Construction of Madaveedhulu Phase-II

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308). Ordinary soils-Mechcanical Means-Upto 3 m depth

Earth work excavation in hard rock (blasting prohibited) (Using Hydraulic Excavator with breaker attachment) upto 3m depth using hydraulic brakers for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting, etc. complete for finished item of work excluding seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308) as directed by the departmental officer including protecting the existing utility services wherever it is possible during the execution and taking all precautionary measures in the restricted areas for laying sewer/water lines including diversion of traffic and disposal of rock upto a lead of 50 m, including all incidental and operational charges etc., complete (Amendment as per SOR 2021-22)-Hard rock (blasting prohibited)-Up to 3 m depth Using Hydraulic Breaker

Plain Cement Concrete corresponding to M10 grade as per IS 456 nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm graded size aggregate from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete but excluding seigniorage charges, for finished item of work for Foundations (APSS No. 402)

Supply and placing of the M 35 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.-Columns footings

Column Pedestals

For columns Ground Floor

First Floor Columns

Second Floor Columns

Third Floor Columns

For Plinth beams

Ground Floor beams

First Floor beams

Second Floor beams

Third Floor beams

Fourth Floor beams: head room, lift room

For ground floor slab (Post Tension) ( at pre stress area) (180 mm thk

For Ground Floor Slab 150 mm thick

For First Floor slab (Post Tension) ( at pre stress area) 180 mm thk

For First Floor Slab 150 mm thick

For Second Floor slab ( at pre stress area) 180 mm thk

For Second Floor Slab 150 mm thick

For Third floor slab (Post Tension)( at pre stress area) 180 mm thk

For Third Floor Slab 150 mm thick

Fourth Floor, head room, lift room Slab 150 mm thick

For Staircase Slab 200 mm thick-Ground Floor

For Lintals Ground Floor ( stores)

Lintels in First Floor (Kitchen)

Lintels in Second Floor (Dining)

Lintels in Third Floor (office)

Lintels in Third Floor (conference)

Providing High Yield Strength Deformed (HYSD) steel bars (Fe 500 grade as per IS 1786-1985) of 8mm to 40mm diameters, (TATA, SAIL, VSP,Jindal & Shyam Steel) cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks, chairs, overlaps, spacers, dowels, wastage etc., and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work (APSS No.126)

Design and execution of post tensioning work, including supplying, laying of HT tendon strands, decoiling, the strands, cutting to the required lengths, laying of HT strands in sheathing (GI corrugated ducts 0.3mm thick) jointing with couplers and inserting the strands, profiling, fixing live end anchorages, making dead end anchorages, including flowering the strands, fixing tendon support bars, supervising the fixing of antibursting reinforcement, stressing the cables using hydraulic jack, end trimming, grouting the cables, with cement slurry, mixed with admixtures with required tools, plants, and machineries, and consumables etc., including all leads, lifts, coordination, with the post- tensioning agency, preparation of drawings, obtaining approval from the Engineer-in- Charge with supply of approved grade tendons but excluding the cost of concrete, reinforcement steel, shuttering, anchors, sheathing duct etc.,

Random Rubble stone masonry, in CM (1:6) prop: (Cement: Sand) using Hard blasted Granite stones from approved quarry including cost and conveyance of all materials like Granite stones, cement, sand, water, etc., to site sales & other taxes on all materials, all operational, incidental, and labour charges such as cutting stones to required size and shape, mixing of cement mortar, constructing masonry, curing etc., complete but excluding seigniorage charges for finished item of work for foundation and basement (APSS No. 601 & 615)

Coursed Rubble stone masonry, in CM (1:6) prop: (Cement: Sand) using Hard blasted Granite stones from approved quarry including cost and conveyance of all materials like Granite stones, cement, sand, water, etc., to site sales & other taxes on all materials, all operational, incidental, and labour charges such as cutting stones to required size and shape, mixing of cement mortar, constructing masonry, curing etc., complete but excluding seigniorage charges for finished item of work for foundation and basement (APSS No. 601 & 615)

Filling with Gravel in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyence of water to the work site and all operational, incidental, labour charges, hire charges of T & P etc., completebut but excluding seignorage charges, for finished item of work. (APSS NO. 309 & 310)

Brick Masonry in superstructure with CM (1:6) prop: using second class bricks from approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes on all materials, all operational, incidental and labour charges such as mixing cement mortar, constructing masonry, scaffolding charges, lift charges, curing, etc., complete but excluding seigniorage charges for finished item of work. (APSS No. 501 & 504).-Ground Floor

First Floor Brick work

Second Floor Brick work

Third Floor Brick work

BLD-CSTN-5-11 (49): 11.5 cm wide Brick masonry for super-structure on ground floor in cm (1:3) using second class traditional size bricks including cost of all materials, labour and all operations for constructing half brick masonry, mixing cement mortar, curing etc., complete for finished item of work as directed by the Engineer in Charge-Ground Floor Balcony walls

First Floor kit, balcony walls

Second Floor Toi, balcony walls

Third Floor Toi, balcony walls

Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 2 Track–2 Panel Sliding windows with mesh duly manufactured using UPVC reinforced profiles of 91 mm x 49 mm x 2.20 mm for outer frames, 62 mm x 41 mm x 2.20 mm for sliding shutter frames capable of mounting single glazing system, structurally reinforced with 30mm 15mm x1.5mm with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm and the shutter of fly screen with fibre mesh shall be made of size 21mm x 58mm extruded uPVC window profile section of white colour having outer wall thickness of 2.2mm (± 0.3mm) provided with reinforcement of minimum 1.5mm thick G/J/U/S/O type GI section duly mitred cut and thermal welded at all corners and prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make & Glazing bead shall be coextruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.-Ground Floor

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of 100*65 MM with encapsulation of 6 MM rigid layer on all external surfaces. The door frame will have a rebate of 32MM/ 37 MM. The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to wall using Z Hand fast 300 MM long hold fast. & 30mm thick Wood Plastic Composite (WPC) Door shutter, comprising of 70% virgin polymer, 15% wood powder (fiber), and the remaining 15% additives, the door shutter shall be water resistant, fire resistant and termite resistant, with Tensile Strength not less than 170 Kgf/cm2 and the door shutters surface finished deco paint etc., complete excluding cost of hinges, latches, aldrops etc.,-Ground Floor

Ornamental ceiling plastering 12mm thick using screened sand with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)-Ground Floor

Plastering 12mm thick using screened sand with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)-Ground Floor

Plastering with CM 2 coats, 20 mm thick, base coat in CM (1:6), 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponze finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)-Ground Floor

Ornamental Design work: Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, sales & other taxes on all materials,all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, finishing, curing, etc., complete for Even Surfaces of Wall but excluding seigniorage charges for finished item of work. (APSS 901,903 & 904)

12mm thick cement plaster of mix 1:4 (1 cement : 4 coarse sand ) finishind rough with sponge including cement waterproofing coumpound of approved brand in suitable proportion as recommended by the manufacturers

Flooring with Digital / polished glazed full body porcelain Vitrified tiles of 1st quality and make as approved by Engineer-in-charge of size not less than 800 mm x 800 mm , 8mm thickness regular finish and normal colours with borders and design as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,and overheads & contractors profit complete for finished item of work.-Ground Floor

Skirting with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 800 x 800 mm and thickness between 9-11 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs for internal wall to 10 cm height with length equal to flooring stones and matching the flooring joint lines and set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work.(APSS No.701 &707) The skirting should flush on line with plastering.

