CERTAIN REPAIR /MAINTENANCE OF WOODEN/STEEL FURNITURE ITEMS, POLISHING OTHER WORKS AT GE (AF) UDHAMPUR

Amount

Almirah Large Steel (Drawing No FD 351/1031) Removal of dent and bends etc all over the Almirah large steel including shelves by manually/mechanically and including preparation old decorated, surfaces for painting as specified and as directed by Engineer-in-Charge.

Provision of Gas Welding in repair to strengthen including repair/replacement of weak and damaged portion of Almirah steel large where required made to shape and size as specified in drg and all as directed by Engineer-in-Charge.

Replacement of existing broken pair of foot rests of Almirah large steel with new made of PBI sheets 1.25mm thick, made to shape & size for each almirah as per drg and as directed by Engineer-in-Charge.

Proper fitting of existing shelves of Almirah large steel with new MS nuts, clips/rivets etc of standard size for each alimirah, all as directed by Engineer-in-Charge.

Replacement of existing unserviceable shelves of Almirah large steel made out of PBI Sheets 1 mm thick made to shape and size as per drg and as directed by Engineer-in-Charge.

Making good the hinges by welding /screwing /replacing the brocken screws inside the door shutters hinges and adjusting the same as required and making smooth functioning of shutter for each Almirah large steel and as directed by Engr-in-charge.

Taking out old unserviceable existing lock from Almirah large steel and providing new MS locks having 6 brass lever with two keys of best quality as approved by GE and as directed by Engineer-in-Charge for each almirah. Make : Harrsion/Link locks .

Replacement of existing old unserviceable/broken handles with new MS CP handle of superior quality with nuts and washer to each Almirah large steel all as per drg and as directed by Engineer-in-Charge.

Taking out existing old unserviceable/broken locking device with cover for each Almirah large steel, made to shape and size as per drg and as directed by Engineer-in-Charge .

Almirah Medium Steel. (Drawing No. FD- 350 & 1032 Description all as per Item at Ser No 1 (a) here-in-before but for Almirah medium steel.

Description all as per Item at Ser No 1 (b) here-in-before but for Almirah medium steel .

Description all as per Item at Ser No 1(c) here-in-before but for Almirah medium steel.

Description all as per Item at Ser No 1(d) here-in-before but for Almirah medium steel.

Description all as per Item at Ser No 1 (e) here-in-before but for Almirah medium steel.

Description all as per Item at Ser No 1(f) here-in-before but for Almirah medium steel.

Description all as per Item at Ser No 1(g) here-in-before but for Almirah medium steel .

Description all as per Item at Ser No 1(h) here-in-before but for Almirah medium steel .

Description all as per Item at Ser No 1(j) here-in-before but for Almirah medium steel.

Table dining OR (Drg as applicable). (a) Provn of gas welding to broken joints/parts (upto 5-8 joints) of frame of Table dining ORs including repair/replacement of weak/damaged portions (upto 2 feet to 4 feet long) where required made to shape and size all as per drg including its smoothening and preparation of old decorated surface of complete frame by filling up putty etc for its painting and providing two coats of synthetic enameled black/OG paint with sprayer as required to complete frame of each Table dining ORs all as directed .

Almirah large steel (Drg No FD-351). (a) Removing of old paint by paint remover/scrapper/blow lamp etc including cleaning dirt & rust and preparation of old decorated surface by filling up putty etc where required and its smoothening for painting to Almirah large steel and applying two coats of synthetic enammelled OG paint over a coat of primer by using spray machine both internally and externally complete all as directed by Engineer-in-Charge.

Almirah Medium steel (Drg No FD-350 and FD-1032). (b)Description all as per item 4 (a) above but for Almirah Medium steel.

Charpoy IP Hard Top of plywood FD/MAP-II/01). Removing of old paint by paint remover/scrapper/blow lamp etc including cleaning dirt & rust and preparation of old decorated surface by filling up putty etc where required and its smoothening for painting to charpoy IP MAP and applying two coats of synthetic enammelled black paint over a coat of primer by using spray machine both internally and externally complete all as directed by Engineer-in-Charge

Teapoy Verandah (Drg as applicable). Replacement of existing unserviceable top of Teapoy verandah with new top made out of 18/19mm thick both side prelaminated particle board with edging 4mm thick of teak wood beading all round the top and including replacement of broken support of flat iron strips with new strips made ot of flat iron of size 25x3mm of required length and removing of old paint by paint remover/scrapper/blow lamp etc including cleaning dirt & rust and preparation of old decorated surface by filling up putty etc where required and its smoothening for painting and applying two coats of syntetic enamelled white paint over a coat of primer by using spray machine and all as directed by Engineer-in-Charge.

