Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹17.8 Cr
EMD Value
₹17.8 L
Closing Date
14 Jul 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Package No DHE-003-PM-ABHIM Construction of Critical Care Block (CCB) at DHH under National Health Mission in the Dhenkanal district of Odisha
NBCC/ODISHA/ZO/NHM/NIT/23-24/50
NBCC/ODISHA/ZO/NHM/NIT/23-24/50
Open Tender-Domestic
Civil Works General
Dhenkanal, Odisha
₹11,800
₹17.8 L
14 Jul 2023
30 Jun 2023
14 Jul 2023
14 Jul 2023
15 Jul 2023
13 0 Providing and laying plain cement concrete 0 0.00 0 0.00
1:4:8 (1 cement : 4 sand : 8 stone agregate
40mm nominal size) as levelling course in floor
and plinth including tempering, curring,
shuttering etc. complete all depth and height.
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
16 0 Fly Ash. brick masonry of size 25 cm. x 12 cm. 0 0.00 0 0.00
x 8 cm. having crushing strength not less than
75 kg. Per Sqr. Cm. in cement mortar of mix
(1:6) with approved grade cement and screened
& washed sand for mortar after immersing the
bricks for 6 (Six) hours in water before use in
foundation & plinth including splays cutting,
circular moulding, corbelling, chamfering and
similar such type of works, watering and curing
etc. including cost, conveyance, loading,
unloading, royalties and taxes of all materials,
cost of all labour, scaffolding, sundries, T&P
required for the works etc. complete in all
respect as directed by the Engineer-in-charge
18 0 Fly Ash. brick masonry of size 25 cm. x 12 cm. 0 0.00 0 0.00
x 8 cm. having crushing strength not less than
75 kg. Per Sqr. Cm. in cement mortar of mix
(1:6) with approved grade cement and screened
& washed sand for mortar after immersing the
bricks for 6 (Six) hours in water before use in
Superstructure including splays cutting, circular
moulding, corbelling, chamfering and similar
such type of works, watering and curing etc.
including cost, conveyance, loading, unloading,
royalties and taxes of all materials, cost of all
labour, scaffolding, sundries, T&P required for
the works etc. complete in all respect as directed
by the Engineer-in-charge
26 0 Framework: consist of 12mm thick particle 0 0.00 0 0.00
board panel with fabric Estrutions: aluminum in
oven baked powder coat finishBase cover size:
0.8mm thick aluminum plate powder coated
finish zero-rush, mould produced frame for
consistent shape and size Capping: Aluminum in
powder –coat finish Panel: tile partition
composed of FABRIC, Adjustable footing etc
complete with all necessary arrangements and
as directed by EIC.
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
31 0 RCC work M-25 grade as per approved designs 0 0.00 0 0.00
and drawings having a minimum compressive
strength (in work test) 25 N. / Square mm. in 15
cm. cubes at 28 days after mixing and test
conducted in accordance with I.S. 456 and I.S.
516 using 12 mm. to 20 mm. size black hard
crusher broken granite stone chips and screened
and washed sharp sand for mortar of approved
quality from approved quarry, washed and
cleaned (20 mm. size chips not to exceed 25 %
) to be mixed in concrete mixture with approved
grade cement including hoisting, lowering, laying
and compacting concrete by using vibrators,
watering and curing for 28 days, centring and
shuttering and finishing the exposed surface
smooth providing grooves or beads wherever
necessary including cost, conveyance, loading,
unloading, royalties and taxes of all materials
and cost of all labours, sundries, T&P, required
for the work etc. complete in all respect but
excluding cost and conveyance of M.S. rods or
Tor steel and binding wires and labour charges
for straightening, cutting, bending etc. of M.S.
rods or Tor steel tying the grills and placing in
proper position as per direction of the Engineer
36 0 Column up to Roof Beam Lvl. :- Cum 45.65 16186.296 7,38,904.41
44 0 Column up to Roof Beam Lvl. :- Cum 39.05 18202.09 7,10,791.61
51 0 Column up to Roof Beam Lvl. :- Cum 46.75 20615.662 9,63,782.20
58 0 Column up to Roof Beam Lvl. :- Cum 36.85 23505.6 8,66,181.36
65 0 Column up to Roof Beam Lvl. :- Cum 36.85 26966.54 9,93,717.00
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
71 0 Terrace Floor 0 0.00 0 0.00
72 0 Column up to Roof Beam Lvl. :- Cum 8.51 31111.29 2,64,757.08
77 8 Steel Reinforcement 0 0.00 0 0.00
78 0 Cutting, straightening coiled or bent up M.S. Rod 0 0.00 0 0.00
or tor steel of SAIL/ TATA / RINL (VIZAG) make
including bending, binding, welding and joining
if necessary and tying the grills and placing in
position as required for R.C.C. Work and for
providing fan hooks as required, hoisting,
lowering, laying including cost, conveyances,
taxes of M.S. Rod or tor steel and binding wires
of 18 to 20 gauge and labour required for the
work for bending, binding and tying the grills in
all floors (Linear measurement will be taken and
quantity will be calculated basing on the
standard weight of B.I.S. for M.S. Rods or tor
steel only. Wastage if any, including weight of
binding wire will not be considered for
measurement) etc. complete as per specification
& direction of Engineer-in-charge.
85 9 12 mm inside Plastering 0 0.00 0 0.00
86 0 Providing 12mm. Thick cement plaster in cement 0 0.00 0 0.00
mortar or mix(1:6) in all floors at all height with
cement & screened and washed sharp river sand
for mortar and finished smooth to the rough
surface of the brick masonary walls after racking
out the joints (alongwith providing grooves
wherever necessary) including watering and
curing,rounding of corners etc. complete with
cost, conveyance, loading, unloading, royalities
and taxes of all materials,cost of all labour,T&P,
and scaffolding required for the work etc. as
directed by the Engineer-in-charge.
93 10 16 mm outside Plastering (1:6) 0 0.00 0 0.00
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
94 0 Providing 16 mm thick cement plaster with 0 0.00 0 0.00
cement mortar of mix (1:6) with screened and
washed sharp sand for mortar and finished
smooth to the rough surface of walls in all
heights after racking out joints including
watering and curing, rounding of corners,
providing grooves where ever necessary with
cost, conveyance, royalties and taxes of all
materials with cost of all labour,labour cess,
T&P, and scaffolding required for the work etc.
complete in all respect as directed by the
Engineer in charge.
102 0 Providing 6 mm thick cement plaster with 0 0.00 0 0.00
cement mortar of mix (1:4) with screened and
washed sharp sand for mortar and finished
smooth to R.C.C. work after closed deep
chipping & slurry treatment including watering
and curing, rounding of corners, providing
grooves where ever necessary with cost,
conveyance, royalties and taxes of all materials
with cost of all labour, T&P, and scaffolding
required for the work etc. complete in all respect
as directed by the Engineer in charge.
109 12 Glazed Vitrified floor tiles 0 0.00 0 0.00
110 0 Supplying, fitting & fixing of 10 mm thick & 0 0.00 0 0.00
size of 600x600 mm Glazed Vitrified floor tiles
(GVT) of matt finish(WOODEN FINISH/RUSTIC
FINISH) with veilcraft (VC ) shield( Scratch
free/stain free) with water absorption limit
between 0.08% to 3% and conforming to IS :
15622:2006 (Group B Ib). laid on 20 mm thick
cement mortar (1:4) (1 cement : 4 course sand)
and filling joints with white cement of approved
quality including cost of all materials, labour T&P
etc. required for the work all complete as per
direction of the Engineer-in-charge (for New
116 13 Vertified tiles Skirting 0 0.00 0 0.00
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
117 0 Supplying, fitting & fixing of Vertified tiles in 0 0.00 0 0.00
dadoes, skirting and risers of steps laid on 12
mm thick cement mortar (1:3) (1 cement : 3
course sand) jointed with slurry mixed with
pigment to match the shades of the tiles etc.
complete including cost of all materials, labour
T&P etc. required for the work all complete as
per direction of the Engineer-in-charge
124 0 Supplying, fitting & fixing of Granite Tiles of 0 0.00 0 0.00
minimum Above 0.40 sqm. (20mm thick) of
approved make in floors laid on 20 mm thick
cement mortar (1:4) (1 cement : 4 course sand)
and filling joints with slurry including cost of all
materials, labour T&P etc. required for the work
all complete incl. rubbing as per direction of the
Engineer-in-charge.
130 15 Granite Tile Skirting 0 0.00 0 0.00
131 0 Supplying, fitting & fixing of Granite Tiles of 0 0.00 0 0.00
minimum Above 0.1sqm up to 0.4 sqm(10mm.
thick) of approved make in dadoes laid on 12
mm thick cement mortar (1:3) (1 cement : 3
course sand) and filling joints with slurry
including cost of all materials, labour T&P etc.
required for the work all complete incl. rubbing
as per direction of the Engineer-in-charge.
137 16 Antiskid Ceramic Floor Tiles 0 0.00 0 0.00
138 0 Supplying, fitting and fixing of Antiskid Ceramic 0 0.00 0 0.00
Floor Tiles in flooring using special plain /
printed series Ceramic Floor Tile of premium
grade ( having minimum thickness 7 mm to
8 mm & size 300 mm x300 mm, confirming to
I.S 13755 of approved quality and shade in
floors, treads on steps and landings on 20 m.m
thick bed of cement mortar of mix (1:4)aid in
proper slope and l gradient with screened &
washed sharp river sand for mortar and fixing
with neat white cement slurry,grouting the
joints with neat white cement
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
139 0 slurry mixed with required quantities of 0 0.00 0 0.00
pigments (Tiles are to be immersed in the water
for required time before use) of approved
make to match the shades of the Ceramic Floor
Tiles if required including cost, conveyance,
loading, unloading, stacking, royalties , all
taxes, cost of all Labour, Labour cess ,Sundries,
T&P required for the work , Watering , Curing
for required days , cleaning the flooring space
manually etc. complete in all respect as directed
by the Engineer-in-charge.
145 17 Antiskid Ceramic Floor Tiles Skirting 0 0.00 0 0.00
146 0 Supplying, fitting & fixing of Germ free Ceramic 0 0.00 0 0.00
wall tiles of premium grade of size 200x300mm
having thickness 6.5mm to 6.7mm confirming to
IS 13753 in dadoes, skirting and risers of steps
laid on 12 mm thick cement mortar (1:3) (1
cement : 3 course sand) jointed with slurry
mixed with pigment to match the shades of the
tiles etc. complete including cost of all materials,
labour T&P etc. required for the work all
complete as per direction of the Engineer-in-
153 0 Providing and fixing factory made single 0 0.00 0 0.00
extruded WPC (Wood Polymer Composite) solid
door/window/ Ceosetory window s & other
Frames/Chowkhat including 2 coats of Enamel
paint and one coat of wood primer fabricated
with miter joints after applying PVC solvent
cement and screwed with full body threaded star
headed SS screws having minimum frame
density of 750 kg/cum, screw withdrawal
strength of 2200 N (Face) & 1100 N (Edge) ,
minimum compressive strength of 58 N/mm2,
modulus of elast icity 900 N/mm2 and resistance
to spread of flame of Class A category with
property of being termite/borer proof,
water/moisture proof and fire retardant and
fixed in position with m.s hold fast/ lugs/ SS
dash fastner of required dia & length complete
as per the direction of engineer-in-charge.
159 19 Flush Door Shutter 0 0.00 0 0.00
160 0 Factory made 30mm/32mm flush door shutter 0 0.00 0 0.00
(Laminates both side of frame) with all labour,
iron fittings, and wooden hinged cleats etc fitted
and fixed complete in all respect
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
167 0 Factory made FRP( Altematly called GRP) door 0 0.00 0 0.00
frame of size 75mm x 100mm fabricated using
E - glass chopped strand mat (CSM) U.V
stabilised inopathalic Gel coat and impregnated
with inopathalic resin The thickness of the GRP
skins shall not be less then 2.0 mm . The door
frame consists of four segments which are
provided with plug in socket arrrangement in-
situ-in mould. The segments are plugged in and
are joined together by means of srew. The GRP
frame shall be provided with wooden
reinforcement on
168 0 six locations for high srew holding capacity for 0 0.00 0 0.00
fixing metalic hold fast and shall be consolidated
by filling with medium density foam / plaster of
paris with fibre reinforcement , six number of
260mm x 25mm x 5mm size 'S' shaped M.S flat
hold fast shall be provided with the frame. The
material and process for manufacturing the
finish of door frame shall conform to RV-TIFAC
composites Design centre's standards and
specifications . The finish of door frame will be
plain colour white /Ivory/Beige/Light grey /
Golden brown / Mahogany/ Teak wood /sand
stone Champagne/Pastel blue or any other
colour using high quality pigment complete in all
respect as per specification and direction of the
Engineer in Charge. etc. complete
174 21 GRP sandwich composite door shutter 0 0.00 0 0.00
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
175 0 Factory made GIRID FRP or called GRP sandwich 0 0.00 0 0.00
composite door shutter of 32mm thick
laminated with two GRP skin with good grain
finish fabricated using UV stabilised isoppthalic
gel coat and one layer of 450 gsm E-glass
chopped strand mat (CSM) impregnated with
ortopathilic resin The thickness of the skins shall
not be less than 1.50mm . Expanded polysryne (
EPS) structural foam panel of 29 mm tickness
and a density of 20kg/cu.mts shall be used as
core material wooden reinforcements made of
sesasoned sal wood block of cross section not
less than 28mm x 32mm and also necessary sal
wood reinforcements for fitting the metal fittings
such as lower bolts ,aldrops, handles etc. shall
be provided . A structural adhesive compatible
with (EPS)foam shall be used for bending the
core material. the sal wood reinforcements and
the skin The material and process for
manufactuing te door shutter shall conform to
176 0 TIFAC components design centre's standards 0 0.00 0 0.00
and specification and the door shutters tested in
conformation to IS 4020-1998. The Finish of
door shutter will be plain colour as per
specification and direction of the Engineer in
Charge. etc. complete
182 22 UPVC sliding window 0 0.00 0 0.00
183 0 Providing and fixing factory made 2 track 2 0 0.00 0 0.00
panel KOMMERLING uPVC white colour sliding
window comprising of uPVC multi-chambered
frame having section Frame 58mm x 49mm,
Window sash: 37mm x 61mm, made out of lead
free green profiles with corners fusion welded,
fully reinforced with Galvanized steel 1.5/2.0
mm. The windows profile should fulfill the
requirements of Viny 2010. The physical
properties of the profiles like Vicat softening
temperature, density, tensile strength, hardness,
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
184 0 weatherability, impact strength and Modulus of 0 0.00 0 0.00
Elasticity should be tested in accordance with
ASTM/DIN-ISO standards and the thermal
conductivity as per IS standards. The window
comprising of uPVC extruded glazing beads of
appropriate dimension, EPDM gasket, G.I
fasteners 100 x 8 mm size for fixing frame to
finished wall, plastic packers, plastic caps and
necessary stainless steel screws etc. After fixing
frame the gap between frame and adjacent
finished wall shall be filled with weather proof
silicon sealant over backer rod of required size.
The sash will be fitted with 5mm clear glass (
float ).complete in all respect as per specification
and direction of the Engineer in Charge. etc.
192 0 Supplying and Fixing of M.S. Grills etc including 0 0.00 0 0.00
cost,conveyance of all materials,priming,and
labour for fitting fixing etc.complete as per the
instruction of Engineer-in-Charge
199 24 Wall cement primer 0 0.00 0 0.00
200 0 Priming one coat with wall cement primer (water 0 0.00 0 0.00
bound) to make an even finished surface in all
floors and heights to wall surface of approved
make and shade including sand papering,
applying putty wherever necessary & cost of
scaffolding, staging charges with cost,
conveyance, taxes of all materials, cost of all
labour,labour cess T&P etc. complete as per the
direction of the Engineer-in-charge.
207 25 Weather Seal Paints 0 0.00 0 0.00
208 0 Painting two coats with approved anti-fungal 0 0.00 0 0.00
weather seal paints (ISI) of approved colour,
shade on wall surface over a coat of wall
primer(ISI) water bound including sand
papering, polishing the surface, cost,
conveyances of all materials and cost of all
labour,labour cess with T&P etc, complete as per
specification & direction of Engineer-in-charge.
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
215 26 Cement based Wall Putty 0 0.00 0 0.00
216 0 Finishing plastered surfaces of walls with cement 0 0.00 0 0.00
based wall putty (Water based) of approved
make and finishing the surface smooth and even
by sand papering to receive painting in walls, at
all heights with staging wherever necessary with
cost, conveyance, taxes of all materials, cost of
all labour,labourcess, all T&P etc. required for
the work complete in all respect as per the
direction of the Engineer-in-charge.
223 27 Plastic Emulsion Paint 0 0.00 0 0.00
224 0 Painting two coats with plastic emulsion paint 0 0.00 0 0.00
"Royale Shyne" over a coat of water bond
cement primer to make an even finished surface
in all floors and heights to wall surface of
approved make and shade including sand
papering, applying putty wherever necessary &
cost of scaffolding, staging charges with cost,
conveyance of all materials, cost of all
labour,labour cess, T&P etc. complete as per the
direction of the Engineer-in-charge.
232 0 Painting two coats with approved Enamel Paint 0 0.00 0 0.00
on wood work over a coat of Wood Primer in
239 29 Stainless Steel Railing 0 0.00 0 0.00
240 0 Providing and fixing stainless steel (Grade 304) 0 0.00 0 0.00
railing made of Hollow tubes, channels, plates
etc., including welding, grinding, buffing,
polishing and making curvature (wherever
required) and fitting the same with necessary
stainless steel nuts and bolts complete, i/c fixing
the railing with necessary accessories & stainless
steel dash fasteners , stainless steel bolts etc.,
of required size, on the top of the floor or the
side of waist slab with suitable arrangement as
per approval of Engineer-in-charge, (for
payment purpose only weight of stainless steel
members shall be considered excluding fixing
accessories such as nuts, bolts, fasteners etc.).
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
247 0 Providing and fixing 1 part Seal Arm Tape TPE 0 0.00 0 0.00
by sandwich with 2 component Epoxy System
Re Arm bond 4031 or equivalent, by doing
surface preparation as per ASTM D 4258/ 59 on
the cured hardened RCC Expansion joint
concrete as per manufacturer. specification (100
mm width expansion joint – treatment with 200
mm width tape) Applied top layer of mixed
epoxy adhesive @1 mm over the flexi joint tape
and extended a minimum 10 mm beyond edges
of the tape and allows for 24 hours self
curing. Protection of membrane by 250 mm
width Aluminum plate 2mm thick to be fixed by
Screw on one side and other side to left
unscrewed.(Optional)
253 31 Polyurethane waterproof coating 0 0.00 0 0.00
254 0 Providing and application of Polyurethane 0 0.00 0 0.00
waterproof coating: After the primer EPW44,
Single component liquid applied Elastomeric
based waterproofing system AquaArm WPU1KE
or equivalent should be of thickness of 1.5mm
as directed by the engineer in charge. The
formed membrane should have properties equal
or more than at 28 days Elongation: 450 %
confirming to ASTM D412 Tear resistance: 10 N
confirming to ASTM D624
Shore hardness: 80 confirming to ASTM C 836
100% Modulus Elongation: 0.6 MPa(ASTM D
Recovery from 200% elongation: (ASTM D 412):
> 80%No cracking or tearing: Extensibility after
(ASTM C 836) etc. as per direction of E.I.C
Protective cover is in client scope.
256 32 Grading Concrete 0 0.00 0 0.00
257 0 2.5 cm thick grading concrete (1:2:2) on roof 0 0.00 0 0.00
slab with 6.7mm & down grades size hard
granite crusher broken chips on new work
260 0 Providing and fixing of GRC Jali including cost of 0 0.00 0 0.00
material, conveyance of all materials, cost of all
labour,labour cess, T&P etc. complete as per the
direction of the Engineer-in-charge.
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
263 0 Providing and fixing of Swing Door of approved 0 0.00 0 0.00
make to be fabricated from roll formed sections
made of pre-painted steel (base steel as per IS-
513 of 0.6 mm thick “D” quality, galvanized as
per IS-277with zinc of 120 Gm/Sq.mtr) with
total coated thickness of 0.55 mm. Slide guide
section should be made of 0.5 mm stainless
steel of 430 grade. with paint specification being
with primer of 5-7 microns thick and finished
paint with polyster paint (Black /Pearl white/
Chocolate Brown) of 12-16 microns along with
the alkyd backer at the back of 5-7 microns and
the Sections for external frame bottom and top
should be of 79 x 45 mm. external frame sides
should be of 69 x 24 mm, guide for top and
bottom should be of 69 x 26mm (Stainless
264 0 Section for shutter should be of 26 x 30 mm, 0 0.00 0 0.00
Sash bar should be of 23 x 57mm.Accessories /
gaskets are to be used as per the
manufacturer’s supply and specification like
gasket will be made of EPDM. All corner brackets
for internal and external are to be made of glass
filled nylon. The sections are to be cut to length,
joined and assembled by means of corner
bracket and frames are fixed to the
concrete/masonry walls by means of self
expanding screws and glass to be used of 5 mm
reflective with cost, conveyance and taxes of all
materials, cost of all labour, T&P etc. complete
as per the direction of the Engineer-in-charge.
270 35 Gypsum wall false ceilling 0 0.00 0 0.00
271 0 Providing fitting and fixing of Gypsum wall false 0 0.00 0 0.00
ceilling with Aluminium anodised T Section No.