DADOOING with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs for internal wall to 10 cm height with length equal to flooring stones and matching the flooring joint lines and set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work.(APSS No.701 &707) The skirting should flush on line with plastering.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 of size 300x450mm (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (Basic rate Rs. 450/Sqm)

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS :15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4Coarse sand) including pointing the joints with white cement and matching pigment etc., complete. (Basic rate Rs.450/Sqm)

Flooring with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) of regular colours (other than black) set over a base coat of CM (1:8) prop. 20mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement, sand, water, granite, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-charge, cost of overheads & contractors profit etc., complete for finished item of work . (APSS No.701 & 707)-Ground Floor

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge at Entrance lobby corridar(Basic Rate Rs. 1800/Sqm)-Ground Floor

Dadooing to walls with Polished Granite Stone slab 16-18mm thick set over a base coat of C.M (1:5) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand, water, tiles, coloured cement, overheads & contractors profit etc., to site, all labour charges for mixing of cement mortar, laying glazed tiles to level, curing etc., complete for finished item of work as directed by Engineer-in-charge.-Ground Floor

Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for Internal walls

Painting to New walls with two coats of Acrylic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer interior grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for INTERNAL Walls.(APSS No. 912) in All Floors-Ground Floor

Painting to New walls with two coats of Acrylic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer exterior grade -II making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for EXTERNAL Walls.(APSS No. 912) in All Floors-Ground Floor

TBSC-K.I-44 Providing & Fixing horizontal level suspended ceiling comprising of Armstrong GI Bioguard Clip-in Plain Tile 600x600mm (Nominal Size) tiles of 120 gsm galvanized steel as per IS 277(2003) suitable for architectural finishes in 0.5mm thickness as per in IS:513 (1994) in Global white color with concealed suspension system having a bevelled edge of 3x3mm and height of 33mm on one side and 18mm on the other side. Tiles shall be flattened by precision leveller to minimize sag to less than 1/400mm. The tiles shall have double round pip of ɸ 2mm and ɸ 6mm for secure engagement and levelling respectively, along with swing down feature and special tabs to allow removal of tile to enable plenum access. The coated surface of the tile shall exhibit anti-microbial properties (eradication and inhibition of growth) and shall achieve upto 99.99% reduction in bacterial activity as per ISO22196:2011 when tested for organisms: Escherichia Coli, Bacillus Subtilis, Pseudomonas Aeruginosa, Clostridium Perfringens, Enterococcus Faecalis, Staphylococcus Aureus, Salmonella Enterica, Streptococcus Faecalis and MRSA. The coated surface of the tile shall also exhibit fungal resistance properties and shall achieve a “Rating 0” (No fungal growth observed) as per ASTM G-21 when tested for Aspergillus Brasilliensis, Penicillium Pinophilum and Candida Albicans. The tile shall be electrostatically polyester powder coated using RoHS compliant powder having coating thickness ranging from 60-80 microns. The powder coating shall pass Salt Spray Test for 750 Hours as per ASTM B117, QUV –A Test for 1000hours as per ASTM G-154 – (Cycle – 1) and Humidity test for 1000hours as per DIN 50017. The powder coating shall have an adhesion of GT0 as per EN ISO 2409. The shade variation across batches shall be delta E<1 using Excite/BYK Gardner instrument and gloss level of 25±5% at 60˚ as per ASTM D523. The tile shall have scratch, mar & abrasive resistance properties. The tile shall have a Light Reflectance of ≥ 63% in accordance to ASTM 1477-98 and Fire Performance of class0/1 as per BS 476 Part 6 & 7 in module size of 600x600mm. SUSPENSION & INSTALLATION: Shall comprise of 3000mm long ‘C’ channels of 38H x 12W mm and 1mm thick spaced at 1200mm centre to centre securely fixed to the structural soffit using threaded rod (Approved make/Third Party Supply) connecting to Cchannel hanger of 109x18.5x16.5mm at 1200mm C/C and anchor fastener (Approvedmake/Third Party Supply). The last hanger at the end of each C-channel shall not be greater than 600mm from the adjacent wall.Use a C-channel connector of 99.5x35x 9mm for splicing together two pieces of Cchannels.4000mm DP-12 main carriers (Clipin bar) of 16W x 40H mm and 0.6mm thick made of galvanized steel of 140gsm as IS 277(2003) and shall be spaced at 600mm centre to centre in a direction perpendicular to the C-channels and secured at every intersection with C-channel using a DP-12 hanger (Clip-in bar hanger) of 54x18x20mm. Use DP-12 connector (Clip-in bar connecter) to splice two pieces of DP-12 main carriers (Clip-inbar). Tiles shall be clipped in between two DP-12 carriers (Clip-in bars) from below.Optionally - Security clip to be installed to ensure the panels are positively engaged with DP12 channel (Clip-in bar channel).Installation shall be carried out as per Armstrong recommended procedure.Perimeter to be finished using Armstrong wall angles of size 3000x19x32mm in white color secured to walls using screws at 450mm centre to centre. Cut tiles to be secured to the wall angles using a spring clamp.The Tile & Grid system used together shall carry a 10 year warranty against manufacturing defect and manufacturer shall provide a warranty certificate. The Tile & Grid shall have the manufacturers name embossed/printed on it. The supply shall be backed by a Manufacturing Test Certificate.-Third Floor( Admn office)

Construction for Road and Pathway for Madaveedhulu-Earthwork excavation for road way in soil by mechanical means by using Hydraulic excavator including cutting and pushing the earth to side of embankment upto a lead of 100 metres including trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections etc., complete for finished item of work for trench cutting as per MOR&H specification No.301 and as directed by the Engineer-in-Charge.

Carting the excavated earth in the road boundary for lead of 5 km. as per SSR rates

Construction of granular sub-base by providing well graded material / Close graded material confirming to Grading - VI of MoRT&H Table 400-1 including cost, (excluding seigniorage charges) and conveyance of all materials to work site, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with Vibratory Roller to achieve the desired density, complete for finished item of work as per Technical Specification Clause 401 MORD / MORTH and as directed by the Engineer in Charge. For Grading VI Material

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with Vibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD / MORTH.

Collection, Supply and filling of Sand from approved quarry to work site and stacking at work site to Dept. gauge for premeasurements including cost and convenyance of all material and all labour charges etc. complete as per standard specifications. Clause 305.3.9 MORD & 304 MORTH

Collection, Supply and filling of HBG 2.36 mm and below from approved quarry to work site and stacking at work site to Dept. gauge for premeasurements including cost and convenyance of all material and all labour charges etc. complete as per standard specifications. Clause 305.3.9 MORD & 304 MORTH

Supply of Hard Granite Stone to the site to the required size and shape as per the approved drawing including cost and conveyance of all materials, labour charges etc., complete for finished item of work(4'-0"x2'-0"x0'-6")

Rough Dressing for Hard granite Stone (SSR S. No. 4.710)

Three Line Palmana Dressing for Hard granite Stone Not Less than 12"x24" uniform size and thickness not less than 4". (SSR S. No. 4.440)

Labour charges for Laying & Jointing for Hard Granite (S. No. 4.470)

Providing and Laying of Interlocking Concrete Blocks for paving, of M-40 grade and thickness not less than 80 mm for Medium traffic areas conforming to IS15658:2006 in all shapes and designs as per the manufacturer's specification as per drawings and Technical Specification Clause 1504 MORD, compacted over bed of fine sand/dust, compacting and proper embedding / laying of inter locking paver blocks into the bedding layer through vibator compaction, filling the joints with river sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic etc., complete as per manufacturer's specification & direction of Engineer-in-charge with approved colour,design & pattern for the finished item of work

Supply, Installation and commissioning approved make floor mounted Close Coupled wash down EWC conforming to IS:2556 (Part 8)-2004 suit with 'P' ' trap with dual flush porcelain cistern fixed on wash down EWC with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap & 15 mm angle stop cock & 450 mm long PVC inter connection pipe wall flanges all of approved make etc. complete for finished item of work in all respects: White Colour TBSP-E.II-04. For Toilets

Supplying & Fixing Orissa Pan White glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with "P" or "S" trap Hindware/ Parryware/ Neycer - ISI Mark: 580 mm x 440 mm duly providing constructing Brick masonry seat using 2nd class bricks, CC Squatting plate in P.C.C 1:2:4, S&F PVC Low level system with internal components & short bend: 10 Litres capacity Single Flush, S&F of 15 mm brass angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded conforming to IS 8931 and S&F 15 mm nominal size PVC connection with brass union nut C.P coated including cost and conveyance of all materials and labour charges, overheads and contractor's profit etc.,. complete as per standard practice for finished item of work. For Toilets

Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader fixed with screws complete Indian make : 410 x265 x 305 mm (HS W/Parry/Neycer) conforming to IS 2556 -1995 as approved be Engineer - in - charge 12.7 mm PVC connection with brass plumber union nuts CM Coated. including 12.70 mm push cock 1st qulaity of approved make including supply & fixing 31.75 m dia PVC flexible waser pipe of 914.40 mm lenght of 1st including cost and conveyance of all materials to site labour charges etc., complete for finished item of work for all floors. For Toilets

Supplying & Fixing Indian make WHITE Flat Back Wash Hand Basin of size 550 x 400 mm with Single C.P. Pillar cock 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963- 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/Senior/ Nice/ Esso or equivalent, 15 mm brass angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded onforming to IS 8931, 15 mm nominal size PVC connection with brass union nut C.P coated, 30 mm nominal size dia PVC flexible waste pipe of 914.4 mm length of Ist quality and standard CI brackets including wooden block, including cost and conveyance of all materials, overheads and contractor's profit etc. complete for finished item of work in all respects. for Toilets

Supplying and fixing of SWR PVC pipes of 4 Kg/Sq.cm. and fixing all specials such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps with required number of Bombay nails etc with solvent jointing as per standard practice including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels . (APSS No. 1302 1319 & 1326) .75mm dia

Supplying and fixing of SWR PVC pipes of 4 Kg/Sq.cm. and fixing all specials such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps with required number of Bombay nails etc with solvent jointing as per standard practice including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels . (APSS No. 1302 1319 & 1326) 110mm dia

Supplying & fixing of 4" (101.6 mm ) multi floor trap with Jali- UPVC/SWR Pipe fittings including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work. For Toilets

S&F premium make CPVC Pipes of mm OD Pipe - SDR 13.5 including the cost of pipe, required number of connectors such as elbows, tees, couplers, connectors, solvent cement etc., and labour charges complete including cost and conveyance of all materials to site, all operational,incidental , labour charges, etc.complete for finished item of work as directed by Engineer-in-charge 28.60mm OD Pipe - SDR 13.5

S&F premium make CPVC Pipes of mm OD Pipe - SDR 13.5 including the cost of pipe, required number of connectors such as elbows, tees, couplers, connectors, solvent cement etc., and labour charges complete including cost and conveyance of all materials to site, all operational,incidental , labour charges, etc.complete for finished item of work as directed by Engineer-in-charge 34.90mm OD Pipe - SDR 13.5

S&F of Chromium plated finish brass body quarter turn Bibcock cum Health Faucet with 1m long tube and wall hook with 10 years warranty including cost and conveyance of all materials and labour charges, overheads and contractor's profit etc.,. complete for finished item of work. for Toilets

S & F 25 mm nominal size dia & 609.6 mm long aluminium anodized towel rod with brackets and aluminium screws including cost and conveyance of all materials and labour charges, overheads and contractor's profit etc.,. complete for finished item of work. for Toilets

Supplying and fixing 15 mm brass body CP finish self closing tap push type conforming to IS 1711 including cost and conveyance of all materials, labour charges etc., complete for finished item of work in all floors. For Toilets

S&F of 15 mm brass body CP finish bib tap of not less than 300 grams weight with quarter turn spindle with either internal or external threaded connection conforming to IS 8931.for Toilets

Supplying & Fixing of CP finish brass soap dish including cost and conveyance of all materials and labour charges, overheads and contractor's profit etc.,. complete for finished item of work. For Toilets

Supplying and fixing Bronze Gate/ Globe valve as per IS - 778 Class - I,Indian make heavy type as approved by the Engineer including cost and conveyance of all materials and labour charges, overheads and contractor's profit etc.,. complete for finished item of work in all floors as directed by Engineer-in-charge.. 25 mm For Toilets

Supplying and fixing Bronze Gate/ Globe valve as per IS - 778 Class - I,Indian make heavy type as approved by the Engineer including cost and conveyance of all materials and labour charges, overheads and contractor's profit etc.,. complete for finished item of work in all floors as directed by Engineer-in-charge.. 32 mm For Toilets

Supplying and fixing Bronze Gate/ Globe valve as per IS - 778 Class - I,Indian make heavy type as approved by the Engineer including cost and conveyance of all materials and labour charges, overheads and contractor's profit etc.,. complete for finished item of work in all floors as directed by Engineer-in-charge. 4mm for Toilets

Supplying & fixing 150 mm x 100 mm SWG gully traps conforming to ISI 651 & 4127 with C.I Grating & constructing Brick masonry in CM 1:6 prop. over a C.C. (1:5:10) prop. Bed 100mm thick and plastering 12mm thick in CM (1:4) prop. both inside and outside surfaces and fitted with 304.8 mm x 288.6mm (12" x 9") C.I. frame and hinged cover of standard make as directed by the Engineer-in-charge including cost and conveyance of all materials and labour charges, overheads and contractor's profit etc.,. complete as per standard practice for finished item of work (APSS No 1326). for Toilets

Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame and cover of 20 Kg. including cost and conveyance of all materials and labour charges, overheads and contractor's profit etc.,. complete for finished item of work. for Toilets

Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (exculding rock) and laying cement conrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification. For line upto SEPTIC TANK

Supplying and laying, jointing and testing SWG SP-1 pipes of ISI make conforming to ISI 651 & 4127 with air tight cement joints in cm (1½:1) prop, including excavation of trenches and socket pits in any soils (except rock requiring blasting) up to 914.4 mm (3'0") depth and refilling watering and tamping etc complete for finished item of work. 101.4 mm (4") dia

Supplying and laying, jointing and testing SWG SP-1 pipes of ISI make conforming to ISI 651 & 4127 with air tight cement joints in cm (1½:1) prop, including excavation of trenches and socket pits in any soils (except rock requiring blasting) up to 914.4 mm (3'0") depth and refilling watering and tamping etc complete for finished item of work. 152.4 mm (6") dia

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks, including cost and conveyance of all materials and labour charges, overheads and contractor's profit etc.,. complete for finished item of work. for Toilets

Providing specialized high performance acrylic polymer modified elastomeric cementitious waterproof coating to the terrace / walls / internal portion of the bathroom & toilets / internal portion of the water tanks duly cleaning of the surface from dirt, dust and other contaminations, providing and application of Two coats of High performance Acrylic polymer modified Elastomeric cementitious waterproof coating ( 1.8 Sq. Mtr. / Kg /Each Coat ) TBSC-Q.VII-04

CONDUIT- Supply and Laying of ISI 25mm outer dia heavy grade with IS:9537 part 3 regid PVC pipe concealed in Roof Slabs with all required Metallic Deep Boxes including masonary work and labour charges etc., complete.Makes : Sudhakar / Finolex / VIP /Precision .

Supply and laying of ISI 25mm outer dia medium grade with IS:9537 part 3 regid PVC pipe on surface of the wall with required saddles with PVC junction boxes and all required accessories including all labour charges etc., complete. Makes : Sudhakar / Finolex / Modi / VIP / Precision / Universal / Million Plast

Supply and laying of ISI 25mm outer dia medium grade with IS:9537 part 3 regid PVC pipe consealed in wall with all required Metallic Junction Boxes including masonary work and labour charges etc., complete for Run of mains.Makes : Sudhakar / Finolex / VIP /Precision .

Supply and fixing of Anchor fastener with fan hook/Providing MS Fan hook in slab

Wiring -Wiring with run of 3 of 1.5 Sqmm FRLSH / HFFR PVC insulated1100V grade as per IS:694 / 2010, IS 17048 specification flexible ISI mark copper cable in existing PVC conduit pipe including Supply and fixing of Jumbo Ceiling rose and 6 / 10A ISI Mark 1way Modular switch with required modular box and cover frame in existing Surface or Concealed pipe wiring,ferrules including cost and conveyance of all material and all labour charges etc., complete for Light,Fan and Exhaust fan points in N.R.B .Wire Makes: Makes : Finolex / RR kabel / Havells.Accessories Makes: Legrand Lyncus / GM Four Five / Million / Goldmedal Curve / Anchor Roma Plus / Crabtree Verona / Panasonic Vision.

Supply and fixing of ISI marked 6 / 10A 3/2pin Modular socket with shutter, 6 / 10 Amps Modular switch on 3 modular box with suitable cover frame on a common switch board including cost and conveyance of all material and all labour charges etc., complete in N.R.B. Makes : Legrand Lyncus / GM Four Five / Million / Goldmedal Curve / Anchor Roma Plus / Crabtree Verona / Panasonic Vision.

Supply and fixing of ISI mark 16A 3pin / 6A 3 Pin 1 way Modular combi socket with shutter, 16/20A Amps Modular switch, 3 Modular box with suitable cover frame and earth connections including cost and conveyance of all material and all labour charges etc., complete in N.R.B.. Makes : Legrand Lyncus / GM Four Five / Million / Goldmedal Curve / Anchor Roma Plus / Crabtree Verona / Panasonic Vision.

