PERIODICAL SERVICES TO BUILDINGS IN ZONE A AND B AT DAMANA UNDER GE JAMMU

Amount

Material and labour for repair to damaged concrete surface where reinforcement is exposed or concrete / plaster is fallen down from vertical or horizontal surfaces of column, chajjas, fascia, ceiling etc and treated with ZRP bostic chemical and then treated and make good the surface with BOSCOCEM 475/58R BOSTIC as per manufacturer's instructions and match with existing finishes including scaffolding, formwork, T&P etc upto three storey building complete all as specified and as directed. Note: - (i) Work will be executed through authorised applicator. (ii) Work is in patch repair.

Material and labour for complete removal of existing treatment on wall / roof projections including fascia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7" / 9" to make free from dust, loose paint etc by skilled labour complete all as specified and as directed.

Material and labour for preparation of old plastered or unplastered surfaces of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efflorescent salts and trading oil and greasy spot by using suitable chemical and removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirt etc and applying one coat of white wash on old prepared surfaces of walls complete all as specified and as directed.

Material and labour for preparation of old plastered or unplastered surfaces of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efflorescent salts and trading oil and greasy spot by using suitable chemical and removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirt etc and applying one coat of white wash on ceiling complete all as specified and as directed.

Description all as per Ser item No 3.00 here-in-before but applying one coat of oil bound distemper complete all as specified and as directed.

Description all as per Ser item 3.00 here-in-before but applying one coat of cement based paint complete all as specified and as directed.

Material and labour for preparation of old wood and wood based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint etc complete all as specified and as directed.

Material and labour for preparation of old steel surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint etc complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water and removing unserviceable material outside cantt area complete all as specified and as directed by Engineer-in-Charge.

Material and labour for rendering 10mm thick in cement mortar (1:4) on fair faces of concrete surface as in ceiling finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on other than fair faces of brick surface finished fair and even without using extra cement etc. (including all necessary scaffolding, lifting arrangement for external surfaces up to three storey buildings) complete all as specified and as directed.

Material and labour for rendering 15 mm thick in cement mortar (1:6) on fair faces of concrete or brick surface finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparing plastered or unplastered new surfaces of walls and applying three coats of white wash complete all as specified and as directed.

Material and labour for applying two coats of cement based paint including preparation of new plastered surface complete all as specified and as directed.

Material and labour for complete removal of existing treatment of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efflorescent salts and trading oil and greasy spot by using suitable chemical and removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirt etc and applying two coats of oil bound distemper on walls after applying a layer of wall putty to make surface even and smooth complete all as specified and as directed.

Material and labour for complete removal of existing treatment of external walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efflorescent salts and trading oil and greasy spot by using suitable chemical and removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirt etc and applying two coats of weather proof paint exterior grade over one coat of primer on walls making good the depression etc with wall putty surface even and smooth including all scaffolding arrangement up to four storeyed building complete all as specified and as directed.

Material and labour for preparation of old plastered surfaces by scrapping down old treatment, smoke dust, mould, moss and efflorescent salt and removing oily and greassy spots etc and applying texture painting over a coat of wall putty as on wall complete all as specified and as directed.

Material and labour for preparing new plastered surfaces of walls and applying two coats of oil bound distemper complete all as specified and as directed.

Material and labour for water proofing cement based putty @ 1 kg (undiluted) per Sqm of average thickness 1mm over the plastered / old painted surface of wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc by skilled labour as per the following steps:- Step 1: - Mix the putty powder by adding water as per manufacturer's instructions and mix it with putty mixer with the mixing capacity of minimum 2.5 kg putty per minute. Step 2: - Apply the first coat of the prepared mixer with the help of fully automatic airless spray machine of putty application finishing the surface even and smooth in level without any undulations. Step 3: - Allow 6-8 hours time to dry the putty surface.

Material and labour for applying one coat of acrylic water based exterior grade primer @ 0.9 litre (undiluted) / 10 Sqm diluted with water in (1:1) ratio to be applied with fully automatic airless spray machine and allow 6-8 hours to dry the surface for painting of subsequent coats complete all as specified and as directed.

Material and labour for applying water based premium acrylic smooth exterior emulsion of approved colour with silicon additive excellent dirt pickup resistance with low VOC less than 50, Antifungal / Anti Algal properties in two coats @ 1.79 litre (undiluted) / 10 Sqm diluted with water as per manufacturer's instruction applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of minimum 1 litre per minute having a pressure of 3300 PSI. Allow 6-8 hours to dry the surface in between subsequent coats of paint complete all as specified and as directed.

Taking down cement or cement lime plaster on brick or concrete surface including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Material and labour for 15 mm thick rendering in cement mortar (1:4) using waterproofing compound @ 3% by weight of cement on fair faces of brick walls or concrete surfaces and finishing surface even and fair complete all as specified and as directed. Note: - Water proofing compound shall be measured and paid separately under respective item.

Supply only water proofing compound conforming to IS-2645 complete all as specified and as directed.

Notes: - The work for periodical services shall include the following and the rates quoted by the bidders shall include the same. (a) The work pertaining to periodical services shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials like Exterior Emulsion paint, putty etc after approval by the GE. (b) The Contractor shall upload with the documents under cover - I "Memorandum of Understanding" (MOU) with at least one of the manufacturer's mentioned in the contract, failing which the bid shall be liable to be rejected. (c) Use of Scaffolding, trestles, ladders, cradles etc necessary for execution of work and protective measures. (d) Removing of nails, making good holes, cracks etc. (e) Work in patches and in narrow / widths, bands, cornices, pillasters etc and cutting in edge of line where necessary. (f) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes. (g) Washing floors, cleaning glass, joinery, electric fittings, wirings etc. Drops and splashes of paint to be cleaned.

bushan kumar (BID ID -3089477)

M/S TRIKUTA BUILDERS (BID ID -3095609)

Bidder Name

M/S TRIKUTA BUILDERS

bushan kumar

Mehta Enterprises