SPL REPAIRS TO BLDG NO P 22A RSP, PROVN OF RETAINING WALL FROM BR CIRCLE TO ATA CIRCLE AND ADDN ALTN TO MD ACCN JCOS/OR AT CMM

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above GL) complete all as specified and directed.

Taking down cement plaster of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Dismantling of floor, heath or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises.

M&L virified Ceramic light shade tiles 10mm thick (Square/ rectangular polished area of each tile not exceeding 0.36 sqm in dado/ skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M & L non skid ceramic coloured tiles 7 to 8 mm thick (square rectangular ) area of each tile exc 0.06 sqm but nexc 0.11 sqm,in floors etc set and jointed in neat cement slurry and pointed in white cement to match.

M & L glazed ceramic coloured tiles 300 x 200 x 7 mm thick on vertical surfaces of wall set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specifed.

M & L 15 mm thick screed bed or bedding layers of mortor in cm (1:6) for laying floor finishes all as specified.

M & L 10 mm thick plaster on brick walls in CM (1:4) for laying wall tiles.

M&L plastering in CM (1:6) 15mm thick on brick masonary walls and finished surface even and smooth without using extra cement complete all as specified and directed.

M&L plastering 10mm thick plaster in CM (1:4) with with water proofing compound on brick masnoary walls and finished surface even and smooth complete all as specified and directed. Note : Water Proofing Compound shall be measured and paid seperately under releevent item here-in-above.

M&L preparation of new plaster surfaces and applying 2 coats of acrylic Emulsion (weather coat) paint over and incl one coat of primer all as specifed and directed.

M&L applying two coat of white wash on ceiling including preparation of old surfaces of ceiling.

Taking down/disconnecting wash hand basin any type and discription and S & F wash basin, vitreous china oval type of size 550 x 400 mm excluding tap waste, chain and plugs and porcelain stopper but including brackets, cutting for and pining in ends of brackets or erecting stand and exclusive of fixing of waste pipe complete all as specified.

S & F 15mm bore brass CP wash basin mixture for mixing hot and cold water complete all as specified fixed as in repair. Make: Prayag or equivalent.

S & F 15 mm dia brass CP wall mixer unit for mixing hot & cold water screwed down for iron pipe and fixed as in repairs. Make: Prayag/Jaquar/Hindware.

Taking up or down 15mm bore steel water tubing and fitting from any position including cleaning for refixing or removal of the same from site complete all as specified.

S & F 15mm bore steel tubes ISI marked galvanized medium grade with all fitting fixed to wall ceiling or laid in floors complete all as specified and directed.

Refixing 15mm bore old steel tubing and connecting in new or old position as directed in walls ceiling or floor etc complete all as specified and directed

Taking up or down 20mm bore steel water and fitting fron any position incl cleaning for refixing complete all as specified and directed

S & F 20mm bore steel tubes ISI marked galvanized medium grade with all fitting fixed to walls ceiling or laid in floors complete all as specified and directed

Refixing 20mm bore old steel tubing and connecting in new or old position as directed in walls ceiling or floor etc complete all as specified and directed

S & F 15mm bore brass CP bib cock, fancy type cost copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete fixed in repair all as specified and directed.(Make: Prayag or equivalent).

S&F 15mm bore concealed brass CP stop cock/ angle cock screwed both ends for iron pipe fancy type with long shank and cup or incl and fixed in repair complete all as specified and directed (Make: Prayag or equivalent)

S & F 15 mm bore PVC connection with PTMT nuts of length 600 mm. (Make: Prayag or equivalent)

M & L Brass CP shower rose with swivel joints, size 125mm, fixed in repair complete all as specified and directed.

S & F in repair vitreous china wash down water closet pan (padastal pattern) Coloured including Jet system & matching coloured seat covered fixed complete all as specified.

S & F in repair 10 ltr Vitreous China valveless, syphonic action type, flushing cistern low level, white, with inlet, ball valve, float and handle including brackets and down pipe. (Make: Prayag or equivalent)

S & F 20mm dia, 'D' type, 60cm long between flanges, aluminum anodised, tubuler towel rail all as specified and directed

M & L Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

M & L one coat sythetic enamelled paint on old wooden surface incl preparation of old painted surface over 10cm width or girth complete all as specified and directed.

M & L 25mm thick PCC 1:2:4 type B1 using 20mm graded aggregate as in floor

S & F repair grating doom 100mm dia of PTMT (Minimum weight 25 gms).

Dismantling water tanks and removing to store exceeding 250 and not exceeding 500 ltrs capacity

S & F 500 ltrs capacity rotational moulded polyethene water storage tank cylinderical vertical with closed top hoisted and fixed in position complete all as specified and directed (ISI Mark).

S & F 20 mm dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed as in repairs.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.

S & F sheet glass, 3 mm thick, ordinary quality and glazing ground or obscured or frosted on one side with oil putty in square n exc 0.5 sq. m in each pane.

S & F sheet glass, 3mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane.

S & F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples.

S & F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor.

S & F aluminium anodised, barrel tower bolts of extruded section and fixed of 150 mm size.

Demolition of brick work built in cement mortar or cement lime mortar.

M & L for brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6.

Same all as item Srl No 44 above but except bricks.

S & F 100mm size hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws

S & F in repairs 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete.

Taking down soil, waste and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

S & F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors

Same all as item Srl No 49 above but 75mm dia

S & F 110mm dia PVC (SWR) bends with access door.

Same all as item Srl No 51 above but 75mm dia.

S & F 110mm dia PVC (SWR) branch piece, single (single Y) equal or unequal with access door.

S&f Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 110mm dia pipe

Same all as item Srl No 54 above but for 75mm dia pipe.

S & F 110mm dia PVC (SWR) vent cowl

M & L for 75mm thick cement concrete 1:3:6, type C2 using 40mm graded stone aggregate as in plinth protection.

S & F in repairs toilet paper holder, coloured, vitreous China, box type

S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long as in repairs.

Taking down chowkhats or frames not exc. 1.5 sq. m each complete all as specified and directed.

S & F anodised aluminium window and ventilator shutters, side hung type without sash bars with powder coating of any colour (Thickness or powder coating not less than 50 micron), aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified.

S & F mild steel framed work such as ladders walk ways; railings; and similar work con- forming to Fe.290.Gde-E-165

Removal of existing detoriated decayed tarfelt or any other treatment including PCC padding, loose surface & removing the debris to a distance n.exc 50m depositing where directed complete all as specified.

M & L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc

M & L cutting out cracks to V section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3

M & L plain cement concrete (1:2:4) type B0, (12.5mm graded stone agg) as in filling under undulation of roof top/chajjas complete all as specified and directed

M & L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per square meter including cleaning surfaces

M & L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified & applying two coats of aluminium paint.

M & L for bitumastic gola, with 80/25 bitumen and coarse sand mixture. 1:3 by weight, 8cmx8cm at the junction of roofing to vertical surfaces

M & L for 100mm thick PCC 1:4:8, type D2, using (40mm graded stone aggregate) as in sub- base floor.

M&L for 50mm thick crushed stone sand/ river sand as in cushening layer below interlocking paver tiles well compacted to a true surface.

M&L Stone kerb of machine pressed coloured precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate, block of size 30cmX45cmX15cm finished at top bullnosed shape and finished surface even and smooth using coloured pigment and jointed in CM 1:6 struck finished.

M&L applying two coats of synthetic enamel paints in zebra pattern for stone kerb as directed by Engr-in-Charge

M & L for machine pressed precast concrete Interlocking paver block glosy finish in grey cement with pigment confirming to IS 15658-2006 of 60mm thickness M-35 Grade, of size shape colour and pattern as directed laid dry.

Excavating in post holes (or similar holes) in hard/dense soil each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed.

M & L cement concrete (1:3:6) type C2 (40mm graded stone Agg.) as in embedding of angle iron post all as per specified and directed.

S & F rolled section as in main and cross beams, hip and jack rafters, purlines where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting platesFe-290Gde E-165 including nuts & bolts and welding complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of grade Fe-410- W(Gde- E-250) also welding, fastening and fixing complete.

S&F Mild steel screw bolts (machine made) 11 to 15mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm (Profiled) thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall of mangalore pattern design, fixed with self tapping screws as specified & directed.

S & F mild steel flat iron as in wind tie for roof including securing bolts.

M & L two coat of black bitumious paint on steel/wood/concrete surface exc 10cm width or girth all as specified and directed.

Surface excavation n. exc 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil.

Removing excavated materials (soil), n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point all as directed by the Engineer-in-Charge.

M & L two coat of Synthetic enamel paint over a coat of aluminium red oxide on steel surface including preparation of steel surface width or girth exc 10cm all as specified and directed.

Excavation over areas n exc 1.5 m deep and getting out in Soft/Loose soil complete.

M & L for PCC 1:4:8 type D-2 (40mm graded aggregate) as in foundation filling & mass concrete

M & L for walling of random rubble uncoursed ,brought up to course well bonded, bedded and solidly hearted built in CM 1:6.

M & L for PCC 1:2:4 type B1 as in band, coping, bed plate etc.

M & L pre cast cement concrete type C1 1:3:6 (using 20mm graded aggregate) as in bond stone set in cement mortar 1:6 complete.

M & L for loose filling of broken stone or boulders with aggregates of gauge 40 to 80 mm at back of sloping face all as specified and directed.

Returning, filling in, including spreading, levelling ,watering and well ramming in layers not exc 25cm complete all as specified.

M&L for keyed pointing to random rubble, uncoursed or brought upto course in CM 1:3.

Rendering 15 mm thick in CM 1:4 on stone masonary surfaces or surfaces other than fair faces of brickwork and finishing even & smooth without using extra cement.

M & L preparing plastered/ unplastered new surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, holder, bell,bell push,regulators, sockets etc removing materials for taking credit and making good disturbed surfaces of walls, floors, etc.

Taking down unservicable/partly unservicable light fittings any type, tube light fitting and fixtures, etc, and making good to the disturbed surfaces of walls/floor etc to macth with existing surfaces including white washing/colour washing/distempering to match with existing wall/floor/ceiling finishes.

Dismantling unserviceable main switch/ kitkat DBs/ MCB including wooden board from existing position and making good disturbed surfaces of wall to match with existing surfaces.

Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed sufaces to match with the existing surfaces.

Point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm stranded for earth continuity wire, to be drawn in and including, PVC medium grade onduit not less then 20 mm width with MS sheet metal sunken switch/Terminal box 1.2 mm thick and ebonite switch board cover 3.0 mm thick or PVC moulded switch board and brass screws with cup washers including all necessary wall cutting and making good disturbed surface all as directed and specified Make of cable - FINOLEX / PLAZA / HAVELLS & Make of PVC conduit & conduit accessories - PLAZA /FINOLEX/BERLIA. Note : (i) Making good to match with the adjoining surface shall be included in the unit rate. (ii) Rate is inclusive of Cutting/chases of wall/floor/ceiling.

One light point controlled by one, one way switch.

One ceiling /exhaust fan point controlled by one switch and regulator.

one 3 pin 5 amp socket out point on the same board with other switches.

One3 pin 5 amps socket out let point on independent board.

One bell/buzzer point controlled by one bell push.

Same all as item Srl No 100.01 above but for one socket outlet 15 Amp on independent board with 2.5 Sq mm cable and 1.5 Sq mm earth wire.

S & F Switch piano flush type single pole one way 5 amps.

S & F Socket out let 2 in one, 5/3 pin 5Amp

S & F Switch socket combination 5 Amps 5 pin flush type.

S & F Switch socket combination 5 in 1, 5 pin 5/15 Amps flush type universal .

S & F Ceiling rose, surface bakelite 65x50 mm three terminal.

S & F Call bell AC-230 Volt single pole ding dong.

S &F Bell push, flush type 5 Amps.

S & F Lamp holder insulated bodywith back plate, incudig LED lamp 9 watt for angle holder all as per specified.

S & F Electronic regulator 100/120 Watt step type.

Note :- for Item No-102 to 110. Make Havells/Strandred/Anchor/Leader

S & F LED tube light fittings decorative ultra slim linear fixture with extrudedalluminium heat sink envioromentel friendly Energy efficient ready to use pack ,1x20/18 Watt ,4 feet,surface mounting type extruded pvc, snap on installers and domestic electronic Driver ,connector block ect.with all assoceries intenallt prewired & includingconeecting up with 2 core flexible cppper conductor cable with sutable size & suitable for and mounting clamps PVC squre box 75x75mm - 2 nosetc. Make- Crompten /Havells /BAJAJ/Philliphs

S & F LED tube light fittings decorative ultra slim linear fixture with extrudedalluminium heat sink envioromentel friendly Energy efficient ready to use pack ,1x10 Watt ,2 feet,surface mounting type extruded pvc, snap on installers and domestic electronic Driver ,connector block ect.with all assoceries intenallt prewired & includingconeecting up with 2 core flexible cppper conductor cable with sutable size & suitable for and mounting clamps PVC squre box 75x75mm - 2 no setc. Make- Crompten /Havells /SURYA /Philliphs

Taking down Old street light fitting & Supply and fix LED security light fitting of 45 watt, with high power LED & LED driver of make CROMPEN / Wipro/Philips/Havells

Fabricate,supply & fix GI pipe bracket suitable for 25w security light fitting ,made out of 25mm dia- 0.9m long & 2 set of clamps made out of 30x5mm ms flat & fixed with anchor bolt including Taking down of old unserviceable bracket

Taking down ceiling fan /exhaust fan of any size or make

Hanging only ceiling fan 1200mm Sweep by providing fan hooks in proper manner and making connection withT 3 core copper cable including painting all as per specified and directed by Engr-in-Charge.

Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 6 Sq mm, earth continuity conductor of size 4 Sq mm to be drawn through and including PVC conduit 25 mm dia medium grade conceled in walls/roof/floors all as directed by Engineer in Charge.Notes:- (i) Two wires of 6 Sq mm and one wire of 4 Sq mm and one run of PVC conduit shall be measured as one unit.

MCCB DB VERTCLE TYPE made of sheet steel , powder painted with NUTRAL bus bar 200 A, neutral link, IP-43-IK09 protection grade , 415Volts TPN with 4 way Double door , L&T CAT NO-LTVD04MN/ / LEGRAND CAT NO-607913/ equivalent of ABB

MCB DB made of sheet steel , powder painted with NUTRAL bus bar 200 A, neutral link, earth bar and Din rail ,240Volts SPN with 8 way Double door , IP-43-IK09 protection grade,L&T CAT NO-LTSD08GN/ / LEGRAND CAT NO-607711/ equivalent of ABB

NOTE FOR ITEM NO 119 & 120 -(i).The unit rate includes for cutting the brick walls to accommodate DB to make flush to wall./ DB tobe fixed on wall including frame made out of MS flat 40x5mm(2).The unit rate includes for making good the disturbed surfaces including finishes to match with the adjoining surface

Supply & fixing amp rating MCB SPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 6-32Amps

Supply & fixing MCB SP 6-32 Amps 'C' series, breaking capacity 10 KA of rating.

Supply & fixing MCCB TPN 160 Amps , 415Volts, 36KA ,4 POLE adjustable types.

NOTE FOR ITEM NO 121 to 123. MAKE OF MCCB & MCB - LEGRAND/ABB/L&T

Earthing complete with galvanized steel earth plate electrode 600mm x600 mm x 6mm buried directly in ground vertically to a depth not less then 2.25 meter below normal ground level with top edge of the plate not less then 1.50 meter below normal ground level connected to galvanized earth wire 4.00 mm dia by means of bolts, nuts, check nuts and washers complete up to and including test point made out of 40 x 6 mm alum flat including earthing pit, charcoal common salt, Earthing lead 4.00 mm dia up to 7.5 m, 20 mm dia medium grade GI watering pipe, G.I. protection pipe 15 mm dia up to 7.5 m long, PPC pit in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate, PCC pit cover including earth work complete all as shown in electrical plate No-5 of SSR-2009 (Part-I).

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 4.0 core all as specified and directed by Engr-in-Charge.

unwashed Sand cushioning to under ground cable provided with a layer of 8 cm deep before laying and 15 cm covering above the top edge of cable after laying complete all as specified. Note : maesurement shall be done after puning down of sand.

Brick covering with width equal to length of bricks as mechanical protection to cable with well burnt sub class `B` bricks laid dry and flat complete all as specified and as directed.

Steel tubing GI light grade for cable protection passing under road /floor or for fixing to poles all as specified and as directed of size 80 mm dia Make - ITC / JINDAL /ZENITH/TATA/ PRAKASH SURYA

Steel tubing GI light grade for cable protection passing under road /floor or for fixing to poles all as specified and as directed of size 40 mm dia Make - ITC / JINDAL /ZENITH/TATA/ PRAKASH SURYA

Supply only Water Proofing Compound of ISI Mark.

Schedule of credit amount of Rs. 47,860.00 to be deducted during AOC

M/S CHETAN PRAKASH GOYAL

ELCON

Skyline Encon

LAL SINGH & SONS

DOBARIA BUILDCON