Construction of Barracks with 50 Nos. Bed for Armed Reserve Police with development works at Puthupalayam in Tiruppur City.

Amount

E0001) Earth work excavation for foundation in all soils (including refilling) a) 0 to 2 mt.

E0003) Earth work excavation in Soft disintegrated rock (including refilling) a. 0 to 2 mt

b. 2 to 3 mt.

E0005) Earth work excavation for Open foundation (excluding refilling) a) 0 to 2 mt.

E0006) Earth work excavation for Open foundation for drains (excluding refilling) width upto 1.25 m a) 0 to 2 mt.

E0007) Earth work excavation in Soft disintegrated rock (Excluding refilling) a) 0 to 2 mt.

RE0006) Providing Pre-Constructional Antitermite treatment

F0040) Supplying and filling in foundation and basement with filling crushed stone sand

F0006) Supplying and filling with 40mm size Hard broken stone jelly in foundation and basement

F0007) Supplying and filling with 20mm size Hard broken stone jelly in foundation and basement

F0026) Filling in foundation and basement and other similar works with Excavated earth

F0016) Supplying and filling stone dust

F0013) Supply and filling in foundation and basement with gravel (including Tax collected by Govt per Cum)

F0042) Supplying of stone dust including conveyance and cost of materials etc

F0043) Supplying of 3 to 10mm size HBSJ including conveyance and cost of materials etc.,

FL0115) Supplying, delivery and fixing of 83mm tk rubber moulded hydraulic pressed paver block including conveyance charges

CSMP0002) Plain cement concrete 1:5:10 (One of cement, five of crushed stone sand and ten of hard broken stone Jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and basement using 40 mm gauge hard broken stone jelly

CSMP0003) Plain cement concrete 1:2:4 (One of cement two of crushed stone sand and four of Hard Broken Stone jelly) (including Mortar Plasticizer (Liquid) at 200ml per bag) using 20mm gauge hard broken stone jelly

CSMP0004) Plain cement concrete 1:8:16 (One of cement, eight of crushed stone sand and sixteen of broken brick jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and other similar works using 20mm gauge broken Brick Jelly

CS0038.I : Precast Cupboard slab 40mm tk using standardised concrete mix M20 grade.(using crushed stone sand) a. In Foundation and Basement

C0065) Providing and laying in position, Standardised Concrete Mix M-20 Grade in a accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for the all RCC items of works a) In Foundation and Basement

b) In Stilt / Ground Floor

c) In First Floor

d) In Second Floor

C0055: R.C.C.Door frames of size 100 x 75mm with one edge grooves size 't' x 20 mm using M20 grade ( with out vibrating charges) c. 1000 x 2100 mm

CSMP0001) Supplying and fixing of fibre mixed precast slab of 50mm thick of all required shapes made in cement concrete 1:3:6 (one of cement,three of crushed stone sand and six of 20mm hard broken stone jelly including Mortar Plasticizer (Liquid) at 200ml per bag)

BMP0010) Brick partition walls 50mm thick using kiln burnt country bricks of size 8¾”x4¼”x2” (22x11x5cm) in cement mortar 1:4 (One of cement and four of sand) including Mortar Plasticizer (Liquid) at 200ml per bag) for superstructure in the following floors a. In Ground floor

b) In First Floor

BMP0011) Brick work in cement mortar 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in foundation and basement

BMP0012) Brick work in Cement Mortar 1:6 (One of cement and six of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² for superstructure in the following floors a) In Stilt / Ground Floor

b) In First Floor

c) In Second Floor

BMP0013) Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 110mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in the following floors a. In Foundation and basement

b) In Stilt / Ground Floor

c) In First Floor

d) In Second Floor

BMP0014) Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 70mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in the following floors a. In Stilt / Ground floor

b) In First Floor

FLMP0001) Flooring with a bed of CC 1:5:10 (one of cement, five of crushed stone sand and ten of hard broken stone jelly including Mortar Plasticizer (Liquid) at 200ml per bag) using 40mm size hard broken stone jelly

FLMP0002) Plastering the top of flooring in CM 1:4 (One of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

FL0024) Finishing the top of flooring with cement concrete 1:3 (One of cement and three of blue granite chips of size 10mm and below) 20 mm thick Ellispattern Flooring (No Sand)

FL0025) Weathering Course with concrete broken brick jelly 20mm gauge

FLMP0004) Finishing top of roof with one course of Pressed Tiles of approved superior quality of size 23cmx 23cmx20mm thick laid over weathering course in CM 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag,) 12mm thick mixed with Water proofing compound at 2%

FLMP0005) Supplying and fixing of Colour glazed tiles (Best approved quality and the same shall be got approved from the Executive Engineer before using) over cement plastering in CM 1:2 (One of cement and two of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10mm thick

FLMP0006) Supplying and fixing of colour Ceramic Tiles Anti skid without corrugated design for flooring over cement mortor 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

FLMP0009) Supplying and fixing of Stain free Nano polish Vitrified Tiles of size (600x600x8mm) for flooring and other similar works in cement mortar 1:3 (one of cement and three of crushed stone sand, including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

FLMP0011) Supply and laying superior variety Concrete Designer tiles for flooring in CM 1:3 (One of Cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

FW0004) Providing Form work and centering for reinforced cement concrete works a) For Column footings, plinth beam, Grade beam, Raft beam, Raft slab etc.,

b) Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase waist, portico slab and other similar works

c) For Square and rectangular columns and small quantities such as sunshade, parapet cum drops window boxiing, fin projection and other similar works.

d) For Vertical wall

f) For Curved surface

PLMP0001) Plastering with CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick

PLMP0002) Plastering with CM 1:4 (one of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick

PLMP0003) Special ceiling plastering in cement mortar 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10mm thick

PLMP0004) Plastering in cm 1:3 (one of cement and three of crushed stone sand (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm tk. mixed with water proof compound at 2%

PLMP0005) Plastering in CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick for border finish in all floors a) 150mm wide border

b) 75mm wide border

c) 50mm wide border

PA0001) White washing three coats using clean shell lime slaked

PA0022) Painting the new wood work with two coats of approved first class synthetic enamel ready mixed paint in addition to one coat of Primer

PA0026) Painting the new Iron work and other similar works such as PVC /ASTM Pipes, Kerb Stone and grills with two coats

PA0032) Supplying and applying of full putty one coat with aproved make wall putty for smooth finishing the new cement plastered walls

PA0037) Painting the New walls with two coats of approved best ready mixed plastic emulsion paint for inner walls

PA0042) Painting the New walls with two coats of approved best ready mixed exterior emulsion paint outer walls in addition to one coat of approved primer coat

PA0027) Providing wooden Melamine polish for new wood work

J0001) Supplying and fixing of Teak wood wrought and put up a) Teak wood over 2m and below 3m length

b) Teak wood below 2 m length

J0021) Supply and fixing of best approved superior variety magnetic door catches

J0024) M.S.Holdfast

JV0022) Supply and fixing of UPVC (Un plasticized polyvinyl chloride) Louvered ventilators

JW0045) Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open)

JD0095) Supply & Fixing of 25mm (+/- 1mm) thick Qute WPC Decora Door which is extruded as a single core door with Lead-Free compound. The door is designed homogeneously by Smooth Routing and 3D embossed grains on one side. The other side of the door shutter shall be plain mat finish.

JW0007) Supplying and fixing of teakwood glazed french window shutters and 5.5mm thick plain glass for panels including labour charges and cost of furniture fittings French window shutters of size 1.00 x 1.950m

JD0098) Supplying and fixing of best Indian Teak wood paneled door of Double leaves shutters Brass furniture fittings a) 1800 x 2100mm (Double Leaves)

JD0059) Supplying and fixing of Single leaf Solid core flush door shutters Suitable for Door of size b) 1000 x 2100 mm

GR0001) Supplying and fixing Mild Steel grills as per the design approved

RE0004) Supplying, fabricating and placing in position of Mild steel Grills / Ribbed Tor Steels (without cement slurry)

CS0010) Cuddappa slab 20 mm tk.for C/B slab. a. Ground floor

b. In First floor

CS0015) Cuddappa slab 40 mm tk.for C/B slab. a. Ground floor

b. In First floor

JD0094) Providing T.W.double leaf shutters for cupboard/ward robes with 9mm thick phenol bonded BWR grade plywood

FLMP0018) Supplying and fixing of pre-cast kerb stone of size 450x300x150mm made in CC 1:3:6 (One of cement, three of crushed stone sand and six of hard broken stone jelly) using 20mm size hard broken stone jelly including Cost of Mortar Plasticizer (Liquid) at 200ml per bag

WS0002) Supplying and fixing of 110mm dia PVC SWR pipe with ISI mark conforming to IS 13952:1992- type `A` for Rain water down fall pipe

MS0050) C.I. Steps ( 5 kg)

WS0033) Supplying and fixing of half turn C.P Long body Tap of 15mm dia

WS0036) Supplying and fixing of half turn C.P short body Tap of 15mm dia

MS0053) S&F of C.I Manhole cover 60 x 60 cm (50kg weight )

WS0006) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40 of wall thickness a) 32mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI/GM specials

b) 25mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI/GM specials

WS0007) G.I Pipe 20mm dia for Hot water line (Fully Concealed in walls)

WS0276) 20mm dia PVC water supply ASTM pipe (fully consealed in walls)

WS0107) Providing PVC Tee with end cap

WS0018) Supply and fixing of following dia GI Specials of best approved quality,with ISI mark including cost and conveyence and fixing in position etc., VI.a. 50mm dia GI Union

VII.a. 50mm dia GI Hex nipple

VII.e. 25mm dia GI Hex nipple

IIII.g. 20mm dia GI Bend

III.b. 50mm dia GI Bend

X.a. 50 mm dia G.M Non return value

IX.C. 32mm dia GM Gate Value

WS0242) supplying of 40mm dia cast iron adopter etc.,

WS0280) Supplying and fixing of following dia UPVC specials of best approved quality including cost of specials and labour charges for fixing etc., II. a. 50mm dia UPVC Tee

I. a. 50mm dia UPVC Elbow

V.a. 50mm dia UPVC Coulper

VI 50mm x 40mm dia UPVC Reducer

WS0009) Supplying, laying, fixing and jointing the following PVC ASTM pipes (10 Kg/ cm2) in below Ground Level d. 25mm dia

WS0280.XII.C.Supply and delivery following PVC Special d) 90 x 20 mm PVC saddle piece

SA0002) Supplying and fixing of porcelin wash hand basin (white without pedastal), superior variety of size 550x400mm with all accessories

SA0036) Supplying and fixing the following dia PVC(SWR) pipe with ISI mark confirming to IS 13952:1992- type `A` a) 110mm dia PVC SWR pipe of 3metre with required PVC cowl & PVC specials etc.,

SAMP0001)Supplying and fixing 150mm x 100mm size stone ware Gully trap with iron gratings over a bed of 150mm thick brick jelly concrete in CC 1:8:16 (one of cement, eight of crushed stone sand and sixteen of broken brick jelly) using 40mm size brick jelly and brick masonry wall 114 mm thick using chamber burnt bricks of size 9”x4-1/2”x3” (23x11.4x7.5cm)

SAMP0003) Supplying and fixing of PVC Nahani Trap not less than 75mm 4 way / 2 way (Superior variety) including Mortar Plasticizer (Liquid) at 200ml per bag

SAMP0004) Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm x 440 mm of approved make with ISI mark (to be got approved from EE before use) with PVC SWR grade 'P' or 'S' trap (Using crushed stone sand) (including Mortar Plasticizer (Liquid) at 200ml per bag) In Ground floor.

SAMP0005) Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm x 440 mm of approved make with ISI mark (to be got approved from EE before use) with PVC SWR grade 'P' or 'S' trap (Using crushed stone sand) (including Mortar Plasticizer (Liquid) at 200ml per bag) (Other than ground floor)

SA0025) Supplying and fixing EWC superior variety (white) 500mm with PVC SWR grade `P` or `S` trap

SA0033) Supplying and fixing of PVC SWR pipe (Soil line) with ISI mark - type 'B'. a) 110mm dia PVC SWR pipe including all required PVC specials etc., all complete.,

b) 75mm dia PVC SWR pipe including all required PVC specials etc., all complete.,

SA0035) Supplying, laying and concealing the 50mm dia PVC (SWR) pipe with ISI mark confirmed to IS 13952-1992 Type-B for waste water line

SA0048) Supplying, laying and jointing the following dia UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a) 110 mm dia UPVC Non Pressure pipe

b) 160 mm dia UPVC Non Pressure pipe

SA0052) Supplying and fixing of following dia PVC Bend as per IS 10124/1982 Part II with superior variety for joining the pipe a. 110 mm dia PVC bend

b. 160 mm dia PVC bend

SA0155)Supply and Fixing of CP two way bib cock with health faucet

MS0002) Supplying and fixing of 20mm dia aluminium hanger rods

MS0003) Supplying and fixing of Aluminium Towel Rail of 75cm long

MS0006) Supplying and fixing of Aluminium plate with five pin for Coat Stand

MS0007) Providing and fixing iron Chromium plated 8 gauge Picture hook

MS0008)S&F of Bevelled edge mirror 500 x 400 x 5.5mm

L0001) Supply and planting Avenue Trees

L0004) Supplying and fixing of Triangular shape chicken mesh Tree guard

EL0002) Wiring with 1.5 sqmm PVC insulated single core multistrand fire retardant flexible copper cable with ISI mark confirming to IS 694/1990 1.1 K.V. grade cable a) Light point with ceiling rose

b) Light point with bakelite battern type holder

c) Point wiring for calling bell/buzzer with push type switch with required Buzzer.

EL0010) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable for Fan Point

EL0018) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable for Stair case light point

EL0026) Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 K.V. grade cable for 5 Amps 5 Pin plug Socket Point @ Switch Board Itself

EL0034) Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable for 5 Amps 5 pin Plug Socket Point at Convenient Places

EL0041) Supplying and fixing 15 Amps 3 pin plug type socket with switch

EL0214) Earthing and Earth connections: Providing Earthing Station using pipe electrode as per IS 3043 using 2.5m of 40mm and 1.0m of 20mm B-class GI pipe including all requirements

EL0074) Supply and fixing of best approved superior variety concealed type Fibre box with M.S. Fan Hook

EL0075) Charges for assembling and fixing of ceiling fan of different sweep with necessary connections and fixing of fan regulator

EL0078) Supply and delivery of following Electric Ceiling fan with ISI mark with blades and double ball bearing, capacitor,etc., complete a) 48"" Electric fan 1200mm sweep

EL0085) Supplying and fixing of 225mm dia sweep AC exhaust fan of approved ISI quality

EL0070) Supplying and fixing of LED Bulb for suitable for fixing it to pendent / bakelite pattern holder of best approved variety and as directed by the departmental officers. (The materials should be got approved from the Executive Engineer before use) a. 9 watts LED bulb

EL0047) Supplying and fixing of 4'18 watts crystal LED tube light and fixing the tube light fittings

EL0045) Supplying and fixing of water tight Bulk head fitting suitable for 12w LED bulb with guard

EL0100) Supplying and fixing of 25 watts LED bulb with Street light fittings arrangements

EL0072) supplying and fixing of 12 Watts LED Bulb for Bulk head fittings of best quality including cost of material and fixing etc.,

EL0163) Supply and fixing of 32 amps triple pole main switch with fuse and neutral link on a suitable well varnished teak wood board

EL0298) Supplying and fixing of Three phase ELCB

EL0190) Run of main with 2 wires of 2.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

EL0191) Supply and Run off main with 2 wires of 4 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

EL0203) Run of main with 4 wires of 6 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

EL0252)Supply and fixing of 20A Flush type Wall Socket, 20A DP MCB and 32A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug)

EL0549) Labour charges for conveying and laying of UG cables in the cable trench including earth work and providing sand cushion with brick layers below ground level

EL0548) Labour Charges for conveying and fixing of UG Cable of Size of 4 to 25 Sq.mm and 2, 3, 3 1/2 , 4 core with necessary MS clamps and brass screws above Ground Level

EL0337) Supply and delivery of LTUG Cable 3.5 core 50 Sq.mm

EL0174) Supplying and laying of 8SWG GI wire on wall below ground levels

EL0434) Supply and fixing of 63A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame (Angle iron frame 38 mm x 38 mm x 6 mm) work

EL0342) Supplying and delivery of Brass cable Gland suitable for PVC Aluminium armoured LTUG cable h) 3.5 core 50 Sqmm Brass cable gland

EL0358) Supplying and fixing of cable end termination for following PVC / XLPE LTUG Aluminium armoured cable etc all complete and as directed by the departmental officers. a) 3.5 c x 50 sqmm PVC / XLPE LTUG armoured cable

EL0389) Supply and fixing of 7 segment 4 way TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links

