CERTAIN REPAIRS TO ROOF LEKAGE SEEPAGE SUNKEN TREATMENT, FLOOR, WALL TILING INCLUDING KITCHEN, BATHROOM, TOILET IN MD AND OTM ACCN OF AGE BR-I UNDER GE (EAST) LUCKNOW.

Amount

Taking down cement or cement lime plaster any description from brick or stone walls/ceiling etc including raking out joints, hacking for key & scrubbing down with water complete all as specified and directed.

Dismantling of cast iron n exc 100mm or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if requred complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry (in portion) built in cement mortar including all quoins ,arches, piller etc complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) and area exc 1.5 Sqm but not exc 4 sqm each complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) and area not exc 1.5 Sqm each complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving exc 15cm thickness but above ground floors complete all as specified and directed.

S&F steel water tubes medium grade, galvanised with all fittings 15mm bore fixed complete to concilled in walls and ceiling or laid in floors including taking up or down steel tubing and connections, 15mm bore complete all as specified and directed.

S&F steel water tubes medium grade, galvanised with all fittings 20mm bore fixed complete to walls and ceiling or laid in floors trenches including taking up or down steel tubing and connections, 20mm bore complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) rain water pipes double socketed in any length with rubber rings joints fixed to walls/trenches complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends, any radius. complete all as specified and directed.

M&L for brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 complete complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on brick work or concrete surface of wall and finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on brick work or concrete surface of wall and finished surface even and smooth without using extra cement with WPC @3% complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:3 fair surface of ceiling finished surface even and smooth without using extra cement with WPC @3% complete all as specified and directed.

Preparation of new plastered surface of wall and applying three coats of white wash on wall complete all as specified and directed.

Prepration of new surface of wall and applying two coats of cement based paint white or tinted complete all as specified and directed.

M&L Prepration new plastered surfaces and applying two coat of white wash on ceiling complete all as specified and directed.

M&L Prepration old plastered surfaces and applying two coat of white wash on wall surfaces complete all as specified and directed.

S&F,framed work as in doors or gates of angle or other section with gusset plates,rails,braces etc. complete driilled for fixing steel sheeting or other coverings,doors etc,to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (excusive of steel sheeting and other coverings, running rails and guides) and hanging , also fastening and fixing complete Quality A Fe-410 W(Gde-E-250). complete all as specified and directed.

M&L For MS flat for hold fast conforming to Fe-310-0 or Fe-410-0 complete all as specified and directed.

S&F solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS Square tube etc complete all as specified and directed.

S&F factory made solid panel PVC door moulded shutter 30mm thick (style) consisting frame made out of MS tube for top and bottom rail MS frame shall be covered with heat mould plaint colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for style and plain colour PVC sheet for top rail lock and bottom rail on either side and as gap insert for top rail and bottom rail plain colour PVC sheet tape fixed in MS frame welding sealed to the style and rail with suitable PVC sheet bearing and jointing together with solvent cement etccomplete all as specified and directed.

S&F 35 mm thick flush shutter solid core construction with black board core and plywood face panels commercial type on both sides complete all as specified and directed.

S&F Steel window/ ventilator with top hung shutter including hinges steel peg stay, complete all as specified and directed.

S&F Steel window or ventilator fixed type with glazing bars complete all specified and directed.

S& F sheet glass 4mm thick glass is grounded or abscured or frosted, on one side complete all as specified.

S&F in repair 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads square area not exc 0.5 sqm in each pane complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed.

S&F 250 mm long aluminium alloy sliding door bolt with hasp & staple (bolt type ) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolts complete all as specified and directed.

S&F 200 mm long aluminium alloy sliding door bolt with hasp & staple (bolt type ) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolts complete all as specified and directed.

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed. complete all as specified and directed.

S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed. complete all as specified and directed.

S&F 125 mm size aluminium alloy handles fabricated type extruded section ,ISI marked complete all as specified and directed.

S&F 100 mm size aluminium alloy handles fabricated type extruded section ,ISI marked complete all as specified and directed.

S&F Butt hinges 125 mm stainless steel hinges medium weight and fixed complete all as specified and directed.

S&F Butt hinges 100 mm extruded aluminium alloy with galvanised mild steel hinges pin anodised type B-21 and fixed to PVC frame complete all as specified and directed.

M&L For preparation of old wood based materials of any description over 10 cm width or girth and applying Two coat of synthetic enamel paint complete all as specified and directed.

M&L Preparation of New steel surface of any description not otherwise described over 10 cm width or girth and apply two coat synthetic enamel paint complete all as specified and directed.

Cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required Exc half brick but not exc one brick. complete all as specified and directed.

Cutting chases pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings steps cills sunshades, shlves, lintels etc and cutting chases for concealed water tubing and making good to disturbed surfaces cutting not exc 10 CM in girth complete all as specified and directed.

M&L For 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base floor complete all as specified and directed.

M&L 25 mm thick cement concrete Type B-1 1:2:4 ( 20 mm graded stone aggregate) over sub base complete all as specified and directed.

M&L For non skid coloured ceramic tiles 7-8 mm thick coloured (Square/rectangular) area of each tiles exceeding 0.11 sqm but not exc0.18 sqm in floor including screed bed 15 mm thick or beding layer for laying floor finishes in CM 1:4 etc set and jointed in neat cement slurry and pointing in white or coloured cement to match complete all as specified and directed.

M&L For coloured glazed ceramic tiles 600 x 300 x 7 to 8 mm thick but as on vertical surfaces such as skirting / dado including 15 mm thick rendering in CM 1:4 complete all as specified and directed.

S&F Vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts flushing cistern and flush pipe ). and trap including connection to drain (or out going pipe) and to flushing pipe anti sphonage pipe etc complete including flush pipes and all joints add if fixed in repairs. complete all as specified and directed.

S&F Plastic water closet seat cover coloured/white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F Vitreous china squatting pan Orissa pattern size 630x450 mm white with P or S trap front or back inlet with integral foot rests (excluding flushing cistern and flush pipe ) complete including provision of lime concrete bedding add if fixed in repair. complete all as specified and directed.

S&F 10 Litres capacity PVC valveless syphonic action type flushing cistern low level, white with inlet ball valve float and handle including brackets connection to pipes and fixing of lever if any joint between flushing pipe and socket of WC pan pre-made complete all as specified and directed.

S&F in repair Vitreous china wash hand basin white angle back size 550x400 mm including 32 mm dia CP waste coupling long screwed shank fly nut flanged end and embedded in lead to waste pipe excluding pillar tap complete all as specified and directed.

S&F in repair bottle trap 32mm dia of PTMT having mimimum water seal of 25mm , (Minimum weight 32 mm-260 gms/40 mm-270gms). complete all as specified and directed.

S&F Vitreous china urinal, Half stal type white(excluding flushing cistern flushpipe and washte pipe) compete including providing and fixing plug, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60cm long brass screws pointing around urinal back in cement fixiing automatic flushing cistern with brackets, flush pipe grating and union for discharge pipe including connections to flushing pipe and outgoing pipes fixed in repair. complete all as specified and directed.

S&F 110mm PVC (SWR) junction single (single T) equal or unequal complete all as specified and directed.

S&F 100mm dia sand cast iron soil waste and vent pipes in any length with or without ears with cement fixed to walls or in floors. complete all as specified and directed.

S&F 75mm dia sand cast iron soil waste and vent pipes in any length with or without ears with cement fixed to walls or in floors. complete all as specified and directed.

S&F C I 100 mm dia branch pieces single ( equal or unequal) ordinary or inverted (spigot or socket type ) or with perallel branches. complete all as specified and directed.

S&F Bore of pipe in 100 mm CI bends (any radius) with ducks foot or heel rest. complete all as specified and directed.

S&F 100 cast iron sanitary connection socket to fit WC out let. complete all as specified and directed.

S&F 100mm dia of bore pipe stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stay including bolts and nuts and securing ends of stays to wall or roof. complete all as specified and directed.

S&F 100 mm Cast iron traps P or S trap, with grating including jointing to waste pipe fixed in cement concrete type B-1, 1:2:4) complete all as specified and directed.

S&F 75mm CI floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1, 1:2:4) complete all as specified and directed.

S&F 110 mm CI vent cowl complete all as specified and directed.

S&F 15mm dia fancy type chromium plated bib taps cast copper alloy with crutch or butterfly handle, scresed down screwed for iron pipe or for brass ferrule and fixed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair 15 mm dia Pillar tap cast copper alloy chromium plated fancy type with capstan head and cup screwed down screwed for G I pipe or for brass ferrule complete all as specified and directed.

S&F CP concealed stop cock for 15 mm bore pipe fixed as in repair complete all as specified and directed.

S&F 15mm dia fancy type chromium plated angle valve/ , cast copper ally screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed to GI Pipe. complete all as specified and directed.

S&F glass Shelf assembly consisting of 5.50mm thick glass sheet glass shelf 12cm wide with bracket guard and railing 60cm long complete all as specified and directed.

S&F corner glass Shelf assembly consisting of 5.5mm thick sheet glass 250x250mm size fixed with chromium brackets as in repairs complete all as specified and directed.

S&F in repair health feucet to EWC CP brass with minimum 1500mm long CP flexible pipe connection etc, complete all as approved complete all as specified and directed.

