REPAIRS TO ROADS OF PERIMETER OF BOUNDARY WALL AND CERTAIN TECHNICAL AREA AT AF STN UTARLAI

Amount

M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags or air compressor blower to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer of grade VG-10 at the rate of 5.00 Kg per 10 Sqm on black top bituminious surfaces etc and providing bituminous premix semi dense asphaltic concrete 30mm consolidated thickness using paving bitumen VG-30 with 5.5 % binder by weight of total mix, by means of self propelled mechanical paver, rolled and compacted the surface to required camber and gradient with 8 to 12 tonne power roller complete all as specified and directed.

M&L for premix bituminous macadam (Consolidated thickness 75mm or less) using paving bitumen (VG-30) 4% by weight of total mix, spread, rolled and compacted to required camber and gradient complete with 8 to 12 tonne power roller complete all as specified and directed.

M&L for repairs to pot holes any depth, not exc 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened and graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed.

M&L for marking 2.5mm thick centre line side line stop line, dashes, arrows, brackets & similar work; 10cm wide and over on road surfaces as per IRC pattern with thermo plastic paint of approved quality and make with 8% glass beads laid at temperature of 160 degree centigrade with a special applicator machine complete all as specified & directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided as in floor/paving/hardstanding and removing the same upto 1.00 KM or outside the MD land complete all as specified and directed.

M&L for cement concrete work in pavement/hardstanding of flexural strength 40 Kg/Sqcm in field using 400 Kg of cement per cubic meter, thickness of cocrete 25cm or less including finishing surface concrete floor/paving/hardstanding, by brooming when concrete is green complete all as specified and directed.

M&L for cement concrete (1:4:8) type D2 using 40mm graded stone aggregate as in sub base and foundation, filling and mass concrete comlete all as specified and directed.

M&L for forming construction joint 10mm wide and 30mm deep and filling with sealing compound Grade 'B' complete all as specified & directed.

M&L for forming contraction (dumy) joint 65mm deep and 10mm wide filled with sealing compound Grade 'B' complete all as specified & directed.

GEMRARAMCONTRACTOR

M/S LAXMAN CONSTRUCTION COMPANY