3215 with 2'-0" center to center, L section No.
1705 upto 15 micron on 4 walls to be fixed by
means of steel screw and P.V.C plug and the
Aluminium grid 2'-0"x2'-0" suspended from
ceiling etc complete
273 36 Plinth Protection 0 0.00 0 0.00
274 0 Making plinth protection 50mm thick of cement 0 0.00 0 0.00
concrete 1:3:6 (1 cement : 2 sand : 4 graded
stone aggregate 20 mm nominal size) over
100mm bed of dry brick ballast 40 mm nominal
size well rammed, consolidated and grouted and
fine sand and finishing the top smooth in proper
slop including all complete
276 0 APPROACH PATHWAY 0 0.00 0 0.00
277 1 Cement Concrete interlocking paver block of 0 0.00 0 0.00
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
278 0 Providing & laying of 60mm thick factory made 0 0.00 0 0.00
cement concrete interlocking paver block of M35
grade and approved make variety colour and
size made by Block making machin with strong
vibratory compaction of approved design and
shape, laid in required colour and pattern over
50mm thick compacted bed of coarse sand
,filling the joints with fine sand etc.all compelte
including cost,conveyance, royalty, taxes of all
materials,labour,T & P etc.Complete as per
direction of EIC.
281 0 Cement Concrete (1:3:6) using 4cm size hard 0 0.00 0 0.00
granite C.B. metal approved quality from
approved quarry including cost, carriage,
royalty, cost of all labour. etc complete.(A.R.-
2006, Page No - 43, Item No. - 3)
283 3 Kerb stone of M-25 grade 0 0.00 0 0.00
284 0 Providing and laying at or near ground level 0 0.00 0 0.00
factory made Kerb stone of M-25 grade cement
concrete in position to the required line, level
and curvature, jointed with cement mortar 1:3
(1 cement: 3 coarse sand), including making
joints with or without grooves (thickness of
joints except at sharp curve shall not to more
than 5mm), including making drainage opening
wherever required complete etc. as per direction
of Engineer-in-charge (length of finished kerb
edging shall be measured for payment). (Precast
C.C. Kerb stone shall be approved by Engineer in-
286 0 Sub-Total of Civil Works 0 0.00 0 108407308.52
287 II. Plumbing Works 0 0.00 0 0.00
288 0 Internal PH works 0 0.00 0 0.00
289 1 Supplying all materials, labour, T&P and 0 0.00 0 0.00
providing and fixing to wall or ceiling and floor U-
PVC pipes conforming to pipe fittings of the
following nominal bore with clamps including
making good the wall, ceiling and floor all
complete as per specification and direction of the
Engineer in charge
290 0 In Ground Floor-20mm dia U-PVC pipe Mtr 190.00 293.23 55,713.70
(Ashirbad/Supreme)
291 0 25mm dia C-PVC pipe (Ashirbad/Supreme) Mtr 70.00 397.424 27,819.68
292 0 In 1st Floor-20mm dia C-PVC pipe Mtr 250.00 293.23 73,307.50
(Ashirbad/Supreme)
293 0 25mm dia C-PVC pipe (Ashirbad/Supreme) Mtr 70.00 397.424 27,819.68
294 0 In 2nd Floor-20mm dia C-PVC pipe Mtr 160.00 293.23 46,916.80
(Ashirbad/Supreme)
295 0 25mm dia C-PVC pipe (Ashirbad/Supreme) Mtr 70.00 397.424 27,819.68
296 0 In 3rd Floor-20mm dia C-PVC pipe Mtr 170.00 293.23 49,849.10
(Ashirbad/Supreme)
297 0 25mm dia C-PVC pipe (Ashirbad/Supreme) Mtr 70.00 397.424 27,819.68
298 0 In 4th Floor-20mm dia C-PVC pipe Mtr 180.00 293.23 52,781.40
(Ashirbad/Supreme)
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
299 0 25mm dia C-PVC pipe (Ashirbad/Supreme) Mtr 70.00 397.424 27,819.68
300 2 Supplying all materials, labour, T&P and 0 0.00 0 0.00
providing and fixing to wall or ceiling and floor U-
PVC pipes conforming to pipe fittings of the
following nominal bore with clamps including
making good the wall, ceiling and floor for
Distribution of water supply and return in
between floors and Ringline over terrace floor all
complete as per specification and direction of the
Engineer in charge
301 0 32mm dia U-PVC pipe (Ashirbad/Supreme) Mtr 168.00 596.844 1,00,269.79
302 0 40mm dia U-PVC pipe (Ashirbad/Supreme) Mtr 168.00 933.144 1,56,768.19
303 0 50mm dia U-PVC pipe (Ashirbad/Supreme) Mtr 168.00 1243.248 2,08,865.66
304 0 80mm dia U-PVC pipe (Ashirbad/Supreme) Mtr 168.00 1903.93 3,19,860.24
305 0 110mm dia U-PVC pipe (Ashirbad/Supreme) Mtr 168.00 2805.686 4,71,355.25
306 0 In Terrace floor - 50mm dia U-PVC pipe Mtr 100.00 1243.248 1,24,324.80
308 3 Supplying all materials, labour, T&P and cutting 0 0.00 0 0.00
holes through existing brick work including
making good the damages in cement
mortar ( 1:4) for taking GI pipes and fittings/
PVC pipes and fittings etc all complete as per PH
specification and direction of the Engineer in
309 0 In Ground Floor Each 65.00 56.05 3,643.25
314 4 Supplying all materials, labour, T&P and cutting 0 0.00 0 0.00
hole in R.C.C floors, roofs, etc upto 19 cm thick
for passing G.I. Pipes / P.V.C pipes and fittings
etc and repairing the holes after insertion of
pipes etc with cement concrete (1:2:4 )
including finishing complete so as to make it
leak proof as per direction of the Engineer in
315 0 In Ground Floor Each 65.00 192.222 12,494.43
320 5 Supplying all materials, labour, T&P and cutting 0 0.00 0 0.00
grooves in pucca floors and walls for taking
GI/PVC pipes and making good the damages as
per the direction of the Engineer in charge
326 6 Supplying all materials, labour, T&P and cutting 0 0.00 0 0.00
holes through existing brick or laterite masonry
wall for taking HCI pipes and fittings including
making good the damages etc all complete as
per PH specification and direction of the
Engineer in charge
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
333 7 Supplying all materials, labour, T&P and fitting 0 0.00 0 0.00
and fixing brass/CP fittings of the following
nominal bore with supply of all jointing materials
complete as per specification and direction of the
Engineer in charge
334 0 15 mm dia CP L.B. Bib cock(CON-CHR-107KN) Each 36.00 1713.242 61,676.71
335 0 15mm dia CP angle stop cock (Con-CHR-053KN Each 98.00 1016.334 99,600.73
336 0 20mm dia CP Con. stop cock (CON-CHR-089KN) Each 50.00 1393.816 69,690.80
337 0 15mm dia CP two in one bib cock (Con-CHR- Each 35.00 1480.9 51,831.50
041KN Jaquar make)
338 0 15mm dia CP Health faucet (Con-ALD-MCH-573 Each 35.00 1945.466 68,091.31
339 0 15mm dia CP extension piece Each 134.00 69.974 9,376.52
340 0 Pillar cock(Jaquar-Madi series)FLR-CHR-5031N Each 42.00 2526.262 1,06,103.00
341 0 125mm dia C.P.gratings. Each 90.00 99.238 8,931.42
342 0 15mm C.P.revolving shower with 15mm x Each 5.00 773.136 3,865.68
225mm long CP shower arm.
344 0 Elbow action Bib cock(Jaquar)FLR-SSF-5043N Each 15.00 3484.54 52,268.10
345 0 25mm dia brass Fullway valve Each 80.00 1095.276 87,622.08
346 0 32mm dia brass Fullway valve Each 45.00 1603.502 72,157.59
347 0 40mm dia brass Fullway valve Each 52.00 2035.854 1,05,864.41
348 0 50mm dia brass Fullway valve Each 35.00 3014.31 1,05,500.85
349 0 25mm CPVC Ball valve Each 75.00 396.716 29,753.70
350 8 Supplying all materials, labour, T&P and fixing 0 0.00 0 0.00
bowl pattern urinal including connecting the
urinal with waste pipe by means of white lead
mixed with chopped hemp etc all complete as
per specification and direction of the Engineer in
351 0 Halfstall Urinal Each 8.00 2436.346 19,490.77
352 9 Supplying all materials, labour, T&P and fixing 0 0.00 0 0.00
glazed earthenware squatting plate of size
600mmx350mm with integral longitudinal
flushing pipe including embedding the plate in
25mm cement mortar (1:8) laid over 150mm
cement concrete (1:5:10) using 40mm hard
granite metal all complete as per specification
and direction of the Engineer in charge
353 0 Fixing of squatting urinal Each 2.00 3078.266 6,156.53
354 10 Supplying all materials, labour, T&P and fixing 0 0.00 0 0.00
vitreous china water closet, squatting pan
(Indian type W.C pan/Orissa pattern squatting
pan conforming to IS:2556-part-3-2004) duly
embedded in cement concrete (1:5:10) using
4cm size hard granite metal including fixing a
pair of vitreous china 250mm x 130mm x 30mm
footrest, fixing 100mm dia HCI ‘P’ or ‘S’ trap
(with/without 50mm dia horn) for water closet
squatting pan including jointing the trap with
pan in cement mortar (1:1), cutting the floor
and mending good the damages etc all complete
as per specification and direction of the Engineer
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
355 0 Fixing 580mmx440mm size Orissa pan Each 10.00 2574.052 25,740.52
(Parryware/Hindware/Neycer/Rak)
356 11 Supplying all materials, labour, T&P and fixing 0 0.00 0 0.00
Wash Down Water Closet (European type W.C
pan) with integral ‘S’ or ‘P’ trap to the floor with
wooden plug and chromium plated screws
including jointing the trap with soil pipe in
cement mortar (1:1) etc all complete as per
specification and direction of the Engineer in
(Parryware/Hindware/Neycer/Rak)
359 12 Supplying all materials, labour, T&P and fitting 0 0.00 0 0.00
and fixing 10 litres capacity low level flushing
cistern with a pair of cast iron or M.S brackets
complete with fittings such as siphonic
arrangements 15mm nominal size brass/pvc ball
valve with polythene float CP brass handle,
unions and couplings for connection with inlet,
outlet and overflow pipes,32mm dia CP flush
bend,15mm dia pvc inlet connection pipe
including cutting holes and making good the
same and connecting the flush bend with cistern
and closet and connecting the inlet pipe with
supply main etc all complete as per specification
and direction of the Engineer in charge.
360 0 10 litres PVC L.L. Cistern (Slimline-white) Each 45.00 1853.072 83,388.24
361 13 Supplying all materials, labour, T&P and fixing 0 0.00 0 0.00
wash basins with hole for pillar taps conforming
to IS:2556-part-4-2004 with cast iron or M S
brackets painted white including cutting holes in
walls and making good the damages with supply
of wooden plugs, screws and cement etc, fixing
pedestal for wash basin recessed at the back for
the reception of pipes and fittings, fixing PVC
waste pipe of 32mm nominal diameter for wash
basin including brass check nut complete, fixing
pillar taps capstan head screw down high
pressure lettered ‘Hot’ and ‘Cold’ with long
screws, shanks and back nuts of 15mm dia
nominal bore(Plaza make), fixing 15mm dia PVC
inlet connection pipe and making connection
with pillar cocks and supply mains for wash
basin, fixing 32mm dia CP brass waste(Plaza
make), etc all complete as per specification and
direction of the Engineer in charge
362 0 550mm x 400mm size W. H. Basin with Half Each 30.00 3649.504 1,09,485.12
Pedestal (Parryware/Hindware/Somany)
363 0 Under Counter basin(Hindware)No.10095. Each 15.00 4564.712 68,470.68
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
364 14 Supplying all materials, labour, T&P and fitting 0 0.00 0 0.00
and fixing U-PVC SWR soil waste ventilating
pipes and fittings of the following outside
diameter conforming to ISI No. 13592/1992 to
walls with nails, bobbins and wooden plugs or
laying in trenches including jointing with supply
of approved rubber lubricant by non-heat
application method/as per manufacturer’s
specification, testing, earthwork in excavation in
all kinds of soil and refilling of trenches as per
specification and direction of the engineer in
pipes(Supreme/Ashirvad)
366 0 75mm dia U-PVC SWR pipes(Supreme/Ashirvad) Mtr 125.00 358.838 44,854.75
368 0 100mm dia U-PVC Door Tee Each 85.00 346.448 29,448.08
369 0 100mm dia U-PVC Plain Bend Each 90.00 273.76 24,638.40
370 0 100mm U-PVC Door Cross Tee Each 60.00 650.416 39,024.96
371 0 75mm dia U-PVC Door Bend. Each 70.00 265.5 18,585.00
372 0 75mm dia U-PVC Plain Bend. Each 45.00 217.12 9,770.40
373 0 75mm dia Nahin trap Each 70.00 204.494 14,314.58
374 0 75mm dia Multi Floor Trap Each 50.00 348.454 17,422.70
378 0 PVC Clamp suitable for 75mm to 110mm dia Each 440.00 58.174 25,596.56
379 15 Supplying all materials, labour, T&P and fixing 0 0.00 0 0.00
mirror of superior glass conforming to IS:3438-
1996 mounted on 6mm thick A.C sheet or
plywood sheet and fixed to wooden plugs with
CP screws and washers complete as per
specification an direction of the Engineer in
380 0 Fixing 600mmx450mm size B.E mirror (fixed Each 15.00 758.386 11,375.79
381 0 Design mirror (Parryware) Each 20.00 1827.584 36,551.68
382 0 Large size mirror with frame 0 0.00 0 0.00
384 16 Supplying all materials, labour, T&P and fixing 0 0.00 0 0.00
standard sized glass-shelf with CP brass
brackets and guard rails complete fixed to
wooden plugs with CP screws as per
specification and direction of the Engineer in
385 0 600 x 125mm plate glass shelf with CP guard Each 30.00 711.894 21,356.82
386 16 Supplying all materials, labour, T&P and fixing 0 0.00 0 0.00
standard sized CP towel rail complete with CP
brass brackets fixed to wooden plugs with CP
screws as per specification and direction of the
Engineer in charge
387 0 25mm x 600mm long CP towel rail Each 15.00 827.652 12,414.78
388 0 CP towel rail Ring. Each 71.00 552.948 39,259.31
389 17 Supplying all materials, labour, T&P and fixing 0 0.00 0 0.00
CP soap holder complete with CP brass brackets
fixed to wooden plugs with CP screws as per
specification and direction of the Engineer in
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
391 18 Supplying all materials, labour, T&P and fixing 0 0.00 0 0.00
wash kitchen sink/laboratory sink with outlet at
end and weir overflow including fitting and fixing
a pair of cast iron or MS brackets painted white,
fixing 50mm/40mm dia CP brass waste, fixing
50mm/40mm dia PVC waste pipe 910mm long
with supply of wooden plugs, screws and cement
etc including cutting holes in walls and making
good the damages etc all complete as per
specification and direction of the Engineer in
sink(Hindware/Neycer)
393 19 Providing 15 mm dia Sink cock of Hindware Nos 19.00 7962.758 1,51,292.40
having cat no - F210024 as per IS : 13983 and
stainless steel plug 40 mm, including painting of
fittings and brackets, cutting and making good
the walls wherever required : all complete as per
specification and direction of the Engineer in
394 20 Supplying all materials, labour, T&P and 0 0.00 0 0.00
providing fitting and fixing Pure Chill 120 PSS UV
of size 750x570x1350mm height with water
storage capacity 120 liters along with 3 nos of
faucets 2 for cold water and 1 for normal water
including a flow of 1.5 ltr per minute etc all
complete as per approved drawing, specification
and direction of the Engineer in charge.
Aquaguard/Usha/Water Odisha
396 22 Supplying all materials, labour, T&P and 0 0.00 0 0.00
constructing gully trap chamber of the following
inside size with 8cm thick R.C.C precast cover
slab in cement concrete (1:2:4) mix using
12mm size h.g chips, foundation concrete
(1:4:8) using 40mm size hard granite metal on
bed and around trap, Fly ash brickwork in c.m
(1:6) in F&P and inside 12mm thick cement
plastering (1:3) finished with a floating coat of
neat cement including fixing 100mmx100mm
size HCI gully trap,150mmx150mm size C.I
grating etc all complete as per approved
drawing, specification and direction of the
Engineer in charge
397 0 Gully trap chamber of size 250mmx250mm with Each 30.00 1714.304 51,429.12
R.C.C cover slab
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
398 23 Supplying all materials, labour, T&P and 0 0.00 0 0.00
constructing inspection chamber of the following
size with cement concrete(1:3:6) using 40mm
size hard granite metal on bed, 1st class Fly ash
brickwork in cement mortar(1:6),moulding and
shaping the channel inside and benching with
cement concrete (1:2:4) using 12mm size h.g
chips,12mmthick cement plaster (1:3) with
punning to inside, cement flush pointing (1:3) to
outside, R.C.C cover slab in (1:2:4) using 12mm
size h.g chips with RCC man hole cover,
earthwork in excavation in all kinds of soil and
refilling the cavity around the chamber including
watering, curing, conveyance of all materials to
worksite, payment of royalty, taxes etc all
complete as per approved specification and
direction of the Engineer in charge
399 0 Inspection chamber Inside size Each 15.00 10476.866 1,57,152.99
760mmx760mmx460mm
400 0 Fitting and fixing RCPC cover slab (0.45m dia) Each 15.00 1289.858 19,347.87
401 24 Supplying all materials, labour, T&P and filling in 0 0.00 0 0.00
foundation and plinth with sand well watered
and rammed including conveyance of all
materials to worksite, payment of royalty, taxes
etc all complete as per direction of the Engineer
403 25 Supplying all materials, labour, T&P and 0 0.00 0 0.00
providing cement concrete (1:4:8) with 4cm size
hard granite metal including watering, curing,
conveyance of all materials to worksite, payment
of royalty, taxes etc all complete as per
specification and direction of the Engineer in
405 26 Supplying all materials, labour, T&P and 0 0.00 0 0.00
providing cement concrete (1:2:4) with 12mm
size hard broken granite chips including
watering, curing, conveyance of all materials to
worksite, payment of royalty, taxes etc all
complete as per specification and direction of the
Engineer in charge
406 0 In Ground Floor 0 0.00 0 0.00
416 27 Supplying the waterproofing material Pidifin 2K 0 0.00 0 0.00
of Dr.fixit on equivalent water proofing material
and appling in two coat over the concrete floor
and dado upto 1"-6" in wall including
cleaning,applying and mending as per
specification including all labour charges as per
direction of Engineer-in-charge.
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
417 0 In Ground floor Sqm 77.81 0 0.00
418 0 In First floor Sqm 72.31 0 0.00
419 0 In Second floor Sqm 39.32 0 0.00
420 0 In Third floor Sqm 46.73 0 0.00
421 0 In Fourth floor Sqm 46.73 0 0.00
423 28 Supplying all materials, labour, T&P and filling in 0 0.00 0 0.00
sunken floor in toilets with cinder (light weight
slag) well watered and rammed include
conveyance of all materials to worksite payment
of royalty, taxes etc all complete as per
specification and direction of the Engineer in
425 29 Supplying all materials,labour,T&P and fixing 0 0.00 0 0.00
Rotational moulded cylindrical vertical water
storage tanks Sintex Reno (white
colour)conforming to IS : 12701--1996 including
cutting holes through the tank and fixing mild
steel/PVC tubes and fittings and providing extra
sockets and jam nuts, fixing ball valve etc,
including hoisting upto a height of 5 metres
above ground level and placing the tank to the
required position. conveyance of all materials to
worksite etc all complete as per specification and
direction of the Engineer in charge
426 0 5000 litre capacity water storage tanks each 1.00 38586 38,586.00
427 B. Construction of 20 KLD RCC Over Head Tank of 0 0.00 0 0.00
Fire Fighting Tank,
Inside size- 4.40 X 3.70 X1.50m-Terrace Floor
428 1.1 Supplying all materials, labour, T&P and 0 0.00 0 0.00
providing cement concrete (1:1½:3)with 12mm
size hard broken granite chips for R.C.C works
including hoisting, laying, watering, curing,
conveyance of all materials to worksite, payment
of royalty, taxes etc all complete as per
specification and direction of the Engineer in
436 1.2 Supplying all materials, labour, T&P and 0 0.00 0 0.00
providing M.S.Reinforcement for RCC work
including cutting, banding, binding, straightening
and trying the grills and placing in position
including cost of binding wire 18 to 20 gage.
438 1.3 Supplying all materials, labour, T&P and 0 0.00 0 0.00
providing rigid and smooth centering and
shuttering for RCC work including false work and
dismantling then after casting including cost of
materials complete in ground floor.
439 0 RCC floor roof, chajja etc 0 0.00 0 0.00
443 1.4 RCC Beam, Column, wall etc 0 0.00 0 0.00
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
449 0 Short wall out side - 2x4.20x1.10 0 9.24 0 0.00
451 1.5 Supplying all materials, labour,T&P and 0 0.00 0 0.00
providing 6mm thick cement plasster (1:4) over
CC work including watering curring and
conveyance of all materials to site.
455 1.6 Supplying all materials, labour, T&P and 0 0.00 0 0.00
providing cement punning including watering,
curring and conveyance of all materials to site.
456 0 Quantity same as item No-4 0 78.60 46.02 3,617.17
457 1.7 Supplying and fitting and fixing stainless steel 34 0 50.00 395.3 19,765.00
grade in said rail using 5mm dia 2mm thick
circular pipe and lalustrade 32mmx32mmx2mm
at the rate of mtr.Center to center and square
pipe 32x32x2mm below including welding with
stanless steel elect rod and fixing with necessary
accessories etc.complete as per direction of the
Engineer-in-charge.
458 1.8 Providing fitting and fixing MS cover made out of 0 40.00 109.8816 4,395.26
MS angle and sheet duly welding and fixing with
frame and hinges along with locking
arrangement of size 60cmx60cm etc complete
as per direction of Engineer-in-charge
459 C. Construction of 15 KLD RCC Over Head Tank of 0 0.00 0 0.00
Domestic Water Tank,
Inside size- 5.00X3.00X1.00 M-Terrace Floor
460 1.1 Supplying all materials, labour, T&P and 0 0.00 0 0.00
providing cement concrete (1:1½:3)with 12mm
size hard broken granite chips for R.C.C works
including hoisting, laying, watering, curing,
conveyance of all materials to worksite, payment
of royalty, taxes etc all complete as per
specification and direction of the Engineer in
468 1.2 Supplying all materials, labour, T&P and 0 0.00 0 0.00
providing M.S.Reinforcement for RCC work
including cutting, banding, binding, straightening
and trying the grills and placing in position
including cost of binding wire 18 to 20 gage.
470 1.3 Supplying all materials, labour, T&P and 0 0.00 0 0.00
providing rigid and smooth centering and
shuttering for RCC work including false work and
dismantling then after casting including cost of
materials complete in ground floor.
471 0 RCC floor roof, chajja etc 0 0.00 0 0.00
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
475 1.4 RCC Beam, Column, wall etc 0 0.00 0 0.00
480 0 Short wall inside - 2x3x1.10 0 7.48 0 0.00
481 0 Short wall out side - 2x3.40x1.10 0 7.48 0 0.00
483 1.5 Supplying all materials, labour,T&P and 0 0.00 0 0.00
providing 6mm thick cement plasster (1:4) over
CC work including watering curring and
conveyance of all materials to site.
487 1.6 Supplying all materials, labour, T&P and 0 0.00 0 0.00
providing cement punning including watering,
curring and conveyance of all materials to site.
488 0 Quantity same as item No-4 0 53.44 46.02 2,459.31
489 1.7 Supplying and fitting and fixing stainless steel 34 0 50.00 395.3 19,765.00
grade in said rail using 5mm dia 2mm thick
circular pipe and lalustrade 32mmx32mmx2mm
at the rate of mtr.Center to center and square
pipe 32x32x2mm below including welding with
stanless steel elect rod and fixing with necessary
accessories etc.complete as per direction of the
Engineer-in-charge.
490 1.8 Providing fitting and fixing MS cover made out of 0 40.00 109.8816 4,395.26
MS angle and sheet duly welding and fixing with
frame and hinges along with locking
arrangement of size 60cmx60cm etc complete
as per direction of Engineer-in-charge
491 D. External PHE Works 0 0.00 0 0.00
492 1 Supplying all materials, labour, T&P and 0 0.00 0 0.00
constructing surface drain of size A-4 type with
cement concrete (1:3:6) using 12mm size h.g
chips on bed, 1st class Fly ash brickwork in
cement mortar (1:3) inside, 12mm thick cement
plaster (1:3) finished smooth with cement
punning including watering, curing, conveyance
of all materials to worksite, payment of royalty,
taxes etc all complete as per specification and
direction of the Engineer in charge
494 2 Supplying all materials, labour, T&P and laying in 0 0.00 0 0.00
trenches (to level or slope) unplasticized PVC
pipes conforming to IS: 4985/2000 of the
following outside dia for class–3(0.60mpa)
including jointing with supply of approved
solvent cement by non-heat application
method/as per manufacturer’s specification,
providing and laying in trench cement concrete
(1:4:8) with 40mm size hard granite metal in
the Type C-1 standard bedding surrounding or
encasing including concrete for bedding and
curing etc all complete as per PH specification
and direction of the Engineer in charge.
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
495 0 110mm dia u-pvc pipe alround concrete 0 180.00 1268.618 2,28,351.24
496 0 160mm dia u-pvc pipe alround concrete 0 140.00 2052.964 2,87,414.96
497 0 200mm dia u-pvc pipe alround concrete 0 150.00 2220.76 3,33,114.00
498 3 Supplying all materials, labour, T&P and 0 0.00 0 0.00
constructing man hole chamber of the following
size with cement concrete(1:3:6) using 40mm
size hard granite metal on bed, 1st class Fly ash
brickwork in cement mortar(1:6), moulding and
shaping the channel inside and benching with
cement concrete (1:2:4) using 12mm size h.g
chips,12mmthick cement plaster (1:3) with
punning to inside, cement flush pointing (1:3) to
outside, R.C.C cover slab in (1:2:4) using 12mm
size h.g chips with RCC man hole cover,
earthwork in excavation in all kinds of soil and
refilling the cavity around the chamber including
watering, curing, conveyance of all materials to
worksite, payment of royalty, taxes etc all
complete as per approved specification and
direction of the Engineer in charge
499 0 Man hole chamber Inside size 0 15.00 20393.232 3,05,898.48
910mmx910mmx910mm
501 E. Construction of 6.75mx3.60m x 1.40m(h) Rain 0 0.00 0 0.00
Water Recharge Pit
502 1 Sinking of tube well through D.T.H.Rig. 0 0.00 0 0.00
504 2 Lowering of PVC casing pipe inside bore. 0 0.00 0 0.00
507 4 Cutting slot in casing pipe for recharge of rain 0 25.00 417.13 10,428.25
508 5 Labour for packing gravel outside the tube well 0 0.00 0 0.00
510 6 Cost of washed gravel. 0 4.70 1902.632 8,942.37
511 7 Earth work in all kinds of soil within 50 mtr initial 0 0.00 0 0.00
lead and 1.5mtr initial lift including rough
dressing and breaking clods to maximum 5cm to
7cm and laying in layers not exceeding 0.3 mtr
in depth and as per direction of the Engineer in
513 8 Supplying all materials, labour, T&P and 0 0.00 0 0.00
providing cement concrete (1:4:8) with 4cm size
hard granite metal including watering, curing,
conveyance of all materials to worksite, payment
of royalty, taxes etc all complete as per
specification and direction of the Engineer in
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
518 9 Supplying all materials, labour, T&P and 0 0.00 0 0.00
providing brick work with Fly ash bricks having
crushing strength not less than 75kg/cm² with
dimensional tolerance ± 8 percent in cement
mortar (1:6) including watering, curing,
conveyance of all materials to worksite, payment
of royalty, taxes etc all complete as per
specification and direction of the Engineer in
522 10 Supplying all materials, labour, T&P and 0 0.00 0 0.00
providing 12mm thick cement plaster (1:4) on
brickwork including watering, curing,
conveyance of all materials to worksite, payment
of royalty, taxes etc all complete as per
specification and direction of the Engineer in
528 11 Supplying all materials, labour, T&P and 0 0.00 0 0.00
providing cement punning including watering,
curing, conveyance of all materials to worksite,
payment of royalty, taxes etc all complete as per
specification and direction of the Engineer in
532 12 Supplying all materials, labour, T&P and 0 0.00 0 0.00
providing rigid and smooth centering and
shuttering for R.C.C works including false work
and dismantling them after casting including
conveyance of all materials to worksite, payment
of royalty, taxes etc all complete as per
specification and direction of the Engineer in
536 13 Earth work in excavation of foundation in all 0 0.00 0 0.00
kinds of soil within 50 mtr initial lead and 1.5mtr
initial lift including rough dressing and breaking
clods to maximum 5cm to 7cm and laying in
layers not exceeding 0.3 mtr in depth and as per
direction of the Engineer in charge.
538 14 Supplying all materials, labour, T&P and 0 0.00 0 0.00
providing M.S reinforcement for R.C.C work
including cutting, bending, binding, and tying the
grills and placing in position including cost of
binding wire 18 to 20 gauge, conveyance of all
materials to worksite, payment of royalty, taxes
etc all complete as per specification and
direction of the Engineer in charge
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
540 15 Providing and filling filter media 0 0.00 0 0.00
544 18 Providing fitting and fixing M.S.grill,Jalli cover 0 4.00 10988.16 43,952.64
over the harvesty pindi
545 F. Sinking of 200mm/150mm size Tube/ Bore well 0 0.00 0 0.00
through ODEX or Combination drilling rigs in
boulder formation areas with M.S casing pipes..-
546 1 Supplying all labour and drilling perfectly vertical 0 0.00 0 0.00
bore holes in boulder formation areas with down
the hole hammer drilling rigs or combination
drilling rigs to suit the site condition with
deployment of rig, necessary accessories and
consumables for a specified depth below ground
level including supply of necessary cashing shoe,
odex tools and plants, jointing materials, extra
sockets where required withdrawing of pipes,
lowering the M.S. (ERW) pipes and fitting and
fixing in perfectly vertical position including
cutting and welding for jointing the pipes for
simultaneous casing lowering in over burden
boulder formation till encounter of hard rock and
to drill 200mm DTH upto the desired depth as
may be necessary,
547 0 clearing the site and washing bore etc., all 0 0.00 0 0.00
complete providing sanitary sealing upto 5
metres depth below ground level as per the
direction of Engineer-in-charge
548 a Labour for drilling of 200mm dia bore 0 0.00 0 0.00
550 ii (The over burden boulder formation by ODEX 0 0.00 0 0.00
551 2 Labour for drilling a perfectly vertical bore hole 0 0.00 0 0.00
of 100mm dia for a specified depth below
boulder zone through consolidated and
unconsolidated rock with down the hole hammer
drilling rigs or combination drilling rigs as
required to suit the site condition as per the
direction of Engineer-in-charge including use of
own rigs with its accessories, tools and plant and
consumables etc.
552 i Lowering of 200mm dia MS casing pipes 0 mtr 0 120.00 1024.24 1,22,908.80
554 3 Cleaning and developing the tube well using 0 2.00 7771.48 15,542.96
their own compressor continuously worked till
clear and adequate discharge is obtained from
the tube well including supply and use of all
necessary equipment and labour as per the
direction of Engineer-in-Charge
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
555 4 Supplying all materials,labour,T&P and 0 0.00 0 0.00
providing around sealing by cement concrete
grouting of annualr space around GI/PVC
housing pipe upto 5 mtr below ground level ( as
per drawing ) to plug the bore hole excluding
cost of cement all complete as per direction of
the Engineer-in-charge . Mimimum one meter of
casing pipe to nserted in the bore in to the rock
the bottom to ensure sanitary sealing (
excluding cost of cement which willbe supplied
by the Department )
556 i Sanitary sealing upto 5 mtr below ground level 0 2.00 1384.258 2,768.52
557 5 CC(1:2:4) with 12mm chips for grouting up to 5 0 0.40 7196.584 2,878.63
558 6 Supplying all materials, labour, tools and plant 0 80.00 322.376 25,790.08
and withdrawing casing pipe from the
unsuccessful bore and depositing in the
departmental store in good condition
559 7 Supplying the following materials including 0 0.00 0 0.00
tronsportation to site including loading and
unloading etc. Complete as per direction of
Engineerin-charge.
564 0 Welding electrod 0 8.00 578.2 4,625.60
565 8 Supply all materials, labour, T&P and 0 0.00 0 0.00
providing,fitting and fixing submersible pump
with squirrel cage induction type submersible
type submersible electric motor to run on 3
phase/1phase line voltage ranging from 320 volt
to 450 volt conforming to IS:8034/89 with
following specifications with suitable control
pannel, jointing with GI/PVC/HDPE pipes
electrification, testing,commissioning,trial
running, conveyance of all materials to
worksite, payment of taxes etc all complete as
per specification and direction of the Engineer in
566 i 2HP Three Phase 5 stage submersible pump set. 0 2.00 19636.38 39,272.76
567 ii DOL control panel 0 2.00 4490.49 8,980.98
568 iii 50mm S. S. Nipple, S. S. bolt & clips 0 4.00 1180 4,720.00
569 iv 50mm M. S. Clamp, Bend, Socket & 200mm M. 0 2.00 1416 2,832.00
570 v 2.50mm Sqm Submersible flat cable 0 300.00 151.158 45,347.40
571 vi Steel rope with cover 0 120.00 31.506 3,780.72
572 vii 20mm dia rigid U-PVC pipe 0 60.00 8.142 488.52
574 ix Labour charges for lowering, testing, 0 2.00 2360 4,720.00
commissioning & transportation to site etc.
575 9 Supplying all materials, labour, T&P and 0 0.00 0 0.00
providing and fixing to wall or ceiling and floor
CPVC pipes of the following nominal bore and
pipe fittings with clamps including making good
the wall and testing as per specification and
direction of the Engineer in charge
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
577 10 Earth work in all kinds of soil within 50 mtr initial 0 81.00 254.7502 20,634.77
lead and 1.5mtr initial lift including rough
dressing and breaking clods to maximum 5cm to
7cm and laying in layers not exceeding 0.3 mtr
in depth and as per direction of the Engineer in
578 11 Supplying all materials, labour T&P and fitting 0 0.00 0 0.00
and fixing brass/CP/PVC fittings of the following
nominal bore with supply of all joiniting
materials complete as per specification and
direction of the Engineer in charge.
580 ii 50mm dia Brass Check Valve 0 1.00 3143.992 3,143.99
581 iii 50mm dia Brass F. W. Valve 0 4.00 3009.708 12,038.83
582 12 Supplying all materials, labour, T&P and 0 0.00 0 0.00
construction of Fullway valve chamber/Stop cock
chamber of the following inside size for fullway
valve with cement concrete slab (1:2:4) mix ,
7.50cm thick, foundation concrete (1:5:10) and
inside plastering with cement mortar (1:3)
finished with a floating coat of neat cement
including curing etc all complete as per approved
specification and direction of the Engineer in
584 G. Construction of 150000 Liters RCC UGR for Fire 0 0.00 0 0.00
Fighting of Inside size- 6.00 X 7.500 X3.50m
585 1.1 Providing & Constructing RCC underground 0 0.00 0 0.00
sump of 150000 ltr. Capacity including RCC top
cover, ladder, airvent, inlet and outlet pipe,
water proofing including pipeline from UG Sump
to top over head tank with its pump and etc. as
per the design provided by the engineer in
587 0 For Production well. 0 0.00 0 0.00
588 1.2 2 H.P three phase 3 stage head range 30 to 54 0 1.00 19618.208 19,618.21
metres, discharge 155 to 110 L.P.M with outlet
591 1.5 32mm dia steel short piece 0 4.00 179.714 718.86
592 1.6 Steel rope with cover 0 50.00 31.506 1,575.30
595 1.9 20mm dia rigid UPVC pipes 0 100.00 8.142 814.20
596 H. Construction of 60000 Liters RCC UGR for 0 0.00 0 0.00
Domestic Water of Inside size- 6.00 X
597 1.1 Providing & Constructing RCC underground 0 0.00 0 0.00
sump of 60000 ltr. Capacity including RCC top
cover, ladder, airvent, inlet and outlet pipe,
water proofing including pipeline from UG Sump
to top over head tank with its pump and etc. as
per the design provided by the engineer in
599 0 For Production well. 0 0.00 0 0.00
600 1.2 2 H.P three phase 3 stage head range 30 to 54 0 1.00 19618.208 19,618.21
metres, discharge 155 to 110 L.P.M with outlet
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
603 1.5 32mm dia steel short piece 0 4.00 179.714 718.86
604 1.6 Steel rope with cover 0 130.00 31.506 4,095.78
607 1.9 20mm dia rigid UPVC pipes 0 100.00 8.142 814.20
608 I. Construction 2 Nos. RCC Septic Tank (50 Kld 0 0.00 0 0.00
Each.) & Soak Pit
609 1.1 Earth work in excavation of foundation in all 0 0.00 0 0.00
kinds of soil within 50m initial lead and 1.5m
initial lift including rough dressing & breaking
clods to maximum 5cm to 7cm and laying in
layers not exceeding 0.3m in depth and as per
direction of the Engineer-in-Charge.
611 1.2 -do- with Ist disintegrated rockadditional depth 0 0.00 0 0.00
of 1.50 m over the initial lead and lift
613 1.3 Supplying all materials,labour ,T&P and filling in 0 0.00 0 0.00
foundation and plinth with sand well watered
and rammed including cost, conveyance of all
materials to work site ,payment of royalty,taxes
etc. all complete as per direction of the Engineer-
615 1.4 Supplying all materials, labour, T&P and 0 0.00 0 0.00
providing cement concrete ( 1:4:8 ) with 4cm
size crusher broken hard granite metal including
watering, curing, cost of all
materials,conveyance of all materials to work
site with payment of royalty, all taxes etc all
complete as per P.W.D specification and
direction of Engineer-in-charge.
617 1.5 Supplying all materials, labour, T&P and 0 0.00 0 0.00
providing cement concrete ( 1:2:4 ) with 12mm
size crusher broken hard black granite chips
including watering, curing,cost of all materials,
conveyance of all materials to work site with
payment of royalty, all taxes etc all complete as
per P.W.D specification and direction of Engineer-
619 1.6 Supplying all materials, labour, T&P and 0 0.00 0 0.00
providing cement concrete (1:1:5:3) with 12mm
size hard broken granite chips for R.C.C works
including hoisting, laying, watering, curing,
conveyance of all materials to worksite, payment
of royalty, taxes etc all complete as per
specification and direction of the Engineer in
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
625 1.7 Supplying all materials, labour, T&P and 0 0.00 0 0.00
providing rigid and smooth centering and
shuttering for R.C.C works including false work
and dismantling them after casting including
conveyance of all materials to worksite, payment
of royalty, taxes etc all complete as per
specification and direction of the Engineer in
633 0 Partition wall 0 16.80 0 0.00
635 1.9 Supplying all materials, labour, T&P and 0 0.00 0 0.00
providing M.S reinforcement for R.C.C work
including cutting, bending, binding, and tying the
grills and placing in position including cost of
binding wire 18 to 20 gauge, conveyance of all
materials to worksite, payment of royalty, taxes
etc all complete as per specification and
direction of the Engineer in charge
637 1.1 Supplying all materials,labour,T&P and providing 0 0.00 0 0.00
6mm CP (1:4) with cement punning on brick
work including watering,curing,cost of all
materials, conveyance of all materials to
worksite,payment of royalty,all taxes etc.all
complete as per PWD specification and direction
of the Engineer-in-charge.
641 1.11 Supplying all materials, labour, T&P and 0 0.00 0 0.00
providing,fitting and fixing 100mm x 100mm x
100mm SW Tee in wall including filling the
recess with cement concrete (1:3:6) with 12mm
size h.g chips all complete including watering,
curing, conveyance of all materials to worksite,
payment of royalty all complete as per
specification and direction of the Engineer in
643 1.12 Supplying all materials, labour, T&P and making 0 0.00 0 0.00
MS step iron in 20mm diameter MS steel bars
and fixing into walls of man hole/septic tank
duly embedded in cement concrete (1:3:6)
complete as per specification and direction of the
Engineer in charge.
645 1.13 Filling in foundation and plinth with excavated 0 0.00 0 0.00
materials, moorum including watering and
ramming as directed by the Engineer in charge
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
647 1.14 Supplying all materials, labour, T&P and 0 0.00 0 0.00
constructing soakway pit of the following size
with dry brick walling from bottom upto invert of
inlet pipe and 1st class Fly ash brickwork in
cement mortar (1:6) for the remaining height at
top, cement concrete (1:4:8) using 40mm size
hg chips on bed, 12mm thick cement plaster
(1:4) inside and outside over masonry
brickwork, gravel backing in the rear of well
steining, RCC cover slab in cement concrete
(1:2:4) using 12mm size hg chips fitted with
iron lifting handles including earthwork in open
well excavation in all kinds of soil and refilling of
cavity around the pit & painting the iron works,
watering, curing, conveyance of all materials to
worksite, payment of royalty, taxes etc all
complete as per approved specification and
direction of the Engineer in charge
648 0 Brick masonry soakway pit 1.50m dia x 2.50m 0 2.00 22924.45 45,848.90
649 J. Solar Water Heating System of 1000 Ltrs 0 0.00 0 0.00
650 1 Supply of Solar flat plate Collectors. of make 0 10.00 22125 2,21,250.00
Supreme Solar/Greentek India/ Radient Energy
or equivalant as per direction of Engineer in
651 2 Supply of input 7.5 Kw output 35Kw 0 1.00 413000 4,13,000.00
250LPD/Hr Air Source Heat Pump of make
Thermex/Brio/Neo or equivalant as per direction
of Engineer-in-Charge.
652 3 Supply of Hot Water insulated pressurized 0 1.00 354000 3,54,000.00
Storage Tank made out of stain less steel
SS304grade–1 nos. 1000 ltrs capacity of make
Parkland/Radient or equivalant as per direction
of Engineer-in-charge.
653 4 Supply of Non return valve and SS fittings., 2 0 1.00 94400 94,400.00
nos of Circulation cum pressure pump of make
WILO/ GROUNDFOUS with 4 nos Electrical
Backup Heater(5KW) internal Kitech pipes and
fittings, 40 nos MS power coated Stand for fixing
of solar plates etc. as per requirement at siteetc
complete as per direction of Engineer-in-charge
654 5 Installation of all the above materials on the roof 0 1.00 94400 94,400.00
including fitting and fixing of Insulated tank,
circulating pump, back-up heater, piping
arrangement etc complete with functioning of
solar water heating system etc complete as per
standard specification and direction of
Engineerin-charge
655 0 Sub-Total of Plumbing Works 0 0.00 0 17765121.14
656 III. Electrical Works 0 0.00 0 0.00
657 0 INTERNAL ELECTRICAL ,10KVA UPS,250 KVA DG 0 0.00 0 0.00
658 A Sub-Head I (Modular Wiring Items) 0 0.00 0 0.00
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
659 1 Recessed wiring to light point/ fan point/ 0 0.00 0 0.00
exhaust fan point/ call bell point with 1.5 sq.mm
FRLSH/LSZH PVC insulated copper conductor of
ISI marked Make- Finolex/ Anchor/ Polycab
/HAVELLS/RR KABLE/KEI or equivalent reputed
make A category ISI marked as approved with
20 mm dia PVC flexible non metallic conduit
FRLS type ISI marked Make-AKG/Anchor/
Havells or equivalent reputed make A category
ISI marked as approved 6A modular type (anti
bacterial & flame retardant type) switch ISI
marked Make-Schneider (Zencelo)/legrand(
Arteor) /Panasonic (vision) or equivalent reputed
make & model A category ISI marked as
approved, and ceiling rose ISI marked Make-
Anchor/Havells of modular type G.I box with
metallic cover plate (both side) (anti bacterial &
flame retardant type) Make-Schneider
(Zencelo)/ legrand( Arteor) /Panasonic (vision)or
equivalent reputed make & model A category ISI
marked as approved of suitable size, modular
box with 1.5 sq. Mm FRLSH PVC insulated single
core multi standard copper conductor as earth
wire including all accessories and connection as
per direction of Engineer -in -Charge. CATEGORY
AS FOLLOWS ,complete suitable for IPH
standard hospital. All the switches & sockets
should be warranted for a replacement period of
2 years against defects with necessary test
report & Warranty certificate to be submitted to
the department for genuineness of product & to
avail free after sales service within warranty
period for acceptance of materials.
663 2 Group control of point in Recessed wiring to 0 0.00 0 0.00
light point/ fan point/ exhaust fan point/ call bell
point with 1.5 sq.mm FRLSH/LSZH PVC
insulated copper conductor of ISI marked Make-
Make- Finolex/Anchor/Polycab/HAVELLS or
equivalent reputed make A category ISI marked
as approved as approved 20 mm dia PVC
flexible non metallic conduit FRLS type ISI
marked Make-AKG/Anchor/Kinjal or equivalent
reputed make A category ISI marked as
approved with 6A modular type((anti bacterial &
flame retardant type)) switch ISI marked Make-
Schneider (Zencelo)/ legrand( Arteor)
/Panasonic (vision) or equivalent reputed make
& model A category ISI marked as approved,
and ceiling rose ISI marked Make-
Schneider(Zencelo)/legrand( myrius) /Panasonic
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
664 0 (Equivalent model) or equivalent reputed make Nos 56.00 1211.86 67,864.16
& model A category ISI marked as approved of
modular type G.I box with metallic cover plate
(both side)(anti bacterial & flame retardant type)
Make-Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision)or equivalent reputed make &
model A category ISI marked as approved, of
suitable size, modular box with 1.5 sq. Mm FRLS
PVC insulated single core multistandard copper
conductor as earth wire including all accessories
and connection as per direction of Engineer -in -
Charge. CATAGORY AS FOLLOWS ,complete
suitable for IPH standard hospital.(Maximum 02
nos point in one circuit).All the switches &
sockets should be warranty for a replacement
period of 10 years against defects with
necessary test report & Warranty certificate to
be submitted to the department for genuinity of
product & to avail free after sales service within
warranty period for acceptance of materials.
665 3 Supplying ,fixing of 6A Plug on the same board Nos 100.00 227.74 22,774.00
in existing switch board with complete fitting by
01 no of 6A switch & socket (modular type)(
(anti bacterial & flame retardant type)) & other
required accessories of ISI marked as approved
as per direction of Engg. -in -Charge. Make-
Schneider(Zencelo)/legrand( Arteor) /Panasonic
(vision) or equivalent reputed make & model A
category ISI marked as approved, complete
suitable for IPH standard hospital.(Maximum 02
nos point in one circuit).All the switches &
sockets should be warranty for a replacement
period of 2 years against defects with
necessary test report & Warranty certificate to
be submitted to the department for genuinity of
product & to avail free after sales service within
warranty period for acceptance of materials.
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
666 4 Supplying, fixing of 6A Plug on the separate Nos 120.00 599.44 71,932.80
board with complete fitting by 01 no of 6A
switch & socket(modular type)( (anti bacterial &
flame retardant type)) with suitable size
modular box & cover(anti bacterial & flame
retardant type) including supplying of all
required accessories of ISI marked as
approved as per direction of Engg-in-charge.
Make-Schneider(Zencelo)/ legrand( Arteor)/
Panasonic (vision) or equivalent make & model
ISI marked as approved , complete suitable for
IPH standard hospital. (Maximum 02 nos point in
one circuit). All the switches & sockets should be
warranty for a period of 10 years against
manufacturing defects against which necessary
test report & Warranty certificate to be
submitted to the department for genuinity of
product & to avail free after sales service within
warranty period for acceptance of materials.
667 5 Supplying, fixing of 1x16A Plug on the separate Nos 45.00 761.1 34,249.50
board with complete fitting by 01 no of 16A
switch & socket(modular type)(anti bacterial &
flame retardant type) with suitable size modular
box & cover(anti bacterial & flame retardant
type) including supplying of all required
accessories of ISI marked as approved as per
direction of Engg-in-charge. Make-
Schneider(Zencelo)/ legrand( Arteor)/ Panasonic
(vision)or equivalent reputed make A category
ISI marked as approved, (For equipment
power)All the switches & sockets should be
warranty for a replacement period of 10 years
against defects with necessary test report &
Warranty certificate to be submitted to the
department for genuinity of product & to avail
free after sales service within warranty period
for acceptance of materials.
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
668 6 Supplying, fixing of 2x6A+1X1 6A Plug on the Nos 25.00 1629.58 40,739.50
separate board with complete fitting by 01 no of
16A+2 no 6A switch & socket (modular type) (
(anti bacterial & flame retardant type) with
suitable size modular box & metallic cover plate
(both side)(anti bacterial & flame retardant
type)including supplying of all required
accessories of ISI marked as approved as per
direction of Engg-in-charge. Make-
Schneider(Zencelo)/ legrand( Arteor)/ Panasonic
(vision) or equivalent reputed make & model A
category ISI marked as approved, (For
equipment power) complete suitable for IPH
standard hospital. (Maximum 02 nos point in one
circuit). All the switches & sockets should be
warranted for a replacement period of 10 years
against defects with necessary test report &
Warranty certificate to be submitted to the
department for genuinity of product & to avail
free after sales service within warranty period
for acceptance of materials.
669 7 Supplying, fixing of 3x6A+1X1 6A Plug on the Nos 20.00 2323.42 46,468.40
separate board with complete fitting by 01 no of
16A+3 nos 6A switch & socket(modular type) (
(anti bacterial & flame retardant type) with
suitable size modular box & metallic cover plate
(both side)(anti bacterial & flame retardant
type)including supplying of all required
accessories of ISI marked as approved as per
direction of Engg-in-charge. Make-
Schneider(Zencelo)/ legrand( Arteor) /Panasonic
(vision)or equivalent reputed make & model A
category ISI marked as approved, (For
equipment power)complete suitable for IPH
standard hospital.(Maximum 02 nos point in one
circuit).All the switches & sockets should be
warranted for a replacement period of 10 years
against defects with necessary test report &
Warranty certificate to be submitted to the
department for genuinity of product & to avail
free after sales service within warranty period
for acceptance of materials.
670 8 Recess wiring for circuit/sub main wiring with 0 0.00 0 0.00
the following mentioned size PVC FRLSH/LSZH
insulated, copper conductor, single core cable
(Finolex/Anchor/Polycab/ HAVELLS/RR KEBLE) or
equivalent reputed make A category ISI marked
as approved, in recessed PVC conduit Heavy
duty FRLS of mentioned size
(AKG/Anchor/Kinjal or equivalent ISI marked as
approved) as required as per direction of Engg.-
in-Charge. Necessary test report & Warranty
certificate to be submitted to the department for
genuinity of product & to avail free after sales
service within warranty period for acceptance of
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
671 a) 2 nos single core 1.5 sq. mm copper wire for Mtr 622.00 154.58 96,148.76
phase and neutral and 01 no of single core 1.5
sq. mm copper wire for earth continuity
conductor. In 20 mm dia non metallic heavy
duty flexible conduit (LDB to LSB/LIGHT
672 b) 2 nos single core 2.5 sq. mm copper wire for Mtr 568.00 171.1 97,184.80
phase and neutral and 01 no of single core 1.5
sq. mm copper wire for earth continuity
conductor in 20 mm dia non metallic heavy duty
flexible conduit.(BDB to LSB/LIGHT CKT/5A
PLUG/INVERTER POINT TO EACH QTR)
673 c) 4 nos single core 2.5 sq. mm copper wire for Mtr 640.00 310.34 1,98,617.60
phase and neutral and 02 nos of single core 2.5
sq. mm copper wire for earth continuity
conductor .in 25 mm dia non metallic heavy
duty flexible conduit(LDB to LSB/5A SOCKET)
674 d) 2 nos single core 4 sq. mm copper wire for Mtr 622.00 192.34 1,19,635.48
phase and neutral and 01 no of single core 1.5
sq. mm copper wire for earth continuity
conductor in 20 mm dia non metallic heavy duty
flexible conduit .(PDB to PSB/ GAYSER POINT/AC
POINT/ROOM LIGHT CONTROL TO CORRIDOOR
POINT/DG PANEL ESSENTIAL LOAD)
675 e) 4 nos single core 4 sq. mm copper wire for Mtr 320.00 289.1 92,512.00
phase and neutral and 02 nos of single core 2.5
sq. mm copper wire for earth continuity
conductor in 32 mm dia non metallic heavy duty
flexible conduit.(PDB to PSB/GAYSER. POINT/AC
POINT/DG PANEL ACCL TO EACH QTR
ESSENTIAL LOAD) (4X4+2X2.5)
676 f) 2 nos single core 6 sq. mm copper wire for Mtr 232.00 228.92 53,109.44
phase and neutral and 01 no of single core 2.5
sq. mm copper wire for earth continuity
conductor in 25 mm dia non metallic heavy duty
flexible conduit .(LFDB TO LBDB) (2X6+1X2.5)
677 g) 4 nos single core 6 sq. mm copper wire for Mtr 142.00 343.38 48,759.96
phase and neutral and 02 nos of single core 2.5
sq. mm copper wire for earth continuity
conductor in 32 mm dia non metallic heavy
duty flexible conduit.(LFDB TO LBDB/power
unit/point) (4X6+2X2.5)
678 h) 4 nos single core 10 sq. mm copper wire for Mtr 200.00 493.24 98,648.00
phase and neutral and 02 nos of single core 4
sq. mm copper wire for earth continuity
conductor in 32 mm dia non metallic heavy duty
flexible conduit .(LFDB TO FLOOR PANEL TO TPN
BDB light ) (4X10+2X4)
679 i) 4 nos single core 16 sq. mm copper wire for Mtr 160.00 746.94 1,19,510.40
phase and neutral and 02 nos of single core 10
sq. mm copper wire for earth continuity
conductor in 40 mm dia non metallic heavy duty
flexible conduit.(FLOOR PANEL TO TPN BDB
power) (4X16+2X10)
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
680 9 Supplying and fixing 20 amps, 240 volts, SPN, Nos 36.00 726.88 26,167.68
industrial type socket outlet, with 2 pole and
earth metal enclosed plug top along with 32
amps. C-series, SP MCB, in sheet steel
enclosure, on surface or in recess, with chained
metal cover for the socket outlet, and complete
with connections, testing and commissioning etc.
as required as per direction of Engg.-in-Charge..
. Make-Legrand/Schneider/Siemens/Panasonic or
equivalent reputed make & model A category ISI
marked as approved, All the Components should
be warranted for a replacement period of 5
years against defects with necessary test
report & Warranty certificate to be submitted to
the department for genuinity of product & to
avail free after sales service within warranty
period for acceptance of materials.
681 10 Supplying and fixing 32 amps, 415 volts, TPN, Nos 4.00 5128.28 20,513.12
industrial type socket outlet, with 4 pole and
earth metal enclosed plug top along with 32
amps. C-series, TP MCB, in sheet steel
enclosure, on surface or in recess, with chained
metal cover for the socket outlet, and complete
with connections, testing and commissioning etc.
as required as per direction of Engg.-in-Charge..
. Equivalent higher model of Make-
Legrand/Schneider/Siemens/Panasonic
equivalent reputed make & model A category ISI
marked as approved. All the Components should
be warranted for a replacement period of 5
years against defects with necessary test
report & Warranty certificate to be submitted to
the department for genuinity of product & to
avail free after sales service within warranty
period for acceptance of materials.
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
682 11 Supplying and fixing following size/ modules, GI 0 0.00 0 0.00
box along with modular base & metallic cover
plate (both side)(anti bacterial type) plate for
modular switches in recess etc as required as
per direction of Engg.-in-Charge. MAKE-
Legrand/Siemens/Anchor/Panasonic/ Schneider
or equivalent reputed make & model A category
ISI marked as approved .All the Components
should be warranted for a replacement period of
5 years against defects with necessary test
report & Warranty certificate to be submitted to
the department for genuinity of product & to
avail free after sales service within warranty
period for acceptance of materials.
686 12 Supplying and fixing of following sizes of 0 0.00 0 0.00
medium class PVC FRLS conduit ISI marked
along with accessories in surface/recess
including cutting the wall and making good the
same in case of recessed conduit as required as
per direction of Engg.-in-Charge .MAKE KINJAL/
AKG/Anchor or equivalent reputed make A
category ISI marked as approved
689 13 Supply and fixing modular type indicator on the Nos 32.00 126.26 4,040.32
existing switch box/cover . Equivalent higher
Schneider/Hager/Siemens/Anchor/Panasonic
make or equivalent reputed make & model A
category ISI marked as approved as required as
per direction of Engg.-in-Charge. All the
Components should be warranted for a
replacement period of 5 years against defects
with necessary test report & Warranty certificate
to be submitted to the department for genuinity
of product & to avail free after sales service
within warranty period for acceptance of
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
690 14 Supplying and installation of AC starter Modular Nos 36.00 730.42 26,295.12
type, Equivalent higher model of
Schneider/Hager/Siemens/Anchor/Panasonic
make or equivalent reputed make & model A
category ISI marked as approved coil voltage-
415 Volt A.C. & O/L range of 9-14A range on
mod Box of suitable size including modular cover
as required as per direction of Engg.-in-Charge
.All the Components should be warranted for a
replacement period of 5 years against defects
with necessary test report & Warranty certificate
to be submitted to the department for genuinity
of product & to avail free after sales service
within warranty period for acceptance of
691 15 Supply and fixing CALL bell (Ding dong type) Nos 10.00 241.9 2,419.00
/Buzzer on the existing switch box/cover.
Equivalent higher model of
Schneider/Hager/Siemens/Anchor/Panasonic
make or equivalent reputed make & model A
category ISI marked as approved .as required
as per direction of Engg.-in-Charge. All the
Components should be warranted for a
replacement period of 5 years against defects
with necessary test report & Warranty certificate
to be submitted to the department for genuinity
of product & to avail free after sales service
within warranty period for acceptance of
692 16 S/F of Bakelite angle holder/batten holder (make- EACH 34.00 71.98 2,447.32
Anchor/Havells/Panasonic or equivalent reputed
make A category ISI marked as approved )of
ISI marked conforming to IS-1258/1987 in
place of ceiling rose as per direction of Engg.-in-
Charge .All the Components should be
warranted for a replacement period of 5 years
against defects with necessary test report &
Warranty certificate to be submitted to the
department for genuinity of product & to avail
free after sales service within warranty period
for acceptance of materials.
693 17 Supplying, fixing of Blanking plate(modular Nos 32.00 49.56 1,585.92
type)( (anti bacterial & flame retardant type)) in
existing switch box(anti bacterial & flame
retardant type) including supplying of all
required accessories of ISI marked as
approved as per direction of Engg-in-
charge..Make-Schneider(Zencelo)/legrand(
Arteor) /Panasonic (vision), complete suitable
for IPH standard hospital. It should be
warranted for a period of 10 years against
manufacturing defects against which necessary
test report & Warranty certificate to be
submitted to the department for genuinity of
product & to avail free after sales service within
warranty period for acceptance of materials.
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
694 B Sub-Head II (Light fitting Fixture & Fan) 0 0.00 0 0.00
695 18 Supplying, installation, of exhaust fan of heavy Nos 24.00 3683.96 88,415.04
duty 300 mm sweep (Make-Equivalent higher
model with 5 star rated of
Havells/almonard/Anchor/Panasonic/Usha or
equivalent reputed make & model A category ISI
marked as approved ) of exhaust fan in the
existing wall, including fixing & connection as
required as per direction of Engg.-in-Charge.
Replacement Warranty will be 5 years.
696 19 Supplying, installation, of exhaust fan of heavy Nos 24.00 4334.14 1,04,019.36
duty 380 mm sweep 1400 rpm with louvers
Make-Equivalent higher model with 5 star rated
of Havells/almonard/Anchor/Panasonic/Usha or
equivalent reputed make & model A category ISI
marked as approved ) of exhaust fan in the
existing wall, including fixing & connection .as
required as per direction of Engg.-in-Charge.
Replacement Warranty will be 5 years.
697 20 Supplying, installation, testing and Nos 47.00 2607.8 1,22,566.60
commissioning of 1400 mm sweep white/milky
colour ceiling fan Make-Equivalent higher model
with 5 star rated of
Havells/almonard/Anchor/Panasonic/Usha or
equivalent reputed make & model A category ISI
marked as approved ) including wiring the down
rod of standard length (up to 30 cm) with 1.5 sq
mm PVC insulated, copper conductor, single core
cable etc. as required.(With fan Regulator) as
required as per direction of Engg.-in-Charge.
Replacement Warranty will be 5 years.
698 21 Supplying, installation, testing and Nos 128.00 2505.14 3,20,657.92
commissioning of 1200 mm sweep white/milky
colour ceiling fan Make-Equivalent higher model
with 5 star rated of
Havells/almonard/Anchor/Panasonic/ Ushaor
equivalent reputed make & model A category ISI
marked as approved ) including wiring the
down rod of standard length (up to 30 cm) with
1.5 sq mm PVC insulated, copper conductor,
single core cable etc. as required as per
direction of Engg.-in-Charge, Replacement
Warranty will be 5 years.. .(With fan Regulator)
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
699 22 Supplying and fixing of Energy efficient No 132.00 3158.86 4,16,969.52
Recess mounted LED luminaries made up of
CRCA powder coated sheet steel housing of
595 X 595 mm x 70 mm size with of not more
than 25W and system lumens output not less
than 3250 lumens (130 lm/ wt) with diffusers
for better light transmission and pure effect with
High luminous flux LEDs for better light output,
CRI not less than 80, CCT of 5700-6500 degree
K, THD less than 10%,internal surge protection
of 3 KV, complete with Non integrated isolated
electronic driver (protects the output
/secondary side from any disturbance on the
input / primary side ensuring safe operation)and
all other accessories suitable for operation
on140- 270 V, 50 Hz ,L70 @50,000 burning hrs
(5 years warranty)supply .as required as per
direction of Engg.-in-Charge (Make:
Panasonic/LT/Trilux /Philips/Wipro or equivalent
reputed make & model A category ISI marked
as approved.) . The luminaries must be
Replacement Warranty will be 5 years.
700 23 Supplying and fixing of Energy efficient Nos 36.00 6615.08 2,38,142.88
recessed mounted LED luminaries made up of
CRCA powder coated housing, Top opening clean
room LED luminaries of 600 X 600 x 65 mm
size with of 45 W and system lumens output not
less than 4500 lumens , IP65 ,dust free & zero
maintenance , anti glare high transmittance
PMMA diffuser , operating voltage range 150-
265 V, high performance potentiometric
electronic driver for zero maintenance , 2.5 KV
internal urge protection, L70 B 50: 50,000 hrs.,
CRI not less than 80, CCT of 5700-6500 degree
K, THD less than 10%,,IP 65 protection
complete with all other accessories suitable for
operation on 230 V, 50 Hz supply as required as
per direction of Engg.-in-Charge. (Make:
Panasonic /PHILIPS/ Wipro or equivalent reputed
make & model A category ISI marked as
approved ) .The luminaries should be
Replacement Warranty will be 5 years. .Each
CLEAN ROOM FITTING FOR OT ICU MRI CT.
