Karnataka

Active

Works

Bridges

TIPTUR TALUK ROAD CONNECTING CHIKKANAYAKANALLI TIPTUR TO MADHYA HADAGALI ROAD VIA DODDAMARPANALLI BYDARALLI ROAD MINOR BRIDGE CONSTRUCTION AT CHAINAGE 10.10KM

Public Works Department

PWD Division Office Tumkuru | Karnataka

Amount: Refer DocsCloses: 2 Jul 2026

Tender Value

Refer Docs

EMD Value

₹1.6 L

Closing Date

2 Jul 2026, 9:30 pm

Similar Past Results

Similar tender results from the same govt authority in the past 3 years.

Tender Inviting Organisation

Name

Public Works Department

Work Description

TIPTUR TALUK ROAD CONNECTING CHIKKANAYAKANALLI TIPTUR TO MADHYA HADAGALI ROAD VIA DODDAMARPANALLI BYDARALLI ROAD MINOR BRIDGE CONSTRUCTION AT CHAINAGE 10.10KM

Tender Information

Tender ID

307582

Reference Number

PWD/2026-27/BG/WORK_INDENT36912

Tender Type

Open

Product Category

Bridges

Location

PWD Division Office Tumkuru

Source Website

Subscribe to view

Documents Required

5 documents required · 5 mandatory

Technical Bid

RequiredAnnual Turnover Certificate along with Audited Profit and Loss Statement certified by Chartered accountant with UDIN 2021-22 to 2025-26.

RequiredPWD Registration Certificate

RequiredWorkdone Certificate.

RequiredLine of Credit certificate

RequiredBid Capacity Details

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

EMD Payments through KPPP Portal mode shall be made as one single transaction and payments made in part are liable for rejection.

Conditional tenders will not be accepted.

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs

The employer is not responsible for any delay in accessing KPPP Portal.

Royalty on construction materials and other taxes will be deducted as per prevailing Govt. orders.

As per Karnataka state Government order LD/300/LET/2006 Bangalore dated 01.01.2007 and Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund.

All the formats prescribed in the bid document shall be filled by the tenderer in complete manner otherwise it will be rejected

All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval

The employer reserves the rights to Reject or accept any or all the tenders without assigning any reasons.

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the Standard Tender documents KW-3 K.P.W.D. and further orders there on.

In the case of the death of the contractor after executing the agreement / commencement of the work, his legal heir, if is an eligible registered contractor and is willing can execute and compete the work at the accepted tender rates irrespective of the cost of the work

Contractor should establish a fully functional laboratory at site at no extra cost in order to carry out all the required tests for the materials being used in the project

Contractor should take all precautions to ensure that no damage is caused to the existing canal CD works and other similar structures which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified at his own risk and cost.

Contractor should carryout additional test required to test the suitability of materials including borrow area before using the same either as sub-grade or base course materials.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent.

Formation levels and other data furnished are bare minimum. the contractor should make all efforts to validate and to get additional data if required at his own cost.

Contractor should execute the project with least impact to the environment especially during earthwork, laying of GSB, bituminous surface etc.

Contractor should adhere to HSE policy applicable for similar projects. Contractor to that extent should submit HSE document defining all the procedure including the policies before execution of the project

Further particulars, if any, required by the Contractor can be had from the office of the Executive Engineer, PWD, Division, Tumkur during office hours on all working days.

Materials like bitumen, steel, cement etc., required for the work shell be procured by the tenderer themselves and should got tested by the quality control authority before use on the work at their own cost.

The contractors assessed available tender capacity will be calculated as per the clause 3.6 of STD tender document Attached.

All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and conyence of all material and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer - in - charge of this work.

When embankments are constructed disputes arising on account of damages to the existing field / channels, bunds and other private properties, if any, has to be resolved by the contractor. All precautions should be taken by the contractor so that there are no damages to such public private properties

Contractor should take all precautionary measures to avoid any damage to the utilities during excavation as well as utility shifting. To that extent the contractor should indemnify the client.

Contractor should follow strictly the prevailing rules of labour act.

The tenderer who quotes amount less than amount put to tender should pay difference amount in the form of FDR purchased through any nationalized / scheduled bank payable in favor The Executive Engineer at the time of execution of the tender agreement

Note:- If any postponement of receipt date of tender, the same will be published in the KPPP protal portal.

The contractor shall maintain the road periodically, including removal of jungle, shoulder,drains and cross drain works asper the site conditions &as per the directions of Engineer in charge of work.

All the originals of uploaded documents in KPP-portal should be produced within 7 working days from the date of opening of Technical Bid at the Division Office, failing which the tender is liable for rejection. No separate communication will be made in this regard, failing which action will be taken as per tender conditions and registration rules

The returns submitted to the I.T. along with the Profit and Loss account statement,Balance sheet should be uploaded for the financial turnover criteria attested by registered Chartered Accountant.

Contractor should follow strictly the prevailing rules of labour act. Contractors are directed to employ only the labours who are registered in Labour Department, if the labours are not registered, they are to be registered before employing them to the work.

Contractors participating in the bid should submit Original Line of Credit of the copy uploaded through KPPP Portal with in one week after the last date of receipt of tenders. failing which their technical bids will be rejected.

Contractors should be registered with KPWD Class III and above Registration.

Within 20 days of receipt of the Letter of Acceptance, the successful Tenderer shall deliver to the Employer a Security deposit in any of the forms given below for an amount equivalent to 5% of the Contract price plus additional security for unbalanced tenders in accordance with Clause 25.5 of ITT and Clause 44 of the Conditions of Contract. :

The defect liability period for this project is 1 Year.