RSupply and fixing of 2 Nos 6 / 10A ISI mark Modular type Switch with 3Nos 6 /10A 3/2 pin wall plug socket with shutter on suitable size Modular deep box with cover frame including cost and coveyance of all material ferules and all labour charges etc., complete for Computers in N.R.B. / R.B. Makes : Legrand Lyncus / GM Four Five / Million / Goldmedal Curve / Anchor Roma Plus / Crabtree Verona / Panasonic Vision.

Supply and fixing of 2 no.s ISI Marked 10A 3/2 pin Modular socket with shutter with 2 No.s 10A 1way Modular switch and cover frame on a common switch board with Module box with connections including cost and conveyance of all materials and all labour charges etc., complete in R.B of makes : Legrand Lyncus / GM Four Five / Million / Goldmedal Curve / Anchor Roma Plus / Crabtree Verona / Panasonic Vision.

RUN OF MAINS-Supply and Run of 3 of 2.50 Sq.mm FRLSH / HFFR PVC insulated flexible ISI marked copper cable in existing pipe for run of mains inlcuding connections and all labour charges etc., complete of Copper cable Make: Finolex / RR kabel / Havells

Supply and Run of 3 of 4.00 Sq.mm FRLSH / HFFR PVC insulated flexible ISI marked copper cable in existing pipe for run of mains inlcuding connections and all labour charges etc., complete. Copper cable Make: Finolex / RR kabel / Havells

Supply and Run of 3 of 6.00 Sq.mm FRLSH / HFFR PVC insulated flexible ISI marked copper cable in existing pipe for run of mains inlcuding connections and all labour charges etc., complete. complete.Make: Finolex / RR kabel / Havells

Supply and Run of 5 of 6.00 Sq.mm FRLSH / HFFR PVC insulated flexible ISI marked copper cable in existing pipe for run of mains inlcuding connections and all labour charges etc., complete. complete.Make: Finolex / RR kabel / Havells

Supply and Run of 5 of 10.00 Sq.mm FRLSH / HFFR PVC insulated flexible ISI marked copper cable in existing pipe for run of mains inlcuding connections and all labour charges etc., complete. complete.Make: Finolex / RR kabel / Havells

Supply and Run of 2 of 1.5 Sqmm FRLSH / HFFR PVC insulated flexible ISI marked copper cable in existing pipe for Looping false ceiling fittings inlcuding connections and all labour charges etc., complete. Makes : Finolex / RR kabel / Havells.

ELECTRICAL FIXTURES-Supply and transportation and fixing of 15W +/- 10% LED back lit LED Down Light Recessed / Surface mounting round / square with housing made of Powder coated Pressure die cast aluminium housing with extended heat sink, with Protruded high efficiency diffuser, IP20, with wide operating voltage range, Power factor > 0.9, Surge protection: > 2KV, System efficacy of >100 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI >80, and THD is less than 15% etc., complete with 5 years warranty with BIS Certification.LUMINAIRE MAKE : Phillips / OSRAM / Crompton / Bajaj / Havells / Jaquar or equilent as approved by the Department

SSupply and transportation and fixing of 12W +/- 10% LED back lit LED Down Light Recessed / Surface mounting round / square with housing made of Powder coated Pressure die cast aluminium housing with extended heat sink, with Protruded high efficiency diffuser, IP20, with wide operating voltage range, Power factor > 0.9, Surge protection: > 2KV, System efficacy of >100 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI >80, and THD is less than 15% etc., complete with 5 years warranty with BIS Certification.LUMINAIRE MAKE : Phillips / OSRAM / Crompton / Bajaj / Havells / Jaquar or equilent as approved by the Department

Supply,Fixing and transportation and fixxing of 7 /11W +/-10% (>= 700 Lumens) LED Spot Light Recessed mounting with housing made of Powder coated Pressure die cast aluminium, IP20, with wide operating voltage range, Power factor > 0.9, Surge protection: > 2KV, System efficacy of >100 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI >80, and THD is less than 15% etc., complete with 5 years warranty with BIS Certification. LUMINAIRE MAKE : Phillips / OSRAM /Crompton/ Wipro LED MAKE : PHILIPS LUMILEDS / CREE /NICHIA / OSRAM / SAMSUNG / LG LEDs.

Supply, transportation and Fixing of 22W, +/ 10% , >/ 2300 lumens, 1200mm length LED light housing made with alluminium anodised body, wide operating voltage with PF≥0.9, Surge protection: > 2KV, THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department as per IS, minimum CRI≥80 etc., complete with 5 years warranty with BIS Certification with BIS Certification. LUMINAIRE MAKE : Phillips / OSRAM/ Wipro /Crompton / Bajaj / Havells / Jaquar or equilent as approved by the Department

Supply, Transportation and fixing of energy efficient decorative fan, 1400 mm sweep, aluminium body, consuming 35 W, BEE 5 star rated, ceiling fan with Brush Less Direct Current(BLDC)motor, class of insulation: B, 3 no's blades, 30 cm long down rod, 2 no's canopies, shackle kit, copper winding, PowerFactor greater than 0.90, Service Value (CMM/W) greater than 7.8, Air delivery minimum 270 CMM, 275 RPM (tolerance as per IS:374-2019), THD less than 10%, remote or compatible to electronic step type regulator unit for speed control and all remaining accessories including safety pin, nut bolts,washers, temperature rise = 75°C (max), insulation resistance more than 2 mega ohm, suitable for 230V, 50 HZ, single phase AC supply, earthing etc., complete. Makes : Atomberg (Efficio + ) / Havells / Orient / Crompton as approved by the Department

Supply and fixing of Two modular Stepped electronic regulator with connections and Labour charges etc complete.Legrand Lyncus / GM Four Five / Million / Goldmedal Curve / Anchor Roma Plus / Crabtree Verona / Panasonic Vision.

Supply, Transportation and Fixing of 8" (200mm) Ventilating exhaust fan with shutters etc complete Makes : Crompton / Havells Ventilair / Orient / with all labour charges etc., complete as directed at site.

Supply, Transportation and Fixing of 12" (300mm+/-5%)) Light duty exhaust fan with metallic blades with all labour charges etc., complete as directed at site.Makes : Crompton / Havells Ventilair / Orient

Supply ,Fixing and transportation of 30 W +/-10% (>=3000 Lumens) LED Street light Body made of high grade pressure die – cast Aluminium alloy with corrosion resistant powder coat, having protective toughened glass cover / temperature protective custom molded polycarbonate diffuser, Thermal shock and impact resistant IK07 fixed to the housing by SS screws Suitable lense on LEDs, Less Glare, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66) protected, wide operating voltage range, P.F > 0.90, System having efficacy >120 lumens / watt, with Ingress protection IP66, BIS approved Potted driver, Driver surge protection >10KV, THD<15%, CCT: 3000- 6500K as desired by the department and as per IS, CRI>70, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete with BIS certification with 5 years warranty. The contractor has to furnish the manufacturer warranty letter, LM 79 and LM 80 certificates.

Supply of 3 Core 2.5 Sqmm Flat Copper cable as per IS 694:1990 for Submersible Motors of makes Polycab / GM / Million / V-Guard / Gold Medal /RPG /Havells/ Finolex/ RR cable.

DISTRIBUTION BOARDS-Supply and fixing TPN Distribution board with IP-42 protection (Metal Door) suitable for 3 phase ELCB / RCCB / FP Isolator as incomer and 10kA SP MCBs as outing going including internal connection and labour charges for surface / flush mounting etc., complete.4.4.4 4way TPN, D.B with IP-42 Protection (MD) suitable for 3 phase ELCB / RCCB/ FP Isolator as incommer. (eACH fLOOR)

Supply and fixing TPN - Vertical type Distribution board with IP - 42 Protection (Metal Door) suitable for 3 phase ELCB / RCCB / FP Isolator as incomer and 10 kA TP / SP MCBs as outing going including internal connection and labour charges for surface / flush mounting etc., complete. 4.4.6B Incomer : 80A FP Isolator/ ELCB / RCCB Outgoing : 32A TP MCBs 4 Nos and 6-32A SP MCBs 12 Nos

Supply and fixing of Electronic Musical Bell including giving connections, cost of all accessories and labour charges etc., complete.Makes :GM / Million / Gold Medal / Anchor / Great white.

NETWORKING AND LOW VOLTAGE SYSTEM-Supply and Run of LAN Cable cat - 6 UTP cable of makes D Link / AMP / Molex / Legrand / Krone / Finolex / Polycab in existing pipe inlcuding all labour charges etc., complete as desired by the department

Supply and fixing of Cat 6 RJ-45 information outlets including duel face plate of makes D Link / AMP / Molex / Legrand / Krone on required size Modular Box with cover frame with connections including cost and conveyance of all material and all labour charges etc., complete in N.R.B.

Supply and run of 2 pair telephone cable 0.5mm copper, in the existing PVC pipe including all labour charges etc complete.Makes : Finolex / Delton / Surabi / Polycab

Supply and fixing of Modular socket type Telephone jack with Connector on required size Modular Box with cover frame with connections including cost and conveyance of all material and all labour charges etc., complete in N.R.B. Makes : Makes : Legrand Lyncus / GM Four Five / Million / Goldmedal Curve / Anchor Roma Plus / Crabtree Verona / Panasonic Vision.

Supply and fixing of 7 feet length moulded patch cord including accessories and all labour charges etc complete. Makes : D Link / AMP / Molex / Legrand / Krone.

Supply and fixing of 3 feet length moulded patch cord including accessories and all labour charges etc complete.Makes : Digisol / TP Link / D link. /Legrand.

Supply of 24 Port 10 / 100 / 1000 Gigabit Unmanageable Ethernet switch Makes : TP Link / D link / Netfox

Supply of unloaded 24 port patch panel with IOseparate. Makes : D Link / AMP / Molex / Legrand / Krone.

Supply and installation of 600 mm width x 500 mm depth UL certified 9U wall mounting network rack with sheet steel revited metal frame,top and bottom cover with brush cable entry, confirming to following standards IEC 60529,EN 60529 ( IP 20), IEC 62262 EN 62622 (IK 08) , DIN 41494, EIA 310, IEC 60927 including all accessories like horizontal PDU, metal cable manager, hardware packet and the cantilever shelf etc., complete Makes : Vallrack (Legrand) / Netrack.

IP Based digtal Telephone (EPABX) system -----complied with following specifications: > IP @ Core, PCM/TDM, Non blocking, > Must Support PRI, E1, Analog Junctions > Must Support PC Console, > Must support Mobile SIP (Android and I.O.S) > Must support Voice Mail > Must support Card based GSM > Inbuilt Call Details Software with search engine software > 4 Analog Trunks > 6 Digital Extensions > 32 Analog Extensions > 1 Digital Key Phone with minimum 16 Keys (Must work only on 2 wires) > Expandable to 64 Analog Extensions or more Makes: NEC / Alcatel

Supply of Digital Key Telephone with 2 line display, 10 programmable keys, handsfree dialing. Makes:BEC/Alcatel

Supply of 20 Pair Telephone distribution box with back mount frame, krone connector, powder coated metal body with lock and key arrangement. Makes:BEC/Alcatel

EARTHING-Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe gig earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)

Supply and Run of No.8 SWG G.I wire including cost of all accessories and labour charges etc., complete. (0.104Kgs/1Mtr)

Providing independent earthing by exacavating a pit to a depth of 2.25Mtr in all soils as per size specified in the data for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 19mm dia 'B' Class G.I Pipe of 2.5Mtr lengthwith funnel as per National Electric Code and earth connection from electrode GI strip of 40mm x 5mm x 200mm length to be bolted with nut bolts to G.I.pipe including 25mm x 3mm copper strip of 6Mtrs length connected from plate to GI strip including filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe and providing CC / Brick massonry chamber 450mmX450mmX400mm and covered with R.C.C. Slab including all accessories and labour charges etc complete as per IS specification 732/1982 (Part II).

Supply and Run of 32mm x 6mm Copper Strip including cost of all accessories and labour charges etc., complete.

Supply and Run of 25mm x 6mm G.I Strip including cost of all accessories and labour charges etc., complete.

U.G CABLES-Supply and laying of 95 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I).Makes : Torrent / Unicab / Universal /Polycab / Havells /

Supply and Laying of 25 Sqmm 4 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098(Part- I)..Makes : Torrent / Unicab / Universal /Polycab / Havells / (For Outdoor A.C units VTPN to Pannel)

Labour charges for run of U.G cable on wall / existing pipe with necessary fixing arrangments such as saddles, clamps,wooden separators etc., comkplete (as directed by departmental official).

Earth work excavation of Trench in hard ground soil and Sand filling shall be provided at the bottom of trench before laying the cable and laying of U.G cables up to 95 sqmm covering the cable with back filling of Trench duly providing route indicator embedded in C.C including cost and conveyance of materials and labour charges etc., complete.

Supply and fixing of heavy duty long barrel alluminium lugs confirming to I.S specifications suitable for 95 sqmm cable etc complete with nuts, bolts and washers. Makes: DMI / Jainson / Dowels or equivalent make as approved by the department

Supply and fixing of heavy duty type single compression brass cable glands duly nickel plated complete with brass checknut, outer sheath sealing rubber ring and washers suitable for 3.5 core 25 Sqmm XLPE insulated armoured cable, including all labour charges and miscellaneous items etc complete. Makes: SMI / Commet / Dowels.

Supply and fixing of heavy duty long barrel alluminium lugs confirming to I.S specifications suitable for 25 sqmm cable etc complete with nuts, bolts and washers.

supply and fixing of 10.0 Sqmm 4 Core PVC / XLPE Insulated,Flexible Armouring Flexible Copper cable as per IS 7098 / Part-I / 1988 including all transportation charges etc complete. Makes : Finolex / RR kabel / Havells for VRV Units

PANEL BOARD-Supply, Fabrication,Installation, Testing and Commissioning of outdoor type cubical panel board free standing Floor mounted made out of 14 guage CRCA sheet for frame work and 16 guage CRCA sheet for partitions and other after 7 tank process and painting with powder coating. The panel shall consists of suitable rating Aluminium busbar with phases and neutral of equal size( with rating of 0.8 A / Sqmm ) supported with DMC /SMC barriers and colour coded with heat shrinkable sleeves. The metering shall be provided as specified. the panel shall have short circuit with stand capacity of minimum 50 KA and consist of switch gear as mentioned below. The panel shall be got manufactured from the manufacturers with CPRI Test certificate only. The control wiring shall be done with 650V grade copper conductor with 1.5sqmm block/grey and 2.5Sqmm for CTS and Volt meter respectively with required ferrules marked with corespond with pannel wiring, all wires shall be routed proper way and neat look.The panel shall be mounting on U channels including supply and fixing the same with all labour charges

"Incoming 1 : Supply of 250A 4 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 35 KA with thermal magnetic release Panel Mounted of makes Legrand/L&T Schneider / Siemens - 2No.(1No.EB Incomer & 1Nos DG incomer) Supply of 250A 4 Pole Change Over Switch on Load with open Execution.Makes : Socomec / L & T Outgoings: Supply of 125A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted of makes Legrand. - 3 nos. Supply of 40-63A 10KA TP MCB, C/D Curve ISI Mark.Makes : Legrand-DX3 / Schneider-Acti9.-6 no Supply of 6-32A 10KA TP MCB, C/D Curve ISI Mark.Makes : Legrand-DX3 / Schneider-Acti9.-3 no Supply of 6-32A 10KA SP MCB, C/D Curve ISI Mark. Makes : Legrand-DX3 / Schneider-Acti9.6 no 0-250A Digital Ammeter - 1 No 0-500A Digital Voltmeter - 1 No Current Transformers-3 Nos Selecter switch- 2 No Indication lamps-3 Nos" Supply, Transportation and Installation of ---------- hot dip GI perforated cable tray without cover along with coupler plates, T's, Bends, Reducers, Anchor bolts, nuts, washers and slotted channels / Angle Iron Channels etc complete and the tray should be fitted on the wall / Ceiling etc. complete for finished item of work. Makes: DEC / MNR / Aparna / H FAB or equivalent 300mm x 50mm x 2mm thick

Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II).

