Loading
Loading…
Loading…
Tender Value
₹1 L
EMD Value
₹2,000
Closing Date
4 Aug 2026, 5:00 pm
Executive Engineer REW Kishtwar
HALL NO. 4 LOWER BLOCK MINI SECTT KISHTWAR O/O Executive Engineer REW Kishtwar
REFER BOQ
2026_RDPR_317075_2
e-NIT No 35 of REW KISHTWAR 2026-27 Dated. 20 .07.2026
Open Tender
Civil Works
Percentage
KISHTWAR
Please refer Tender documents.
2 documents required · 2 mandatory
₹600
Rural Development and Panchayati Raj
₹2,000
Yes
21 Jul 2026
21 Jul 2026
5 Aug 2026
21 Jul 2026
4 Aug 2026
21 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m
in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and
ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as
directed: | 4.68 | CUM | 479.3 | ₹2,243.12 |
| 2 | Providing and laying in position cement concrete of specified grade including curing but
excluding the cost of centring and shuttering4.4.5 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) | 0.76 | CUM | 5,733.6 | ₹4,357.54 |
| 3 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in
foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) | 4.16 | CUM | 7,571.55 | ₹31,497.65 |
| 4 | Honey-comb brick work 10/11.4 cm thick with common burnt clay (non-modular) bricks
of class designation 75 in superstructure above plinth level upto floor five level in
cement mortar 1:4 (1 cement : 4 coarse sand) including curing complete | 2.98 | SQM | 713.1 | ₹2,125.04 |
| 5 | Structural steel work in single section, fixed with or without connecting
plate, including cutting, hoisting, fixing in position and applying a priming
coat of approved steel primer all complete. | 187.74 | KG | 120.8 | ₹22,678.99 |
| 6 | 12 mm PLASTER 1:6 MIX | 26.02 | SQM | 266.8 | ₹6,942.14 |
| 7 | Providing and fixing precoated galvanized iron profile sheets (size, shape
and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+
0.05 %) total coated thickness with zinc coating 120 grams per sqm as per
IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have
protective guard film of 25 microns minimum to avoid scratches during
transportation and should be supplied in single length upto 12 metre or as
desired by Engineer-in-charge. The sheet shall be fixed using self drilling
/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto
any pitch in horizontal/ vertical or curved surfaces, excluding the cost of
purlins, rafters and trusses and including cutting to size and shape
wherever required. | 15.62 | SQM | 706.5 | ₹11,035.53 |
| 8 | C/O SAND AND BAJREE | 1.08 | CUM | 1,003.82 | ₹1,084.13 |
| 9 | C/O BRICK | 2,096 | NO | 7.82 | ₹16,390.72 |
| 10 | CIB | 2 | NO | 1,500 | ₹3,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.02 MB
BOQ_1037349.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].