NL0001) Supplying. Fabricating and erection of M.S Scheme Name board

WS0236) Drilling of (150mm) vertical bores in hard rock area to any required depth as desired by TNPHC officials including labour charges for grouting the casing pipe after inserting the casing pipe in the drilling hole etc., a) upto 150 mtrs depth below GL

b) From 151 mtrs upto 180 mtrs depth below GL

c) From 181 mtrs upto 210 mtrs depth below GL

d) From 211 mtrs upto 240 mtrs depth below GL

e) From 241 mtrs upto 270 mtrs depth below GL

WS0240) Supplying and Fixing of following Dia Borewell PVC End Cap., including coat of material, cost of conveyance to site etc., all complete b.200mm Dia Borewell PVC End Cap

WS0018) Supply and fixing of following dia GI Specials of best approved quality,with ISI mark including cost and conveyence and fixing in position etc., XIII. c. 150mm dia MS clamp sets

WS0206) Charges for developing the bore well with air compreeor of 300 CFM capacity including cost of transportaion and fuel for compressor and as directed by the departmental officers and conducting yield test `V` Notch Method etc.,

WS0148) Supply and delivery of 150mm dia of PVC casing pipes (6Kg/cm2) without excise duty as per IS 12818/2010 of approved quality for bore wells with average wall thickness of 6.1mm and inter / outer threaded ends in standard length of 3m including transporting charges to site of work

WS0149) Supply and delivery of 150mm dia of Ribbed screen PVC casing pipies (6Kg/cm2) without excise duty as per IS 12818/2010 of approved quality for bore wells with average wall thickness of 8.0mm and inter / outer threaded ends with slots in standard length of 1m to 8mm both in horizontal and vertical cutting including transporting charges to site of work a)150mm dia casing pipes assembly

WS0150) Labour charges for inserting of Following PVC Casing pipes assembly (With slots or without slots) in the drilled hole including jointing the pipes with PVC couplers with cement paste etc., a. 150mm dia casing pipes assembly

WS0278) Supply and delivery of following clear water vertical wet type submersible pump suitable for 100mm/150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. n)Duty : 50 lpm x 100m

WS0279) Supply and delivery of Open well Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. J. Duty : 75 lpm x 60 m.

WS0023) Supplying, delivery and laying of following dia UPVC pipe schedule 80 of approved ISI quality in below G.L a) 32 mm UPVC pipes

c) 50 mm UPVC pipes

WS0235) supply and delivery of required dia nylon rope of superior quality for submersible pumpset in borewell

EL0349) Supplying and fixing of 3 core 4 sq.mm PVC flat cable of approved quality with ISI mark including clamping, earth work excavation and refilling etc.

WS0266) THREE PHASE PANEL BOARD- D.O.L WITH TWO LEVEL GUARD AND AUTO START Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/Three Phase/50HZ(± 5%) and 415 V(±10%) a) For 2 HP

b) For 3 HP

WS0022) Supplying and laying of the following Dia GI pipe in above ground level a) 20mm Dia GI Pipe

b) 50mm Dia GI Pipe

WS0243) supplying of following dia upvc column pipe for borewell including cost of all materials of best approved superior quality with isi mark etc b) 40 mm dia UPVC Column Pipe

WS0162) Labour charges for the erection of Submersible pumpset in borewell / openwell

EL0242)S & F TNEB Meter Board made up of MS box 600 x 225 mm with door and lock and key arrangements

MS0056) supplying of 7 Lever Lock and Key etc.,

NL0006) Supplying and fixing of following size aluminium die casting lettering and numbering with approved coloured powder coated in matt finishing a) 12" dia aluminium dye casting letters

c) 9' dia aluminium dye casting letters

NL0007)Supplying and fixing of following size plastic foam plate of 3mm thick with 3' height vinyl cutting numbers with approved colours etc., a) 20'' x 5" Plastic Foam Plate

NL0005) Supplying and fixing in position of following size aluminium diecasting TNPHC Logo / Emblem with approved coloured powder coated in matt finishing b) 45cm round logo (18")

c) 60cm TNPHC Emblem 23"

EL0229) Supplying and fixing 3 Nos of 100 amps 500 volts grade porcelain fuse unit

SRI SABARI ASSOCIATES (BID ID -1519124)

VELMURUGAN (BID ID -1518922)