Numberpara on Nowagaon-Rangapani

Amount

Making 120 cm wide bamboo foot bridge with 100mm Bholuka or Barua bamboo posts driven 120 cm to 180 cm underground 3 Nos. in each row and rows being 3m apart bholuka or Barua bamboo dham placed over the posts and tied with cane or wire , Bholuka or barua bamboo struts in each row both up and down stream, jati bamboo long gorhs closely packed and tied with dham. Single layer of mat placed over 75mm thick brush wood and tied with bholuka or Barua bamboo rail stand fixed in one side of the bridge etc. complete.

Supplying and driving sal piles 25cm to 30cm dia. Dressed to heart wood including making length in every 30 cm interval, coal tarring two (2) coats with best tar applied hot (Rate inclusive of the cost of the required quantity of tar.) I) portion of pile actually driven under ground

Supplying and driving sal piles 25cm to 30cm dia. Dressed to heart wood including making length in every 30 cm interval, coal tarring two (2) coats with best tar applied hot (Rate inclusive of the cost of the required quantity of tar.) II) portion of pile remaining above ground

labour for making "U" shapeed flat iron strap making 0.5mX0.3m size from 150mmX12mm size MS flat including providing 10 bolts holes and fitting with 0.35m long 20mm dia MS bolts including fitting tightly withbearing beam, pile and RSJ beams etc. as diected by the Department.

'Labour for fitting and fixing RSJ beam, CI saddle etc. in position including necessary scaffolding, cutting them to required size, drilling holes and supplying and fixing ncessary bolts and nuts, painting two coats complete (Tar-Steel paints to be supplied by the contractor at his own costs) including carrying frm PWD Godown.

Supplying, fitting and fixing timber beam and bearing beam rectangular in size fitted with M.S. etc. supplying spikes etc. as necessary and coal tarring two (2) coats with best tar applied hot as directed (tRate is inclusive of cost of the required quantity of tar.) Using Sal Timber

Sal wood work including Supplying, fitting and fixing complete with necessary M.S. bolts, nuts, nails, screws etc. and coal tarring two (2) coats with best tar applied hot as directed (tRate is inclusive of cost of the required quantity of tar.) Undressed wood work in floor planks, collars, bracing, standards, wheel guards, struts and railings, runner belts, rail, posts etc

Sal wood work including Supplying, fitting and fixing complete with necessary M.S. bolts, nuts, nails, screws etc. and coal tarring two (2) coats with best tar applied hot as directed (tRate is inclusive of cost of the required quantity of tar.) In track way planks (alternate nailing to be done with decking in a seggragate way.)

Azar or Nahar or Nageswar or zarul ofr sundi or gamari wood works including supplying , foitting , and fixing complete with necessary M.S. bolts, nuts, nails scerws etc. and coal tarring two coats (2) coats with best tar applied hot (Rate is inclusive of the cost of the required quantity of tar.) Undressed in floor planks, collars, bracing, standards, wheel guards, struts and railings, runner belts, rail, posts etc

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 i) private land

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. i) private land

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. ii) for grading II

Supplying,filling and laying of Geo-textile bags of Type-A (1.30x0.70 M) made of Geo textile non woven fabric sheets of 400 GSM manufactured from polyster/polly prppelene conforming to relevant ISO standard and conforming to technical specification . Supply and Dumping of Geo Bags in Loose( IN SLOPE AND DRY BED WITHOUT BOAT)

Supply ,Stitching and Laying of Non wooven Geo textile Fabric sheet of 400 gsm

kajalkrdas

Build worth Trade Engineers

Lokman Ali