Chair verandah (Drg No FD-256). (a) Provn of Gas welding to the broken joints/parts upto 4-6 joints including provision of MS conduit pipe 19mm dia (upto the length of approx 2 feet long) where required to complete the parts of frame of chair verandah including its smoothening for repainting/recanning all as per drg and as directed.

Recanning of chair verandah with new cane plastic 4mm wide half round type having high density of Make: Shah/Premier (as approved by GE) after removal of existing old unserviceable cane plastic and including provision of one coat of synthetic enamel white paint to the existing frame of each chair verandah, recanning to be done closely all as per the pattern shown on drawing and providing PVC hard rubber shoes of required size to each leg of chair verandah and as directed by the Engineer-in-charge.

Recanning of all type of wooden chairs such as chair dining, chair writing , chair easy (Drawing as applicable) etc with new plastic cane half round type 2mm to 2.5mm wide having high density of Make : Shah/Premier as approved by GE after removal of existing old unserviceable cane plastic, recanning to be done in Godrej pattern after removal of existing old unserviceable cane plastic and border of chair shall be of 3mm wide cane plastic (as approved), rest all as per drawing and as directed by the Engineer-in-Charge.

Chair Dining JCO/OR Drawing No FD/MAP-II/05). Replacement of old unserviceable PVC seat 4mm thick from chair dining JCO/OR and supply & Fixing of new PVC seat of 4mm thick with holes & screwed with frame any 4x10mm thick ribs moulded along with seat in single piece, all as directed.

Sofa set to sit 4 person. (Drawing No FD-281,1113). Replacement of old unserviceable seat & back to sofa set to sit 4 persons (Four small pieces of single seat) with new seat made of new foam cushion of sizes 21"x22"x100mm/530mmx560mmx100mm thick, 32 density, of Make : Sleepwell/Kurlon/Coir foam/Coolfoam/Godrej as approved by the GE duly covered with tapestry/velvet cloth of best quality of costing not less than Rs. 400/- per mtr of any colour as approved by the GE, rest all as per drawing and as directed.

Table office clk steel, FD-1004. (a) Description all as per Item at Ser No 3(a) above but for Table office clerk steel and providing spray painting with OG paint with sprayer to complete table including both inner and outer side of cup board of table.

Replacement of existing old unserviceable broken base of cup board of Table office clerk steel with PBI sheet of 1.00 mm thick, made to shape and size all as specified in drg and as directed by Engineer-in-Charge.

Description all as per item at Ser No 12.01 here-in-before but for Table office clerk steel.

Taking out existing old broken/unserviceable table top and supply and fixing with new table top of table office clerk steel made of 18/19mm thick both side prelaminated particle board (conforming to IS specifications) exterior grade (teak shade in upper side and white shade in lower side) including 4mm thick teak wood beading all round the top duly polished with French polish and providing PVC hard rubber shoes of required size to each legs of table complete, all made to shape and size all as directed by Engineer-in-charge.

Table Dining ORs. Taking out existing old broken/unserviceable table top and supply and fixing new table top to Table dining ORs, made of 18/19 mm thick block board interior grade duly covered with 0.80 mm thick aluminium sheet and fixed all as per drg including providing hard rubber/PVC shoes of required size to each legs of table all as directed by Engineer-in-Charge.

Rack Shoe steel MAP (FD/E6/MAP/02 (R ). Removing of old paint by paint remover/scrapper/blow lamp etc including cleaning dirt & rust and preparation of old decorated surface by filling up putty etc where required and its smoothening for painting to Rack shoe steel MAP and applying two coats of synthetic enameled black paint over a coat of primer by using spray machine both internally and externally complete all as directed by Engineer-in-Charge

Chair Verandah MAP FD/MAP-II/06. Removing of old paint by paint remover/scrapper/blow lamp etc including cleaning dirt & rust and preparation of old decorated surface by filling up putty etc where required and its smoothening for painting to Chair Verandah MAP and applying two coats of synthetic enameled black paint over a coat of primer by using spray machine complete all as directed by Engineer-in-Charge

Replacement of old existing unserviceable PVC seat of chair verandah MAP supply and fixing new PVC seat as per drg and rest all as directed by Engr-in-Charge.

