Modification works in High Temperature test rig of Design area

Following works are to be carried out at Design area:

Supply and Installation of 20 hp Self Priming pump with motor and base frame, Three Phase, Power rating 15 kw, With suction and discharge 6" and impeller dia 296 mm. Motor IE 2 Energy efficient, With IP 55.

Supply and Installation of FRP Cooling tower 400 TR,

TYPE FRP BOTTLE TYPE 01 CELL

CAPACITY 400 TR

HEIGHT 4500 MM

DIA 5400 MM

FAN DIA 2400 MM X 01 SET X 06 BLADE (HEAVY DUTY)

MOTOR SPECIFICATION 12 HP 720 RPM X 01 SET

WATER FLOW RATE 4000 LPM

MOTOR TYPE IP55/ 415V/ 50HZ/ 3 PHASE/ FLANGE TYPE OPERATING WEIGHT 4400 KG.

PUMP HEAD 3200 MM

DRIFT LOSSES 0.02% MAX

EVAPORATION LOSSES 0.02% (Max)

WET BULB TEMP 28˚ C

INLET TEMP 38˚ C

OUT LET TEMP 32˚ C

APPROACH 04˚ C

RANGE 06˚ C

INLET PIPE SIZE 06”

OUTLET PIPE SIZE 06”

MAKE-UP 01”

DRAIN 01”

OVERFLOW 2.5”

Supply and Installation of Pot Stainer 6 inch

Supply and Installation of MS C Class Pipeline 6 inch.

Supply and Installation of NRV 6 inch

Supply and Installation of Butterfly valve 6 inch

Supply and Installation of Flange 6 inch

Supply, Fabrication and Installation of MS Base frame for Pump

Supply and Installation of Bend 6 inch Heavy duty

Supply and Installation of Nut bolts

Dismantling and removing of old cooling tower 400 TR and shifitng to scrap yard,

Dismantling of old rusted and damaged MS pipeline and shiting to scrap yard.

Dismantling of old damaged pump motor with base frame and coupling and shifting to scrap yard.

Painting of new MS pipeline with support with one coat Primer and two coat Paint.

Supply and installation SS Pressure Gauge dial size 4 inch with SS Syphon and ball valves.

Supply and Installation of MS pipe support heavy duty

Total

Applicable GST @18%

Total including GST

Amount (In words):

Name of Vendor: M/s …………………………………….

The Tenderers are requested to read the following before quoting.

1. Basic Rate quoted shall be exclusive of GST.

2. As per section 2(11a) of GST Act, this work falls under "Works Contract". Accordingly this will be considered as "Services" and applicable GST is 18%. Tenderers shall note and quote accordingly.

3. Any change in GST +/- during the currency of contract shall be on HAL account. The Tenderer shall abide by prevailing GST act.

5. Bidder shall not pay wages less than the CLC minimum wages and also future increase of VDA applicable from time to time to the labour deployed for subject work. Further, ESI, EPF, EDLI, Administration charges are to be paid by contractor. Accordingly, Bidders have to quote.

6. Contract value & rates as agreed upon in the contract are fixed throughout the contract period, including extended period if any.

TECHNICAL BID

Tender No.

Bidder's Name

Bidder's Address

Compliance Sheet (To be filled by Bidders)

Submission of EMD (Scan Copy & Original both, Refer Section-3). Particulars of EMD i) Wire Transfer/ Demand Draft /Bankers Cheque No/Transaction No ii) Date iii) Name of Bank iv) Address of Bank v) Validity of DD/Bankers Cheque

Submission of Documents as detailed below:

Compliance of Terms and Conditions as per NIT.

I /We hereby confirm that all information/attachment/data etc submitted with offer are true and correct. I/ We will be solely responsible for authenticity of submitted documents/data.

Authorized Signatory (Name & Designation)