Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹62.2 LAccepted-AOC NOT AVAILABLE | FARIDABAD | HARYANA | 121004 | L1 | Accepted-AOC Other than being lowest | |
| 2 | L2₹67.4 L+₹78,541.30 (1.18%)Rejected-Finance FLAT NO 402 4TH FLOOR BLDG NO 31 HANSGEET CO OP HSG SOCIETY PANT NAGAR GHATKOPAR E MUMBAI 400 075 | MUMBAI SUBURBAN | MAHARASHTRA | 400075 | L2 | Rejected-Finance Other than being lowest | |
| 3 | L3₹68.3 L+₹1.6 L (2.46%)Rejected-Finance A 14 USHA SADAN NEAR POST OFFICE COLABA MUMBAI 05 | MUMBAI | MUMBAI | MAHARASHTRA | 400005 | L3 | Rejected-Finance Other than being lowest | |
| 4 | L4₹76.4 L+₹9.8 L (14.7%)Rejected-Finance ROOM NO 206 PART III GANESH MURTI NAGAR COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L4 | Rejected-Finance Other than being lowest | |
| 5 | L5₹88.5 L+₹21.9 L (32.8%)Rejected-Finance ROOM NO 997 GALI NO 3 PART NO 3 GANESH MURTHY NAGAR CUFFE PARADE COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L5 | Rejected-Finance Other than being lowest |
Tender Value
₹1.2 Cr
EMD Value
₹1.9 L
Closing Date
25 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (NW) Mumbai
Commander Works Engineer NW Dr Homi Bhabha Road Navy Nagar Colaba Mumbai 05
REPAIR TO RALLING SAFETY GRILL STAIR CASE AND COMMON AREA OF BLDG IN OLD NAVY NAGAR UNDER AGE BR I UNDER GE NW NAVY NAGAR COLABA MUMBAI
2024_MES_644352_1
8183/CWE(NW)MUMBAI/E8
Open Tender
Civil Works
Item Rate
270 days
GE (NW) Navy Nagar
As per tender documents
7 documents required · 7 mandatory
₹1,000
Yes
GE (NW) Navy Nagar
₹1.9 L
Yes
21 May 2024
27 Feb 2024
27 Mar 2024
27 Feb 2024
25 Mar 2024
19 Mar 2024
27 Feb 2024 - 12 Mar 2024
Amount
Dismantling wrought iron or mild steel work of any description not otherwise provided for embedded in PCC /Brick work all as specified and directed.
Material & Labour Framed work security grill such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 all as specified and directed.
Material and labour for Mild steel work as in flange and tubular mild Steel incl cutting top shape as directed bent to shape drilling holes, hotching for wire etc complete using ERW or induction butt welded tubes confirming to I.S 1161-1979 grade St.-240 all as specified and directed.
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement all as specified and directed.
Material & Labour for preparaing of new surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engr-in-Charge.
Material & Labour for preparaing of old surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engr-in-Charge.
Taking down chowkhats or frames but with shutters (without taking off shutters from the frames) exc 1.5 sqm but n.exc 2 sqm complete all as specified and as directed by Engr-in-Charge.
Taking down chowkhats or frames but with shutters (without taking off shutters from the frames) exc 2 sqm but n exc 4 sqm each all as specified and directed
Material & Labour Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing all as specified and directed
Material & Labour Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing all as specified and directed
Cutting holes in brick walls but in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement lime mortar in cm 1:2;4 type B-1 not exceeding half brick as required depth of embedded portion of holdfasts all as specified and directed
Material & Labour MS works in holdfast made of fe -290 of length all as specified and directed
Material & Labour Aluminium, anodised, barrel tower bolts of extruded section and fixed 150 mm length all as specified and directed
Material & Labour Aluminium handles, cast type, anodised of length 150 mm all as specified and directed
Material & Labour 100mm size stainless steel medium weight butt hinges all as specified and directed
Taking down cement or cement lime plaster on brick or stone walls, any description , ncluding raking out joints, hacking for key, scrubbing down with water, etc. Aluminium handles all as specified and directed
Material & Labour for Plastering on concrete surfaces of ceiling, beams, lintels, walls etc, 20mm thick (15+5mm)in two coats in CM (1:4) , mixed with water proofing compound on fair faces of brick work or concrete surfaces, finished fair & even without using extra cement complete all as specified (WPC to be mixed in setting coat only and shall be measured and paid separately)
Material & Labour for Udaipur White marble/Green marble slab 18-20 mm thick over vertical surfaces of wall, columns pillars and lintel soffit, Material & Labourloor etc and similar work machine cut, bedded and jointed with grey cement slurry over and including 10 mm thick screed bed in cement mortar 1:3 and pointed with white cement using marble dust with admixture of pigment to match the shade of marble slab including grinding , polishing and rounding the edges complete (Note : The rates included the cost of cement screed bed 10 mm thick)
Supply & fixing in repairs for anodised aluminium snap grid frame work for false ceiling with and including 4 mm thick Non asbestoes cement building boards (size of grid 605mmx605mm) including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete .
Supply and fixing Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge.
Material & Labour for 5.5 mm thick repairs frosted glass ordinary quality in square n.exc 0.50 sqm each fixed to aluminium window frame all as specified and directed
Material & Labour for Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples or wooden/ Aluminium beadding all as directed.
Material & Labour applying two coats of oil emulsion distemper white or tinted on wall over a coat of primer & chalk whiting & 2 mm thick Putty on new/Old plasterd surfaces of wall after necessary preparation of surface complete all as specified.
Material & Labour in repairs Aluminium alloy wire cloth,0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed withaluminium wire staples all as specified and directed
Preparing of old decorated surfaces of walls by washing the surfce thoroughly , filling the cracks, craves with crack-filling-compound applying two coats of acrylic emulsion exterior grade (100%) over a coat of primer etc all as specified. Note : - (a) Old surface shall be cleaned with bleaching powder as specified and as per manufacturers instructions , all cracks shall be filled with white cement and sand mortar (1:3) by making V- grooves . (b) Acrylic painting shall be done with rollers.(c)Funges formation be cleaned throughly with wire brush or by any means all as specified and directed
Supply & fix Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop at of primer erected in position as indicated complete push pull or manual type thickness of lath is 1.25mm including taking down old shutters complete all as specified and directed.
Taking down and refixing of steel rolling shutters after carryout necessary repair greasing,top cover, anchoring rod, hasp and staple and erected in position as indicated, complete complete all as specified and directed
Material & Labour for providing and fixing two tyre Gypsum Board false ceiling of 12 thick fxed with screws as per manufacturer's instructions including S &F GI frame work for seamlesss ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to entreintermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including hangers 6 mm dia. GL. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of GI. flat 40 x3 mm size 60mm long and expansion |hold fasteners12,5mm dia. 40mm long complete all as specified.
Supply and fix for 12 mm thick tick ply wood asi n vertical surface as wall pannelling with wooden planks of size 50 mm x 50 mm of second class hard wood having spacing of 600 mm C/C and fixed to wall with nails and finish the surfae with two coats of varnish polish including a coat of primer complete all as specified and directed.
Material & Labour Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty (150 Kg load capacity) and fixed including taking down old u/s one complete all as specified and directed
Material & Labour for one coats of floor paint on old surfaces of chequered tiles/paver blocks in floor including brooming and cleaing the surfaces with water complete all as directed.
Supply & fixing 3mm thick Aluminium composite panel cladding plain of approved colour/shade to facia of slab/beam/column/slab in circular/ rectangular shape including cutting, notching, bending to shape as required jointing with silicon gel of approved colour, with and including aluminium square tubular hollow section 25 x 25 mm not exceeding 900 mm c/c on MS pipe purline/rafter/column beam/slab to hold ACP cladding etc including takingdown old unserviceble aluminium composite panel. (Note : Colour / Pattern of ACP sheet shall be as approved by GE) complete all as specified and directed by Engineer-In-Charge
Material & Labour toughen glass 12 mm thick as in door shutter inlcuding necessary SS hinges complete all as directed including taking down old u/s glass.
Material & Labour Solar control film 50 micron reflective type including taking down old U/S film complete all as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as directed.
Material & Labour Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc & incl set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick cement screed base (1:6) laid complete all as specified and directed.
Material & Labour Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 20 mm thick screed bed in cement mortar 1:6 etc. set and jointed in neat cement slurry and grouted with Epoxy grout to match complete all as specified and directed.