Replacement of old existing unserviceable PVC back of chair verandah MAP supply and fixing new PVC back as per drg and rest all as directed by Engr-in-Charge.

Sofa Set to sit 5 Persons. Replacement of old unserviceable Seat& Back of Sofa set to sit 5 persons (in three pieces) with new seat made of new foam cushion of sizes 530mmx560mmx100mm thick/500mmx530mmx100mm thick, 32 density, of make Sleepwell/Curlon/Coir foam/ Coolfoam as approved by the GE duly covered with tapestry/velvet cloth of best quality of costing not less than Rs 400/-per mtr of any colour as approved by the GE, rest all as per drawing and as directed. FD-281,1113

Sofa set to sit 5 persons/4 persons (Drawing No FD-281,1113). Removing old broken parts without damaging adjacent parts of Sofa set to sit 5 persons/4 persons and supply and fixing following new parts of first class teak wood all as specified and shown on respective drawing.

Supply and fixing of back leg

Supply and fixing of front leg

Supply and fixing of Arm

Supply and Fixing of front rail for three setaer

Supply and Fixing of Back rail for three setaer

Supply and Fixing of side rail for three setaer

Supply and fixing of side and front rail for single seater

Supply and fixing of Back rail for single seater

Supply and fixing of wooden bearers at bottom of seat cover for three seater

Supply and fixing of wooden bearers at bottom of seat cover for single seater

French polishing to all visible surface of complete Sofa set to sit 5 pers (in three pieces) after removal of dust and dirt complete all as specified and as directed.

French polishing to all visible surface of complete Sofa set to sit 4 pers (in three pieces) after removal of dust and dirt complete all as specified and as directed.

Side board, FD-241. Removing of old broken/unserviceable parts of Side board without damaging adjecent parts and fixing with new part of 1st class teak wood/particle boards as specified and as directed by Engineer-in-Charge.

Supply and fixing top of side board of 19mm thick commercial particle board with 1.5mm thick plastic laminated sheet.

Supply and fixing of drawer with 19mm x19mm teak wood bearers.

Supply and fixing of left hand side shelf of 19mm thick particle boad

Supply and Fixing of continuous piano type hingers.

Supply and fixing of brass lock with four lever.

Supply and fixing of bottom frame .

French polishing to all visible surface after removal of dust and dirt complete all as specified and as directed.

:-Removing of old unserviceable components from the following furniture and supply and fixing new components of of first class teak wood duly finished and french polished, sizes as per drg and all as directed by Engr-in-Charge:-

Parts of Chair Dining (FD-279)

Supply and fixing Bottom Stiffner

Supply and fixing Rear Leg

Supply and fixing Side Rail

Supply and fixing Front Leg

Supply and fixing Back rest

Parts of Chair Writing (FD-280)

Supply and fixing Rear Leg

Supply and fixing Front Leg

Supply and fixing front Rail

Supply and fixing Side Rail

Supply and fixing back Rail

Supply and fixing Bottom stiffener

Supply and fixing Arms (Hand rest)

Parts of Chair Easy (FD-229)

Supply and Fixing Rear Leg

Supply and Fixing Front Leg

Supply and Fixing Front Rail

Supply and Fixing Side Rail

Supply and Fixing Back Rail

Supply and Fixing Arm (Hand Rest)

Parts of Bed Hard witrh Ply top (FD-246)

Supply and Fixing Foot Board

Supply and Fixing Head Board

Supply and fixing ply wood commercial 6’x3 ’size and 12 mm thick ISI marked

Supply and Fixing Short rail.

Supply and Fixing Long Rail.

Parts of table writing (FD-275)

Supply and Fixing Leg

Supply and Fixing Long Rail.

Supply and Fixing Short Rail.

Supply and Fixing Bottom Long Stiffener.

Supply and Fixing Bottom short stiffener.

Parts of Table 900mmx600mmx760mm with/ without Drawer (FD-284)

Supply and Fixing Leg.

Supply and Fixing Long Rail.

Supply and Fixing Short Rail.

Supply and Fixing Stiffener long.

Supply and Fixing Stiffener short.

Parts of table 900x900x760mm (FD-291)

Supply and Fixing Leg.

Supply and Fixing Long Rail.

Parts of peg table (FD-277/384)

Supply and Fixing Leg.

Supply and Fixing Long Rail.

Supply and Fixing Short Rail.

Supply and Fixing Bottom stiffeners.

Parts of Peg table MAP. (FD/E6/MAP/11)

Supply and Fixing Leg.

Supply and Fixing Side Rail.

Supply and Fixing Bottom stiffeners.

Parts of Teapoy wooden (FD-278)

Supply and Fixing Leg.

Supply and Fixing Long Rail.

Supply and Fixing Bottom Rail.

Parts of Table Centre (FD-274)

Supply and Fixing Leg.

Supply and Fixing Long Rail.

Supply and Fixing Short Rail.

Supply and Fixing Bottom stiffener.

Parts of table dining 8 pers(FD-273)

Supply and Fixing Leg.

Supply and Fixing Long Rail.

Supply and Fixing Short Rail.

Supply and Fixing Stiffener

Parts of Bed hard FD/E6/MAP/08® Taking out existing old unserviceable plywood top from Bed hard and supply and fixing of new top made of ply wood commercial of size 6.5'x3'x12mm thick on the frame with appropriate size Kitply, ISI Marked, all as specified and directed.

Charpoy GI pipe with plywood top Taking out existing old unserviceable plywood top from Charpoy GI pipe and supply and fixing of new ply wood commercial of size 6.5'x3'x12mm thick on the frame with appropriate size Kitply, ISI Marked, all as specified and directed.

Taking out existing old broken/unserviceable top from Table writing and supply and fixing with new table top of 18/19mm thick both side prelaminated particle board of ISI Marked ,exterior grade teak shade & providing 4mm thick teak wood beading/edging all round the top made to shape and size all as per drawing including polishing with French polish to the top of beading all as directed by Engineer-in-Charge.

All as per the description of serial item 22above but top of table of size 900mmx600mm with or without drawer.

All as per the description of serial item 22 above but top of table of size 900mmx900mm.

All as per the description of serial item 22 above but top of Teapoy wooden.

All as per the description of serial item 22 here-in-before but top of Peg table.

All as per the description of serial item 22 here-in-before but top of Centre table.

All as per the description of serial item 22 here-in-before but top of Table dining, 6 persons.

All as per the description of serial item 22 here-in-before but top of Table dinning , 8 Persons.

All as per the description of serial item 22 here-in-before but top of Peg table MAP.

Conversion of Existing GI pipe charpoy with nylon newar to GI pipe charpoy with plywood top) Fiixing 02 numbers flat iron of size 50x6mm on the frame of GI pipe charpoy in equal distance from lshort rail @02 each. Fixing plywood commercial 12mm thick Make: Kitply, Century plywood, Unipac ISI marked on the frame after drilling 14 holes (03 each on long rails, 02 each on short rails and 02 each on flat iron frame) with appropriate size headless bolts and nuts. Frame of charpoy GI pipe and plywood to be furnished so that the projection is eliminated completely. Rest all as per specified and as direceted by Engineer-in-Charge.

Charpoy GI pipe (Drg No FD-220) Removing the broken end long rail of charpoy from the frame, cutting the broken end, rethreading up to the required length and fitted/assemnbled to the frame all as per drg and as directed.

Taking out old, broken end long rail from the three way elbow by unscrewing and replacing with new long rail of GI pipe, 32mm bore medium grade ISI marked duly threaded both ends to the required size and fitted to the frame of charpoys complete all as specified, shown on drg and as directed.

All as per the description of Serial item No. 23.02 here-in-before but short rail.

Taking out old, broken end short rail from the three way unscrewing and replacing with new short rail of GI pipe, made up of long rail retrieved vide serial item No. 23.02 here-in-before, duly threaded both ends up to the required size/length and fitted to the GI frame charpoys completed all as specified as shoqn on drg and as directed.

Taking out old, broken end leg from the three way elbow by unscrewing and replacing with new leg of GI pipe, made up of short rail retrieved vide serial item No. 23.02, 23.03 and 23.4 here-in-before, duly threaded one end up to the required size and fitted to the frame complete all as shown on drg and as directed.

Taking out old, unserviceable/broken three way elbow from GI pipe charpoy by unscrewing and replacing with new three way elbow GI 32mm bore, ISI marked (as approved by GE) and fitted to the charpoy GI pipe complete all as specified and shown on drg and as directed.

Description all as per Srl item No 23.06above but GI check nut 32mm bore.

Chair Dining Offr MAP FD/MAP-II/04 . Replacement of existing old unserviceable seat of chair dining cuhioned with new seat of foam cushion of required size. Seat shall be 75mm thick,32 density of Make:sleepwell/Kurlon/Coirfoam/Godrej as approved by the GE duly covered with tapestry/velvet cloth of best quality of costing not less than Rs 400/- per mtr of any colour approved by the GE,rest all as per drg and as directed.

Removing of dust and dirt by scratching, rubbing with sand/emery paper including filling putty etc where required and preparation of smooth surfaces for polishing and applying two coats of French polish of approved quality all as specified and as directed to the following old polished items of furniture.

Bed hard ply top.

Chair writing.(FD-280)

Chair Easy.

Chair dining.

Peg Table.

Hat stand with mirror.

Table bed side.

Table centre.

Table dining 6 persons.

Table dining 8 persons.

Table writing.

Teapoy wooden.

Table 900mmx600mmx760mm with/without drawer.

Table 900mmx900mmx760mm.

Chair dining JCO/Ors.

Repair to chair visitor with cushion of all models, including repair/replacement of seat and back, welding of broken joints of frame of chair visitor to make the chair serviceable all as directed.

Repair to Revolving Chair high back of all model, including repair, replacement of existing old unservicable seat and back and requisite spare parts to make serviceable

Chair Computer MAP. Repair to Chair computer including change of cushion, hyudraulic, replacement of requisite spare parts to make the chair serviceable all as directed by Engr-in-Charge.

Chair Tubular (CB) steel with and without arms FD-75. (a) Gas welding to broken parts of chair tubular (CB) with arms upto 4 to 6 joints and supply and fixing of two supports of iron strips made out of flat iron of size 20x3 mm at the bottom of seat of each frame of required length equal to the frame length and smoothening for painting all as per drg and as directed.

Replacement of old broken unserviceable seat with new seat of chair tubular steel with Arms, made of 1st class hard wood (sheesham) duly painted in black synthetic enamel paint and canned with 2mm to 3.5mm wide cane plastic in Godrej pattern and fixed in chair with full threaded metalic machine screws with nuts and washer of size 75mm long all as per drg and as directed after removal/taking out existing old broken/unserviceable seat from the chair including providing one coat of synthetic enamelded OG paint on complete steel frame of each chair, rest all as per drawing. FD-75(M)

All as per the description of serial item 30 above but seat of chair tubular steel without arms.

All as per description 30 above but back of chair tubular steel with arms.

All as per the description of serial item 30 above but back of chair tubular steel without arms.

Replacement of old broken/unserviceable wooden handle with new handle/arms made of 1st class hard wood (sheesham) duly painted with synthetic enameled paint black in colour to the chair tubular steel with arm all as per drawing and as directed. (As applicable).

Painting for chair cb steel with arms

Painting for chair cb steel without arms

Chair writing cushioned (FD-1107). Removing of existing old unserviceable seat and back of chair writing cushioned with new seat and back of required size. Seat shall be 75mm thick 32 density of Make:sleepwell/Kurlon/Coirfoam/Godrej as approved by the GE duly covered with tapestry/velvet cloth of best quality of costing not less than Rs 400/- per mtr of any colour approved by the GE,rest all as per drg and as directed.

Locker bedside Steel FD-1029 Removal of dent and bends etc all over the locker bed side steel including shelves by manually/mechanically and including preparation old decorated, surfaces for painting as specified and as directed by Engineer-in-Charge.

Provision of Gas Welding in repair to strengthen including repair/replacement of weak and damaged portion of Locker bedside steel where required made to shape and size as specified in drg and all as directed by Engineer-in-Charge.

Replacement of existing broken pair of foot rests of Locker bedside steel with new made of PBI sheets 1.25mm thick, made to shape & size for each almirah as per drg and as directed by Engineer-in-Charge.

Replacement of existing Old unserviceable CP handle and Hasp and staple

Locker Bedside steel FD-1029. Removing of old paint by paint remover/scrapper/blow lamp etc including cleaning dirt & rust and preparation of old decorated surface by filling up putty etc where required and its smoothening for painting to locker bedside steel and applying two coats of synthetic enammelled OG paint over a coat of primer by using spray machine both internally and externally complete all as directed by Engineer-in-Charge.

shivom builders

M/S SACHKHAND ROAD SERVICE

VEE KAY IND

TULSI RAINA AND SONS