AS PER THE GOVT ORDER NO: FD417EXP-12/2024 DATED 09-08-2024 GST WILL BE PAID SEPARATELY

The quantities for the necessary deviation road and cofferdam are provided on a one time basis in the BOQ and any additional quantities required for completion of the work shall be deemed included in the Contractor rates no extra payment shall be admissible and such works shall be executed at the Contractor own cost and risk

Technical Criteria

General

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

3.2 c. executed in any one year, the following minimum 80% quantities of work:1) EWE/Embankment/Subgrade/Earthen Shoulders in Cum-2057.00 2) PCC/RCC in Cum-276.00 3)TMT Steel in Tonnes 18.16

Work Done Certificate

3.2 b. To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2021-22 to 2025-26 satisfactorily completed(Atleast 90% of the Contract Value) as a prime contractor for at least one similar Road work to an extent of 50% of the cost of the work, such as Bridge work of value not less than Rs. 39.55 Lakhs (Past experience ) Certified duly by the 0fficer not below the rank of Executive Engineer

Work Done Certificate

Capabilities of Vendor

3.6 Tenderers who meet the above specified minimum qualifying criteria, will only be qualified if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available tender capacity (A X N X 2.5 - B)where A-Maximum value of civil engineering works executed in any one year during the last five years(updated to 2026-27 price level) taking into account the completed as well as works in progress. N-Number of years prescribed for completion of the works for which tenders are invited.B- Value, at 2026-27 price level,of existing commitments and on-going works to be completed during the next 6 months (period of completion of the works for which Tenders are invited)

Others -- Bid capacity

Financial Status

3.1 All Tenderers shall provide the requested information accurately and in sufficient detail in Section 3 Qualification information. 1.To qualify for award of this contract,each Tenderer in its name should have in the last five years i.e. 2021-22 to 2025-26 achieved in at least two financial years an average of minimum financial turnover(in all classes of civil engineering construction works only) of Rs.79.11 Lakhs Financial Status(Certificate from CA with UDIN Number,if Failed to satisfy the condition tender will be rejected)

Audited CA Certificate of Annual Turnover

liquid assets and /or availability of credit facilities of not less than Rs 23.73 Lakhs Credit lines/ letter of credit/ certificates from Nationalized / Scheduled banks banks not less than 3 (Three months ) months old from the date of Tendering for meeting the fund requirement etc.

Audited CA Certificate of Annual Turnover

Fee & Financial Details

Tender Fee Amount

₹1,980

EMD Fee Amount

₹1.6 L

Important Dates

Last Activity

18 Jun 2026

Published

18 Jun 2026

Bid Opening

3 Jul 2026

Download Ends

1 Jul 2026

BOQ Preview

•

TIPTUR TALUK ROAD CONNECTING CHIKKANAYAKANALLI TIPTUR TO MADHYA HADAGALI ROAD VIA DODDAMARPANALLI BYDARALLI ROAD MINOR BRIDGE CONSTRUCTION AT CHAINAGE 10.10KM

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification - Granular material. Ref to MoRT&H : IRC - 710.1...

•

Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of ...

•

Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications. (Batching Plant). Ref to MoRT&H : IRC - 2702 ---- Item includ...

•

Drainage Spouts using 100 mm GI pipe complete as per drawing and Technical specification. Ref to MoRT&H : IRC - 2705 ---- Item including cost and conveyance of of all materials, lead and lift charges ...

•

Construction of RCC railing of M30 Grade in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre s...

•

PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification. Ref to MoRT&H : IRC - 2700 ---- Item including cost and conveyance of of all materials, lead and ...

•

Reinforced cement concrete M30 grade for approach slab including reinforcement and formwork complete as per drawing and Technical specification (Batching Plant). Ref to MoRT&H : IRC - 15...

•

Painting on concrete surface - Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and apply...

•

Filler joint - Providing and fixing in position 20 mm thick premoulded joint filler in expansion joint for fixed ends of simply supported spans not exceeding 10 m to cater for a horizontal movement up...

•

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and ...

•

Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification. Ref to MoRT&H : IRC - 2504 ---- Item including cost and conveyance...

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ...

•

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transporta...

•

Construction of Subgrade and Earthen Shoulders - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting...

•

Granular Sub-Base - Plant Mix Method - Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material...

•

Water Bound Macadam - Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand ...

•

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

•

Prime Coat over WMM/WBM - Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying ...

•

Tack coat on Granular surface treated with primer - Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on Granular Surface. R...

•

Bituminous Macadam Grading - II for traffic <20 MSA - Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading prem...

•

Semi Dense Bituminous Concrete - Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading pre...

•

PIPE CULVERTS - Providing and Laying Reinforced Cement Concrete Pipe NP3 as per design in Single Row - Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding...

•

Dismantling of Cement Concrete Pavement - Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 m3 in volume and stoc...

•

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

•

Road Delineators - Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fit...

•

Providing and fixing board displaying information, such as Name of work, Tender cost, Name of Contractor, Work completion and liability period etc, having rectangular shape of 1.2...

•

Supplying and Fixing of Molded Shank Raised Pavement Markers / Cats Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total int...

•

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface - Providing and laying of hot applied thermoplastic compound 2.5 mm thick including ref...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW 3 36912.doc

Tender Document • 1.76 MB

Ready to Participate?

Download all tender documents and submit your bid