Material & Labour Glazed colour ceramic tiles in vertical surfaces 300 x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match & including 10mm thick backing layer in CM 1:4.as specified and directed.
Material & Labour glazed ceramic tiles in vertical surface 450x350x 7-8 mm thick set and jointed in neat cement slurry over and including 10 mm thick cement plaster in cment mortar 1:4 and pointed in white or colour cement to match complete all as specified and directed.
Dismantling stone slab including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
Material & Labour for Machine pressed precast coloured glazed concrete interlocking paver block with grey cement & pigment, glossy finish (reflective type) any shape and size (as approved by GE) confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, as in pavements to required level & gradients, set, jointed with clean dry sand and sealing the ends using PCC 1:2:4 etc complete.
Material & Labour for Sand filling under floors or in foundation including watering and consolidation etc complete.
Material & Labour machine cut pre-polished kota stone slab flooring 20-25mm thick over and including 15 mm thick cement screed base (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (Note : The rate includes the cost of cement screed bed)
Material & Labour machine cut pre-polished kota stone slab in riser of steps, skirting, dado and pillar laid over and including 10 mm thick cement plaster in cm (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (Note : The rate includes the cost of cement plaster )
Demolition of lime Concrete of any description and in any position not otherwise specifically provided for including china mosaic & wc
Material & Labour for roughening the surfaces of old cement concrete floor by picking, cleaning and washing down with water to remove dust etc. rendering 15 mm thick in CM 1:3 mixed with water proofing compound and applying two coats of hot bitumen 85/25 grade @ 1.70 Kg/Sqm over vertical sides of sunken floors. (Note : WPC shall be measured and paid seperately)
Material & Labour cement concrete 1:7:12 with with 40mm graded stone coarse aggregate in sunken floor all as specified and directed.
Supply only water proofing compound complete all as directed.
Material & Labour in repairs Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe ) including trap set in and including concrete including provision of lime concrete bedding
S &F in repairs Cast iron nahani trap 100 mm dia with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) complete all as directed.
Taking down CI soil/ waste/ vent/ pipes including all fittings like shoes bends swan necks etc of any dia all as specified and as directed. ( Inclusive of scaffolding of any height) complete all as directed.
Material & Labour CI soil/ waste/ vent pipe s in any length with ears 100mm bore ISI marked (sand cast) in any length with cement joints fixed to walls complete all as specified and directed
Material & Labour CI soil/ waste/ vent pipe s in any length with ears 75 mm bore ISI marked (sand cast) in any length with cement joints fixed to walls complete all as specified and directed
Material & Labour CI bends or tee( any radius ) for soil / waste pipes 100 mm bore diminshing pieces or tapers on walls complete all as specified.
Material & Labour CI branch pieces single (equal or unequal ) ordinary or inverted (spigot or socket type) wirh parallel branches for 100mm bore pipe all as specified and directed
Taking out shrubs/vegetation growth from building at any height and at any location with root and applying a glyphosat pesticide or any other equivalent pesticide in a ratio of 1:50 with water on roots including taking down cement plaster not exc 0.50 sqm for each tree and making good surface by plastering the same area with 20 mm thick plastering in cement mortar 1:4 and finishing the surface to match existing surface with necessary scaffolding and other required T&P all as specified and as directed.
Dismantling of Plain or corrugated FRP /Steel chajja any Guage thickness including all fittings and removal from MD land complete all as complete all as directed by Engr In Charge
Material & Labour Pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.
Ditto all as per item No. 58 above but except sheeting( any thickness).
Demolition of brick or strone / boulder work, built in cement mortar in portion/ part ordered to be dismantled including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified .
Material & Labour for cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as directed.
Material & Labour for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as directed.
Material & Labour for applying External Textural painting work as under:- (a) Providing & applying External Texture Bauble Spray. (b) Providing and applying two coats of paint over a coat of primer by approved OEM complete including complete removal of existing treatment washing all as directed. ( Note : Colour as approved by GE)
Material & Labour for 20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.(Note: Sample as approved by GE)
Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi?chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
Supply and fixing factory made uPVC white colour lowered glazed ventilator with fly proof made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5%tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
RAMESH ENTERPRISES
S S ENTERPRISES
satyanarayan conastruction
satguruenterprises
Shetty Construction Co
BOB ENTERPRISES
M/s. MAYUR ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .