&F switch piano, flush type 5 Amp single pole two way, AC 240 volt complete all as specified and directed.

S&F socket out let, flush type 3/5 pin, 5 Amp, AC 240 volt complete all as specified & directed.

S&F switch piano, flush type 15 Amp AC 240 volt complete all as specified and directed.

S&F socket outlet multi purpose 3 pin, 15 Amp and 3 pin 5 Amp flush type AC 240 volt complete all as specified and directed.

S&F electric bell multi music type, AC 230 volt complete all as specified and directed.

S&F bell push 5 Amp single pole one way AC 240 volt complete all as specified and directed.

S&F ceiling rose surface bakelite ISI marked three terminal complete all as specified and directed.

S&F stepped type electronic fan regulator flush type on the existing fenolic laminated sheet etc as required complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep min air deliver 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) including taking down the old unserviceable one complete all as specified and directed.

Supply and fixing exhaust fan made of sturdy Engineering plastic complete with louver shutter, voltage 230 V, 50 Hz RPM 1200 copper winding of sweep 300 mm including taking down the old unserviceable one complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single phase, 230 V of size 300 mm sweep with blades and frame and louvers complete all as specified and directed including taking down the old unserviceable one

S&F wall mounting BLDC fan with remote control, electric driven single phase, oscillating type 400 mm sweep, plastic ABS body with noise level 55 db, 1500 RPM speed including all necessary parts required for its installation complete all as per specified and directed including taking down the old unserviceable one.

S&F in replacement tube light fitting energy saving decorative LED box type 20 watt (4 feet), 230 volts, 6500 K energy efficient tube light fitting extruded aluminium / CRCA housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete with all accessories prewired and including making connections with 3 core twisted flexible copper cable of size 23/.0076 from ceiling rose / PVC connector to light fittings complete all as specified and directed including taking down the old unserviceable one. Make Havells mode No.LUMILINEPLUSBS20WLED/ CROMPTION MODEL NO. LPLLA-18-CDL or equivalent

S&F LED mirror light fitting 9/10 watt basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver connected accessories prewired and connected with 23/0.0076 three core PVC flexible cable etc complete all as specified and directed including taking down the old

S&F LED bulkhead light fitting 1 x 10W Environment friendly, ultra orden, energy saving, surface mounted, decorative oval Bulk head edge-lit LED luminaire comprising of high brightness LEDs, ENDURA RUGBY NEO N-IP65 and glare free with LED driver 10 W complete fitting etc with all accessories prewired and conneced with 23/0.0076 three core PVC flexible cable etc including taking down of old light fitting complete all as specified and directed including taking down the old unserviceable one.

S&F in replacement of bldg security light fitting energy saving high efficiency LED street light fitting 35 watt 5700 K, IP 66, ahving pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, prismatic polycarbonate cover complete including GI bracket of size 32 mm dia bent to shape having length on less than 1.2 mtr fixing with clamp etc and making connections using cord flexible 3 core copper cable of size 23/0.0076 from ceiling rose / PVC connector to light fittings or as directed including taking down the old unserviceable one.

S&F modular type AC box with plastic enclosure 25A MCB suitable for power equipments as per IS:13032 & IS :8623 complete all as specified and directed.

Supply & fix of sheet metal enclosure vertical TPN DB 4 way double door, suitable for flush mounting and surface mounting, with 1400 A copper busbar for each phase with 2 neutral bar, 2 earth bare and cable ties for cable management fully insulated busbar & shrounded neutral bars, improved pan assembly for eqase of installation, prefitted masking sheet, reversible door for IP 43 DB's with provision for 160 Amp MCCB as incomer and SP/TP MCB's as outgoing including cutting/ chasing of wal and making in good to the disturbed surface complete all as specified and as directed inlcuding taking down the old unserviceable one. make Legrand model No. 507725/L&T/Schneider or equivalent.