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
701 24 Supplying and fixing of Energy efficient Nos 320.00 1791.24 5,73,196.80
surface mounted square shape 20 W LED
luminaries of dimension of 225x 225 x 35 mm
consists of white powder coated , die-cast
Alluminium housing with high quality frosted
diffuser for glare-free uniform lighting
distribution with wattage not more than 20 watt
and lumen output of 1500 lumens, , CRI not less
than 80,CCT of 6000 degree K,THD less than
10%, with electronic driver, internal surge
protection of 2.5 KV , L70 B50: 30000 hrs (2 yrs
warranty) and all other accessories suitable for
operation on 220 V to 240 V supply as required
as per direction of Engg.-in-Charge. ( Make :
Panasonic /Trilux/Osram/PHILIPS/Wipro or
equivalent reputed make & model A category ISI
marked as approved).The luminaries should be
Replacement Warranty will be 5 years
702 25 Supplying and fixing of Energy efficient Nos 200.00 2865.04 5,73,008.00
recess mounted LED luminaries with white
powder coated ,pressure die-cast Al housing
,with high transmititivity,non-yellowing PMMA
diffuser, with wattage not more than 20 watt
and lumen output not less than 2600 Lumen (
130 lumens/watt ) of size 595 x595 x 70 mm ,
,CRI not less than 80,CCT of 5700-6500 degree
K,THD less than 10%, with Non integrated
isolated driver (protects the output /secondary
side from any disturbance on the input / primary
side ensuring safe operation), all other
accessories , life : 50,000 burning hours (5
years warranty) , Internal surge protection of 3
KV suitable for operation on 230 V, 50 Hz
supply as required as per direction of Engg.-in-
Charge. ( Make : Panasonic / LT /Wipro/PHILIPS
or equivalent reputed make & model A category
ISI marked as approved.) The luminaries should
be Replacement Warranty will be 5 years.
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
703 26 SITC of energy efficient LED tube light fittings Nos 32.00 940.46 30,094.72
with decorative aluminum batten and LED tube
light having power rating not more than 20 watt
and lumen output not less than 2200 lumen
complete with electronic driver and all other
accessories with diffuser having 5 years
warranty i/c connection etc as required as per
direction of Engg.-in-Charge. (Similar to
Panasonic/PHILIPS/LT/Wipro or equivalent
reputed make & model A category ISI marked
as approved.). The luminaries should be
Replacement Warranty will be 5 years .
704 27 SITC of Sleek LED 10 watt mirror light fitting Nos 16.00 863.76 13,820.16
with extruded polycarbonate housing, High
optically efficient diffuser, above wash basin
complete with all accessoriesetc. directly on wall,
including connection with 1.5 sq. mm FRLS PVC
insulated, copper conductor, single core cable
and earthing etc. as required as per direction of
Engg.-in-Charge.
( Make : WIPRO / PHILIPS/Panasonic or
equivalent reputed make & model A category ISI
marked as approved. )The luminaries should be
Replacement Warranty will be 5 years
705 28 SITC of IP 20 Non-integral flexible LED strip Nos 8.00 1792.42 14,339.36
light, High optically efficient diffuser,, 4000K
with 12 w/mtr @ 5Mtr pool with Driver extra as
required as per direction of Engg.-in-Charge (
Make : Panasonic PHILIPS/Wipro or equivalent
reputed make & model A category ISI marked
as approved. )The luminaries should be
Replacement Warranty will be 5 years
706 29 Supplying and fixing of small focus light for Nos 20.00 3307.54 66,150.80
small monuments as 30W , 5700 K required as
per direction of Engg.-in-Charge Make :
Panasonic/PHILIPS/LT/WIPRO or equivalent
reputed make & model A category ISI marked
as approved.)The luminaries should be
Replacement Warranty will be 5 years
707 30 Supplying and fixing extra conduit down rod of Nos 255.00 38.94 9,929.70
20 cm length G.I. pipe 15 mm dia, heavy gauge
including painting etc. as required as required as
per direction of Engg.-in-Charge .
(Note : More than 5 cm length shall be rounded
to the nearest 10 cm and 5 cm or less shall be
ignored)of ISI mark as approved.
708 C BDBS,DB,AC DB,FLOOR PANELS,MCBS 0 0.00 0 0.00
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
709 31 Supplying and fixing of following mentioned 0 0.00 0 0.00
way, three pole/single pole and neutral, sheet
steel, double door MCB distribution board, 415
volts/240 volts shall be as per IEC 61439-
3,integrated door earthing system offering
additional safety to the user, High quality
polyurethane Gasket, the box and cover shall be
fabricated to withstand IK09,the DB should be
properly pre-treated with 7 tank process and
duly powder coated, phosphatized with powder
coated finish, on surface/recess, complete with
terminal blocks, with suitable size FR PVC
insulated copper conductor up to terminal
blocks, tinned copper bus bar, neutral bus bar,
earth bar, din bar. Make-LEGRAND-Ekinox3 DB/
Siemens-Betaguard/ Schneider- Acti
9/Panasonic(Equivalent model) /ABB(Equivalent
model) or equivalent reputed make & model A
category ISI marked as approved. as per
direction of Engg.-in-Charge. The Distribution
boards should be Replacement Warranty will be
710 a) 4 Way(8+12) Way TPN MCB DD DB Horizontal Nos 13.00 2558.24 33,257.12
Type as per IEC 61439-3 suitable for Flush
mounting and Surface mounting with 100A
Copper Bus Bar for each phase, with neutral Bus
bar, Earth Bar & Cable ties for cable
management, profited masking sheet, IP43-IK09
with metal door(FOR LIGHT,POWER INDOOR,3-
PH,POWER LOAD) Warranty on DB is 2 years.
711 b) Supply and fixing of 12 way DD single pole and Nos 12.00 2249.08 26,988.96
neutral sheet steel MCB distribution board 250V
on surface/recess complete with tinned copper
bus bar, neutral bus bar, earth bar, din bar,
detachable gland plate, interconnections,
phosphatized and powder painted including
earthing etc. as required (but with out MCB/
RCCB/ Isolator) (ALL LIGHT WITH
CORRIDOOR/COMMON AREA,EM LIGHT,UPS
LOAD, EM LOAD LIGHT LOAD,POWER LOAD )
712 c) 2+4 way MCB Enclosure DB (GLAZED Nos 7.00 1926.94 13,488.58
door)(only each EM. CONNECTION UPS LOAD)
713 d) 8 Way(8+24) Way TPN MCB DD DB Horizontal Nos 13.00 3188.36 41,448.68
Type as per IEC 61439-3 suitable for Flush
mounting and Surface mounting with 100A
Copper Bus Bar for each phase, with neutral Bus
bar, Earth Bar & Cable ties for cable
management, profited masking sheet, IP43-IK09
with metal door(FOR LIGHT,POWER INDOOR,3-
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
714 32 Supplying and fixing 20 amps rating, 240 volts, Nos 7.00 392.94 2,750.58
C series, Double poles MCB of Make-LEGRAND-
Ekinox3 DB/ Siemens-Betaguard/ Schneider-
Acti 9/L&T (Equivalent
model)/Panasonic(Equivalent model)
/ABB(Equivalent model) or equivalent reputed
make & model A category ISI marked as
approved in the existing MCB DB complete with
connections as per direction of Engg.-in-Charge.
The MCB should be Replacement Warranty will
be 5 years .MCB should have the fault indication
system in different colour for ON, OFF & TRIP
condition or Mid trip position for Trip conditions
for easier identification of fault. Warranty on
MCB is 5 years.
715 33 Supplying and fixing 6 amps to 32 amps rating, Nos 388.00 155.76 60,434.88
240 volts, C series, single poles MCB of Make-
LEGRAND-Ekinox3 DB/ Siemens-Betaguard/
Schneider- Acti 9/L&T (Equivalent
model)/Panasonic(Equivalent model)
/ABB(Equivalent model) or equivalent reputed
make & model A category ISI marked as
approved. the existing MCB DB complete with
connections as per direction of Engg.-in-Charge.
The MCB should be Replacement Warranty will
be 5 years.MCB should have the fault indication
system in different colour for ON, OFF & TRIP
condition or Mid trip position for Trip conditions
for easier identification of fault. Warranty on
MCB is 5 years.
716 34 Supplying and fixing 40 Amps rating, TPN, 415 Nos 12.00 2650.28 31,803.36
volts, RCCB,300mA .Make-Equivalent higher
model of Legrand/Schneider/Siemens /
L&T/Panasonic /ABB or equivalent reputed
make & model A category ISI marked as
approved in the existing MCB DB complete with
connections, testing and commissioning etc. as
required as per direction of Engg.-in-Charge.
.(4W TPN BDB IC)AC ODU CONTROLLER). The
RCCB should be Replacement Warranty will be 5
717 35 Supplying and fixing 25Amps DP 240 volts, Nos 10.00 1991.84 19,918.40
RCCB,300mA Make-Equivalent higher model of
Legrand/Schneider/Siemens / L&T/Panasonic
/ABBor equivalent reputed make & model A
category ISI marked as approved in the existing
MCB DB in the existing MCB DB complete with
connections as per direction of Engg.-in-Charge.
The RCCB should be Replacement Warranty will
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
718 36 Supplying and fixing 40Amps DP 240 volts, Nos 7.00 2272.68 15,908.76
RCCB,300mA Make-Equivalent higher model of
Legrand/Schneider/Siemens / L&T/Panasonic
/ABB or equivalent reputed make & model A
category ISI marked as approved in the existing
MCB DB in the existing MCB DB complete with
connections as per direction of Engg.-in-Charge.
The RCCB should be Replacement Warranty will
719 37 Supplying and fixing 63Amps DP 240 volts, Nos 14.00 2619.6 36,674.40
RCCB,300mA Make-Equivalent higher model of
Legrand/Schneider/Siemens / L&T/Panasonic
/ABB or equivalent reputed make & model A
category ISI marked as approved in the existing
MCB DB in the existing MCB DB complete with
connections as per direction of Engg.-in-Charge.
The RCCB should be Replacement Warranty will
720 38 Supplying and fixing 63Amps TPN 415 volts, Nos 14.00 3116.38 43,629.32
RCCB,300mA Make-Equivalent higher model of
Legrand/Schneider/Siemens / L&T/Panasonic
/ABB or equivalent reputed make & model A
category ISI marked as approved in the existing
MCB DB in the existing MCB DB complete with
connections as per direction of Engg.-in-
Charge.(for power BDB & AC ODU, 8 way TPN
BDB IC).The RCCB should be Replacement
Warranty will be 5 years
721 d) (Earthing) INSTALLATION 0 0.00 0 0.00
722 39 S/IT/C Of Earthing with copper earth plate 600 Nos 4.00 16398.46 65,593.84
mm x 600mm x 6 mm thick ISI marked
including accessories and providing masonry
with cover plate having locking arrangement and
watering pipe etc (WITH charcoal and salt) as
required as per direction of Engg.-in-Charge.
The entire earthing system should be
Replacement Warranty will be 5 years
723 40 S/IT/C of materials and installation of pipe earth Nos 6.00 2954.72 17,728.32
electrode made out of 50mm dia class B G.I.
pipe of 3.0 metre long with arrangements for
fitting/ termination of G.I. flat / wire with G. I.
nut bolts & washers including cost of burnt
wood charcoal, salt, foreign soil, water pouring
arrangements, brick masonry enclosure on top
with removable RCC cover complete with labour
for excavation of pit in all kinds of soil & rock as
required and as per direction of Engineer-in-
charge. The entire earthing system should be
Replacement Warranty will be 5 years
724 41 Providing and fixing 4 mm dia copper wire on Mtr 320.00 113.28 36,249.60
surface or in recess for loop earthing as
required. As per direction of Engg.-in-Charge.
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
725 42 Providing and fixing 25mm x 5 mm copper strip Mtr 35.00 1293.28 45,264.80
on surface or in recess for connections etc. as
required as per direction of Engg.-in-Charge.
726 43 Providing and fixing 50mm x 5 mm copper strip Mtr 20.00 2394.22 47,884.40
on surface or in recess for connections etc. as
required as per direction of Engg.-in-Charge.
727 44 Supplying and making brick masonry pedestal Mtr 2.00 3197.8 6,395.60
with extra super structure including cement
plastering etc as required as per direction of
Engg.-in-Charge.
728 E CABLING AND END TERMINATION MAIN AREA 0 0.00 0 0.00
729 45 Supplying of one number PVC insulated armored 0 0.00 0 0.00
and PVC sheathed XLPE property AL. conductor
power cable of 1.1 KV grade
POLYCAB/HAVELLS/Finolex or equivalent reputed
make ISI marked as approved of following size
cables as per direction of Engg.-in-Charge.
Necessary test report & Warranty certificate to
be submitted to the department for genuinity of
product & to avail free after sales service within
warranty period for acceptance of materials
732 46 Supplying of one number PVC insulated armored 0 0.00 0 0.00
and PVC sheathed XLPE property AL. conductor
power cable of 1.1 KV grade
POLYCAB/HAVELLS/Finolex or equivalent reputed
make ISI marked as approved of following size
cables as per direction of Engg.-in-Charge.
Necessary test report & Warranty certificate to
be submitted to the department for genuinity of
product & to avail free after sales service within
warranty period for acceptance of materials
733 a) 3.5core x 95 sq mm ( FOR FDB 1F,2F, POWER ) Mtr 35.00 560.8658 19,630.30
734 b) 4core x 16 sq mm (FDB LIGHT 1 RUN UPTO 1F ) Mtr 35.00 171.8198 6,013.69
735 c) 4 core x 4 sq mm (for small power) Mtr 35.00 103.6866 3,629.03
736 d) 3.5core x 35 sq mm (To FDB LIGHT / power Mtr 35.00 257.7238 9,020.33
BDB/UPS PANEL, separate panel for OT
737 47 LAYING OF CABLE 0 0.00 0 0.00
738 a) Laying of PVC Insulated PVC Seated /XLPE Mtr 24.00 153.4 3,681.60
power cable of 1.1 kv grade size not exceeding
25 SQ. MM direct in ground in the trench in one
horizontal formation including excavation ,sand
coushing protection covering and refilling the
trench etc as required as per direction of Engg.-
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
739 b) Laying of PVC Insulated PVC Seated /XLPE Mtr 160.00 171.1 27,376.00
power cable of 1.1 kv grade size exceeding 25
SQ. MM but not exceeding 120 SQ. MM direct in
ground in the trench in one horizontal formation
including excavation ,sand coushing protection
covering and refilling the trench etc as required
as per direction of Engg.-in -charge.
740 c) Laying of PVC Insulated PVC Seated /XLPE Mtr 114.00 189.98 21,657.72
power cable of 1.1 kv grade size exceeding
120 SQ. MM but not exceeding 400 SQ. MM
direct in ground in the trench in one horizontal
formation including excavation ,sand coushing
protection covering and refilling the trench etc
as required as per direction of Engg.-in -charge.
741 d) Laying of PVC Insulated PVC Seated /XLPE Mtr 45.00 49.56 2,230.20
power cable of 1.1 kv grade size not exceeding
25 SQ. MM direct in ground in the EXISTING
PIPE etc as required as per direction of Engg.-in -
742 e) Laying of PVC Insulated PVC Seated /XLPE Mtr 35.00 68.44 2,395.40
power cable of 1.1 kv grade size exceeding 25
SQ. MM but not exceeding 400 SQ. MM direct in
ground in the EXISTING PIPE etc as required as
per direction of Engg.-in -charge.
743 f) Laying of PVC Insulated PVC Seated /XLPE Mtr 35.00 54.28 1,899.80
power cable of 1.1 kv grade size not exceeding
25 SQ. MM in open duct etc as required as per
direction of Engg.-in -charge.
744 g) Laying of PVC Insulated PVC Seated /XLPE Mtr 32.00 54.28 1,736.96
power cable of 1.1 kv grade size exceeding 25
SQ. MM in open duct 400 SQ. MM direct in
ground in the EXISTING PIPE etc as required as
per direction of Engg.-in -charge.
745 h) Laying of PVC Insulated PVC Seated /XLPE Mtr 42.00 95.58 4,014.36
power cable of 1.1 kv grade size not exceeding
25 SQ. MM in surface with saddle and screw etc
as required as per direction of Engg.-in -charge.
746 i) Laying of PVC Insulated PVC Seated /XLPE Mtr 32.00 151.04 4,833.28
power cable of 1.1 kv grade size not exceeding
120 SQ. MM From 25 SQ. MM in surface with
saddle and screw etc as required as per direction
of Engg.-in -charge.
747 j) Laying of PVC Insulated PVC Seated /XLPE Mtr 14.00 154.58 2,164.12
power cable of 1.1 kv grade size not exceeding
400 SQ. MM From 120 SQ. MM in surface with
saddle and screw etc as required as per direction
of Engg.-in -charge.
748 48 Supplying and making end termination with 0 0.00 0 0.00
brass compression gland and aluminum lugs for
following mentioned size cable. As per direction
of Engg.-in-Charge.
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
754 49 Providing, fixing and laying of following dia G.I. 0 0.00 0 0.00
pipe (medium class) in ground complete with G.I
fitting incl. trenching(75 mm depth)and refilling
as per direction of Engg.-in-Charge.
756 50 Providing, fixing and laying of fallowing dia HDPE 0 0.00 0 0.00
pipe (medium class) in ground complete with
fitting incl. trenching(75 mm depth)and refilling
as per direction of Engg.-in-Charge.
759 0 MAIN CONTROL PANEL 0 0.00 0 0.00
760 51 S/I/T&Commissioning of LT indoor floor mounted 0 0.00 0 0.00
cubical type electrical main panel (for both light
and power circuit) made out by 2mm CRCA steel
sheet duly derusted & painted by Siemens gray
powder cote paint is designed as G.A drawing
as per direction of Engg.-in-Charge.Warrentee
period of replacement of panel & accessories
must be 5 years & complete test certificate must
be submitted along with panel board including
component list.
Icu=100%Ics,0, LSIG MCCB with micro
processor based release Electrical locking for
normal & DG (make-
ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI
marked)(HVAC & MEDICAL EQUIPEMENT) (200
KVA TRANSFORMER)
Icu=100%Ics, 0 LSIG MCCB with micro
processor based release with adjustable
overload from 36%-100% & Electrical locking for
normal & DG (make-
ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI
marked) along with 01 no of 400A 4P onload
changeover switch (125 KVA DG 01 NO)
763 0 Busbar-1&2 04 numbers of 500Amps Aluminium 0 0.00 0 0.00
bus bar with 1A/SQ.MM current caring capacity.
bus bar duly sleeved by color coated PVC sleeve
& supported by suitable size DMC insulator. (for
764 0 Out going- 08 numbers of 63A 4P MCB (make- 0 0.00 0 0.00
Legrand or equivalent reputed make ISI
marked)BDB P/AC,(timer panel & water supply
management,,FIRE,WTP,STP & GF POWER)
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
765 0 Out going- 10 numbers of 125A 4P 0 0.00 0 0.00
Icu=50%Ics, LSIG MCCB withTMR based release
with adjustable overload (make-
LEGRAND/Schneider/ABB/Siemens, ISI
marked)(FLOOR RAW POWER PANEL ,SPARE,DG
PANEL OF OT COMPLEX & MCU,AC )
766 0 Out going- 3 numbers of 250A 4P Icu=50%Ics, 0 0.00 0 0.00
LSIG MCCB withTMR based release with
adjustable overload (make-
LEGRAND/Schneider/ABB/Siemens, ISI
marked)(FLOOR RAW POWER PANEL ,SPARE,DG
PANEL OF OT COMPLEX & MCU,AC )
767 0 Out going- 6 numbers of 32A 4P MCB ((make- 0 0.00 0 0.00
ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI
marked)(LIGHT SUPPLY)
768 0 Instrument- (i) 03 numbers phase indicating 0 0.00 0 0.00
lamp with toggle switch & HRC fuse.
769 0 (ii) 02 set of digital type multifunction meter 0 0.00 0 0.00
with CT for voltage,current,frequency,PF,THD
indication with RS 485 COMPACTIVITY FOR bms
770 0 (iii) 4 nos of 65kA SP VSD WITH 32A SP MCB 0 0.00 0 0.00
773 52 S/I/T&Commissioning of LT indoor floor mounted 0 0.00 0 0.00
cubical type electrical main panel (for both light
and power circuit) made out by 2mm CRCA steel
sheet duly derusted & painted by Siemens grey
powder cote paint is designed as G.A drawing.
(FOR ALL MAIN CONNECTED LOAD) BUILDING
LIGHT)as per direction of Engg.-in-Charge.
Warrantee period of replacement of panel &
accessories must be 5 years & complete test
certificate must be submitted along with panel
board including component list.
774 0 In comer- 01 no 63A 4P MCB 10kA,C series 0 0.00 0 0.00
with on/off trip indication Light load for each
floor. ( Make-LEGRAND-Ekinox3 DB/ Siemens-
Betaguard/ Schneider- Acti 9/L&T (Equivalent
model)/Panasonic(Equivalent model)
/ABB(Equivalent model)or equivalent make with
proper model ISI marked)
775 0 Busbar- 04 numbers of 63Amps,50kA 0 0.00 0 0.00
Electrolytic copper bus bar duly sleeved by color
coded PVC sleeve & supported by suitable size
776 0 Out going- 06 nos 32A 2P MCB 10kA,C series 0 0.00 0 0.00
UPS Light load for each area UBDB. ( Make-
LEGRAND-Ekinox3 DB/ Siemens-Betaguard/
Schneider- Acti 9/L&T (Equivalent
model)/Panasonic(Equivalent model)
/ABB(Equivalent model)or equivalent make with
proper model ISI marked)
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
777 0 Instrument- (i) 03 numbers phase indicating 0 0.00 0 0.00
lamp with toggle switch & HRC fuse.
778 0 (ii) 01 set of 0-60Amps Ammeter with 0 0.00 0 0.00
CTS.(DIGITAL) (Sicure/ L&T,CT-KAPPA or
equivalent make & model)
.(DIGITAL)(Sicure/L&T or equivalent make &
781 0 FDB RAW POWER AT 1F,2F-4F 0 0.00 0 0.00
782 53 S/I/T&Commissioning of LT indoor floor mounted 0 0.00 0 0.00
cubical type electrical main panel (for both light
and power circuit) made out by 2mm CRCA steel
sheet duly derusted & painted by Siemens grey
powder cote paint is designed as G.A drawing.
(FOR ALL MAIN CONNECTED LOAD) BUILDING
POWER/AC)as per direction of Engg.-in-Charge.
Warrantee period of replacement of panel &
accessories must be 5 years & complete test
certificate must be submitted along with panel
board including component list.
783 0 In comer- 01 no 125A 4P MCCB 25kA, with 0 0.00 0 0.00
ROM & S. Link. (make-
ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI
marked)(Icu=100%Ics)with shunt trip. With
auxiliary for BMS or equivalent make.
784 0 Busbar- 04 numbers of 125Amps,50kA 0 0.00 0 0.00
Electrolytic copper bus bar duly sleeved by color
coded PVC sleeve & supported by suitable size
785 0 Out going- 04 nos 63A 4P MCB 10kA,C series 0 0.00 0 0.00
for power BDB. ( Make-LEGRAND-Ekinox3 DB/
Siemens-Betaguard/ Schneider- Acti 9/L&T
(Equivalent model)/Panasonic(Equivalent model)
/ABB(Equivalent model)or equivalent make with
proper model ISI marked)
786 0 Out going- 02 nos 32A 4P MCB 10kA,C series 0 0.00 0 0.00
for Extra power BDB. ( Make-LEGRAND-Ekinox3
DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T
(Equivalent model)/Panasonic(Equivalent model)
/ABB(Equivalent model)or equivalent make with
proper model ISI marked)
787 0 Instrument- (i) 03 numbers phase indicating 0 0.00 0 0.00
lamp with toggle switch & HRC fuse.
CTS.(DIGITAL)(Sicure/L&T,CT-KAPPA or
equivalent make & model)
790 0 UPS PANEL FOR OT,ICU & OTHER 0 0.00 0 0.00
EMERGENCY(COMMON & OT COMPLEX,MCU
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
791 54 S/I/T&Commissioning of LT indoor floor mounted 0 0.00 0 0.00
cubical type electrical main panel (for both light
and power circuit) made out by 2mm CRCA steel
sheet duly derusted & painted by Siemens grey
powder cote paint is designed as G.A drawing.
(FOR ALL MAIN CONNECTED LOAD) BUILDING
EMERGENCY LIGHT)as per direction of Engg.-in-
Charge. Warrantee period of replacement of
panel & accessories must be 5 years & complete
test certificate must be submitted along with
panel board including component list.
792 0 In comer- 01 numbers of 63 Amps 4P 0 0.00 0 0.00
ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI
marked)(Icu=50% Isc) with shunt trip &
auxiliary for BMS & mechanical inter locking for
one incomer source to other.
793 0 Busbar- 04 numbers of 100Amps Electrolytic 0 0.00 0 0.00
copper bus bar duly sleeved by color coded PVC
sleeve & supported by suitable size DMC
794 0 Out going- 04 nos 32A 2P MCB UPS Light load 0 0.00 0 0.00
for each floor.
795 0 Out going- 03 nos 32A 4P MCB OT/ICU 0 0.00 0 0.00
POWER/OT MACHINE OR Bed head panel
796 0 Instrument- (i) 03 numbers phase indicating 0 0.00 0 0.00
lamp with toggle switch & HRC fuse.
797 0 (ii) 01 set of 0-100Amps Ammeter Digital type 0 0.00 0 0.00
& CTS.(DIGITAL)
798 0 (iii) 01 set of 0-500 voltmeter Digital 0 0.00 0 0.00
799 0 NB- This panel should have proper earth by 0 0.00 0 0.00
suitable rated copper flat.
801 G UPS SYSTEM (For OT,ICU & COMMON AREA) 0 0.00 0 0.00
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
802 55 Supply ,installation ,testing & commissioning of Set 2.00 236000 4,72,000.00
10KVA UPS SYSTEM WITH suitable size battery
bank, rated of battery , IGBT based inverter
system with inbuilt isolation transformer &
automatic phase sicuency corrector of 3ph in
put to 3 ph output,415V,protection for fault by
OL,UV,EF,GF,OC,Ph. Sicuency release of
equivalent model of Numeric/ RELLIO/ Emersion
or equivalent reputed make A category, ISI
marked as approved ) including supply of rack
inverter stand with sufficient backup up to 30
minutes with all required accessories to
complete the job including all connection. LOAD
OF OT,ICU,BLOOD BANK) as per direction of
Engg.-in-Charge. Warrantee period of all
accessories & component & system must be 2
years & complete test certificate must be
submitted along with ups including component
803 0 CABLE TRAY /RACE WAY FOR DISTRIBUTION OF 0 0.00 0 0.00
804 56 HOT DIPP GALVANIZED(GC) AS PER EN-ISO- Mtrs 45.00 702.1 31,594.50
1461 , CARBON STEEL WIRE MESH CABLE
TRAYS with internal dimensions of size
54mm(H) x 200mm(W), of Legrand - Cablofil
make or equivalent reputed make & model A
category, ISI marked as approved .The Load
bearing capacity of the Cable Trays should be
minimum of 104.8Kg/meter at the span of
1.5Meter as per UL specifications.(With all
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required as per direction of
Engg.-in-Charge. Warrantee period of tray must
be 5 years & complete test certificate must be
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
805 57 HOT DIPP GALVANIZED(GC) AS PER EN-ISO- Mtrs 24.00 814.2 19,540.80
1461 , CARBON STEEL WIRE MESH CABLE
TRAYS with internal dimensions of size
54mm(H) x 300mm(W), of Legrand - Cablofil
make or equivalent reputed make & model A
category, ISI marked as approved .The Load
bearing capacity of the Cable Trays should be
minimum of 104.8Kg/meter at the span of
1.5Meter as per UL specifications.(With all
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required as per direction of
Engg.-in-Charge. Warrantee period of tray must
be 5 years & complete test certificate must be
806 58 HOT DIPP GALVANIZED(GC) AS PER EN-ISO- Mtrs 45.00 1077.34 48,480.30
1461 , CARBON STEEL WIRE MESH CABLE
TRAYS with internal dimensions of size
54mm(H) x 400mm(W), of Legrand - Cablofil
make or equivalent reputed make & model A
category, ISI marked as approved .The Load
bearing capacity of the Cable Trays should be
minimum of 104.8Kg/meter at the span of
1.5Meter as per UL specifications.(With all
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required as per direction of
Engg.-in-Charge. Warrantee period of tray must
be 5 years & complete test certificate must be
807 59 GALVANIZED(GC) AS PER EN-ISO-1461 , FLOOR Mtrs 67.00 2102.76 1,40,884.92
RACE WAY WITH JUNCTION with internal
dimensions of size 38mm(H) x 225mm(W), of
reputed make ISI marked as approved .(With
all accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required as per direction of
Engg.-in-Charge.(3 COMPARTMENT TOTAL 54
MM HEIGHT,COST WITHOUT GST,WITH LESS
DISCOUNT(REPUTED FACTORY MADE ISI
808 0 INSTALLATION OF 1X250KVA DG ONLY FOR 0 0.00 0 0.00
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
810 60 Supply, Transportation, erection, testing and 0 0.00 0 0.00
commissioning of 3 Phase, 415V, 50Hz, water
cooled multi cylinder diesel generator set with
alternator of 250KVA ( Make -Kirloskar / Jakson
/ sterling) out put continuous rating directly
coupled Engine and Alternator with guard and
mounted on a common base plate of Robust
construction and complete with AMF panel
having IP-52 protection, Acoustic Enclosure as
per CPCB norms , sound absorbing material, to
restrict sound level up to 75 dB up to 1 mtr
distance and as per CPCB norms etc as per
following specifications mentioned below.
A. Alternator make : Kirloskar / Stamford /
Crompton Greaves / Leroy Somer /Caterpillar or
equivalent reputed make & model ISI marked as
approved as per direction of Engg.-in-Charge.
Warrantee period of panel must be 5 years &
complete test certificate must be submitted
along with DG set including component list &
smoke exhaust system drawing, certified ISO
811 0 ALTERNATOR: The alternator of the output 0 0.00 0 0.00
rating shall be 3 Phase, 415V, 50Hz, Ac , 0.8
P.F. lagging at 1500 RPM. The alternator is self
excited, self regulated, and shall confirm to IS:
13364 of 1992 with regulation of +5% from no
load to full load. degree of protections shall be
812 0 ENGINE: Diesel Engine make : Kirloskar / 0 0.00 0 0.00
Cummins / Caterpillar / Perkins /Volvo penta
/Ashok Leyland / Mahindra & Mahindra /
Greaves Cotton /Tata or equivalent make &
model ISI marked as approved . Diesel Engine
start, developing suitable BHP output at 1500
RPM with mechanical / electronic governing so
as to enable the alternator to give 250KVA
continuous output at 0.8 P.F. lagging at NTP
conditions. The diesel engine shall be capable of
providing 10% O/L for 1 Hr for every 11 Hrs of
continuous running at full load. The engine with
1st filling of oil and Diesel etc.
01. Exhaust pipe of required size and length with
insulation or cladding.
02. Diesel tank suitable for 8 to 10 Hours
running capacity.
03. Residential Silencer.
04. SMF Batteries with leads as per the
Manufacturer standards
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
813 0 AMF PANEL: Cubical, Compartmentalized, AMF 0 0.00 0 0.00
Panel Board with all Power & Control
Contractors, Switches, Meters and other
accessories, Internal Wiring, connection, inter-
connection etc. for Trouble Free smooth function
for250KVA DG Set complete with Battery
Charger & leads as required.
814 0 BASE PLATE: Common Base Plate of required 0 0.00 0 0.00
size for mounting of Engine Alternator Set
fabricated from MS Channel and vibration
damping arrangement with cushy floor mounting
including painting etc. as required.
815 0 FOUNDATION: Suitable size Cement Concrete Set 1.00 2787819.62 27,87,819.62
(1:2:4) foundation duly plastered and finished
with neat coat Cement as required along with
smoke exhaust system piping including base
frame of structure & lightening protection
system. *It also includes 2 nos GI pipe earthing
for body and 2 nos copper plate earthing for
neutral, control cable of 15mtr 2.5sqmm 6core ,
civil foundation work.
(The Manufacturing of DG set shall not in any
case be more than six months old from the date
of award of work)
816 0 20 PASSENGER HOSPITAL LIFT WITH 0 0.00 0 0.00
817 61 Design Supply, Installation, Testing & 0 0.00 0 0.00
Commissioning and putting into operation with
complete inspection by concerned electrical
inspector, Director Factory and Boilers, Odisha
with proper testing certificate and final testing
of Automatic Lift complete with all standard
equipments accessories and control equipments
as per Manufacturer's Design with lift control
panel including BMS facility and as per BIS and
fulfilling following requirements. It includes
supply, laying of power cable and fixing of
glands, lugs etc.( Machine room less, Gearless
Type).Design and as per CPWD /OPWD
specification (Part - III Lifts) 1981 with valid
license for installation and fulfilling following
requirements on turnkey basis as per direction
of Engg.-in-Charge. LIFT OF machine room less
Kone/Johnson/OTIS/Schindler/ThyssenKrupp or
equivalent reputed make & model A category,
ISI marked as approved )Warrantee period of
accessories & system must be 5 years &
complete test certificate must be submitted
along with Lift including component list .
818 0 Type: HOSPITAL PASSENGER LIFT 0 0.00 0 0.00
820 0 Speed: 1.0 Meter Per Second. 0 0.00 0 0.00
821 0 Control: Variable voltage with variable frequency 0 0.00 0 0.00
822 0 Operation: Microprocessor based simplex 0 0.00 0 0.00
collective selective with / without Lift Attendant.
823 0 Total Rise: About 8 Meters. 0 0.00 0 0.00
824 0 Landings: For All on same side. 0 0.00 0 0.00
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
825 0 Floors Served: GF,1F,2F,3F,4F 0 0.00 0 0.00
826 0 Signals: Digital Car Position Indicator, Car Travel 0 0.00 0 0.00
direction Indicator in Car & at all Landings.
827 0 Lift Shaft Size: About as 20 passenger lift 0 0.00 0 0.00
standard, finished with Plaster.
828 0 Lift Car Size: About lift standard. 0 0.00 0 0.00
829 0 Car Entrance: Clear Opening lift standard high 0 0.00 0 0.00
Protected with Car Door.
830 0 Landing Entrance: Clear Opening lift standard 0 0.00 0 0.00
high Protected with Landing Door.
831 0 Car Door: Stainless with front glass to 0 0.00 0 0.00
transparent Two Panel Center opening flush
type. Outer visible.
832 0 Landing Door: Mild Steel Two Panel Center 0 0.00 0 0.00
opening flush type P.
833 0 Door Operation: Automatic Electric Power 0 0.00 0 0.00
operated Door with in infrared protection.
834 0 Car Interior: Stainless Steel Panel with Hair line 0 0.00 0 0.00
finish on all sides.
835 0 Car Floor: Hard Wood covered with PVC / 0 0.00 0 0.00
836 0 Car Ceiling & Lighting: Fluorescent Lighting 0 0.00 0 0.00
Concealed by suspended false ceiling with plain
acrylic diffuser. The frame of suspended false
ceiling shall be of powder coated Aluminum.
837 0 Car Ventilation: Pressure Fan with anodized 0 0.00 0 0.00
Aluminum Grill.
838 0 Emergency Lighting in Car: Battery operated 0 0.00 0 0.00
Emergency Lighting in the Lift Car.
839 0 Intercom System: Battery operated intercom 0 0.00 0 0.00
system in Lift Car and Control Room.
840 0 Emergency Alarm: Battery operated Alarm Bell 0 0.00 0 0.00
System in Lift Car and Control Room.
841 0 Position of Machine Room: Directly above the 0 0.00 0 0.00
842 0 Electric Power Supply: AC 415 Volt 3 Phase 50 0 0.00 0 0.00
Hz terminated in control room along with control
panel with facility of BMS connectivity system
.The scope of lift control panel is inclusive with
lift vender scope.
843 0 OTHER SPECIAL PROVISIONS 0 0.00 0 0.00
844 0 • VVVF CONTROLLER 0 0.00 0 0.00
845 0 • AUTOMATICE RESCUE DEVICE (ARD) 0 0.00 0 0.00
846 0 • EMERGENCY LIGHT AND BATARY OPERATED 0 0.00 0 0.00
847 0 • DOT MATRICKX SEVEN SIGMENT DIGITAL 0 0.00 0 0.00
POSITION INDICATORS
848 0 • FIRE RATED DOOR FOR 1 HOUR 0 0.00 0 0.00
849 0 • 3 WAY INTER COM/PRESS AND SPEAK 0 0.00 0 0.00
BUTTON WITH HAND SET
850 0 • FLOOR ANNUNCIATOR WITH MUSIC 0 0.00 0 0.00
851 0 • INFRA RED SCREEN 0 0.00 0 0.00
852 0 • OVER LOAD WARNING INDICATOR 0 0.00 0 0.00
853 0 • BRAILLE BUTTONS 0 0.00 0 0.00
854 0 • FREE SERVICE FOR 5 YEARS 0 0.00 0 0.00
856 0 • FULL CAR HEIGH CAR FIXTURE ARRIVAL 0 0.00 0 0.00
857 0 • PROVISION FOR CC CEMARA WITH 0 0.00 0 0.00
858 0 Fire Man Switch: Fire Man Switch at Main Job 3.00 2994948.56 89,84,845.68
Landing Terminal.
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
859 0 EXTERNAL ELECTRICAL 0 0.00 0 0.00
860 1 Supplying, Erection, Fixing, connection & testing Sets 24.00 3779.54 90,708.96
of LED BOUNDRY WALL Light of elegant look
Panasonic/philips/wiproor equievalant reputed
make & model A catogory, ISI marked as
approved 35 W LED street light having die cast
aluminium housing with toughened glass having
lumen efficacy of 110 lm/w or more (As per LM
79 report of third party NABL lab) ,IP 65
protection or more , LED street light model will
be vide Panasonic/Philips/LT/ WIPRO make or
equievalant reputed make A catagory ISI
marked as approved having warrantied for a
period of 5 years . The luminaire should be
supplied along with bracket maintenance free
for inspection as required as per direction of
Engg.-in-Charge.
861 2 Supplying, Erection, Fixing, connection & testing Sets 4.00 11952.22 47,808.88
of Panasonic 40 LED GATE Light of Panasonic /
Philips/LT/WIPRO or equievalant reputed make
A catagory ISI marked as approved
maintenance free having 2 years warranty G.I P
ipe with braket including MCB box & including
with foundation as per the Drawing for
inspection as required & as per direction of
Engg.-in-Charge.
862 3 Supply of materials and installation of pipe earth Nos 4.00 2954.72 11,818.88
electrode made out of 50mm dia class B G.I.
pipe of 3.0 metre long with arrangements for
fitting/ termination of G.I. flat / wire with G. I.
nut bolts & washers including cost of burnt
wood charcoal, salt, foreign soil, water pouring
arrangements, brick masonary enclosure on top
with removable RCC cover complete with labour
for excavation of pit in all kinds of soil & rock as
required and as per direction of Engineer-in-
charge.The entire earthing system should be
Replacement Warranty will be 5 years
863 4 Providing and fixing 4 mm dia copper wire on Mtr 106.00 113.28 12,007.68
surface or in recess for loop earthing as required
as per direction of Engg.-in-Charge.
864 5 Providing and fixing 25mm x 5 mm copper strip Mtrs 13.00 1293.28 16,812.64
on surface or in recess for connections etc. as
required as per direction of Engg.-in-Charge.
865 6 S/I/T&Commissioning of LT OUT DOOR FLOOR Set 1.00 2411.92 2,411.92
mounted cubical type MCB ENCLOSURE made
out by 2mm CRCA steel sheet duly derusted &
pented by simens gray powder cote paint is
designed as G.A drawing. (FOR USE) with 20A
TPN MCB 01 NO Legrand/ Schneider/ L&T/ ABB
or equievalant make & model as per direction of
Engg.-in-Charge. Ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to avail
free after sales service within warranty period 2
years of acceptance of materials
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
866 7 Supplying,laying of 3cx2.5 sq.mm copper Mtrs 195.00 125.08 24,390.60
flexible cable with insulated cover of reputed
make,ISI marked with all other concerned
materials as per direction of Engg.-in-Charge.
Ncessary test report & Warrnaty certificate to be
submitted to the department for genuinity of
product & to avail free after sales service within
warranty period for acceptance of materials
867 0 (LIGHTENING CONDUCTOR) 0 0.00 0 0.00
868 8 AIR TERMINAL & ACCESSORRIES LIGHTNING Nos 20.00 454.3 9,086.00
ARRESTER+ MAST:
Providing and fixing of lightning conductor finial
made of 25 mm dia 300 mm long, G.I
tube,having single prong at top, with 85 mm dia
3 mm thick G.I base plate including holes etc
complete as required with as per direction of
Engg.-in-Charge.(RATE REFERING OSR 2018
SOR NO-4.2) .The entire LA system should be
Replacement Warranty will be 5 years
869 9 Reveting, sweating and soldering of copper / Mtrs 55.00 166.38 9,150.90
G.I. tape ( with another copper / G.I. tape, base
of the finial or any other metallic object) as
required .as per direction of Engg.-in-Charge.
(RATE REFERING OSR 2018 SOR NO-4.4) The
entire LA system should be Replacement
Warranty will be 5 years
870 10 Providing and fixing of G.I. tape 20 mm x 3 mm Mtrs 55.00 69.62 3,829.10
thick on parapet or surface of wall for lightning
conductor complete as required. (For horizontal
run) as per direction of Engg.-in-Charge.(RATE
REFERING OSR 2018 SOR NO-4.7) The entire
LA system should be Replacement Warranty will
871 11 Providing and fixing of G.I. tape 20 mm x 3 mm Mtrs 55.00 114.46 6,295.30
thick on parapet or surface of wall for lightning
conductor complete as required. (For virtical
run) as per direction of Engg.-in-Charge. (RATE
REFERING OSR 2018 SOR NO-4.8) The entire LA
system should be Replacement Warranty will be
872 12 Providing and fixing of testing joint, made of 20 Each 20.00 74.34 1,486.80
mm x 3 mm thick G.I. strip, 125 long with 4 nos
of G.I. bolts, check nuts and spring washer etc
complete as required as per direction of Engg.-in-
Charge. (RATE REFERING OSR 2018 SOR NO-
4.12) The entire LA system should be
Replacement Warranty will be 5 years
873 13 Providing and laying of G.I. tape 32 mm x 6 mm Mtrs 20.00 107.38 2,147.60
from earth electrode directly in ground as
required as per direction of Engg.-in-Charge.
.(RATE REFERING OSR 2018 SOR NO-4.14) The
entire LA system should be Replacement
Warranty will be 5 years
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
874 14 Maintenance free Safe Earthing Electrodes with Set 3.00 16531.8 49,595.40
ISI G.I. pipe dia 75mm as Secondary electrode
with wall thickness of 2.6 mm and the Primary
Earthing Electrode will be 50mm X 6mm X 1no
M.S. hot dipped galvanized strip filled with a
highly conductive & non-corrosive compound in
between the Primary Earthing and the secondary
Earthing, the Surface Area in will be
7,06,500sqmm for 3mtrs length and Cross
Sectional Primary conducting area is 300 sq.mm.
An Solid G.I. Base plat seals the unit at the
bottom. as per direction of Engg.-in-Charge.
(MES-GFC ground Filling compound will be
provided in 25 kgs Bags.)(MES-GFC ground
Filling compound will be provided in 25 kgs
Bags.)(2 bags required for each earthing
electrode.)(FOR lightening protection & Building
Electrification).The entire earthing system
should be Replacement Warranty will be 5
years.Make-OBO/Star-x/ABB or equievalant
reputed make & model A catogory.
875 0 Sub-Total of Electrical Works 0 0.00 0 20824297.47
877 0 Variable Refrigerant Volume / Flow Air- 0 0.00 0 0.00
conditioning System (Heating & Cooling both)
878 1 Supply, installation, testing and 0 0.00 0 0.00
commissioning of Variable Refrigerant Flow
modular type air-conditioning system
suitable for Cooling & Heating both by multiple
scroll compressor controlled by individual
inverter complete with indoor and outdoor units
with individual wired and wireless/wired remote
controller for indoor units and centralized
controller, interconnecting refrigerant piping, full
charge of refrigerant gas (R-410A) & oil,
internal control cabling and fittings etc. as per
details given in specifications & instructions of
EICs and having following items. The out door
units shall be suitable for 3 phase 4 wire
system, 415V + 10 %, 50 Hz AC supply and
indoor shall be suitable for Single phase 220-
240V, 50 Hz AC supply.
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
879 0 Outdoor Units 0 0.00 0 0.00
880 0 Supply, installation, testing & commissioning of 0 0.00 0 0.00
Modular type outdoor units equipped with highly
efficient scroll compressors(OEM manufactured)
fully inverter controlled i.e. changes its speed in
accordance to the variation in cooling loads,
special heat exchanger, low noise condenser fan,
& including full charging of R-410A refrigerant
gas complete i/c powder coating complete as per
specifications & instructions of EICs. Out door
units shall be provided with MS stand of suitable
size duly painted with corision resistant paint
suitable for outdoor application. The units should
be with necessary weather protection
coating.The hydrophilic coating should be done
before / after bringing the units to site. Out
door units shall be provided with MS stand of
suitable size duly painted with corision resistant
paint suitable for outdoor application.
881 0 The units shall be in combination of one or more 0 0.00 0 0.00
units which shall be selected in such a way that
COP of each unit at 100 % shall not be less than
3.75 and 75% part load shall not be less than
4.40 on standard operating conditions i.e on 35
Deg C DB Ambient and at 27 Deg CDB & 19 Deg
CWB inside conditions.Outdoor Unit Shall be
suitable for working in minimum 51 deg. C
882 0 All the units shall be provided with built-in 0 0.00 0 0.00
microprocessor control panel, for automatic
operation and capacity control,which should be
air / refrigerant cool. Machines shall be suitable
for working with BMS system.
883 0 It is mandatory that each compressor shall have 0 0.00 0 0.00
inverter technology separately i.e. outdoor units
shall have all inverter based compressor.
Make:Hitachi, Ogeneral , Mitshubishi Electric,
Daikin,LG,Carrier .
884 0 Following capacities of ODUs are at standard 0 0.00 0 0.00
operating condition as defined above and Vendor
to indicate COP at 100% load & at part loads i.e.
75% & 50% in the data sheets/ shop
drawings.Complete in all respect as required at
site or as per EIC instruction
886 0 VRF DX based AHU FM & CSU 0 0.00 0 0.00
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
887 2 SITC of Unloading, shifting, Storage, Supply, 0 0.00 0 0.00
installation, testing and commissioning of double
skin, double deck type ceiling suspended / Floor
Mounted air handling unit with 40 mm thick
panels( CSU will have 20 mm thick panel) with
thermal break ( NO thermal break for CSU )
construction consisting of G.I casing of thickness
0.6 mm outside layer and 0.6 mm inside layer
with 275 GSM zinc coating, comprising of
mixing box, Prefilter section with 10 micron
filters, fresh air / return air/ bleed air / coil
bypass / supply air dampers, cooling coil section
with 4/6/ row chilled dx cooling coil, SS 304
insulated drain pan, Fan + motor section with
Backward curved and other accessories as
required to complete the installation, fine filter
section with 5 micron filters, air discharge
plenum. All the AHUs shall include D.O.L/Star-
delta starter (upto 7.5HP DOL, above 7.5HP star
delta), . Fresh air for all AHUs mentioned here
under will be 4 ACPH of specified room volume
and coils to be sized accordingly and all AHUs to
be controlled with OT (control panel) remote
controller, the quote should include complete
with suitable DOL / Star Delta Electrical Panel,
15 RMT suitable electrical cabling, Earthing,
control cabling etc., in total to make complete
set AHU smooth operation Client will Provide
single point 3 phase power supply at AHU starter
panel location with all control valves and
889 b) 2200 CFM / 7 TR / 55 MM Static for ICU and Nos 2.00 285560 5,71,120.00
890 3 SITC of refenet Nos 4.00 7080 28,320.00
891 0 REFRIGERANT COPPER PIPING & DRAIN PIPE: 0 0.00 0 0.00
892 4 Supplying & Installation of interconnecting 0 0.00 0 0.00
following sizes of Refrigerant copper pipe work
of following outer diameter, insulated with 13/19
mm , Nitrile Rubber insulation (fire retardent
Class "O") insulation in tubing form inclusive of
factory laminated ALU cladding as per
specifications & instructions of EIC Refrigerant
piping shall be laid on GI covered cable trays.
Entire refrigerant piping work be carried out
in accordance with the specifications &
instructions of EICs. (Make:
Rajco,Mandev,Hindustan).Copper Piping shall be
of following sizes:
893 a) 9.5 mm dia with 13mm thick rubber insulation Rmt 130.00 586.2948 76,218.32
Soft or Semi Hard
894 b) 12.7 mm dia with 13mm thick rubber insulation Rmt 70.00 428.4462 29,991.23
Soft or Semi Hard
895 c) 15.9 mm dia with 13mm thick rubber insulation Rmt 60.00 1121.0472 67,262.83
Soft or Semi Hard
896 d) 22.2 mm dia with 19mm thick rubber insulation Rmt 10.00 1391.6448 13,916.45
897 e) 28.6mm dia with 19mm thick rubber insulation 1 Rmt 10.00 2097.1314 20,971.31
898 0 CONDENSATE DRAIN PIPING 0 0.00 0 0.00
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
899 5 Supply & installation, testing and commissioning 0 0.00 0 0.00
of Rigid heavy class Schedule 40 UPVC piping
complete with fittings, supports as per
specifications & instructions of EICs and duly
insulated with 6 mm thick XLPE tubular
insulation with factory laminated 7 mill glass
901 0 DUCTING, GRILLS, DIFFUSER AND 0 0.00 0 0.00
903 6 Supply, installation, balancing and 0 0.00 0 0.00
commissioning of fabricated at site GSS sheet
120 GSM metal rectangular/round ducting
complete with neoprene rubber gaskets, elbows,
splitter dampers, vanes, hangers, supports etc.
as per approved drawings and specifications &
instructions of EICs of following sheet thickness
complete as required.Sheet Make - Sail Jindal
904 a) Thickness 0.63 mm sheet (24 Guage) Smqtr 180.00 1463.2 2,63,376.00
905 b) Thickness 0.80 mm sheet (22 Guage) sqmtr 150.00 1876.2 2,81,430.00
906 0 DUCTING & ACCESSORIES 0 0.00 0 0.00
907 7 Supply, erection, testing & commissioning of Al. 0 0.00 0 0.00
Ducting fabricated at site, complete with turning
vanes, collars, reducers as per IS - 655 (Class -
910 8 Supply, installation, testing and commissioning Smtr 2.00 11614.74 23,229.48
of GI volume control duct damper complete with
neoprene rubber gaskets, nuts, bolts, screws
linkages, flanges etc., as per specifications &
instructions of EICs.
911 9 Supplying & fixing of powder coated extruded Sqmtr 2.00 5310 10,620.00
aluminium Supply Air Grills with aluminium
volume control dampers as per specifications &
instructions of EICs.
912 10 Supplying & fixing of powder coated extruded Sqmtr 2.00 4012 8,024.00
aluminium Return Air Grills with louvers but
without volume control dampers complete as
913 11 Supplying and fixing of following thickness duly 0 0.00 0 0.00
laminated aluminum foil of mat finish closed cell
Nitrile rubber (Class “O”) insulation on existing
duct after applying suitable adhesive for Nitrile
rubber. The joints shall be sealed with 50 mm
wide and 3 mm thick self adhesive nitrile rubber
tape insulation complete as per specifications &
instructions of EICs and as required.
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
915 12 Supplying, Fixing, testing and commissioning of 0 0.00 0 0.00
fire dampers of at least 1½ hour fire rating as
per UL555/1995 tested by CBRI,in supply air
duct/main branch and return air path as and
where required of required sizes, i/c control
wiring,the damper shall be motorized and spring
return so as to close the damper in the event of
power failure automatically and open the same
in case of power being restored. The spring
return action shall be inbuilt mechanism and not
externally mounted. The damper shall also be
closed in the event of fire signal. Damper blades
shall be airfoil shaped (equivalent to 2.3mm
thickness strength) roll formed using 0.8mm
thick single piece of galvanized sheet. Fire
damper shall be equipped with a electric limit
switch to indicate open and close position of the
damper blades. The dampers shall meet the
requirements of NFPA90A, 92A and 92B and
shall be classified as Leakage Class 2 smoke
damper in accordance with latest version of
UL555S. Each fire/smoke damper shall be AMCA
licensed and bear the AMCA seal for air
Performance. Pressure drop shall not exceed
7.5Pa when tested at 300m/min face velocity on
600x600mm size damper. Actuator shall be UL
listed complete as required and as per
specifications & instructions of EICs.
916 a) Fire damper(150 mm deep) Sqmtr 1.00 14160 14,160.00
917 b) Control Panel with actuator(10Nm Torque) & Nos 4.00 10667.2 42,668.80
918 13 Supply, installation testing and commissioning of 0 0.00 0 0.00
duct acoustic insulationInside the Duct with
Engineered Nitrile Rubber open cell foam with
Density 140 - 180 Kg/m3 passing Class 1 Fire
Performance test as per BS 476 Part 7, Air
Erosion test or 10,000 fpm air velocity as per
ASTM C 1071-05 to be applied using
manufacturer's recommended Rubber based
Adhesive in a blend of solvents.
919 a) 10 mm thick duct acoustic lining Sqmtr 40.00 1834.9 73,396.00
920 14 Commissioning of VRF systems including Lot 1.00 41300 41,300.00
Nitrogen Flushing etc.
921 15 SITC OF R410 Gas Charging Top Up. Kg 30.00 1711 51,330.00
922 0 Cable & Termination 0 0.00 0 0.00
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
923 16 Supply, laying, dressing, testing 0 0.00 0 0.00
and commissioning of 1100V grade,
XLPE aluminum/copper conductor, galvanized
steel wire/strip armored, PVC sheathed power
and control cables of conductor, galvanized
steel wire/strip armored, PVC sheathed power
and control cables of Termination of
power and control cables with and
including supply of nickel plated double
Compression brass cable glands, crimping
type lugs, PVC tapes etc. for following size
cable quantities to be laid on trays/
wall/racks including clamping as per
specifications.
924 a 4c x 10 sq.mm cable copper armored Mtr 40.00 1224.84 48,993.60
925 b 4c x 4 sq.mm cable copper armored Mtr 60.00 769.36 46,161.60
927 17 Supply of AC with indoor and outdoor unit 0 0.00 0 0.00
928 a) 1.5 TR high wall split A.C 3Star Each 42.00 49560 20,81,520.00
(Make:Toshiba/Hitachi/Carrier/Diakin or eq.
929 0 REFRIGRANT PIPING 0 0.00 0 0.00
930 18 Supply,installation of hard/soft copper refregrant 0 0.00 0 0.00
piping,complete with fitting of bends and other
nesessary material to complete the job.
931 a) 1 TR to 3 TR high wall split A.C Mtr 90.00 988.84 88,995.60
933 19 Supply,installation & fabrication of MS base 0 0.00 0 0.00
frame for both indoor and outdoor unit and
other nesessary material to complete the job.
934 a) 1 TR to 3 TR high wall split A.C Nos 42.00 1984.76 83,359.92
936 20 Supply,installation & fabrication of Insulated 0 0.00 0 0.00
drain water piping from indoor to nearest drain
point separate to all and other nesessary
material to complete the job.
938 0 CONTROL CABLE 0 0.00 0 0.00
939 21 Supply, laying of control cable and other 0 0.00 0 0.00
nesessary material to complete the job.
940 a) For 1 TR to3 TR high wall split A.C Nos 200.00 145.14 29,028.00
941 0 Sub-Total of HVAC Works 0 0.00 0 6094725.25
942 V. FIRE FIGHTING 0 0.00 0 0.00
943 1 Supply , installation, testing & commissioning of Nos 2.00 380780.1 7,61,560.20
Motor driven end suction Back pullout type
Centrifugal pump delivering 2280 LPM at 56 Mtr
head with CI casing bronze impeller and SS
shaft with mechanical seal (for Wet riser &
Sprinkler system) with 2 pole TEFC motor
suitable for operation on 415 V ,3 ph, 50 C/s AC
supply and complying to TAC norms including
providing base frame coupling,coupling guard
as per direction of Engineer-in-charge
(Make:PUMP:KBL/ Grundfos / KSB/ Wilo)
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
944 2 Supply , installation, testing & commissioning of Nos 1.00 63707.02 63,707.02
Diesel Engine driven end suction Back pullout
type Centrifugal pump having 2280 LPM at 56
Mtr head with CI casing bronze impeller and SS
shaft with mechanical seal and suitable diesel
engine complying to TAC norms along with all
accessories including control wiring between
panel & DG set and fuel storage tank including
providing base frame coupling,coupling guard
as per direction of Engineer-in-
charge..(Make:PUMP:KBL/ Grundfos / KSB/Wilo)
945 3 Supply , installation, testing & commissioning of Nos 2.00 132160 2,64,320.00
Motor driven end suction Back pullout type
Centrifugal Jocky pump delivering 180 LPM at
60Mtr head with CI casing bronze impeller , SS
shaft with mechanical seal and 2 pole TEFC
electric motor suitable for operation on 415 V ,3
ph, 50 C/s AC supply including providing base
frame coupling,coupling guaaard as per
direction of Engineer-in-charge..(Make:Kirlosker/
Gunfoss / KSB/ wilo)
946 4 Supply,Installation,Testing & Commissioning of 0 0.00 0 0.00
dust and vermin proof front operated
compartmentalised cubicle type control panel
suitable for operation on 415 Volt, 3 ph, 50 c/s
power supply with 630 Amp TPN Aluminium
busbar fabricated out of 2 mm thick CRCA sheet
duly powder coated after treatment in 7 tank
process with top entry cable gland plate
including interconnections, earth bus as
required comprising of :
INCOMING: One(1)- 400 Amp 36 KA TP MCCB
with microprocessor release, O/L, S/C and E/f
release, Voltmeter with s/s, Ammeter with S/s, 3
Nos 400/5 metering CTs of Class 1.0, ON/ OFF
indicating lamps, 3 Nos Phase indicating lamp
and 4P 6A MCB
OUTGOING: a)Three(3)-250 Amp TP MCCB, with
star delta starter suitable for motor with O/L
release, ON/ OFF push button, ON/ OFF
indicating lamp, 3 Nos CTs metering CTs 250/5,
b) 2 No (Outgoing) – 63 Amp TP MCCB, with
star delta starter suitable for motor with O/L
release, ON/ OFF push button, ON/ OFF
indicating lamp,3nos 50/5 CT,Ammeter,S/S
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
947 0 c) 1 Set – Relay, Auto/ Manual Selector Switch, 0 0.00 0 0.00
Battery Charger, Annunciation Panel, Control
wiring of pressure switches, flow switches and
starters etc as required for auto and manual
operation of Jockey pumps, Main Electric Pumps
and Diesel Engine Pump as per direction of
Engineer-in-charge.d)1 lot control wiring from
pressure switch to panel board through auxiliary
contactor with 1.5 sq. mm unarmoured PVC
insulated ,PVC sheathed copper cable etc as
949 5 Supply, installation, testing and commissioning 0 0.00 0 0.00
of Floor/Wall mounted sectionalised, front
operated top entry dust and vermin proof
M.V.Panel Boards suitable for operation at 415V,
3 phase, 4 wire, 50Hz distribution system
fabricated out of 2.0 mm thick CRCA sheet,
insulated busbar with heat shrinkable PVC
sleeve, base frame, complete with all
accessories including interconnections, earth bus
etc as required comprising of.
One (1)- 63 Amp, 10 KA,TPN (Class-C) MCB
with 3 Nos Phase indicating lamps with control
fuse/ MCB, Digital Voltmeter with selector
switch. DOL starter with O/L and Single Phasing
Preventor suitable for motor. ON/OFF indication
lamps, Auto manual switch and ON/OFF push
950 0 One (1) - Set of Auxilliary relay for automatic 0 0.00 0 0.00
operation through pressure switch.
952 6 Supply & Laying of XLPE power cable of 1.1 KV 0 0.00 0 0.00
grade of following size on Cable
956 7 Supplying instalaltion hot dip galvanized ladder 0 0.00 0 0.00
type cable tray of following size including
installation along wall/ suspended from ceiling
with brackets/ threaded suspenders including
bends etc as required.
960 8 Laying & fixing of one no. PVC insulated and PVC 0 0.00 0 0.00
sheathed/XLPE power cable of 1.1 KV grade of
following size on Cable Tray as required.
962 b) Above 35 Sqmm and upto 95 sqmm Mtr 111.00 87.32 9,692.52
963 0 End Termination 0 0.00 0 0.00
964 9 Supply & Making end Termination with brass 0 0.00 0 0.00
compression gland and aluminium lugs for PVC
insulated and PVC sheathed cable of 1.1 kv
grade (without cost of Cable)
967 B PIPE & VALVES ETC. 0 0.00 0 0.00
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
968 10 Supply,Installation,Testing & Commissioning of 0 0.00 0 0.00
'C' Class heavy duty MS pipe (as per IS 1239
upto 150 mm NB and IS 3589 for above 150
mm 6.33mm thick) with flanges and fitting such
as bends, tees, reducers, rubber insertions and
galvanized nuts and bolts of following size on
surface along wall / shaft with MS bracket,
suspended from ceiling/ beam with suspenders
duly painted with two coats of primer and
finished with enamel paint of approved colour
laid through pipe or in trench after wrapping
with hassen cloth after applying coal tar primer
as required as per direction of Engineer-in-
978 11 Supply,Testing & Commissioning of 'C' Class 0 0.00 0 0.00
heavy duty MS pipe (as per IS 1239 upto 150
mm NB and IS 3589 for above 150 mm 6mm
thick) with flanges and fitting such as bends,
tees, reducers, rubber insertions and galvanized
nuts and bolts of following size including laying
in ground after excavation and refilling of trench
along with providing 4mm thick pipecoat for
underground pipe after applying wrapping
coating primer as required as per direction of
Engineer-in- charge.
980 12 Providing, fixing, testing and commissioning of 0 0.00 0 0.00
following size manually operated hand lever type
cast iron double flanged slim seal wafer type
Butterfly valves with EPDM iron disc as per IS-
13095 having pressure ratting PN -1.60
including fixing the same with supply of required
jointing materials like rubber insertion, MS nuts
& bolts, paint etc. and testing the joints with
required water pressure etc. all complete as per
specification & direction of E.I.C.
985 13 Providing, fitting & fixing of following size cast 0 0.00 0 0.00
iron double flanged type dual plate Non return
Valve as per IS- 5312 (Part 1): 2004 with ISI
mark of pressure ratting PN-1.60 including fixing
the same with supply of required jointing
materials like flanges, rubber insertion, MS nuts
& bolts, paint etc. and testing the joints with
required water pressure etc. all complete as per
specification & direction of Engineer-in-charge.
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
990 14 Supply,Installation,Testing & Commissioning of Nos 7.00 10158.62 71,110.34
orifice plate made of 6mm thick stainless steel
with orifice of required size in between flane and
landing valve of external and internal hydrant to
reduce pressure to working pressure of 3.5 Kg/
sq cm complete as required.
991 15 Supply,Installation,Testing & Commissioning of Nos 3.00 2370.62 7,111.86
Pressure gauge of 0-16 Kgf/sq.cm. range with
cut-off bronze ball valves of suitable size with all
accessories as per direction of Engineer-in-
992 16 Supply,Installation,Testing & Commissioning of Nos 3.00 3059.74 9,179.22
Pressure Switch with cut-off bronze ball valves
with integral strainer & flare nut (mixed ends) of
suitable size with all accessories as per direction
of Engineer-in-charge.
993 17 Supply,Installation,Testing & Commissioning of 0 0.00 0 0.00
stainless steel strainer fabricated out of 1.6 mm
thick stainless steel sheet Y Stainer with 3 mm
dia hloes with stainless steel flange as required.
995 18 Supply,Installation,Testing & Commissioning of Nos 2.00 30820.42 61,640.84
Air vessel made of 250mm dia, 8mm thick MS
sheet, 1200 mm in height with air release valve
on top and flanged connection to riser, drain
arrangement with 25 mm dia Gun metal wheel
valve, with required accessories, pressure gauge
and painting with synthetic enamel paint as
996 19 Supply,Installation,Testing & Commissioning of Nos 1.00 10384 10,384.00
150 NB C.I. PRV with matching flanges as per
direction of Engineer-in-charge.
997 20 Supply,Installation,Testing & Commissioning of Set 1.00 49530.5 49,530.50
150NB Alarm Valve , Water Motor Gong
Retarded Chamber, Flange to:- ANSI B 16. 1
Class 125/ANSI B16.5 Class 100, All
Components are UL Listed/FM Approved , Rated
pressure 17.50 kg/cm2, Test pressure 500PSI
confirming to IS :15105:2002 with ISI mark as
per direction of Engineer-in-charge.
998 C WET RISER SYSTEM 0 0.00 0 0.00
999 1 Supply,Installation,Testing & Commissioning of Nos 10.00 9545.02 95,450.20
Stainless steel Hydrant Valve / Landing valve, of
63 mm NB size, type-A, single headed , oblique
type, as per IS :5290/93 and as per direction of
Engineer-in-charge.
1000 2 Supply,Installation,Testing & Commissioning of Nos 10.00 4751.86 47,518.60
SS short branch pipe with 63 mm male inlet and
19 mm outlet nozzle, as per IS:903 and as per
direction of Engineer-in-charge.
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
1001 3 Supply,Installation,Testing & Commissioning of Nos 10.00 8343.78 83,437.80
63 mm NB and 15meter long RRL Fire Hose
fitted with 63mm intstantaneous stainless steel
male & female SS coupling, complete by GI wire
binding for Internal Hydrant as per direction of
Engineer-in-charge.
1002 4 Providing supply & fixing of MS Hose Box for of Nos 10.00 7008.02 70,080.20
suitable size(750X600X250mm) to accomodate
2 nos. of 15/ 1 no of 30 mtr long fire hose and a
branch pipe, wall mounted type as per direction
of Engineer-in-charge.
1003 5 Supply,Installation,Testing & Commissioning of Nos 10.00 11477.86 1,14,778.60
Swinging pattern wall fixing first aid hose reel
made from MS sheet and waterways and moving
parts with rubber hose of 20 mm dia. and 30
mtrs. long with ABS(Plastic) shut-off nozzle as
per IS: 444/IS: 12585 Type-I., complete with all
accessories as per direction of Engineer-in-
1004 6 Providing, fitting and fixing of C.I. 25 MM single Nos 1.00 1692.12 1,692.12
air relief valve with stop cock confirming to
IS:14845/2000 with ISI mark for water works
purpose including fixing the same with hydrant
riser including testing & commissioning the
system etc. all complete as per approved
specification & direction of Engineer-in-charge.
1005 7 Providing, fitting & fixing of 4-Way GM fire Nos 1.00 14916.38 14,916.38
brigade connection consisting of 63 mm dia
instantaneous type male couplings with built-in
check valves, 150mm dia flanged outlet
complete with bolts, nuts and rubber insertions
confirming to IS:904 with ISI mark including
testing & commissioning the system etc. all
complete as per apporoved specification &
direction of EIC.
1006 D SPRINKLER SYSTEM 0 0.00 0 0.00
1007 1 Supply,Installation,Testing & Commissioning of Nos 209.00 507.4 1,06,046.60
Pendent/ Upright type Standrd Sprinkler with
QB of 68 /79 deg. C temperature rating and
1/2" end connection confirming to IS: 15105
with ISI mark for all floors etc. all complete as
per direction of Engineer-in-charge.
1008 2 Providing, fitting & fixing of following size cast 0 0.00 0 0.00
iron double flanged Y type strainer with SS 304
perforated screen confirming to IS 1538 with ISI
mark of pressure rating PN-1.60 including fixing
the same with supply of required jointing
materials like rubber insertion, MS nuts & bolts,
paint etc. and testing the joints with required
water pressure & all complete as per
specification & direction of E.I.C.
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
1010 3 Supply,Installation,Testing & Commissioning of Set 3.00 800.04 2,400.12
Cast Iron Ball Valve with teflon seals, Stainless
steel Ball & Stem, MS Lever with PVC Coating As
Per IS: 9890 ISI Marked.
1011 4 Providing, fitting and fixing of C.I. single Air Nos. 2.00 1692.12 3,384.24
relief valve with stop cock confirming to
IS:14845/2000 with ISI mark for water works
purpose including fixing the same with hydrant
riser including testing & commissioning the
system etc. all complete as per approved
specification & direction of EIC.
1012 5 Providing & fixing of Water Flow Switch switable Nos 1.00 6818.04 6,818.04
for pipe 100 mm Diameter with all accessories
for all floors etc. all complete as per direction of
Engineer-in-charge.
1013 6 Providing & fixing of 25 mm size Gunmetal Nos 1.00 3097.5 3,097.50
Pressure Release Valve with isolation valve and
all accessories conforming to IS3233:1965 as
per direction of Engineer-in-charge.
1014 7 Providing, laying, testing & commissioning of Nos 80.00 2853.24 2,28,259.20
Flexible Sprinkler Hose Corrugated Unbraided
type of length 1mtr for Fire Sprinklers, with 1''
Inlet Nipple BSPT,1/2" Outlet Reducer BSPT,0.7
m Square Supports Bar & Brackets(UL Listed)
with all complete accessories as per direction of
Engineer-in-charge.
1015 E EXTINGUISHER SYSTEM 0 0.00 0 0.00
1016 1 Portable Fire Extinguisher System Supplying, Nos 18.00 14309.86 2,57,577.48
installation, testing and commissioning of CO2
type Fire Extinguisher 4.5 kg capacity confirming
to IS: 2878 made from ISI marked seamless
cylinder confirming to IS: 7285, fitted with ISI
marked controlled valve confirming to IS: 3224,
high pressure 1mtr discharge hose & horn
complete with initial gas charged with carrying
handle & wall mounting bracket as per direction
of Engineer-in-charge.
1017 2 Supplying, installation, testing and Nos 2.00 6558.44 13,116.88
commissioning of ABC type fire extinguishers of
6 kg capacity including cost of all material &
labour etc complete.
1018 3 Supplying, installation, testing and Nos 2.00 6005.02 12,010.04
commissioning of Mechanical Foam type 9 litre
capacity Fire Extinguisher, ISI marked, IS:
10204, containing 540 ml AFFF liquid ISI
marked, IS: 4989 Part II and a polyurethane
coated CO2 Gas Cartridge, ISI marked, IS: 4947
complete with gunmetal union cap, nylon hose
with plastic foam making branch and wall
mounting bracket as per direction of Engineer-in-
1019 F AUTOMATIC FIRE ALARMING SYSTEM 0 0.00 0 0.00
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
1020 1 Supplying installation testing and commissioning No 1.00 281990.5 2,81,990.50
of Microprocessor based Addressable Fire Alarm
Control Panel (2 loop ) suitable for serving the
followingg detectors & Devices in maximum with
LCD display, complete withb) 2 Nos 12 Volt 40
Ah SMF battery, Battery backup and also
provision for 2 Nos potential free Normally open
contact per loop to be used for interlocking of
AHUs in the event of fire with provision for
interface along PA Controller including call
station in built suitable for 240 watt amplifier as
per direction of Engineer-incharge.
1021 2 Supply, Installation, Testing & commissioning of Nos 250.00 4847.44 12,11,860.00
Analog Addressable smoke cum heat detector
or heat detector sensor with status indicator .
(Make:Cooper/ Morley/ Edward/ Notifier/
Hochiki/ Siemens/ GST)
1022 3 Supply, Installation, Testing & commissioning of Nos 10.00 6323.62 63,236.20
Addressable Manual Call Point soft addressable
type with in built fault isolator as
required.(Make:Cooper/ Morley/ Edward/
Notifier/ Hochiki/ Siemens/ GST)
1023 4 Supply, Installation, Testing & commissioning of Nos 70.00 356.36 24,945.20
Response Indicator complete as
required.(Make:Cooper/ Morley/ Edward/
Notifier/ Hochiki/ Siemens/ GST)
1024 5 Supply, Installation, Testing & commissioning Nos 10.00 10159.8 1,01,598.00
ofAddressable Loop Powered Hooter cum Strobe
(sound output of minimum 90db) cum strobe
(strength of light 10cd) complete with inbuilt
isolator as required. (Make:Cooper/ Morley/
Edward/ Notifier/ Hochiki/ Siemens/ GST)
1025 6 Supply & Fixing of 2 core 1.5 sq.mm, multi Mtr. 2500.00 156.94 3,92,350.00
strand, copper conductor, FRLS (Fire Retardent
Low Smoke)-PVC insulated GI Screened
Armoured cable with saddle and required
accessories.& Power Cable.
1026 7 Supply, Installation, Testing & commissioning of No 10.00 7137.82 71,378.20
Addressable transponder/ Monitor cum Control
Modules (1 input + 1 output) for monitoring
flow switches/Fire exit doors etc complete as
required. (Make:Cooper/ Morley/ Edward/
Notifier/ Hochiki/ Siemens/ GST)
1027 8 Supply ,Installation ,Testing & Commissioning of Nos 1.00 48795.36 48,795.36
Output Control Relay Module.
1028 9 Supplying, installation, testing and Nos 0.00 68786.92 0.00
commissioning of Addressable Beam(Infrared)
Detector including Transmitter & Receiver,
complete with base and isolator as per direction
of Engineer-in-charge.
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
1029 10 Supplying and fixing metal box of following sizes Nos 60.00 151.04 9,062.40
(nominal size) on surface or in recess with
suitable size of phenolic laminated, sheet cover
in front including painting etc. as required. 100
mm X 100 mm X 60 mm deep.
1031 1 Supplying, installation, testing & commissioning Nos. 1.00 118876.74 1,18,876.74
of 6 zone,voice alarm controller with USB, MP3
player (including 6 zone button paging station)
with seamless integration facility with main fire
alarm panel for voice evacuation complete as
1032 2 Supplying, installation, testing & commissioning Nos. 1.00 81025.88 81,025.88
of digital audio amplifier 250 Watt, 25V rms
operating at 240 Volt AC Supply complete as
1033 3 Supplying, installation, testing & commissioning Nos. 15.00 2350.56 35,258.40
of ceiling/wall mounted loud speaker, 3/15 Watt
in ABS enclosure complete as required
1034 4 Supplying and drawing of speaker cable Single Mtr. 1655.00 76.7 1,26,938.50
pair, 2-core, 1.5 sqmm in existing conduits
1035 0 Sub-Total of Firefighting Works 0 0.00 0 13140970.88
1036 VI. Other Works 0 0.00 0 0.00
1037 0 DATA ,TELEPHONE & CCTV 0 0.00 0 0.00
1038 1 Supply,installation, testing and commissioning of Set 2.00 15930 31,860.00
4 P&T & 14 Extensions Hybrid EPABX System
1039 2 Supply,installation, testing and commissioning of Set 16.00 531 8,496.00
RJ11 Modular Complete in concealed manner
including termination of cable
1040 3 Supply & Laying of 2 Core 0.5mm telephone Rmt 444.00 76.7 34,054.80
cable using Rigid PVC Pipe in concealed manner
per running metre of cable laid.
1041 4 Supply,installation, testing and commissioning of Nos 16.00 826 13,216.00
Electronic Push Button Telephone with Caller ID
1042 5 Supply,installation, testing and commissioning of Nos 2.00 4130 8,260.00
GSM FCT Terminal
1043 6 Supply,installation, testing and commissioning of Nos 2.00 1357 2,714.00
Lightening Protector for P&T Lines
1044 7 Supply,installation, testing and commissioning of Nos 2.00 1475 2,950.00
12v 7 Ah Battery including termination
1046 1 Supply,installation, testing and commissioning of Set 26.00 531 13,806.00
RJ45 Modular Complete in concealed manner
including termination of cable
1047 2 Supply & Laying of Cat 6 cable using Rigid PVC Rmt 728.00 82.6 60,132.80
Pipe in concealed manner per running metre of
1048 3 Supply,installation, testing and commissioning of Set 2.00 7786.82 15,573.64
Patch Panel, 6U Rack, Cable Manager, Cooling
Fan x 2 Nos., Earthing Kit, Power Manager
1049 4 Supply,installation, testing and commissionining Nos 26.00 224.2 5,829.20
of 1 Mtr Patch Cord
1050 5 Supply,installation, testing and commissionining Nos 26.00 283.2 7,363.20
of 3 Mtr Patch Cord
1052 1 Supply,installation, testing and commissioning of Set 2.00 11800 23,600.00
10 Channel DVR with 2 Sata Ports
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
1053 2 Supply,installation, testing and commissioning of Nos 16.00 8850 1,41,600.00
4 MP Dome / Bullet Camera with 25 Mtrs IR
1054 3 Supply & Laying of RG59+ 3 Core cable using Rmt 515.00 82.6 42,539.00
Rigid PVC Pipe in concealed manner per running
metre of cable laid.
1055 4 Supply,installation, testing and commissioning of Nos 16.00 88.5 1,416.00
BNC & DC Connectors
1056 5 Supply,installation, testing and commissionining Nos 2.00 11210 22,420.00
of 4 TB CCTV Surveillance Hard Disk
1057 6 Supply,installation, testing and commissionining Nos 2.00 5310 10,620.00
of 10 Amps Power Supply
1058 7 Supply,installation, testing and commissioning of Nos 2.00 29500 59,000.00
Smart 32" LED Monitor
1059 8 Supply,installation, testing and commissioning of Nos 2.00 14160 28,320.00
10 Mtrs HDMI Cable
1060 9 Supply,installation, testing and commissioning of Nos 16.00 885 14,160.00
1061 10 Supply,installation, testing and commissioning of Nos 2.00 885 1,770.00
1063 1 OXYGEN SYSTEM 0 0.00 0 0.00
1064 a Oxygen Gas Outlet Point Nos. 111.00 2950 3,27,450.00
1065 b Oxygen Manifold 8+8 with tail Pipe & NRV Nos. 1.00 183073.46 1,83,073.46
8 X 8 oxygen cylinder; Oxygen manifold should
be suitable to withstand a pressure of
1066 c Oxygen Manifold 4+4 Emergency with Rgulator Nos. 1.00 93797.02 93,797.02
To comply with relevant standards.
4 X 4 X7M3 oxygen cylinder; Oxygen cylinder
manual manifold with good quality preset
1067 d Oxygen Fully Automatic Control Panel Nos. 1.00 319780 3,19,780.00
oxygen cylinder; Oxygen manifold should be
suitable to withstand a pressure of 145kg/cm2
1068 e Oxygen Flow meter with Humidifire Bottle Back Nos. 57.00 2501.6 1,42,591.20
Pressurecompensated flow meter os of accurate
gas flow with following features. Control within a
range of 0-15 lpm(callibration within+/-10%)
1069 f Oxygen Adopter Nos. 111.00 599.44 66,537.84
Pressure line adopter pins etc to be supplied in
adequate numbers
1070 2 VACCUM SYSTEM 0 0.00 0 0.00
1071 a Vaccum Gas Outlet Point Nos. 58.00 2950 1,71,100.00
1072 b vaccum Adopter Nos. 58.00 599.44 34,767.52
Pressure line adopter pins etc to be supplied in
adequate numbers
1073 c Ward Vaccum Regulator with 600ml. Jar Ward Nos. 58.00 4294.02 2,49,053.16
vaccum unit shall be up light weight and
The Unit Should conist of a regulator
1074 d Reciprocating Vaccum Pump Nos. 2.00 598945.58 11,97,891.16
Cap:- 10HP, Kw:-7.5 Kw, CFM:- 149, LPM:-
1075 e Vaccum Receiver , Cap:-1000 Ltr Nos. 1.00 129960.48 1,29,960.48
Vaccum Receiver's 1 X 1000 (Total 1000 Ltrs.)
capacity vertical vaccum receiver
1076 3 COMPRESSED AIR SYSTEM 0 0.00 0 0.00
1077 a Air Gas Outlet Point (4 bar) Nos. 79.00 2950 2,33,050.00
1078 b Air Gas Outlet Point (7 bar) Nos. 4.00 2950 11,800.00
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
Pressure line adopter pins etc to be supplied in
adequate numbers
1080 d Air Pressure Regulator Nos. 4.00 11074.3 44,297.20
1081 e Oil Free Receprocal Air Compressor Nos. 2.00 819312.94 16,38,625.88
Cap:- 10HP, Kw:-7.5 Kw, CFM:- 39 CFM, LPM:-
The receiver assembly are be fitted with a
pressure safty valve
1083 g Desicant Air Dryer, Cap:- 40 CFM Nos. 1.00 203688.06 2,03,688.06
CFM:- 40 CFM , Dryer type:- Regenerative
Dryer, Design pressure:-13.2 bar g, maximum
Air inlet tempreature:- 65 degree maximum
Pressure:-25 bar, pressure dew point:- 40
1084 4 degree
Oxide System 0 0.00 0 0.00
1085 a Nitrous Oxide Outlet Set 5.00 2950 14,750.00
1086 b SITC of Nitrous Oxide Manifold compressing of Set 1.00 49560 49,560.00
N2O cylinder in the main manifold with a 4 nos
tail pipe with stand.
1087 c SITC of Emergency Nitrous Oxide Manifold Set 1.00 16829.16 16,829.16
comprising of 1 N2O manifold with tail pipe ,
Regulator and stand
1088 d SITC Automatic Control Panel of Digital fully Set 1.00 344560 3,44,560.00
1090 a AGSS system consisting of Duplex, Skid Set 0.00 1079700 0.00
Mounted, AGS Pumps with Remote Switches –
AGSS Simplex Start Switch. As per specification.
1091 b AGSS Outlet Nos. 0.00 19470 0.00
1092 6 Carbon Oxide System 0 0.00 0 0.00
1093 a Carbon Oxide Outlet Set 5.00 2950 14,750.00
1094 b SITC of Carbon Oxide Manifold compressing of Set 1.00 27140 27,140.00
1+1 cylinder in the main manifold with a 2 nos
tail pipe with heater and stand.
1095 c SITC of Emergency Carbon Oxide Manifold Set 1.00 16829.16 16,829.16
comprising of 1 N2O manifold with tail pipe ,
Regulator and stand
1096 d SITC Automatic Control Panel of Digital fully Set 1.00 344560 3,44,560.00
1097 0 Distribution system 0 0.00 0 0.00
1098 7 Supply, installation, testing & commissioning and 0 0.00 0 0.00
Handing over of solid drawn copper pipes
manufactured as per BS 2871 - EN 13348/ASTM
B819 duly certified by Lloyds or third party
agency with all necessary fittings pipe supports,
complete as per specificatin. Lolldy certified EN:
13348,Make:-Janya/Mandev
1099 a 12mm outer dia x 0.7 mm thick Mtr 356.00 620.68 2,20,962.08
1100 b 15mm outer dia x 0.9mm thick Mtr 246.00 787.06 1,93,616.76
1102 d 28mm outer dia x 0.9mm thick Mtr 596.00 2011.9 11,99,092.40
1103 e 42 mm outer dia x 1.2 mm thick Mtr 100.00 3551.8 3,55,180.00
1104 f 54 mm outer dia x 1.2 mm thick Mtr 70.00 5634.5 3,94,415.00
1105 8 Supply, installation, testing & commissioning of 0 0.00 0 0.00
Isolation ball valves for the pipelines complete
with supports etc These quantities so not include
the volves in the wquipment room which shall be
quoted as included in the wquipment as
specified above.
Digitally signed by Rakesh
Abs. Sr. Head Description of Item Unit Qnty. Rate Amount
1112 9 Isolation Ball Valve with Brass Adopter & Valve 0 0.00 0 0.00
Box Powder coated signal
box with lockable door. The door are fitted with
transperant breakable glass. Each-gas line had
fitted with respective pressure gauges
1115 10 Area Alarm System 0 0.00 0 0.00
Individual gas status LED indicator- showing
NORMAL, HIGH & LOW conditions for each
service. Audio Alarm Indicator By Piez electric
1118 11 Supply installation and providing wiring and Nos. 18.00 21001.64 3,78,029.52
piping connctions for bed head wall panels. The
panel shall be fabricated out of high strengths
extruded alluminium sections with inbuild single
rolling and powder coated to color as per the
owners choice. the panel shall have facility to
accomodate: Max. 5 nos of Gas outlets, 5/15 A
multi pin switched socket outlets -2 nos,1 nos
Nurse call switch panel with wired remote. , 1 no
infusion pump rail mount pole with adapter, and
holder for vacuum collection jar.
1119 0 Sub-Total of Other Works 0 0.00 0 11826059.12
Digitally signed by Rakesh
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
5 NIT.pdf
Tender Document
3a GCC Contracting with Ammendment 4.pdf
Tender Document
3b SCC.pdf
Tender Document
8 Milestone.pdf
Tender Document
11 BOQ DHE 003 PM ABHIM.pdf
Tender Document
12 Integrity Pact.PDF
Tender Document
13 List of Approved Makes NHM Project Odisha.pdf
Tender Document
14 Scope of Work.pdf
Tender Document
CCB Drawings.pdf
Tender Document
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .