Loading…
Loading…
Tender Value
₹32.8 L
EMD Value
₹33,000
Closing Date
26 Mar 2026, 3:00 pmClosed
Superintending Engineer, Tribal Welfare, Warangal
Opp: Dr,Ambedkar Bhavan, Ashok Colony
1) Providing Minor repairs to AHS Karakagudem (V) Karakagudem (M) of Bhadradri Kothagudem District, 2) Providing Minor repairs to AHGS Elechireddupalli (V) in Pinapaka (M) of Bhadradri Kothagudem District
685770
SE/TW/WGL/NIT/500/Package/2025-2026, Dt: 09.03.2026 (2ND CALL)
OPEN
Road Work
BHADRADRI KOTHAGUDEM
13 documents required · 9 mandatory · 4 optional
₹1,160
₹33,000
11 Mar 2026
11 Mar 2026
11 Mar 2026
1) Providing Minor repairs to AHS Karakagudem (V&M) of Bhadradri Kothagudem District
Earth work excavation for foundation and depositing on bank (manual means) with initial lead of 10m and initial lift of 3m in Loamy & Clayey Soils like BC Soils, Red Earth & Ordinary Gravelly Soils ( SS 20-B) including all operational incidental labour charges such as shoring, strutting, sheeting, planking and dewatering including cost of hire charges of T & P, labour charges etc., complete for finished item of work excluding seignerage charges and dewatering charges etc., complete for Foundation of Building.(APSS No. 308) (SBC-20t/Sqm)
Plain Cement Concrete (1:5:10) proportion (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Broken Granite (IS383, 1970) machine crushed metal from approved quarry including cost and conveyance of all materials like cement, natural river sand and Manufactured Sand (Rock sand) in the ratio of 50:50, coarse aggregate, water etc. to site, mixing concrete in concrete mixer including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work (APSS No. 402)excluding seignerage & GST charges for Floor Bed
Vibrated Reinforced Cement Concrete M20 Grade Nominal Mix corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (natural river sand and Manufactured Sand (Rock sand) in the ratio of 50:50) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) including centering, shuttering, laying concrete, vibrating, curing etc. complete excluding seignerage & GST charges for Footings.
Vibrated Reinforced Cement Concrete M20 Grade Nominal Mix corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (natural river sand and Manufactured Sand (Rock sand) in the ratio of 50:50) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) including centering, shuttering, laying concrete, vibrating, curing etc. complete excluding seignerage & GST charges for Columns.
Vibrated Reinforced Cement Concrete M20 Grade Nominal Mix corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (natural river sand and Manufactured Sand (Rock sand) in the ratio of 50:50) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) including centering, shuttering, laying concrete, vibrating, curing etc. complete excluding seignerage & GST charges for Plinth Beams.
Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. APSS No.309 & 310
Brick Masonry in superstructure with CM (1:8) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm, for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust with a compresive strength not lessthan 50 kg/sqm including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., for Superstructure Walls.
Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) dubara sponge finish including cost and conveyance of all materials like cement, natural river sand and Manufactured Sand (Rock sand) in the ratio of 50:50, water etc., to site, seigniorage charges, sales & other taxes on all materials,all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, finishing, curing, etc., complete for finished item of work. (APSS 901,903 & 904)
Providing High Yield Strength Deformed (HYSD) steel bars (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lapsplicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, laour charges such as cutting, bending placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. (APSS No.126)
Supply and fixing of Window size 1.05x1.20 M Signle Leaf Window shutter of wood section 100mmx65mm along with double Flush door shutters solid bond wood block board type with commercial ply on both faces 30mm thick conforming to IS 2202 with E Type teak Wood Beeding alround the flush shutter including fixtures such as Hardwarer fixtures ie., MSPC Butt Hinges 150mm long 6 Nos. MSPC Handles 125mm long 2 Nos., MSPC Tower Bolt 150mm long 2 Nos. MSPC Aldrop 300mm long 1 No.s MS Hodl Fast 6 Nos. and Heavy duty Door stopper 2 Nos. including cost and convayance of all materials for making door fixing of fixtures etc., for finishing item of work out threshold
Supply and fixing of Masquito Mesh to Window of size 1.20x1.50m with SS Mesh and alround Teak Wood beeding of size 50x25 mm thick duly fixing masquito mesh frame size 1.20x1.50m including cost and conveyance of all materials and labour charges etc., complete.
Painting to new internal walls with two (2) coats of ready mixed oil bound washable distemper acrylic base of approved brand and shade over a base coat of cement primer water base interior Grade-I of approved brand, makind three (3) coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work in all floors for internal walls (SS 911)
White washing two coats with paint grade white lime for wash or equivalent quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work in all floors for walls
Painting to New External Walls with two coats of Polymer Plastic Emulsion paint of Asian / Berger / Nerolac / Saicoat / Endocem or equalent quality of approved brand and shade as approved by the Engineer - in - Charge over base coat of cement primer water base grade -II exterior making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for external Walls.(APSS No. 911)
WATER SUPPLY & SANITARY ARRANGEMENTS
Supply and fixing of Premium make CPVC Pipes Of 28.60mm OD Pipe- SDR 13.50 including cost and conveyance of all materials to site, labour charges etc., complete for finished item of work.
Supplying & Fixing of 15mm brass body CP finish bib tap of not less than 300 grams weight screw type (full turn) with internal / external threaded connection conforming to IS 8931 including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work for All Floors.
ELECTRIFICATION
Supply and transportation of 60WATT . LED Flood light Luminaire made of pressure die cast aluminum housing with powdercoated, having toughened glass cover,IP 65/66 (Silicon gasket ensures Optical & Electrical compartments are IP 66 )protected, input voltage range of 100 to 270 volts AC,power factor ≥ 0.90, high power LED's having efficacy 130lumens/watt and junction temperature < 85 degree centigrade of IP65 with optics, total harmonic distortion less than 125% at 110 Volts AC, driver efficiency ≥925% etc complete. LUMINAIRE MAKE : PHILIPS / OSRAM / GE / CROMPTON / BAJAJ / SCHREDER / VIN / HALONIX / HAVELLS / HPL.LED MAKE : PHILIPS LUMILEDS / CREE / N
Supply and fixing of 6A 3/2 pin flush type socket with 6A switch control of Anchor/ Gold medal olive/ Million zoom make with ISI mark on a common switch board with earth continuity including wire leads, earth connections including cost and conveyance of all materials to site, labour charges etc complete for finished item of work.
Supplying and wiring with 2 runs of14/0.30 mm (1.50 Sq.mm Fire Retardant (FR) P.V.C insulated flexible copper cable L&T/ Havels /Standard/Polycab/Power flex make with ISI mark in the existing metallic / non-metallic conduct pipe with 6A flush type switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including cost and conveyance of all materials to site, labour charges etc., complete for finished item of work for light, bell, fan and exhaust fan points in Non Residential Buildings
2) Providing Minor repairs to AHGS Elechireddypalli (V) in Pinapaka (M) of Bhadradri Kothagudem District
Filling with Sand in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including all operational, incidental, labour charges, seignorage charges, hire charges of T & P etc., complete for finished item of work. APSS No.309 & 310
Supplying & fixing of Door Size 1.22x2.13 Mtrs (Double leaf) flush door shutters Wood Section 100mmx 65mm along with bouble Flush Door shutter solid bond wood block board type with commercial ply on both faces of 30mm thick including fixures such as Mild Steel :E: type hold fasts 6 Nos. MS Powder coated tower bolts I.S 204.300mm long and 10mm BOLT dia 2 Nos. MS Powder Coated handles IS 208 125mm long 2 Nos. MS Powder coated Tower blotss 150mm long 2 Nos. MS Powder coated Aldrop IS 2681 300mm long 1 No. MS Powder coated Door Stoppr 2 Nos. sales and other taxes cost and conveyance of all materials to site all labour charge such as making of door frame ixing in positioni fixing of shutters & hard ware fixtures, etc., complete for finished item of work. The frame should be embedded to a depth of 40mm in the flooring.
Supply and fixing of Masquito Mesh to Window of size 1.20x1.50m with SS Mesh and alround Teak Wood beeding of size 50x25 mm thick duly fixing masquito mesh frame size 1.20x1.50m including cost and conveyance of all materials and labour charges etc., complete.
Flooring with soluble salt porcelain vitrified tiles screen printed and polished of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs of make Jhonson & Jhonson, Kajaria, Nitco, Marbonite, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, natural river sand and Manufactured Sand (Rock sand) in the ratio of 50:50 water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, .
Painting to new internal walls with two (2) coats of ready mixed oil bound washable distemper acrylic base of approved brand and shade over a base coat of cement primer water base interior Grade-I of approved brand, makind three (3) coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work in all floors for internal walls (SS 911)
Providing and fixing of factory made solid Wood Polymeer composite (WPC) Single extruded Door frame section of 100*65 mm with encapsulation of 6mm rigid layer on all external surfaces . The Door frame willhave a rabate of 32mm/37mm. The two vertifical members are to be joined together with the horizonal member using 8x75mm long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The rady /assembled door frame is fixied to wall using Z hand fast 300 MM long hold fast
White washing two coats with paint grade white lime for wash or equivalent quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work in all floors for walls
Painting to New External Walls with two coats of Polymer Plastic Emulsion paint of Asian / Berger / Nerolac / Saicoat / Endocem or equalent quality of approved brand and shade as approved by the Engineer - in - Charge over base coat of cement primer water base grade -II exterior making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for external Walls.(APSS No. 911)
WATER SUPPLY & SANITARY ARRANGEMENTS
Supply and fixing of Premium make CPVC Pipes Of 28.60mm OD Pipe- SDR 13.50 including cost and conveyance of all materials to site, labour charges etc., complete for finished item of work.
ELECTRIFICATION
Supply and fixing of 6A 3/2 pin flush type socket with 6A switch control of Anchor/ Gold medal olive/ Million zoom make with ISI mark on a common switch board with earth continuity including wire leads, earth connections including cost and conveyance of all materials to site, labour charges etc complete for finished item of work.
RUPEES THIRTY TWO LAKHS SEVENTY SIX THOUSND FOUR HUNDRED NINETY FIVE ONLY
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
BID 500.doc
TENDER_DOCUMENT • 0.47 MB
BOQ 500 AHS KARAKAGUDEM.xlsx
TENDER_DOCUMENT • 0.56 MB
Download all tender documents and submit your bid