Supply & fix sheet metal enclosure MCB distribution board, single pole & neutral 240 volts, 200 A bus bar 8 way with IP-54 protection double door complete with appropriate size bus bar and neutral link including cutting / chasing of wall and make in good to the distrubed surface complete all as specified and directed including taking down the old unserviceable one.

S&F MCB single pole 6 to 40 amp 240V 'C' series 10 KA complete all as specified including taking down the old unserviceable one.

S&F MCB single pole and neutral 40 to 63 amp 240V 'C' series 10 KA complete all as specified including taking down the old unserviceable one.

M&L for sub main wiring with 2 songle core 6 sqmm PVC insulated cable with stranded copper conductor drawn in including PVC concealed conduit with and including independent PVC insulated 6 sqmm single core stranded copper conductor earth wire complete all as specified including taking down the old unserviceable one.

M&L for earthing complete with galvanized earth plate electrode 600 x 600 x6mm thick burried directly in ground vertically to a depth not less than 2.25 M below normal ground level ) with top edge of the plate not less than 1.50 M below normal ground level , connected to and including galvanized steel wire 4mm dia as earth lead soldered and riveted to earth plate by means of nuts, bolts, check nuts & washers, of galvanized iron or steel with connected to test point and testing on completion including 15mm GI light grade pipe for earth lead protection from earth point to earth plate, including provn adequate quantity of charcoal dust mixed with 35 % common salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth plate with 20mm bore medium grade GI Pipe for watering,GI check nut, funnel and wire mesh with and including all necessary excavation & earth work in soft/loose soil, returning filling in, removal of surplus soil to a distance 50 metre,,PCC 1:3:6 type C-1 as in earth pit, 40 mm thick RCC cover using cement concrete 1:2:4 type B-1 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 and as directed. NOTES:- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone at without any extra cost by contractor.

S&F water heater storage type 25 Ltr, 5 star rating with titanium coated MS tank housed in polycarbonate body having thermostate with external knob complete including all accessories and suitable for working on high pressure pumps and fixing on wall with 4 Nos of fastners, plug top 15 amps complete all as specified and directed including taking donw the old unserviceable one.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 50 sqmm 4 core incuding taking down the old unserviceable one.

Excavation in trenches in soft / loose soil n.exc. 1.5 mtr wide and not exc. 1.5 mtr deep and getting out including forming bottom surface for laying of cable complete all as specified and directed.

Returning filling and including spreading, leveling, watering and well ramming in layers not exc. 25 cm thick complete all as specified and directed.

Removing surplus soil to a distance n.exc. 50 mtr and depositing where directed at a level n. exc. 1.5 mtr abvoe the starting point complete all as specified and directed.

M&L for drilling suitable dia horizontal bore holes below / under existing road surfaces / floors at a level not less than 0.60 mtr etc with using mechanical / or manual devices as required at site including making good the disturbed surfaces to match with the existing after laying pipes complete all as specified and directed. Note :- Cost of equipment, tools and plant material (horizontal boring rig machine) required for boriing shall be arranaged by contractor at no extra cost to the govt.

S&F of double wall corrugated pipe 75/63 mm dia with all fitting laid in bore holes / trenches / drain or fixed alongwith pole / wall incuding FI clamps, nut bolts etc complete all as specified and directed.

Supply and fixing MCCB 4 pole, 160 Amps, 50 Hz, Icu=35 KA at 415 volts with thermal magnetic alongwith adjustable magnetic protection for current setting Icu=Ics=100% with adjustable over lead setting (minimum 70% to 100%) value from 10 to 15 times of related capacity standard complete all as specified and directed.

Lachman Das Govind Ram (BID ID -3466802)

C P Singh and Co (BID ID -3471975)

CREATIVE CONSTRUCTION (BID ID -3467184)

M/S DEVENDRA KUMAR GUPTA (BID ID -3466835)

garg construction company (BID ID -3466647)

M/s Shrangi Rishi Construction (BID ID -3471492)

POOJA ENTERPRISES (BID ID -3471789)