CONSTRUCTION OF CSC NEAR JAMIA MASJID AT RAZWEN.

Earth work in Trench excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m 2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil

Providing/Laying Stone soling Nallah hand packed on level in foundation trenches including carriages of Stones.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and laying in position 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level

Reinforcement for RCC works incld. straightening bending cutting placing in position and binding all complete (TMT Bars)

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns etc.

Centering and shuttering including strutting, propping etc. suspended floors, roofs, landings, balconies and access platforms.

Centering and shuttering including strutting, propping etc. and removal of form for: Edges of slabs and breaks in floors and walls Under 20 cm wide.

S/S of Boulder/GSB filling under rooms floors incl. watering and ramming with hand rammer including carriage.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand).

Extra for brick work in superstructure above plinth level upto Floor V Level (by manual means).

Half brick masonry with common burnt clay (non-modular) bricks of class designation Cement mortar 1:3 ( 1 cement : 3 coarse sand)

Providing and fixing aluminum work for doors, windows, ventilators and partitions (frame) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. Powder coated aluminum (minimum thickness of powder coated 50 microns). Incl. shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required, 4mm Thick ACP Sheets & all other accessories (Handles, Tower-Bolt, Al-Drop etc.) - (14-Guage Material)

Providing/ fixing in position Pre cast Cement concrete Jali 1:2:4: mix reinforced with 6 mm dia mild steel wire incl. cement mortat of mix 1:3 mix.

P/A 12 mm thick cement plaster 1:6 (1cement:6 fine sand)

P/A 12 mm Plaster of 1: 4 (1 cement: 4 fine sand) mix finished with neat coat of Cement Slurry.

P/L cement concrete flooring (1:2:4) mix etc complete 50 mm thick with 20mm nominal size stone aggregate

P/A white cement based putty of average thickness 2mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete.

Finishing exterior walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade two or more coats @3.84kg/10sqm.

Providing and fixing 1st quality ceramic glazed tiles of size 600x600mm conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeer in-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete

Providing and laying vitrified floor tiles in sizes 600x600mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete

Carraige of Fine Aggregate from Source to Site. 20 Km

Carraige of Coarse Aggregate from Source to Site. 20 Km

Carraige of Bricks from Source to Site. 20 Km

Sanitary Fittings and Disposal System: Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe, 16mm OD(SDR-7.4)

P/F of PPR fittings of standard quality and make(c-grade) including jointing/ testing complete. (PPR Elbow, Union, Tee, Socket, etc 20mm)

P/F of PPR fittings of standard quality and make(c-grade) including jointing/ testing complete. (Tank nipples 20mm dia)

Providing and fixing of PPR gate value with C.I wheel of approved quality (ISI mark). (25mm)

P/F of following PVC pipes & fittings of standard quality & make (B type) Prince or equivalent incl.including PVC waste fittings (Collars, Tees's, Elbows etc.) jointing/testing complete (100mm)

P/F of following PVC pipes & fittings of standard quality & make (B type) Prince or equivalent incl.including PVC waste fittings (Collars, Tees's, Elbows etc.) jointing/testing complete (75mm)

P/F PVC fittings of standard quality type Floor Trap (100mm)

P/F PVC fittings of standard quality type Tee (100mm)

P/F PVC fittings of standard quality type Reducer (100mm to 75mm)

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1cement :4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design. 19.26.1 With common burnt clay (non modular) bricks of class designation 7.5

P/F of water closet squarting pan (W.C) Indian Type Orrisa pattern white vitereous china with 100mm pvc "B type" P or S trap, 10 litre capacity low level flushing cistern of approved make with flush pipe, manually controlled device (handle Lever) with all fittings and fixtures complete, incl. cutting and making good the walls and floors whenever required (580x440mm with intergal type foot rest)

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and rackets, cutting and making good the walls wherever required:-White Vitreous China Wash basin size 550x400 mm with a 15 mm single hole basin mixer incl white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

P/F of looking mirror of superior glass (of approved quality), rectangular size ( 1200x600)mm with plastic moulded frame of approved make and shade with 6mm thick hard board backing.

P/F PVC waste pipe for counter basin/ wash basin (32mm)

P/F CP Brass Bib Cock 15mm

P/F CP Floor Grating (100mm)

P/F CP Angle valve 15mm Nominal Bore concealed type Jaquar or Equivalent.

P/F PVC water storage tank Tripple layer Sintex or equvalent make

S/L of precast RCC rings of 6inch width and 3'dia and 1.25 inch thick for soakage and septic tank incl earthwork in excavation, RCC cover in M20 grade with reinforcement for soakage pits & , incl. disposal of excavated earth beyond the site, disposed earth is to be leveled and neatly dressed incl. dewatering of trenches during execution. (if required).

P/F of lighting points as well as lighting circiut incl. point wiring through conduits with 1.5 Sqmm Multi Standard copper wire of approved make for light points incl. cutting chases and making good the wall, cost of 6 amp switch, conduits, switch pannel, incl. resurfacing of wall with POP complete job.

Add provision for cost of photographs & Citizen Information Board.