Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹62.1 LAccepted-AOC | L1 | Accepted-AOC Award of Contract JASKARAN SINGH CONTRACTOR by the committee for the Lower Bidder than others | |
| 2 | L2₹64.3 L+₹2.1 L (3.44%)Rejected-Finance 440 GANDHI CHOWK SADAR BAZAR SHRI MUKATSAR SAHIB | RUPNAGAR | RUPNAGAR | PUNJAB | L2 | Rejected-Finance Higher tender rates from the lowest bidder |
Tender Value
₹54.2 L
EMD Value
₹1.1 L
Closing Date
11 May 2023, 9:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer, Abohar Canal Division Abohar
Executive Engineer, Abohar Canal Division Abohar
Estimate for Reconstruction of V.R Bridge at RD 50922 of Bhagsar Minor
2022_WR_94202_13
E-tender Notice No.32/Abohar Canal Division /2022-
Open Tender
Civil Works - Canal
Item Rate
Sri Muktsar Sahib
Please refer Tender documents.
6 documents required · 6 mandatory
₹2,000
Yes
₹1.1 L
Yes
5 Jun 2023
5 May 2023
11 May 2023
5 May 2023
11 May 2023
5 May 2023
Dismantling of old bridge. C.C 1:4:8
Dismantling of old bridge. Brick work
Dismantling of old bridge. RCC
Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with excavated surplus soil. (Depth upto 3 m)
PCC 1:3:6 (M-10) nominal mix with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by viberation i/c curing for 14 days as per drawing and technical specification.
Laying Plain cement concrete (M-15) with using batching plant, transit mixer and concrete pump in sub structure, complete as per drawing and Technical specifications.
Laying RCC M-30 with using batching plant, transit mixer and concrete pump in Sub structure, complete as per drawing and Technical specifications. (Height upto 5 m)
Laying RCC M-30 for solid slab superstructure using batching plant, Transit mixer and concrete pump including cenetering & shuttering laid in position complete in all respects. (upto 5 m height)
Providing and laying 75 mm thick Wearing coat consisting of 50 mm thick bituminious concrete and 25 mm thick mastic asphalt including tack coat.
RCC M-40 Anti crash railing with footpath including centring and shuttering but excluding steel reinforcement complete in all respects.
Providing and fixing drainage spout complete as per drawing and Technical specification.
Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe-500 grade as per IS 1786-1985, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete. (Foundation & sub structure)
Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe-500 grade as per IS 1786-1985, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete. (Super structure)
Providing and laying filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2 of MORTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall/return wall to the full height compacted to a firm condition complete as per drawing and Technical specification.
Providing weep holes in brick masonry/Reinforced concrete abutment, wing wall/return wall with 100 dia PVC pipe, extending through the full width of the structure with slope of 1V:20H towards drawing face complete as per Drawing and Technical Specifications.
Providing and applying two coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ 1 Litre for 2 sqm.
Cement concrete lining 75mm thick or less ladi manually for irrigation channel using cement concrete M15 with cement content 325 kg/cum is mixed in an automatic computerized batching& mixing plant & Transported to site in transit mixer
Extra for laying earth as per specifications for Compaction of earth in 20 cm layers, dressing, watering the earth and rolling to specifications. (For ramps)
Excavation in soil using hydraulic jcb and hydraulic trolley with disposal upto 5.10 Km Pacca including cutting and loading in trolley, trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections and transporting to embankment location within all lifts and lead.
Providing, laying, spreading and compacting stone aggregates of Grading I to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete as per technical clause 404 of MORT&H specifications.
Providing, laying, spreading and compacting stone aggregates of Grading II to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete as per technical clause 404 of MORT&H specifications
Providing and applying primer coat with bitumen emulsion on prepared surface of granular base i/c clearing of road surface and spraying primer @ 0.85 kg/sqm using mechanical means.
Providing and applying tack coat with bitumen emulsion using bitumen pressure distributor @ 0.25 kg/sqm on the prepared bituminous/ granular surface cleaned with mechanical broom.
Providing and laying dense bituminous macadam (50 mm) with 100-200 TPH hot mix plant producing an average out put of 75 tonnes per hour using crushed aggregate of specified grading premixed with bituminous binder, tansported to site, laid over a previously prepared surface with paver finisher to the required grade level and alignment and rolled as per clause 501.6 and 501.7 to achieve the desired density.
Providing and laying semi dense bituminous macadam (25 mm) with 100-200 TPH hot mix plant producing an average out put of 75 tonnes per hour using crushed aggregate of specified grading premixed with bituminous binder, tansported to site, laid over a previously prepared surface with paver finisher to the required grade level and alignment and rolled as per clause 501.6 and 501.7 to achieve the desired density.