S&F 125 mm dia CP brass shower rose with or without swivel joints any size including fixing to steel pipe or union add if fixed in repair complete all as specified and directed.

S&F as in repair CP soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F CP brass towel rails 20 mm dia and 600 mm long fixed as in repair incl chromium plated brass screw and wooden / cleats complete all as specified and directed.

S&F brass Hat pegs solid body 125 mm to 175 mm brass fancy type complete all as specified and directed.

S&F PVC connection of 15 mm bore 600 mm long with brass coupling on both ends of superior quality all as specified. complete all as specified and directed. PTMT nuts fixed as in repair.

S&F 32mm dia PVC waste Pipe approx 900mm long for WHB and urinal complete all as specified and directed.

S&F rotational in repair moulded polyethylene water storage tanks 500 litre capacity, in white colour (cylindrical vertical with closed top) hoisted and fixed in position icluding dismantling of old water tanks complete all as specified and directed.

S&F rotational in repair moulded polyethylene water storage tanks1000 litre capacity, in white colour (cylindrical vertical with closed top) hoisted and fixed in position dismantling of old water tanks complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in benching and tank stanging complete all as specified and directed.

M&L cement concrete type E-2 1:5:10 (40mm brick aggregate)/cinder filling in sunken floor portion in WC/Bath complete all as specified and directed.

M& L for Cement concrete type C2 1:3:6 (40 mm graded agg ) as in foundation mass concrete complete all as specified and directed.

M& L for water proofing treatment to RCC sunken slab as under : (a) M&L 10mm Plastering in CM 1:4 over existing roof finished even and smooth without using extra cement with WPC @ 3% per kg of cement all as specifed and directed. (b) Priming surfaces and applying bituminous [email protected] ltr/sqm over cleaned and dry roof surface including parapet ( Make tank mastic from M/S STP OR EMUFALTE from Texa india ) (c) One coat of hat blown bitumen @ 1.2 Kg/Sqm of sunken floor and wall surfaces. (d) Laying one layer of APP based polymeric membrane 3 mm thick weight not less than 3.6 kg/sqm reinforced with non woven polyster fibre weight not less than 150 gmper sqm and sealed by torch application with aluminium overlap of 100 mm and 75 mm at end and side of polymeric membrane complete all as specified and directed.

S&F 32mm tubes light grade galvanised with all fiting and fixed complete to wall inside of sunken floor complete all as specified and directed.

M&L Precast RCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in cover slab of manholes,drain etc set in CM (1:4) complete all as specified and directed.

M&L TMT bars 10 mm dia and over cut to length to shape required including hooking ends and binding with mild steel wire (anuelled) wire not less than 0.9 mm dia complete all as specified and directed.

S&F exterior tiles of superior qulaity 25mm thick of approved size/design/shade set & jointed in neat cement slurry & pointed in white or coloured cement to match as in floor over and including 20mm thick screed bed in CM 1:4 , complete all as specified and directed. Make -Duracrete/Pivot/Ultra

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping, complete all as specified and directed.

M&L PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as in foundation,filling and mass concrete in surface channel,sub base of hardstanding complete all as specified and directed.

S&F in repair 60 thick M-35 grade ISI Marked, Machine pressed concrete rubber moulded interlocking any coloured paver block of any shape and size with grey cement and pigment over including 25 mm thick sand cushion complete all as specified and directed.

M&L for cement concrete 1:3:6 type C2 , 75 mm thick as in plinth protection and finishing the surface even and smooth without using extra cement. complete all as specified and directed.

Extra for for forming fair finished drain or channel 30 cm inner girth in cement concrete,using extra cement ,including forms ,moulds ,mi-tread/stopped ends etc. complete all as specified and directed.

Demolition of lime/cement concret in any despription along with tar felt treatment and cement mortar bedding, any description complete all as specified and directed.

M&L cement concrete type B-1, 1:2:4 (20mm graded aggregate) on roof slab complete all as specified and directed.

M/L for roof and edges (vertical or tappered) treatment with polymeric water proofing membrane with the following specification given below as under including dismantling of brick tile or terracing tile & existing treatment complete all as specified & directed:- (a) 10 mm thick screed bed/cement plaster on green concrete surface in cement mortar 1:4 with Liquid WPC as per manufacturer instruction & finished surface even and smooth (b) Applying a coat of bitumenous primer @ 0.50 Ltr/Sqm and allow to dry (c) Supply and laying APP based polymeric water proofing membrane, weight not less than 3.00 kg/sqm and and minimum 3 mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) sealed the side laps with spread temper (d) Applying Two coats of bitumen based aluminium painting on water proofing treatment

M&L for rendering 10mm thick on fair faces of concrete surfaces in cement mortar 1:3, mixed with liquid water proofing compound finished even and smooth without using extra cement including Liquid water proofing compound as per manufacturer instruction complete all as specified and directed.

M&L for providing and applying fibre reinforced elastomaric liquid water proofing membrane with resilient acrylic polymershaving sun reflective index(SRI) of 105 manufactered by asian paints ltd or equivalent as approve by GE on top of concrete roof in three coats @ 10.76 ltrs / 10 sqm .One coat of self priming of elastomaric water proofing liquid (Dilution with water in the ratio 3 :1 )and two coat of undiludted elestomeric waterproofing liquid (dry film thickness of complete allocation /system not less than 500 micron ). The operation shall be carried out after scrapping and properly cleaning loose partical with wire brushes complete in all respect as per the direction of Engr -in-Charge . Note Treatment shall be done through authorised representative of manufactures .

M&L preparation of old plastered surface and applying two coat oil emulsion distemper on prepared plastered surface complete all as specified and directed.

M&L two coat cement base paint on old prepared plastered surface with preparation of surfaces complete all as specified and directed.

M&L light shade Vitrified tiles 10mm thick (square/rectangular) polished,area of each tile not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4. complete all as specified and directed.

S&F in repair PVC and cupboard shelf/ partition/ frame/ shutter of 18mm thick side of panel externally impact perfact finish to the shutter and jointed together with solvent cement adhesive 8mm thick (4mmx 2) x 12mm wide PVC sheet is used as gap insert for top & bottom rail, 18mm x 1mm PVC edge lipping is done on top & bottom side using PVC solvent cement adhesive etc complete as per direction of Engr-in-Charge, manufacture's specification including dismantling of existing board. (Measurement shall be done of size of boarding in square) complete all as specified and directed.

S&F 150mm long fancy brass handle for cupboard & wardrobe shutter complete all as specified and as directed by Engr-in-charge

S&F 200mm long fancy brass handle for wardrobe shutter complete all as specified and as directed.

S&F fancy stainless steel folding handle of size 3 inch x 1/2 inch for wardrobe shutter complete all as specified and as directed.

S&F hydraulic slider of size 8"x1"x1/2" with steel ball, Aluminium body and striking plate incld letting complete all as specified and as directed. Make- Boss or equivalent

S&F 100mm brass Mortice lock (Godrej pattern), vertical type, 4-lever complete all as specified and as directed.

S&F auto hinges of 3"X2"X1" size SS body complete all as specified and directed.

S&F continous piano hinges of brass with width 30mm of flap . complete all as specified and directed.

Supply and fixing in repair stainless steel wardrope trolly of any shape and size with side sliding roller clip over stainless steel channel on both side fixed with steel size 33x20x8 inches with sliding rails complete. complete all as specified and directed. Make of basket - 3 Square, Make of channel - Hettich.

Supply and fixing in repair stainless steel modular type basket of size 20x16x8 inches with side sliding roller clip over stainless steel channel on both side fixed complete all as specified and as directed. Make of basket - 3 Square, complete all as specified and directed. Make of channel - Hettich.

Supply and fixing in repair stainless steel modular type basket of size 20x16x6 inches with side sliding roller clip over stainless steel channel on both side fixed complete all as specified and as directed. Make of basket - 3 Square, complete all as specified and directed. Make of channel - Hettich.

Supply and fixing in repair stainless steel modular type basket of size 20x16x4 inches with side sliding roller clip over stainless steel channel on both side fixed complete all as specified and as directed. Make of basket - 3 Square, Make of channel - Hettich.

S&F in repair Stainless steel half circle modular type basket of size 28x20x4 inches over stainless steel pipe revolving type with sliding rails complete all as specified and directed. Make of basket - 3 Square.

Supply and fixing in repair stainless steel modular type basket of size 20x20x4 inches (pull out 3 shelf) with side sliding roller clip over stainless steel channel on both side fixed complete all as specified and as directed. Make of basket - 3 Square, Make of channel - Hettich.

Supply and fixing in repair stainless steel modular type basket of size 20x20x12 inches (pull out 3 shelf) with side sliding roller clip over stainless steel channel on both side fixed complete all as specified and as directed. Make of basket - 3 Square, Make of channel - Hettich.

S&F in repair 15mm bore CP sink mixer with swinging casted spout with aerator for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.

S&F in repair 15mm bore CP long body Bib cock with wall flange with aerator screwed down for iron pipe and fixed complete all as specified and as directed.

M&L Preparation of old wooden surface of any description not otherwise described over 10 cm width or girth and apply two coat synthetic enamel paint complete all as specified and directed.

R P construction company

NEW BHARAT ENGINEERING AND CONSTRUCTION CO

suniltraders