Providing independent earthing by exacavating a pit to a depth of 2.25Mtr in all soils as per size specified in the data for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 19mm dia 'B' Class G.I Pipe of 2.5Mtr lengthwith funnel as per National Electric Code and earth connection from electrode GI strip of 40mm x 5mm x 200mm length to be bolted with nut bolts to G.I.pipe including 25mm x 3mm copper strip of 6Mtrs length connected from plate to GI strip including filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe and providing CC / Brick massonry chamber 450mmX 450mmX 400mm and covered with R.C.C. Slab including all accessories and labour charges etc complete as per IS specification 732/1982 (Part II).

Supply and Run of 32mm x 6mm Copper Strip including cost of all accessories and labour charges etc., complete.

Supply and Run of 25mm x 6mm G.I Strip including cost of all accessories and labour charges etc., complete.

Supply and laying of 95 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I).Makes : Torrent / Unicab / Universal /Polycab / Havells /

Earth work excavation of Trench in hard ground soil and Sand filling shall be provided at the bottom of trench before laying the cable and laying of U.G cables 95 sqmm covering the cable with back filling of Trench duly providing route indicator embedded in C.C including cost and conveyance of materials and labour charges etc., complete.

Supply and fixing of heavy duty long barrel alluminium lugs confirming to I.S specifications suitable for 95 sqmm cable etc complete with nuts, bolts and washers.Makes: DMI / Jainson / Dowels or equivalent make as approved by the department

GYSER-Supplying, installation,testing and comiisioning of solar hot water heater comprising of solar FLAT Plate Collector(FPC) of size 2120x1040x100mm or equivalent size and stainless steel hot water storage tank with stainless steel heat exchnager absorber made of copper sheet and copper tibe of following capacity aluminium box collector with appropriate capacity electrical back up arrangement exckuding inlet aand outlet pipes.SS Model with 100mm thick of 48Kg/M3 dc Rock wool insulation with 22 SWG Aluminium cladding - 100litre Make : Racold / Solarizer / V-Guard

KONE LIFTS 2NOS-Supply, transportation, installation, testing and commissioning of _____ passenger / Goods Gearless & Machine Room less elevator with following specifications with connected minor civil works required for installation of Lift including all accessories, scoffolding, requried channels, loading and unloading of materials etc, including comprehensive maintenance of lifts during the defect liability period. Makes: Schindler / Kone / OTIS / Mitsubishi or equivalent Specifications: a)Type : Machine room less b)Pit Depth :1500 mm or as per NBC c) Minimum Floor to Floor Height (Required) : As per Standard d)Travel height : 3.6 to 4.0mtrs.e)Head room Height : 4.5mtrs.f)Lintel Height (Required) : 2240mm from finished floor level +/- 10%.g)Number of persons : --- P h)Rated Load : --- Kgs. i)Number of Stops : ---.j)Number of Access sides : 1.k)Floor Designations : G, 1, 2,3,4. l)Drive Sytem : Alternating current, Voltage Frequency Drive (ACVF). m)Type of Controller : Fully collective control - Simplex / Duplex as per the site condition. n)Speed of Travel : ...... m/s o)Car size : As per Standard p)Door width : 800/ 900/1000mm or As per Standard q)Door Height : 2000 mm or as per standard r)Rated output motor : as per standard s)Car Design : Car walls finish in Stainless stell hairline finish LED spot in ceiling. t)Car Doors : stainless steel hairline finish. Granite Flooring finish in Black sea. Deco ceiling finish in stainless steel Hairline. Full Height mirror on rear car panel. u)Car Operating Panel : Mechanical push button.Door open/close and alarm buttons / Touch panel or equivalent, Visual call confirmation, Car position Indicator, Pre-announcing arrows for collective controls, 16 Segment displayv)Landing Doors : Fully automatic landing doors with stainless steel hairline finish. Center Opening or Side Opening as per the site condition w)Special Features Closed loop control system Self Diagnostic control Overload detection Automatic evacuation to nearest floor(ARD) Light curtain on car entrance Alarm Horn Fire Switch Handrail in stainless steel finish on rear wall Auto Fan off Auto light off Intercom-3way.

Generator .ELEC- 12.2.1 Supply, Transportation, erection and commissioning (Excluding Foundation) of 3 Phase, 415, 50Hz, water cooled multi cylinder diesel generator set with alternator of - - - KVA/ - - - - - KW out put continuous rating directly coupled Engine, Alternator and radiator with guard and mounted on a common base frame of Robust construction and complete with AMF control panelhaving IP-52 protection, anti vibration mounts of reputed make, Acoustic Enclosure as per CPCB norms IV, sound absorbing material to restrict sound level up to 75 dB up to 1 mtr distance and etc as per the following specifications mentioned. A. Alternator : Kirloskar / Stamford /Crompton Greaves / Leroy Somer make. The alternator of the output rating shall be 3 Phase, 415V, 50Hz, Ac , 0.8 P.F. lagging at 1500 RPM. The alternator is self excited, self regulated, and shall confirm to IS: 13364 of 1992 with regulation of +5% from no load to full load. degree of protections shall be IP21. B.Diesel Engine : Kirloskar / Cummins / Mahindra & Mahindra / Greaves Cotton Diesel Engine start, developing suitable --- ----------- BHP output at 1500 RPM with mechanical / electronic governing so as to enable the alternator to give - - - - -KVA continuous output at 0.8 P.F. lagging at NTP conditions. The diesel engine shall be capable of providing 10% O/L for 1 Hr for every 11 Hrs of continuous running at full load. The engine with 1st filling of oil and Diesel etc. 01. Exhaust pipe of required size as per the standards. 02. Diesel tank suitable for 8 to 12 Hours running capacity. 03. Residential Silencer. 04. SMF Batteries with leads as per the Manufacturer standards C. AMF Control Panel:- AMF control panel shall be fabricated with 16SWG CRCA sheet shall be totally enclosed with dust and Vermin proof, floor mounted / wall mounted type and shall be comprising the following.01. Voltmeter with selector switch.02. 4 Pole MCCB incomer of ----------A rating of Schenieder / LK make for EB and DG . 03. Ammeter with selector switch with CTs. 04. PF Meter and frequency Meter. 05. Indicator lamps (set Run, Load ON) with fuses. 06. KWH Meter of required rating. 07. Set of control fuses and current transformer. 08. Input Terminal board and output Terminal Board. 09. Battery charger with transformer rectifier unit. 10. Alternator supply air break contactor of LK make.11. Main supply air break contactor of LK make. 12. Audio Visual announciation .13. Main supply voltage set of control relays and timers with one mode selector switch, set of push buttons. 14.Control cable up to 15 Mtrs 2.5Sqmm 6 Core . 58.5 KVA, 3 Phase, 415, 50 Hz, …….BHP, water cooled multy cylinder diesel generator set with alternator of 58.5 KVA output continious rating at 0.8 p.f. Batteries.

500 KVA, 3 Phase, 415, 50 Hz, not less than ….. BHP, water cooled multy cylinder diesel generator set with alternator of 500 KVA output continious rating at 0.8 p.f. Batteries.

Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe gig earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)

Providing independent earthing by exacavating a pit to a depth of 2.25Mtr in all soils as per size specified in the data for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 19mm dia 'B' Class G.I Pipe of 2.5Mtr lengthwith funnel as per National Electric Code and earth connection from electrode GI strip of 40mm x 5mm x 200mm length to be bolted with nut bolts to G.I.pipe including 25mm x 3mm copper strip of 6Mtrs length connected from plate to GI strip including filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe and providing CC / Brick massonry chamber 450mmX450mmX400mm and covered with R.C.C. Slab including all accessories and labour charges etc complete as per IS specification 732/1982 (Part II).

Supply and Run of 32mm x 6mm Copper Strip including cost of all accessories and labour charges etc., complete

Supply and Run of 25mm x 6mm G.I Strip including cost of all accessories and labour charges etc., complete.

Supply and laying of 95 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I).Makes : Torrent / Unicab / Universal /Polycab / Havells /

Earth work excavation of Trench in hard ground soil and Sand filling shall be provided at the bottom of trench before laying the cable and laying of U.G cables 95 sqmm covering the cable with back filling of Trench duly providing route indicator embedded in C.C including cost and conveyance of materials and labour charges etc., complete.

Supply and fixing of heavy duty long barrel alluminium lugs confirming to I.S specifications suitable for 95 sqmm cable etc complete with nuts, bolts and washers.Makes: DMI / Jainson / Dowels or equivalent make as approved by the department

Addressable fire alarm system ; Supply, Installation, testing and commissioning of EN54-2 Listed and LPCB approved 10 loop micro processor based analog addressable fire control panel expandable by minimum 2 additional loops with minimum 80 character LCD display 4 access levels 1000 events, historical logging, flash E-PROM, 240 volts A C Power supply, automatic battery charger, 24V SLA batteries suitable for operating the entire system including tack back units and the hooters/strobes for a minimum of 4 hours in battery condition the panel shall have suitable power amplifiers for hooter / strobes the panel shall be capable beeing integrated with the BMS system and shall include cost of supply, installation of any additional modules or interfaces required for the same. The panel shall be completed as per the specification and as required for fixing of above Micro processor based Fire Alarm control panel with zonal indictions and battery back up as per detailed specifications.ELEC-11.2.2 Makes: Siemens / Morley IAS / Bosch / Ravel /Honeywell/Cooper Appolo / Kartar

Supply, Installation, testing and commissioning of UL approved intellegent analogue addressable Repeater panel including the cost of mounting accessories complete as per specification as required.Makes: Siemens / Morley IAS / Bosch / Ravel / Honeywell/cooper / Appolo / KartarELEC- 11.2.12

Supply and fixing of addressable wall mounting strobes cum hooters including the cost of mounting accessories complete as per specifications and as required including testing and commissioning. Makes: Siemens / Morley IAS / Bosch / Ravel /Honeywell/cooper / Appolo / KartaELEC- 11.2.13

Supply and installation of addressable analogue manual call point with resetable flexible element to initiate alaram including the cost of mounting accessories etc. complete. Makes: Siemens / Morley IAS / Bosch / Ravel / Honeywell/cooper / Appolo / KartarELEC- 11.2.14

Supply and instllation of UL approved intellegent analogue addressable photo electric smoke detector including cost of base plate etc., complete as per specification with required fittings and accessories. Siemens / Morley IAS / Bosch / Ravel /Honeywell/cooper / Appolo / Kartar ELEC- 11.2.15

Supply and installation of UL approved intellegent analogue addressable rate of rise cum fixed temparature heat detectors including the cost of base plate. 75mm dia MS outlet box for fixing of the detector base, mounting accessories etc., complete as per specifications and as required.Makes: Siemens / Morley IAS / Bosch / Ravel / Honeywell/Cooper / Appolo / KartarELEC- 11.2.16

Supply and installation of UL approved intellegent analogue addressable multi criterion detectors below false ceiling/on ceiling including the cost of base plate. 75mm dia MS outlet box for fixing of the detector base, mounting accessories etc., complete as per specifications and as required. Makes: Siemens / Morley IAS / Bosch / Ravel / Honeywell/Cooper / Appolo / KartarELEC- 11.2.17

Supply and Installation of UL approved intellegent analogue addressable Control Modules including the cost of mounting accessories complete as per specifications and as required. Makes: Siemens / Morley IAS / Bosch / Ravel / Honeywell/cooper / Appolo / KartarELEC- 11.2.18

Supply and Installation of UL approved intellegent analogue addressable monitor modules including the cost of mounting accessories complete as per specifications and as required. Makes: Siemens / Morley IAS / Bosch / Ravel / Honeywell/cooper / Appolo / Kartar ELEC- 11.2.19

Supply and Installation of UL approved intellegent analogue addressable fault isolator modules including the cost of mounting accessories complete as per specifications and complete as required. Makes: Siemens / Morley IAS / Bosch / Ravel /Honeywell/Cooper / Appolo / KartarELEC- 11.2.20

Fire Extinguishers:Supply and fixing of ABC Powder type fire extinguisher of 6 Kgs. Capacity, with initial filling in brand new cylinder with powder coated finish, fitted with Gun metal union, high pressure gas cartridge, discharge hose, wall mounting bracket / stand etc. complete, confirming to IS:15683(For car parking)ELEC-11.4.1

Supply and fixing of Co2 4.5 Kg capacity type extinguisher with initial filling in brand new cylinder with powder coated finish, fitted with Gun metal union, high pressure, discharge hose, wall mounting bracket / stand etc. complete, confirming to IS:15683. For electrical room ELEC-11.4.2

Supply and fixing of Co2 2 Kg capacity type extinguisher with initial filling in brand new cylinder with powder coated finish, fitted with Gun metal union, high pressure gas cartridge, discharge hose, wall mounting bracket / stand etc. complete, confirming to IS:15683. Inside Lift Machine room ELEC-11.4.3

Supply and fixing of Ceiling mounted type clean agent automatic fire extinguisher of capacity 05 kgs fitted with an automatic sprinkler valve & that shall be calibrated to discharge at an ambient temperature of 68°C. Extinguisher shall be manufactured strictly as per IS standards. Quoted rate shall include necessary supports suitable for ceiling mountingELEC-11.4.4

Supply and fixing of Water Mist type fire extinguisher 9 liters. Capacity, with initial filling in brand new cylinder with powder coated finish, fitted with Gun metal union, high pressure gas cartridge, discharge hose, wall mounting bracket / stand etc. complete, confirming to IS:15683. (Provided near Stair case landing)ELEC-11.4.5

Fire Hydrant and sprinkler system; Supply, Transportation, installation, testing and commissioning of electric driven main fire pump suitable for automatic operation and consisting of following complete in all respect as required a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 Kg /sq.cm. at highest and farthest outlet at specified flow of ------- lpm at ------ Mtr. head conforming to IS 1520 b) Suitable HP SQ cage induction motor, TEFC, synchronous speed 2900 RPM, suitable for operation on 415Volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325 c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required. d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Pumps: Kirloskar / Mather&Platt. Makes of Motors: Siemens/ ABB/ Kirloskar. 1620 LPM, 70 Mtr Head

Control panels; Fabrication, supply,Transportation, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of cable alley, interconnection with suitable sizecopper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete with following incoming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply. Makes of MCCBs : LK (L & T) / Siemens / Legrand / Schneider / ABB / Hager Makes of Meters : Schneider (Conzerve) /LK (L & T) / Elmeasure / Siemens INCOMING : 250A, 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0-500V with selector switch Digital Ammeter (0-250 A) with selector swtich & CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 300A OUTGOING : Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps. MAIN FIRE PUMP 125 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 60 HP pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation selector switch for local / remote, auto / manual /OFF operation. JOCKEY PUMP 63 A, 50kA TPN MCCB, Ics=100% Icu, with suitable protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local / remote, auto / manual / OFF operation. DIESEL ENGINE CONTROL Control for diesel engine comprising - Automatic/Manual selctor switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure,High Water Temp and Engine on indicationWater Temp and Engine on indication. Batterycharger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0 - 20 A DC Ammeter, All standard relays and accessories for automatic operation of diesel engine System Controller.

Fire survival cables; Supply of XLPE insulated 1.5 Sqmm Armoured 2 core FRLSZH fire alarm cable (RED) and fire survival cable confirming to IS 7098 (part1) 1998, 1100V grade ----- Core ISI marked with standard solid conductor ELEC-11.7.15;2 core

Supply, Transportation, laying, testing & commissioning of 'B' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required Makes : Jindal Hissar / Tata pipes .200 mm dia

Supply and fixing single headed internal /External hydrant valve with instantaneous Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blankStainless Steel cap and chain as required : Make: Mini Max / Safex / Newage / Winco /Newtech / Padmini / Kartar

Supply, testing and commissioning of butterfly valve PN 1.6, with Bronze / Gun metal seat duly ISI marked complete with Nuts, Bolts, Washers, gaskets, conforming to IS 13095 of following sizes as required. Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto / Intervalve / Honeywell / KartarELEC- 11.7.22;150 mm dia

Supply, installation, testing and commissioning of C.I. non - return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc as required Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto / Intervalve / Honeywell./ Kartar ;150 mm dia

Supply, installation, testing and commissioning of brass / gun metal chrome finished ball valve including cost of all materials, labour charges with required machinary etc., complete. Of following sizes as required. Make: Newage / Winco / Padmini / Safex.ELEC- 11.7.26; 25 mm dia GM Gate Valve

Supply, installation, testing and commissioning of C.I. flanged " Y " type strainer with SS Mesh, suitable flanges, nuts, bolts, gaskets etc., complete.(PN 10 Rating) ;150 mm dia

Supply and fixing 63mm dia, 15 mtr long RRL hose pipe with 63mm dia Male and Female SS couplings duly binded with GI wire, rivets including SS couplings etc conforming to IS 636 (Type -A) as required. Make: Mini Max / Safex / Newage / Winco /Newtech/ Padmini / Kartar ELEC- 11.7.27

Supply and fixing 63mm dia, 15 mtr long CP hose pipe with 63mm dia Male and Female SS couplings duly binded with GI wire, rivets including SS couplingsetc conforming to IS 636 (Type -A) as required.Make: Mini Max / Safex / Newage / Winco /Newtech / Padmini. / KartarELEC- 11.7.28

Supply and fixing First - Aid Hose Reel with MS construction spray painted in Post office Red, Conforming to IS 884 with upto date amendments, complete with the following as required. a) 36.6 Mtr Long 20mm (Nominal internal) dia water hose Thermoplastic / Textile reinforced /Rubber braided / Polypropylene Type - 2 as per IS:12585 Make: Eversafe / Newage / Newtech / SRI b) 20mm (Nominal internal) dia gun metal globe valve and nozzle. Make: Newage / Winco / Padmini / Newtech / Safex. c) Drum and brackets for fixing the equipments on wall. d) Connections from riser with 25mm dia stopvalve (gun metal) & MS pipe.

Supply and fixing 63mm dia Gun metal branchpipe with 20mm (Nominal internal diameter) size including SS nozzle conforming to IS903, suitable for instantaneous connection to interconnect hose pipe coupling as required. Make : Mini Max / Safex/ Newage / Winco /Newtech / Padmini./ Kartar

Supplyand fixing of hose cabinet of size 750mm X 600mm x 250mm made of No 16 gauge SWG CRCA sheet with 6mm thick glazed glass door including necessary locking arrangement suitable to accommodate 2 Nos 15 mtr long Hose pipe, 1 No branch pipe, mounted on wall OR raised brick platform and duly painted with Post office red externally and white internally with synthetic enamel paint complete in all respect, for external hydrant as required. Make: Mini Max / Safex / Newage / Winco / Newtech / Padmini / Kartar ELEC- 11.7.30

Supply and fixing ----------- inlet couplings complete with cap and chain as required for 150mm dia MS pipe connection, conforming to IS 904 as required. Make: Mini Max / Safex / Newage / Winco /Newtech / Padmini / KartarELEC- 11.7.32 ;4Way Fire brigade connection cast iron body with 4 Nos Gun metal male instantaneous

Supply and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25mm dia Gun metal wheel valve, with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required.ELEC- 11.7.33

Supply, installation, testing and commissioning of conventional Sprinkler quartzoid bulb (Standard Response) type with 15mm screwed end connection of 68ºC temperature rating, K 80 and Orifice shall not be less than 6 mm. Sprinklers shall be UL listed / FM approved with Chrome finishing. Makes: SAFEX / HD / TYCO / VIKING / NEWAGE / Newtech / SHARP / Kartar ELEC-11.7.34

Supply, installation, testing & commissioning of stainless steel braided sprinkler flexible pipe (hose) for dropping sprinklers below false ceiling, pipe shall be 12 bar pressure rating and 700-800mm long 25 mm dia with union / reducer collar, clamps etc., as required (Only for common area lobby) UL Listed Makes: SAFEX / HD / TYCO / VIKING /NEWAGE / SHARP / Kartar

Supply, installation, testing and commissioning of Pressure gauges ( PN 20 bar) of suitable range for pump sets with Ball valves, Fittings like unions / colours / reducers etc.(Glistering filled)ELEC- 11.7.40

Supply, installation, testing and commissioning of flow switch on sprinkler distribution header on each floor and shall be connected to fire alarm panel through cable. Cable shall be measured separately. Makes : System Sensor / SwitzerELEC- 11.7.38

Supply, installation, testing and commissioning of Pressure Switch (PN 20 bar) of suitable range for pump sets with Ball valves, fittings like unions / colours / reducers etc., Make : Danfoss / Indfoss

Supply, installation, testing and commissioning of approved make 25 mm dia. With automatic air release valve with unions etc. complete. (PN 16) ( Spring loaded type)

Supply and fixing of Escape signage boards in Rigid Photo luminecent based glow in Dark rigid sheet with high intensity luminous properties with specificaiton of Cease Fire or its equivalent make Model-1ES01

HVAC SYSTEM ;- VARIABLE REFRIGERANT FLOW SYSTEM - ODU-Supply, Transportation, Installation, Testing and Commissioning of 24 HP Variable refrigerant Volume (VRV) / variable refrigerant flow (VRF) Air Cooled Outdoor Units (ODU) suitable for cooling and heating having 100% thermetically sealed inverter type compressor and minimum 2 compressors along with 2 condensing fans above 14 / 18 HP Modules, Microprocessor based controller, Side / Top Discharge type condensing units with R-410 A refrigerant, vibration isolators with suitable foundation etc., complete as required. The outdoor unit shall deliver the rated capacity at AHRI conditions and work even at 50 ° centigrade ambient temperature without tripping.The unit shall be suitable to work on 430 V +/- 10%, 3 phase 50 Hz AC Power supply etc., complete finished item of work including comprehensive maintenance of units during the defect liability period. Makes: Blue star / Hitachi / Daikin/ Mitsubishi Electric or equivalent models approved by the Engineer-in-Charge. The system shall be suitable for variable refrigerant volume / flow air conditioner consisting of one outdoor unit and multiple indoor units. The outdoor units shall be of Inverter type capable of changing the rotating speed to follow variations in cooling load and shall be suitable for connecting multiple indoor units of different capacities & types as per the drawing and project requirements.-The system is inclusive of Outdoor units, Indoor units, refrigerant pipes, Refnet connections, refrigerant gas,Electrical Cables, electrical panel with necessary starter,ELCBs, relays, controls, etc., insulation, supports, vibration isolation pads etc and as per the tender specifications. The cost shall inclusive of all these items and necessary refrigerant charge.-The system shall be provisioned such that, even if the power supply to any Indoor unit is cut-off, the rest of the system shall be able to continue to function normally.-24HP

VRV HI WALL INDOOR TYPE-Supply and installation of ..... TR VRV high wall mounted type indoor unit operating on single phaes 220V, 50Hz AC supply comprising of prefilter fan, density & population sensor, section, with low noise fan, multispeed motor coil section with DX coil, outer cabinet, drain water lift- up mechanism, insulation, including all types of Refrigerant pipe joint kit connections, fresh air intake, with cordless remote controller etc., including comprehensive maintenance of units during the defect liability period. Makes: Blue star / Hitachi / Daikin/ MitsubishiElectric or equivalent models approved by theEngineer-in-Charge.ELEC-6.9.4-1 TR, capacity HI WALL UNIT-Supply

1.65 TR , capacity HI WALL UNIT-Supply

REFRIGERANT PIPING FOR VRF SYSTEM-Supply, installation, testing and commisioning of 2 runs of following sizes of all refregerent liquid and gas piping using eddy current free hard copper pipes and fittings like elbows, couplers, T - joints, Brass fittings "U" loops, expantion loops, refnet joints etc, for VRV /VRF System. Insulation of pipes using 19mm for supply and 13mm returns thick elastometric closed cell nitrile rubber insulation materials having class "O" for fire properties structural clamps with hard PVC pipes sleevss under the clamp to protect insulation at supports tagging to enable tracing connectivity to respective units as per drawings to be generated by the agency submission of test reports in approved format forms a part of this item scope, making up of any leakages including supply, labour, consumables, refrigerant top up and incidental expenses.Makes : Mandev / or Equivalent as approvedby the department ELEC-6.10.5 a)12.7 X 28.6mm b)15.9 X 28.6mm c)19.1 X 34.9mm d)19.1 X 41.3mm e)22.2 X 41.3mm-All dia length

Supply instalation and testing commissioning of of Refnet Joints

DRAIN PIPING-Supply, installation, testing and commissioning of the drain pipe with CPVC pipes with all accessories and insulation with 6mm thick closed cell nitrile rubber of the following sizes, with all required accessories Makes : Astral / Ashirvad or equivalentapproved by the department-25 mm dia

Manufacture supply delivery and fixing of MS gate of size 5x2.1m including cost and conveyance of hold pasts, all drops, all material and labour charges for fabrication and fixing for finished item of work.