Providing and laying of hot applied thermoplastic compound 2.5 mm thick i/c reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be leave uniform and free from streaks and holes. (4'' thick)
Hazard maker sign board 300 x 900 mm rectangular as per IRC 67 - 2001 with retro reflective high intensity microprismatic grade sheeting fixed over 2 mm thick aluminium sheet with 25 x 25 x 3 mm angle iron frame supported on a mild steel angle iron post 65 x 65 x 6 mm without cost of definition plate firmly fixed to ground in foundation cconcrete 1:2:4 of size 0.45 x 0.45 x 0.60 m for vertical post complete as per technical clause 801 MORT&H specifications.
Cautionary sign board 600 x 600 x 600 mm triangular as per IRC 67 - 2001 with retro reflective high intensity microprismatic grade sheeting fixed over 2 mm thick aluminium sheet with 25 x 25 x 3 mm angle iron frame supported on a mild steel angle iron post 65 x 65 x 6 mm without cost of definition plate firmly fixed to ground in foundation cconcrete 1:2:4 of size 0.45 x 0.45 x 0.60 m for vertical post complete as per technical clause 801 MORT&H specifications.
Mandatory sign board 600 mm circular as per IRC 67 - 2001 with retro reflective high intensity microprismatic grade sheeting fixed over 2 mm thick aluminium sheet with 25 x 25 x 3 mm angle iron frame supported on a mild steel angle iron post 65 x 65 x 6 mm without cost of definition plate firmly fixed to ground in foundation cconcrete 1:2:4 of size 0.45 x 0.45 x 0.60 m for vertical post complete as per technical clause 801 MORT&H specifications.
Informatory sign board 600 x 600 mm square as per IRC 67 - 2001 with retro reflective high intensity microprismatic grade sheeting fixed over 2 mm thick aluminium sheet with 25 x 25 x 3 mm angle iron frame supported on a mild steel angle iron post 65 x 65 x 6 mm without cost of definition plate firmly fixed to ground in foundation cconcrete 1:2:4 of size 0.45 x 0.45 x 0.60 m for vertical post complete as per technical clause 801 MORT&H specifications.
Providing and filling joint sealing compound as per drawing and Technical specifications.
Providing and Fixing 2 mm corrugated copper plate in expansion joints, complete as per drawing and Technical specifications.
Providing and fixing in position 20 mm thick premoulded joint filler in expansion joint for fixed ends of simply suportsd spans not exceeding 10 m to cater for a horizontal movement up to 20 mm, covered with sealant complete as per drawing and technical specifications.
Providing and fixing solar cat eyes.
Providing & fixing 25mm thick compressible fiber board in expansion joint complete as per drawing and technical specification.
Excavation in soil using hydraulic jcb and hydraulic trolley with disposal upto 3.60 Km including cutting and loading in trolley, trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections and transporting to embankment location within all lifts and lead. (1st 2.80 km pucca, rest katcha)
Extra for laying earthwork as per specifications for compaction in 20 cm layer and dressing including cost of rolling and watering as per specifications.
Earthwork for lip cutting for irrigation of channel inclusive of all allowances leads and dressing 0 to 1.5 mtr depth.
Earthwork for lip cutting for irrigation of channel inclusive of all allowances leads and dressing 1.50 to 3.00 mtr depth.
Earthwork excavation in foundation, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and side of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within a lead of 30 metres.
Laying 1st class brick lining 75 mm thick laid in 1:3 CSM over 10 mm thick cement Plaster 1:3 over 12.5 mm thick cement plaster 1:5 over dressed sub grade (for side slopes) including supply carriage, loading and unloading of material from source to site of work complete in all respects as per PWD specification.
Laying 1st class brick on edge coping 229 mm wide and 115 mm thick in cement sand mortar 1:3 complete in all respects as per PWD specification.
Extra allowance for providing templates in curved portions of lining.
Extra allowance for scaffolding in lining for side slopes only.
Dismantling brick work, tile masonry or tile lining (in cement mortar).
Making Bore & installation of pumping set for dewatring arrangement complete in all respect@ Rs. .
Providing running & maintenance of pumping set 8 H.P/Generator set for dewatring arrangement complete in all respect. @ Rs.
Laying Reinforced cement concrete (M-25) with using batching plant, transit mixer and concrete pump in Sub structure, complete as per drawing and Technical specifications.(Height upto 5 m)
Any other item
DEEPAK KUMAR CONTRACTOR
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .