Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.2 LAccepted-AOC | L1 | Accepted-AOC Work completed by the contractor on 9-01-2022 | |
| 2 | L2₹14.2 L+₹1.0 L (7.86%)Rejected-Finance | L2 | Rejected-Finance 2nd lowest | |
| 3 | L3₹15.4 L+₹2.2 L (16.6%)Rejected-Finance VILL GOHONANA PO MEHLA TEHSIL DISTT CHAMBA HP | CHAMBA | HP | L3 | Rejected-Finance 3rd lowest | |
| 4 | L4₹15.5 L+₹2.3 L (17.5%)Rejected-Finance VPO CHAKLOO TEHSIL CHAMBA DISTT CHAMBA HP | CHAMBA | HIMACHAL PRADESH | 176207 | L4 | Rejected-Finance 4th lowest |
Tender Value
₹9.5 L
EMD Value
₹19,020
Closing Date
5 Aug 2021, 5:00 pmClosed
Executive Engineer Chamba Division HPPWD Chamba
Executive Engineer Chamba Division HPPWD Chamba
Repair of Govt. Degree College at Chamba H.P Providing fencing to open land , grill in verandah and outside painting
2021_PWD_50497_1
NO.PWC-WA-II- 4999-5099 dated 23.7.21
Open Tender
Civil Works
Item Rate
30 days
Chamba
Please refer Tender documents.
10 documents required · 10 mandatory
₹350
₹19,020
13 May 2022
28 Jul 2021
6 Aug 2021
28 Jul 2021
5 Aug 2021
28 Jul 2021
Amount
Earth work in excavation for all type of structure such as retaining walls, breast walls, culverts, drains and parapets etcetera in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock chiseling / wedging out rocks ( where blasting is prohibited) as per drawings and MORD technical specification clause 305.1 and as per the directions of the Engineer-in-Charge including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto any lead and upto any lift including dressing of sides and bottom and back filling in trenches with excavated Suitable / approved materials to the original surface in layers not exceeding 150mm (one hundred fifty millimetre). Compacted thickness including shoring and strutting and pumping and bailing out water ( surface and sub soil water) upto any depth and any quantum of water including cleaning of slush which may arise out during dewatering as per directions of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidental. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated cement concrete 1:6:12 (one cement isto six sand isto twelve graded crushed stone aggregate 40 mm (forty millimetre) nominal size) and curing complete excluding cost of centring and shuttering in foundation and plinth including all taxes,GST, carriage of material, within all leads and lifts within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.
Random rubble masonry/polygonal rubble masonry (uncoursed / brought to courses ) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement isto six sand isto twelve graded stone agreegate 20mm (twenty millimetre) nominal size) at plinth level in cement mortar 1:6 (one cement isto six sand) as per the directions of the Engineer-in-charge including all taxes and carriage of material within all leads and lifts and other incidentals.
Steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a primming coat of red lead paint in gratings framed gaurd bars, ladders, railing, brackets and similar works as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .
Supply and fixing galvanized steel bar-bed wire (IS:278-1962 Type-I) weighing 9.38 kg per 100 metres (minimum) straining and fixing to any type of standard rails, straining bolts including securing with and provision of galvanized mild steel wire, staples or Steel pins etc. as directed (posts and struts of wood concrete, steel etc. and straining bolts shall be paid for seperately) as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .
Providing and fixing M.S. plain grills 10x10mm (ten into ten millimetre) square or round bars in combination of 20x4mm (twenty into four millimetre) M.S. flat as per detail of required pattern in frames of windows etc.with M.S.Flats, square or round bars with round headed bolts and nuts or by screws as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .
Painting two coats(excluding priming coat)on new steel and other metal surfaces with aluminium paint,brushing to give an even shade including cleaning the surface of the dirt,dust and other foreign matter as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .
Applying priming coat over new steel & other metal surfaces with ready mixed priming paint brushing red lead,Red-oxide/zinc oxide chrome. after & including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .
Applying Birla white wall care putty over plastered surface after thoroughly brushing the surface free from mortar drops, dust loose materials and other foreign matter sand papered smooth to give final matter finish to the surface complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .
Finishing walls with Apex weather proof exterior grade emulsion of Asian paint or exterior emulsion of NAROLAC SURKSHA as per approved shade on undecorated wall surface (two or more coats) to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matter etc. including sand paper smooth complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .
Providing and fixing to wall, ceiling and floor galvanised mild steel tubes (medium grade) tube fittings and clamps including making good the wall, ceiling and floor 15 mm (fifteen millimetre) nominal bore as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .
Providing and fixing C.P. brass bib tap of continental series of Jaquar / contessa of series of hindware/ ocean series of Cera with 15 mm (fifteen millimetre) dia with capaston head as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .
Providing and fixing in position water lifting pump (toollu pump) having 1.00 (one) horse power capacity of Kirloskar or equivilent make ISI mark including all necessary fitting required at site complete in all respect as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .
Providing & Fixing anodized aluminium work in shutter of door, windows & Ventilator fixed partition with 18 gauge (eighteen) thick sheet of aluminium 63 x 38 mm section, half panel of 5 (five millimetre) mm balelite sheet and 6mm (six millimetre) thick plain glass complete air tight by providing neorpean gasket or silicon layer as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Mayank Mahajan
sudhir kumar govt contractor
M/s Sunny Mandla
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .